[DIG] DIGIT [X13] |Available For Takeover! |

[Hoshimaru]

Any idea if minep.it will have a pool ready for Digit X13?
If not, what pools are joining in?

[stokecrypto]

good old solo mine. brings back memories

[marada]

Do we have to wait with sources checking until the coin is launched??

[kahir]

looks like Dev want to solomine for while then give us wallets and nodes

[ChekaZ]

Which miner to use for X13? Same as for X11?

[Hoshimaru]

good old solo mine. brings back memories

That suits me well
I've been looking forward to a launch were I could at least solo mine for 15 - 30 minutes before diff skyrockets because of pools coming online.
Lately, I didn't even bother to try solo.

[flubber]

looks like Dev want to solomine for while then give us wallets and nodes

Yeah dev, why wallet release SHORTLY after launch, the launch should be the wallet !! ??

[qwizzie]

Any idea if minep.it will have a pool ready for Digit X13?
If not, what pools are joining in?

at least two pools have offically declared on this forum to support Digit, those pools will need to setup the pool for Digit
first .. which they can only do after launch time. When they are ready they will announce it here ..  

[qwizzie]

Which miner to use for X13? Same as for X11?

see post 14

[qwizzie]

good old solo mine. brings back memories

That suits me well
I've been looking forward to a launch were I could at least solo mine for 15 - 30 minutes before diff skyrockets because of pools coming online.
Lately, I didn't even bother to try solo.

i even did solo mining without windows wallet once (with some difficulty) .. those good old maxcoin times
good thing we have a windows wallet right after start..

[Kergekoin]

Lol, guys read the DSF posts. They distanced themselves from pools because they want to be fair for everyone and give same conditions for everyone.

Use the X13 sph sgminer here:

https://bitcointalk.org/index.php?topic=623409.0;topicseen

Im sure it works. I used it on marucoin and worked fine.  

[AceCobra1]

solo mine is easy just add the following to digit.conf

rpcuser=gpu1
rpcpassword=password
rpcallowip=127.0.0.1
rpcport=44101
daemon=1
server=1
listen=1

then in your .bat or .conf file for your miner use http://127.0.0.1:44101 as your server address (address usually for the pool) and you can mine

rpcport=44101 ? not rpcport 11101 as from post 1 ?

How do I find out which port I should use ?

[Amph]

solo mine is easy just add the following to digit.conf

rpcuser=gpu1
rpcpassword=password
rpcallowip=127.0.0.1
rpcport=44101
daemon=1
server=1
listen=1

then in your .bat or .conf file for your miner use http://127.0.0.1:44101 as your server address (address usually for the pool) and you can mine

rpcport=44101 ? not rpcport 11101 as from post 1 ?

How do I find out which port I should use ?

just put something like 3666 and match it with the bat(conf/shortcut of your miner

[Kergekoin]

solo mine is easy just add the following to digit.conf

rpcuser=gpu1
rpcpassword=password
rpcallowip=127.0.0.1
rpcport=44101
daemon=1
server=1
listen=1

then in your .bat or .conf file for your miner use http://127.0.0.1:44101 as your server address (address usually for the pool) and you can mine

rpcport=44101 ? not rpcport 11101 as from post 1 ?

How do I find out which port I should use ?

You can use any port what you like. It does not matter. This port needs to be free ofc.
Default ports are in OP. If you want you can use default ports too. No problem.

The password, username and rpcport has to match your miner password, username and rpcport. Thats the only thing to check.

[pieran]

is it possible to solo mine with multiple rigs by setting up the wallet on one rig and connecting all miners to it? Or do I need to setup some kind of proxy?

[Hoshimaru]

solo mine is easy just add the following to digit.conf

rpcuser=gpu1
rpcpassword=password
rpcallowip=127.0.0.1
rpcport=44101
daemon=1
server=1
listen=1

then in your .bat or .conf file for your miner use http://127.0.0.1:44101 as your server address (address usually for the pool) and you can mine

rpcport=44101 ? not rpcport 11101 as from post 1 ?

How do I find out which port I should use ?
It doesn't matter. I you like, you can even use 666 or 9999, as long as no other process or service uses them.
I solo mine all the time on 1981. Same config for all wallets and no need to alter bat files or cgwatcher profile

[AceCobra1]

solo mine is easy just add the following to digit.conf

rpcuser=gpu1
rpcpassword=password
rpcallowip=127.0.0.1
rpcport=44101
daemon=1
server=1
listen=1

then in your .bat or .conf file for your miner use http://127.0.0.1:44101 as your server address (address usually for the pool) and you can mine

rpcport=44101 ? not rpcport 11101 as from post 1 ?

How do I find out which port I should use ?

You can use any port what you like. It does not matter. This port needs to be free ofc.
Default ports are in OP. If you want you can use default ports too. No problem.

The password, username and rpcport has to match your miner password, username and rpcport. Thats the only thing to check.

So does the port in the bat file in CGminer need to match the port in the conf file ?

[stokecrypto]

the port is what ever you want it to be,

so if you want your wallet server on port 1000, you would use port 1000 in your miners .bat.

if you did yourip:1000, you could connect from a remote computer and mine into your local wallet

[AceCobra1]

the port is what ever you want it to be,

so if you want your wallet server on port 1000, you would use port 1000 in your miners .bat.

if you did yourip:1000, you could connect from a remote computer and mine into your local wallet

thanks

[AceCobra1]

the port is what ever you want it to be,

so if you want your wallet server on port 1000, you would use port 1000 in your miners .bat.

if you did yourip:1000, you could connect from a remote computer and mine into your local wallet

So if I had 3 rigs and want to mine it into the 1 wallet, do I just basically match all my ports together and it will mine into the 1 wallet ?