Zich
Legendary
 Offline
Activity: 1190
Merit: 1000
|
 |
November 19, 2014, 08:08:41 AM |
|
Huhu, waiting for new firmware release  |
|
|
|
|
PaulLaughton
Newbie
Offline
Activity: 11
Merit: 0
|
|
November 20, 2014, 06:15:24 PM |
|
Has my order WDCXLFPXA been shipped yet? I placed this order for a HEX16E on the 4th of August, was told about the problems with it and it should be shipped at the end of September. Since then, nothing, not even an reply to my emails. My previous orders arrived ok so why not this one? I want my miner.
Your order + compensation will be out of the door tomorrow Thanks, can you let me have the tracking number Still waiting for that tracking number |
|
|
|
|
kea808
Member
Offline
Activity: 115
Merit: 10
“Create Your Decentralized Life”
|
|
November 20, 2014, 06:16:32 PM |
|
Has my order WDCXLFPXA been shipped yet? I placed this order for a HEX16E on the 4th of August, was told about the problems with it and it should be shipped at the end of September. Since then, nothing, not even an reply to my emails. My previous orders arrived ok so why not this one? I want my miner.
Your order + compensation will be out of the door tomorrow Thanks, can you let me have the tracking number Still waiting for that tracking number Aren't we all... |
|
|
|
Zich
Legendary
Offline
Activity: 1190
Merit: 1000
|
|
November 21, 2014, 01:38:18 AM |
|
Has my order WDCXLFPXA been shipped yet? I placed this order for a HEX16E on the 4th of August, was told about the problems with it and it should be shipped at the end of September. Since then, nothing, not even an reply to my emails. My previous orders arrived ok so why not this one? I want my miner.
Your order + compensation will be out of the door tomorrow Thanks, can you let me have the tracking number Still waiting for that tracking number Aren't we all... No, i am not |
|
|
|
|
PaulLaughton
Newbie
Offline
Activity: 11
Merit: 0
|
|
November 21, 2014, 10:00:12 AM |
|
Has my order WDCXLFPXA been shipped yet? I placed this order for a HEX16E on the 4th of August, was told about the problems with it and it should be shipped at the end of September. Since then, nothing, not even an reply to my emails. My previous orders arrived ok so why not this one? I want my miner.
Your order + compensation will be out of the door tomorrow Thanks, can you let me have the tracking number Still waiting for that tracking number Aren't we all... No, i am not Lucky you |
|
|
|
|
PaulLaughton
Newbie
Offline
Activity: 11
Merit: 0
|
|
November 24, 2014, 05:29:40 PM |
|
Has my order WDCXLFPXA been shipped yet? I placed this order for a HEX16E on the 4th of August, was told about the problems with it and it should be shipped at the end of September. Since then, nothing, not even an reply to my emails. My previous orders arrived ok so why not this one? I want my miner.
Your order + compensation will be out of the door tomorrow Thanks, can you let me have the tracking number Still waiting for that tracking number Aren't we all... No, i am not Lucky you Wow, I've been given a new tracking number and the couriers have picked it up today. I might even get my miner by Christmas! |
|
|
|
|
|
marto74 (OP)
|
|
November 24, 2014, 10:13:07 PM |
|
Has my order WDCXLFPXA been shipped yet? I placed this order for a HEX16E on the 4th of August, was told about the problems with it and it should be shipped at the end of September. Since then, nothing, not even an reply to my emails. My previous orders arrived ok so why not this one? I want my miner.
Your order + compensation will be out of the door tomorrow Thanks, can you let me have the tracking number Still waiting for that tracking number Aren't we all... No, i am not Lucky you Wow, I've been given a new tracking number and the couriers have picked it up today. I might even get my miner by Christmas! You will for sure . And the package contains a small surpise |
|
|
|
|
TeQ99
|
|
November 25, 2014, 02:07:50 PM |
|
I recently got a hex4m board fresh out of the technobit packing.
i'm wondering how do i attach the fan on the base heatsink.
|
|
|
|
|
marto74 (OP)
|
|
November 25, 2014, 02:22:26 PM
Last edit: November 25, 2014, 02:34:42 PM by marto74 |
|
I recently got a hex4m board fresh out of the technobit packing.
i'm wondering how do i attach the fan on the base heatsink.
Hi You should have treaded bars in the package look here http://technobit.eu/hex4M_set.pdf |
|
|
|
|
marto74 (OP)
|
|
November 25, 2014, 08:25:07 PM
Last edit: November 25, 2014, 10:07:33 PM by marto74 |
|
|
|
|
|
|
TeQ99
|
|
November 25, 2014, 10:35:46 PM |
|
I recently got a hex4m board fresh out of the technobit packing.
i'm wondering how do i attach the fan on the base heatsink.
Hi You should have treaded bars in the package look here http://technobit.eu/hex4M_set.pdfNo threaded bars included but i have some from a few broken hex miners i have around here. Will try it. The hex16 board looks very nice. Any specs? fan noise level? power consumption? Can i test it.  |
|
|
|
|
marto74 (OP)
|
|
November 25, 2014, 10:40:27 PM |
|
2 x 120 mm Fans , same like the one you have with hex4m , So you can compare.
380 GHs with 275 W @ the wall with 88-90 % eff PSU
|
|
|
|
Zich
Legendary
Offline
Activity: 1190
Merit: 1000
|
|
November 26, 2014, 09:54:17 AM |
|
I am happy to see this kind of miner produced again |
|
|
|
|
|
|
|
TeQ99
|
|
November 26, 2014, 09:46:30 PM |
|
To make it a desktop model keep it silent. To bad the gentle typhone fans are not available anymore. Liquid cooling maybe.  |
|
|
|
cannachris
Sr. Member
Offline
Activity: 406
Merit: 250
cats love crypto | 911 truth @checktheevidence.com
|
|
November 27, 2014, 07:35:01 AM |
|
I am having huge problems with one of my technobit router losing connection with it's 6 hex4m boards, (that is after all 7 blew out my previous 13 port hub in 2 days) and after a day or two i am left with all the lights on the boards blinking as the should but the router only hashes with two or three (or 0) of them. Do you have a hub you could recommend??? because I am losing lots of hashpower like this. My routers currently have 0.3.9 does 0.4.0 have any improvements for the hex4m miners? Any other solutions?
BTW the hex4m board that i bought from you from the blackarrow fiasco through jimmothy has decided that it will only work when at 1024/832 but even then it produces 75+% stale shares (@ around 396 Gh) and crashes after about 1-10 hours on my pc with cgminer. I can't even run it on any of my routers (I have 2 but one has this problem way more often than the other, but there the hub i bought for both is still working and i do not have to use 6 port hub but even that router loses a miner sometimes for a few hours or a day and sometimes until reset)so can I get a RMA for that hex4m only running at 832 mV? The problem with that would be that it has no order reference number since it is not shown in my technobit.eu account.
PLEASE HELP me are my boards faulty???
|
|
|
|
|
marto74 (OP)
|
|
November 27, 2014, 07:51:55 AM |
|
I am having huge problems with one of my technobit router losing connection with it's 6 hex4m boards, (that is after all 7 blew out my previous 13 port hub in 2 days) and after a day or two i am left with all the lights on the boards blinking as the should but the router only hashes with two or three (or 0) of them. Do you have a hub you could recommend??? because I am losing lots of hashpower like this. My routers currently have 0.3.9 does 0.4.0 have any improvements for the hex4m miners? Any other solutions?
BTW the hex4m board that i bought from you from the blackarrow fiasco through jimmothy has decided that it will only work when at 1024/832 but even then it produces 75+% stale shares (@ around 396 Gh) and crashes after about 1-10 hours on my pc with cgminer. I can't even run it on any of my routers (I have 2 but one has this problem way more often than the other, but there the hub i bought for both is still working and i do not have to use 6 port hub but even that router loses a miner sometimes for a few hours or a day and sometimes until reset)so can I get a RMA for that hex4m only running at 832 mV? The problem with that would be that it has no order reference number since it is not shown in my technobit.eu account.
PLEASE HELP me are my boards faulty???
Hi, It may be the router itself. Nut there might be an issue with hex usb port. use any passive hub and tp-link connect everything and please give TW access inside the LAN where the router is. I'll have a look adn we'll decide whenever it is hub/tp-link issue or board needs RMA Martin |
|
|
|
cannachris
Sr. Member
Offline
Activity: 406
Merit: 250
cats love crypto | 911 truth @checktheevidence.com
|
|
November 27, 2014, 08:40:37 AM |
|
I am having huge problems with one of my technobit router losing connection with it's 6 hex4m boards, (that is after all 7 blew out my previous 13 port hub in 2 days) and after a day or two i am left with all the lights on the boards blinking as the should but the router only hashes with two or three (or 0) of them. Do you have a hub you could recommend??? because I am losing lots of hashpower like this. My routers currently have 0.3.9 does 0.4.0 have any improvements for the hex4m miners? Any other solutions?
BTW the hex4m board that i bought from you from the blackarrow fiasco through jimmothy has decided that it will only work when at 1024/832 but even then it produces 75+% stale shares (@ around 396 Gh) and crashes after about 1-10 hours on my pc with cgminer. I can't even run it on any of my routers (I have 2 but one has this problem way more often than the other, but there the hub i bought for both is still working and i do not have to use 6 port hub but even that router loses a miner sometimes for a few hours or a day and sometimes until reset)so can I get a RMA for that hex4m only running at 832 mV? The problem with that would be that it has no order reference number since it is not shown in my technobit.eu account.
PLEASE HELP me are my boards faulty???
Hi, It may be the router itself. Nut there might be an issue with hex usb port. use any passive hub and tp-link connect everything and please give TW access inside the LAN where the router is. I'll have a look adn we'll decide whenever it is hub/tp-link issue or board needs RMA Martin With a passive hub you mean a hub without external power supply?Then I'll have to order a new 13 port one and not use the power adapter so if that is the case we will have to wait a few days before i have the new hub. |
|
|
|
|
marto74 (OP)
|
|
November 27, 2014, 08:41:43 AM |
|
Yes
|
|
|
|
|
TeQ99
|
|
November 27, 2014, 12:43:55 PM |
|
I am having huge problems with one of my technobit router losing connection with it's 6 hex4m boards, (that is after all 7 blew out my previous 13 port hub in 2 days) and after a day or two i am left with all the lights on the boards blinking as the should but the router only hashes with two or three (or 0) of them. Do you have a hub you could recommend??? because I am losing lots of hashpower like this. My routers currently have 0.3.9 does 0.4.0 have any improvements for the hex4m miners? Any other solutions?
BTW the hex4m board that i bought from you from the blackarrow fiasco through jimmothy has decided that it will only work when at 1024/832 but even then it produces 75+% stale shares (@ around 396 Gh) and crashes after about 1-10 hours on my pc with cgminer. I can't even run it on any of my routers (I have 2 but one has this problem way more often than the other, but there the hub i bought for both is still working and i do not have to use 6 port hub but even that router loses a miner sometimes for a few hours or a day and sometimes until reset)so can I get a RMA for that hex4m only running at 832 mV? The problem with that would be that it has no order reference number since it is not shown in my technobit.eu account.
PLEASE HELP me are my boards faulty???
I hope i don't get your problems when i hookup my hex4m this weekend. I was planning to make it 100% liquid cooled. I got the 4 cpu blocks rad fans etc. but i will first start with aircoolers to test the board... Any tips martin? settings etc i use a mr-3020 |
|
|
|
|
Poll
