[Minera v0.9.1] Your next mining dashboard - Antminer/CPUminer/CGminer/BFGminer

[toptek]

Will this work with avalon 741 miners? How do I set it up?

Install Minera from the image to any RPI even the rpi that comes with the miner should work, if you don't know how to install minera manually, i would use the per made image. ... with a new SD card ....save the old SD in case with the avalon software on it   ....

According to the Cg miner read me for 4.10 CG the A7/avalon 741 is on by default  .CG.. should be in minera 8 already unless you did a manual install of minera then you might have to compile Cgminer how i did below or with minera.

 like this

Code:

cd /var/www/minera
./build_miner.sh cgminer

command line to run the A7 under local miner settings for manual guided miner with minera.

Code:

--lowmem --avalon7-fan 10-100 --avalon7-freq 600 636 672 708 744 780 --avalon7-voltage-offset 0

you have to use the USB converter they give you or it won't work with any pI type ...

or compile it this way ...

if you would rather compile your own copy of Cgminer for Linux

compile it with SSH some thing like this

Code:

sudo apt-get -y install git-core build-essential autoconf automake libtool pkg-config libcurl4-openssl-dev libjansson-dev uthash-dev libncursesw5-dev libudev-dev libblkmaker-0.1-6 libevent-dev libmicrohttpd-dev libc-bin libusb-1.0

sudo git clone https://github.com/ckolivas/cgminer.git

cd /root/cgminer 

./autogen.sh

make -j 4
make install

sudo chmod 775 cgminer

sudo ldconfig 
lsusb

./cgminer --version 

Then copy it to mnera like this .

Code:

cd /root/cgminer 

sudo cp cgminer /var/www/minera/minera-bin/cgminer
cd /var/www/minera/minera-bin/
./cgminer --version 

 or if you would rather use the custom folder in minea for forked software miners.

Code:

cd /root/cgminer 
sudo cp cgminer /var/www/minera/minera-bin/custom/avalon_7
cd /var/www/minera/minera-bin/custom
./avalon_7 --version 

[1715019367]

1715019367

[1715019367]

1715019367

[1715019367]

1715019367

[1715019367]

1715019367

[1715019367]

1715019367

[zamans98]

Guys

need help, cannot figure it out why.

Raspberry Pi 3 Model B
2017-09-07-raspbian-stretch

Followed steps as per getMinera website, all the way until its fully installed.
however, i failed to connect to the URL


SSH is enabled and the default password for the 'pi' user has not been changed.
This is a security risk - please login as the 'pi' user and type 'passwd' to set a new password.

all: /var/www/minera/build_miner.sh: Permission denied
DONE! Minera is ready!

Open the URL: http://192.168.0.11/minera/

And happy mining!

[aarons6]

you need to update the manual install instructions on your webpage.. php5 is no longer a valid package to install it is now php 7.0-cli

also the mineral_install.sh isnt executable.

[ajpyoung]

So Minera is definitely dead? Nobody want to continue devolop? 

I's not dead, I'm testing the 0.8.0 version I'd like to release soon but without much changes. What do you need from it?

This is great... will Minera soon support the Antminer D3?

[Artlover]

Minera is the best mining dashboard. I use it for more years, never had problem.
Support is fast.

[michelem]

Guys

need help, cannot figure it out why.

Raspberry Pi 3 Model B
2017-09-07-raspbian-stretch

Followed steps as per getMinera website, all the way until its fully installed.
however, i failed to connect to the URL


SSH is enabled and the default password for the 'pi' user has not been changed.
This is a security risk - please login as the 'pi' user and type 'passwd' to set a new password.

all: /var/www/minera/build_miner.sh: Permission denied
DONE! Minera is ready!

Open the URL: http://192.168.0.11/minera/

And happy mining!

Why don't you flash your SD card with latest Minera image (https://getminera.com/download/latest) instead trying to manual install it?

What command do you use to manual install it? It requires "sudo".

[michelem]

you need to update the manual install instructions on your webpage.. php5 is no longer a valid package to install it is now php 7.0-cli

also the mineral_install.sh isnt executable.

what webpage?

[nycrom]

Hi, installed minera and love it!

Is it possible to integrate a telegram bot, which gives me notifications if a temperature is too high?

And can i add external temperature values somehow? I want to buy some sensors...

[michelem]

Hi, installed minera and love it!

Is it possible to integrate a telegram bot, which gives me notifications if a temperature is too high?

And can i add external temperature values somehow? I want to buy some sensors...

Telegram bot could be a good idea but it need work, may be next version.

Other sensors are not expected but project is open source you can hack it as you want.

[aarons6]

you need to update the manual install instructions on your webpage.. php5 is no longer a valid package to install it is now php 7.0-cli

also the mineral_install.sh isnt executable.

what webpage?

https://getminera.com/

[zamans98]

Guys

need help, cannot figure it out why.

Raspberry Pi 3 Model B
2017-09-07-raspbian-stretch

Followed steps as per getMinera website, all the way until its fully installed.
however, i failed to connect to the URL


SSH is enabled and the default password for the 'pi' user has not been changed.
This is a security risk - please login as the 'pi' user and type 'passwd' to set a new password.

all: /var/www/minera/build_miner.sh: Permission denied
DONE! Minera is ready!

Open the URL: http://192.168.0.11/minera/

And happy mining!

Why don't you flash your SD card with latest Minera image (https://getminera.com/download/latest) instead trying to manual install it?

What command do you use to manual install it? It requires "sudo".

yes, its done by flashing using Etcher. Using Win32DiskImager killed my other SD
yes, installation is smooth, as per Instruction on Minera webpage. Of course using SUDO, else the installation will fail

Now i stuck. Trying to login using LAN (Wifi also same issue) at the URL: http://192.168.0.11/minera/ , it failed.
IP scanning shows correct IP of the Pi.

Tried searching the net, no go.

[michelem]

Guys

need help, cannot figure it out why.

Raspberry Pi 3 Model B
2017-09-07-raspbian-stretch

Followed steps as per getMinera website, all the way until its fully installed.
however, i failed to connect to the URL


SSH is enabled and the default password for the 'pi' user has not been changed.
This is a security risk - please login as the 'pi' user and type 'passwd' to set a new password.

all: /var/www/minera/build_miner.sh: Permission denied
DONE! Minera is ready!

Open the URL: http://192.168.0.11/minera/

And happy mining!

Why don't you flash your SD card with latest Minera image (https://getminera.com/download/latest) instead trying to manual install it?

What command do you use to manual install it? It requires "sudo".

yes, its done by flashing using Etcher. Using Win32DiskImager killed my other SD
yes, installation is smooth, as per Instruction on Minera webpage. Of course using SUDO, else the installation will fail

Now i stuck. Trying to login using LAN (Wifi also same issue) at the URL: http://192.168.0.11/minera/ , it failed.
IP scanning shows correct IP of the Pi.

Tried searching the net, no go.

If you flashed the SD Card with the Minera image you DON'T need to install anything else. Just connect to the RPI IP.
f you can't connect we need more info.

[zamans98]

Guys

need help, cannot figure it out why.

Raspberry Pi 3 Model B
2017-09-07-raspbian-stretch

Followed steps as per getMinera website, all the way until its fully installed.
however, i failed to connect to the URL


SSH is enabled and the default password for the 'pi' user has not been changed.
This is a security risk - please login as the 'pi' user and type 'passwd' to set a new password.

all: /var/www/minera/build_miner.sh: Permission denied
DONE! Minera is ready!

Open the URL: http://192.168.0.11/minera/

And happy mining!

Why don't you flash your SD card with latest Minera image (https://getminera.com/download/latest) instead trying to manual install it?

What command do you use to manual install it? It requires "sudo".

yes, its done by flashing using Etcher. Using Win32DiskImager killed my other SD
yes, installation is smooth, as per Instruction on Minera webpage. Of course using SUDO, else the installation will fail

Now i stuck. Trying to login using LAN (Wifi also same issue) at the URL: http://192.168.0.11/minera/ , it failed.
IP scanning shows correct IP of the Pi.

Tried searching the net, no go.

If you flashed the SD Card with the Minera image you DON'T need to install anything else. Just connect to the RPI IP.
f you can't connect we need more info.

i tested 3 SDcards today
1.One download image direct from Minera
2. One installed 2017-09-07-raspbian-stretch, then followed the step by step guide on Minera website
3. One installed Noobs, internet working fine. No error. Youtube is smooth [to ensure that Raspberry Pi3 is good]

Both SD (1,2) gave me same error. Unable to connect

[hurricandave]

Does your Windows machine your trying to connect from use the same internal network IP 192.168.0.XXX, cause if not then you cant connect until you change the windows machine manually to the same IP range as the Minera which can then be edited to match the IP range of your home network and of course then you can revert the Windows machine back to its original IP and open the routers GUI to see if the RPi is now visible, note the new IP and try that from the Windows browser.

[michelem]

Guys

need help, cannot figure it out why.

Raspberry Pi 3 Model B
2017-09-07-raspbian-stretch

Followed steps as per getMinera website, all the way until its fully installed.
however, i failed to connect to the URL


SSH is enabled and the default password for the 'pi' user has not been changed.
This is a security risk - please login as the 'pi' user and type 'passwd' to set a new password.

all: /var/www/minera/build_miner.sh: Permission denied
DONE! Minera is ready!

Open the URL: http://192.168.0.11/minera/

And happy mining!

Why don't you flash your SD card with latest Minera image (https://getminera.com/download/latest) instead trying to manual install it?

What command do you use to manual install it? It requires "sudo".

yes, its done by flashing using Etcher. Using Win32DiskImager killed my other SD
yes, installation is smooth, as per Instruction on Minera webpage. Of course using SUDO, else the installation will fail

Now i stuck. Trying to login using LAN (Wifi also same issue) at the URL: http://192.168.0.11/minera/ , it failed.
IP scanning shows correct IP of the Pi.

Tried searching the net, no go.

If you flashed the SD Card with the Minera image you DON'T need to install anything else. Just connect to the RPI IP.
f you can't connect we need more info.

i tested 3 SDcards today
1.One download image direct from Minera
2. One installed 2017-09-07-raspbian-stretch, then followed the step by step guide on Minera website
3. One installed Noobs, internet working fine. No error. Youtube is smooth [to ensure that Raspberry Pi3 is good]

Both SD (1,2) gave me same error. Unable to connect

Is your router working with DHCP?
This isn't a problem with Minera or Raspbian itself, this is a problem with your network.

To be able to obtain an IP address your router must support (and enable) DHCP. If you haven't you need to setup a static IP address https://www.modmypi.com/blog/how-to-give-your-raspberry-pi-a-static-ip-address-update

[The_Taffinch]

NO SYSTEM IP SHOWN

Hi,

Hope someone can help. I am trying to intall Minera on a Raspberry Pi 3 and I have installed the img on an SD card. The img loads and I can login but no system IP is shown and nor does the Pi show in the list of attached devices on my router.

I have booted the pi using Raspbian (NOOBS) and this connects to WiFi fine (though I had to disable IPV6).

I have tried fiddling with dhcp settings, assigning a static IP, disabling IPV6, etc. but no luck. Any ideas?

I am pretty new to Linux so it's a little painful at the mo.

Cheers in advance for any help.

[michelem]

NO SYSTEM IP SHOWN

Hi,

Hope someone can help. I am trying to intall Minera on a Raspberry Pi 3 and I have installed the img on an SD card. The img loads and I can login but no system IP is shown and nor does the Pi show in the list of attached devices on my router.

I have booted the pi using Raspbian (NOOBS) and this connects to WiFi fine (though I had to disable IPV6).

I have tried fiddling with dhcp settings, assigning a static IP, disabling IPV6, etc. but no luck. Any ideas?

I am pretty new to Linux so it's a little painful at the mo.

Cheers in advance for any help.

Are you trying to work with Wifi or Ethernet?

[The_Taffinch]

NO SYSTEM IP SHOWN

Hi,

Hope someone can help. I am trying to intall Minera on a Raspberry Pi 3 and I have installed the img on an SD card. The img loads and I can login but no system IP is shown and nor does the Pi show in the list of attached devices on my router.

I have booted the pi using Raspbian (NOOBS) and this connects to WiFi fine (though I had to disable IPV6).

I have tried fiddling with dhcp settings, assigning a static IP, disabling IPV6, etc. but no luck. Any ideas?

I am pretty new to Linux so it's a little painful at the mo.

Cheers in advance for any help.

Are you trying to work with Wifi or Ethernet?

WiFi:-)

[michelem]

NO SYSTEM IP SHOWN

Hi,

Hope someone can help. I am trying to intall Minera on a Raspberry Pi 3 and I have installed the img on an SD card. The img loads and I can login but no system IP is shown and nor does the Pi show in the list of attached devices on my router.

I have booted the pi using Raspbian (NOOBS) and this connects to WiFi fine (though I had to disable IPV6).

I have tried fiddling with dhcp settings, assigning a static IP, disabling IPV6, etc. but no luck. Any ideas?

I am pretty new to Linux so it's a little painful at the mo.

Cheers in advance for any help.

Are you trying to work with Wifi or Ethernet?

WiFi:-)

Please check this https://github.com/getminera/minera/wiki/Configure-Wifi
And this: https://www.raspberrypi.org/documentation/configuration/wireless/wireless-cli.md

[The_Taffinch]

NO SYSTEM IP SHOWN

Hi,

Hope someone can help. I am trying to intall Minera on a Raspberry Pi 3 and I have installed the img on an SD card. The img loads and I can login but no system IP is shown and nor does the Pi show in the list of attached devices on my router.

I have booted the pi using Raspbian (NOOBS) and this connects to WiFi fine (though I had to disable IPV6).

I have tried fiddling with dhcp settings, assigning a static IP, disabling IPV6, etc. but no luck. Any ideas?

I am pretty new to Linux so it's a little painful at the mo.

Cheers in advance for any help.

Are you trying to work with Wifi or Ethernet?

WiFi:-)

Please check this https://github.com/getminera/minera/wiki/Configure-Wifi
And this: https://www.raspberrypi.org/documentation/configuration/wireless/wireless-cli.md

Great...many thanks. I've think I've done some of this (gleaned from other sources), but I will double-check this evening. It's possible I've missed some steps out.