[ANN] ¤ DMD Diamond 3.0 | Scarce ¤ Valuable ¤ Secure | PoS 3.0 | Masternodes 65%

[cryptonit]

As I see, there will be official Linux binary of 2.1.0.1 for ARM, but what about i386 and amd64? With last release I had to compile by myself. Will it be the same with the new release?

we provide no pre-compiled linux wallet at all
we see linux as a expert user platform
who run it is also able to compile
there is to many different linux branches to maintain it with precompiled wallets

we will provide a windows 32 bit precompiled QT wallet
(this way also supporting staking on cheap 32bit windows 10 tablets)
and a pre-compiled mac QT wallet

for raspberryPi2 and other rokos supported hardware there will be the DMD wallet 2.1.0.1 included into the new ROKOS v6 Flavors release

[shveicar]

Now we can already see one node with the new wallet in a common network 

[Galactus]

it would be fine if with a new wallet also the new price came to 1 dollar (or 0.5)
I have long bored at this price ...

[wiser]

I'm still on the old wallet. My wallet hasn't minted since 5/7. I'm not worried, but wondering if the new wallet is affecting the old one's ability to mint. I will update to new as soon as it's released.

[mos6502]

Greetings! First-time posting but long-time lurking here at the ANN. I've been mining and minting DMD 24/7 for roughly 18 months. I wish I had good news to share with my introduction, but unfortunately I am here today out of concern. Hopefully someone from this fine community can offer some insight or perhaps point me towards a more appropriate venue to seek answers.

The pretext: I have only one DMD wallet and use the default address provided. I have never generated other addresses within this wallet nor have I ever used a second wallet. In early March when Miningfield went offline, I began solo mining. The wallet and miner have always worked flawlessly and I was quite content with the rewards.

Today I noticed that every solo-mined POW payout I received over the last 2 months apparently sits at a new address. Actually a couple addresses. These addresses do not appear in the "Receive coins" list but are displayed as the receiving address for each block found. I looked at these addresses in the explorer and a Guesstimated Wallet of "none" is reported for each.

I ran "checkwallet" and "repairwallet". I make regular wallet backups and tried various dates. I tried the December blockchain from the link on page 1 and it syncs fine. I found no evidence of system intrusion, tampering, or corruption. The miner settings have not changed and all references are to the original default address, yet payouts still go (apparently at random) to one of these new addresses. I even tried a fresh install on a different machine and the anomalous addresses still appear in the ledger. What variables have I missed?

The wallet displays the correct balance but I'm hesitant to try and move these coins around without better understanding. This seems coincidental with all the v2.1 testing going on recently. How is it possible to receive coins with an address not generated by the wallet?

Any and all suggestions would be greatly appreciated. Thanks in advance.

-mos

[utahjohn]

your wallet is fine, those addresses ARE generated by the wallet Turn on coin-control and you can safely move them to main address ...Better to consolidate them into larger piles anyway, they will stake more easily ...

[mos6502]

Ah yes. Thank you for the quick reply.

I'd not visited Coin Control before. I'm a bit embarassed it took me 2 months to notice the new addresses. The miner is really low maintenance so I spend little time monitoring it.

So is there really no way to direct solo-mining payouts to a specific address? How does the wallet select the address to pay to? Sometimes the reward goes to one of the new addresses and other times to another.

Thanks again.

-mos

[M1ST3R]

Ah yes. Thank you for the quick reply.

I'd not visited Coin Control before. I'm a bit embarassed it took me 2 months to notice the new addresses. The miner is really low maintenance so I spend little time monitoring it.

So is there really no way to direct solo-mining payouts to a specific address? How does the wallet select the address to pay to? Sometimes the reward goes to one of the new addresses and other times to another.

Thanks again.

-mos

Try adding miningaddress=TheAddressThatYouWantToMineTO  into your diamond.conf file.

Have not try it with Diamond but it works fine on other coin wallets

[cryptonit]

dmd slack user got the 2.1.0.1 wallet already

maybe a reason to join there and be always up2date first?

https://dmdcoin.signup.team/

for the rest alex (popshot) will provide a nice release message in the evening



after the release is before the release

finished 2.1.0.1 means start with development of 3.0.0.0

[TagBot]

Great job! Thank you!!!
To the Moon!!!

[cryptonit]

i see no hype reason

just stay clever as always

buy cheap DMD below 0.30$ for sure
easy up to 0.35-0.40$ if u think longterm too

and enjoy 25% POS income

no other POS coin i know can stay as $ price stable as DMD with a above 20% POS rate

[BogdanCo]

dmd slack user got the 2.1.0.1 wallet already

maybe a reason to join there and be always up2date first?

https://dmdcoin.signup.team/

for the rest alex (popshot) will provide a nice release message in the evening



after the release is before the release

finished 2.1.0.1 means start with development of 3.0.0.0

Thank you! Another job well done!
When we can activate the stake boost for the Legendary addresses? It feels ages since I minted something...

[cryptonit]

Thank you! Another job well done!
When we can activate the stake boost for the Legendary addresses? It feels ages since I minted something...

start minting ur legendary at 16th may

like gamers know "never play at patch day"

i would say stressfree is open legendary10 wallets for POS one day after the trigger go active

i dont expect any issues
thats why we did test that long

but just in case to be on save side with ur coin age
wait until 16th

but then dont forget give us feedback about the WOW effect when mint a "legendary" POS block

[BogdanCo]

Thank you! Another job well done!
When we can activate the stake boost for the Legendary addresses? It feels ages since I minted something...

start minting ur legendary at 16th may

like gamers know "never play at patch day"

i would say stressfree is open legendary10 wallets for POS one day after the trigger go active

i dont expect any issues
thats why we did test that long

but just in case to be on save side with ur coin age
wait until 16th

but then dont forget give us feedback about the WOW effect when mint a "legendary" POS block

According to my calculations when it will mint it should be around 400-450 DMD's in a POS block. Can wait to see it. You all will receive a WOW effect here )

[cryptonit]

congrats boy!

but we today get DMD Wallet 2.1.0.1

[popshot]

Dear Diamond Community,

Thank you for your patience and understanding. Software development yet again proved to be a lengthy and complicated process, but we are finally releasing the new instalment of our beloved DMD Diamond wallet. As this long awaited release is now out, we set our goals and aspirations to delivering you Diamond 3.0 in the coming months. But for now, we hope you’ll enjoy this new software as much as we do.

And of course this release is also dedicated to all those who are holders of Legendary 10 Unique Cypto Assets. Their investment helped to push the sails of DMD Diamond ship to the new seas of opportunity and development. It’s the dawn of the Legends!

This release packs several exciting improvements:

- The bug that allowed for sending transactions in ‘unlocked for minting’ mode has been fixed. Now you need to enter a password each time you want to send coins.
However, as a known side effect of the fix, when unlocking the wallet in ‘unlocked for minting’ mode the lock button icon will stay "locked" at all times. If you press the unlock button the second time it would act correctly and will lock the wallet.
- Group stake trigger value increased from 100DMD to 150DMD which allows minting more old small coin piles faster.
- Scrape address functionality has been added (it allows setting up a target address for PoS rewards). A new target address (can be allocated separately to each address) can be set in GUI under the Receive Coins tab. It can be changed by double clicking on scrape address column. Please mind that if you change scrape addresses you need to restart the wallet for the changes to take effect.
- Stake Boost code implemented for Legendary 10 addresses and time limited promotion addresses which would go active on Tuesday 15 May 2016 12:00:00 UTC.
- PoW coin support share (0.01 DMD each block) has been removed and replaced with a coin support stake boosted address for similar effect.
- Automated coin selection for TX and minting, additional input is optimized for optimal utilisation of coin age.
- The code to enable same mining behaviour as [GRS] GroestlCoin was implemented but set to inactive due to community feedback and our long term fundamental developmental shift planned for DMD Diamond 3.0.
- The estimated ‘time to mint’ tool tip has been removed.
- Updated wallet version to 2.1.0.1.
- Newest OpenSSL has been used.
 
Please note that this update is mandatory with the fork date set to 15 May 2016 or more precisely everyone should update before block 1549200.
Please see Block Explorer for the current block height: https://chainz.cryptoid.info/dmd/

MINING POOLS: You need to adapt your pool software and remove coin support share after block 1549200.

LEGENDARY 10 holders: Please do not start minting before 16th May. After that date glorious days lay ahead and you can finally enjoy the boosted staking.
 
Source: https://github.com/DMDcoin/Diamond
Windows QT: https://github.com/DMDcoin/Diamond/releases/download/Diamond2101/diamond-qt-2101.zip

Enjoy!

[shveicar]

Great news.
much has been done.
Thank you all for your support.

[utahjohn]

I see that you did not support ArmV8 (aarch64) ... well not a big problem I know what to do to get it to compile, just some work modding source of 1 file and mods to Makefiles  and .pro file ...

[M1ST3R]

Dear Diamond Community,

Thank you for your patience and understanding. Software development yet again proved to be a lengthy and complicated process, but we are finally releasing the new instalment of our beloved DMD Diamond wallet. As this long awaited release is now out, we set our goals and aspirations to delivering you Diamond 3.0 in the coming months. But for now, we hope you’ll enjoy this new software as much as we do.

And of course this release is also dedicated to all those who are holders of Legendary 10 Unique Cypto Assets. Their investment helped to push the sails of DMD Diamond ship to the new seas of opportunity and development. It’s the dawn of the Legends!

This release packs several exciting improvements:

- The bug that allowed for sending transactions in ‘unlocked for minting’ mode has been fixed. Now you need to enter a password each time you want to send coins.
However, as a known side effect of the fix, when unlocking the wallet in ‘unlocked for minting’ mode the lock button icon will stay "locked" at all times. If you press the unlock button the second time it would act correctly and will lock the wallet.
- Group stake trigger value increased from 100DMD to 150DMD which allows minting more old small coin piles faster.
- Scrape address functionality has been added (it allows setting up a target address for PoS rewards). A new target address (can be allocated separately to each address) can be set in GUI under the Receive Coins tab. It can be changed by double clicking on scrape address column. Please mind that if you change scrape addresses you need to restart the wallet for the changes to take effect.
- Stake Boost code implemented for Legendary 10 addresses and time limited promotion addresses which would go active on Tuesday 15 May 2016 12:00:00 UTC.
- PoW coin support share (0.01 DMD each block) has been removed and replaced with a coin support stake boosted address for similar effect.
- Automated coin selection for TX and minting, additional input is optimized for optimal utilisation of coin age.
- The code to enable same mining behaviour as [GRS] GroestlCoin was implemented but set to inactive due to community feedback and our long term fundamental developmental shift planned for DMD Diamond 3.0.
- The estimated ‘time to mint’ tool tip has been removed.
- Updated wallet version to 2.1.0.1.
- Newest OpenSSL has been used.
 
Please note that this update is mandatory with the fork date set to 15 May 2016 or more precisely everyone should update before block 1549200.
Please see Block Explorer for the current block height: https://chainz.cryptoid.info/dmd/

MINING POOLS: You need to adapt your pool software and remove coin support share after block 1549200.

LEGENDARY 10 holders: Please do not start minting before 16th May. After that date glorious days lay ahead and you can finally enjoy the boosted staking.
 
Source: https://github.com/DMDcoin/Diamond
Windows QT: https://github.com/DMDcoin/Diamond/releases/download/Diamond2101/diamond-qt-2101.zip

Long live the DMD Diamond!
Enjoy!

THANKS TEAM DiAMOND FOR ALL YOUR HARD WORK!!!!!!!!!!

Seem like the real party will start AFTER Tuesday 15 May 2016 12:00:00 UTC.

BTW, would you elaborate on the "time limited promotion addresses"

[Stein]

So does this new wallet have anything to do with having 1000 diamonds ? is that something different ?