[ANN][X11/X13] X11 (Darkcoin)/X13 (Marucoin) miner (based on sph-sgminer)

[Remember remember the 5th of November]

First time using git to commit, but I've created some small pull requests.

[Mister1k]

Chello all. Great thread,great people,good times.
I just want to thank lasybear and Co for their incredible work.
I am using x11 mod b2. I havent tried x13 at all.
I Just started using Sgminer two days ago.
Two machines. Not rigs.
Sapphire reference Hd7950s (Stilt bios)win7 64 i5
Sapphire DualX Hd 7950 (Stilt bios) win7 32 Athlon X2(more memory on the card lol)
Username  Stilt lite coin forum. He tweaked the memory timings. Amazing work.
If you can find your bios for your cards in that thread,you'll gain huge.
When mining I use Stilts bios. 1500 memory all cards.
Hd7950s
Intensity 15
Thread concurrency 24000 always.
Look up gap 2
Threads 2
Shaders 1792
Work 256( i tried 128 and lost 150 kh)
I never use set max gpu or sync, ever!!
Bat files are for after its tweaked .
Use the comman prompt and run it manual till its tweaked.
Sapphire reference card drivers 14.3 beta 64
Sapphire Dualx card drivers 13.12 32
I find x11 voltage sensitive. I recommend settings voltage to stock,
The one reference I have is 1.112 undervolted stock. It needed a boost  to 1.118.
I would get one or two HW in three four hours. Gone now.
The other stock voltage 1.1250 all day long zero HW.
I always set voltage and clocks With Trixx , then close Trixx or Msi.
If they run in the background you will lose Kh. Then I start Sgminer.
I run them all 15 intensity. No sense mashing the gas till its tweaked.
I will say I find it strange that the peeps with higher end cards 280/280x
290/290x 7970s etc are down compared to my 7950s. Even some that are
Running good numbers, I feel good get more.
The Stilt bios could be a huge factor in my opinion. Anyway
I better get on with it. My first post an all. Lol. Heres the numbers.
Sapphire references 1150 clock 1500 memory
2.895 Mh/s +- 5 kh
Sapphire DualX  1100 clock 1500 memory 1.187 volts.
2.770 Mh/s +- 5 kh
Hooooooo $@&#%* Rawww baby
Absolutely awesome work peeps.
Runs cool.
99.5 plus valid at the pool.
In closing , I think I can get more.
I wanna try this xintensity thing. Pg 20
Cheers folks. The x11mod is killer.
Thankx again to all involved.
I hope this helps some peeps.

stilt bios?
With reference bios my 7950's runs at 2940kh/s @ 1100/1500 x11modb2 .
-I 18

Thankx for the tip. Ill flip to stock and see what happens.
I'm only 40 kh behind you at I 15.

[bullus]

-I 15 than that it's great..why don't us push it to -I 18? No need to flash the bios.
I can push the -I to 20 but it has no influence..only more rejects.

[Mister1k]

-I 15 than that it's great..why don't us push it to -I 18? No need to flash the bios.

i got the switch . So do you. Position 1 stock bios. Position 2 Stilt bios .
Just. A reboot away. I'm gonna take your advice and try 16 ,17 etc. both positions.

[bullus]

-I 15 than that it's great..why don't us push it to -I 18? No need to flash the bios.

i got the switch . So do you. Position 1 stock bios. Position 2 Stilt bios .
Just. A reboot away. I'm gonna take your advice and try 16 ,17 etc. both positions.

ah ok , didn't know that was called the stilt bios, will test it..thanks.

[Mister1k]

-I 15 than that it's great..why don't us push it to -I 18? No need to flash the bios.

i got the switch . So do you. Position 1 stock bios. Position 2 Stilt bios .
Just. A reboot away. I'm gonna take your advice and try 16 ,17 etc. both positions.

ah ok , didn't know that was called the stilt bios, will test it..thanks.

Sorry for the misunderstanding my bad.
I flashed bios months ago.
I got from the lite coin forum.
Stilt a user on the lite coin forum built bios for all kinds of cards depending on memory chips.etc
He tweaked the memory timings. Etc. specific for 1500 memory
I use his bios for mining. They work.
Script mining I gained 300 kh instantly.
I suspect by the end of the day i'm gonna find that sweet spot.
Sorry for the misunderstanding.
I just name it that.

[BitSmacker]

I'll say it once and only once, from personal experience.

Thread concurrency for Hawaii chipsets (290/290X) should be 14080 not 8192.

You'll be surprised, but thread-concurrency (and lookup gap too) is affected only for scrypt kernels )

ocl.c

Code:

        sprintf(CompilerOptions, "-I \"%s\" -I \"%s\" -I \"%skernel\" -I \".\" -D LOOKUP_GAP=%d -D CONCURRENT_THREADS=%d -D WORKSIZE=%d",
                        opt_kernel_path, sgminer_path, sgminer_path,
                        cgpu->lookup_gap, (unsigned int)cgpu->thread_concurrency, (int)clState->wsize);

Neither x11, nor x13 are not using external definition of CONCURRENT_THREADS.

So tc of 1 vs 999999999 will show no difference with x11?  What about shaders?  Thanks!

only intensity/xintensity/rawintensity does matter.
Threads =
1 << intensity
or
xintensity * shaders
or
rawintensity

Unless I'm mistaking what lasybear is saying here, for x11 it doesn't matter if:

"thread-concurrency" : "8192",
"thread-concurrency" : "99999999",
or you just delete the entire line

It makes no difference for x11

[han1122]

Wish DEV make a JPC kernel 

[oktay50000]

i noticed something


any explanation?
guy u check [pool graphs and report here please
no issue with miner
but on graph...it seems miner changed pool for hours dont know..any idea

[Remember remember the 5th of November]

Perhaps the pool was down at that time or you have added a backup pool? This sgminer has NO hidden pools.

[jenveno]

Thanks so much for this update, improved hashrates on my end but it's taken some trial and error to get things right and I'm still trying to get it working even...

Currently working on getting the x11 side configured and here is what I got....

I have an IceQx HD6950 1GB stable at 1.72 mhs with this config:

{
"pools" : [
   {
      *POOLS*
   }
   
],
"intensity" : "17",
"xintensity" : "0",
"rawintensity" : "0",
"kernel" : "x11mod",
"lookup-gap" : "2",
"thread-concurrency" : "8128",
"shaders" : "0",
"gpu-engine" : "903",
"gpu-fan" : "0-85",
"gpu-memclock" : "1380",
"gpu-powertune" : "10",
"gpu-vddc" : "0.000",
"temp-cutoff" : "87",
"temp-overheat" : "82",
"temp-target" : "74",
"api-listen" : false,
"api-mcast-port" : "4028",
"api-port" : "4028",
"auto-fan" : true,
"auto-gpu" : false,
"expiry" : "120",
"failover-only" : true,
"gpu-threads" : "4",
"log" : "5",
"queue" : "1",
"scan-time" : "60",
"temp-hysteresis" : "3",
"failover-switch-delay" : "60",
"no-pool-disable" : true,
"kernel-path" : "/usr/local/bin"
}


And 4 Gigabyte R9-270 I have yet to get a stable setting for, anything I've tried so far locks up my machine.

[t00tie]

New release. No speed updates in this release. Github sources as always here: https://github.com/lasybear/sph-sgminer_x11mod
Changes:

• Total uptime in first string
• Gpu sets idle, if all pools dead. Tried to unplug internet cable and gpu set to idle state, clocks dropped. Share your results about this feature.
• show-coindiff option from cgminer-3.7.2-kalroth added. Description: Option to show coin/network difficulty instead of hash value. --show-coindiff or "show-coindiff" : true, can now be used to show the coin/network difficulty in accepted or rejected messages. This is only relevant for coin switching pools and it is off by default.

Link for windows binaries: https://www.dropbox.com/s/vtj5z5e56jc8wh7/sgminer_x11x13mod_30_05_2014.zip

Thx platinum4 for his ideas, and lasybear for his free miner.

Awesome work everyone! This hashes grrrrreat on my 290 AND on my 5970 in the same rig.
The crappy reference 290 with elpida memory gets 3.600 Mh +- 0.020
The 5970 (my favourite card) gets 2*1.798, pretty much exactly the same as the 290. Goes to show you can still be useful even if you've been replaced by several generations!

If I were to wish for any more features it would be pool naming as in Kalroth's cgminer. With it you can (in the pool section of the config file) use

Code:

		"name" : "coinking X11",

and instead of referring to it as "Pool 0" the miner uses the name. Purely cosmetic but handy.

Three cheers for all you brilliant devs! Thank you!

[bullus]

Poolnames just work for me from the beginning. Just use "poolname"

"Poolname" : "miningrentalrigs x13",

Code:

sgminer 4.1.0 - Started: [2014-05-30 14:20:27]
--------------------------------------------------------------------------------
(5s):9.282M (avg):9.188Mh/s | A:10  R:0  HW:0  WU:0.130/m
ST: 1  SS: 0  NB: 190  LW: 11291  GF: 0  RF: 0
Connected to miningrentalrigs x13 (stratum) diff 0.062 as user xxxxx
Block: 320c8e16...  Diff:916  Started: [15:53:53]  Best share: 18
--------------------------------------------------------------------------------
[P]ool management [G]PU management [S]ettings [D]isplay options [Q]uit
 GPU  0:  60.0C 2707RPM | 2.296M/2.300Mh/s | R:  1.8% HW:0 WU:0.032/m I:19
 GPU  1:  45.0C  65%    | OFF   / 0.000h/s | R:  0.0% HW:0 WU:0.000/m I:19
 GPU  2:  62.0C 3218RPM | 2.293M/2.295Mh/s | R:  1.8% HW:0 WU:0.035/m I:19
 GPU  3:  56.0C 3197RPM | 2.279M/2.296Mh/s | R:  1.9% HW:0 WU:0.033/m I:19
 GPU  4:  56.0C 2792RPM | 2.300M/2.299Mh/s | R:  2.0% HW:0 WU:0.031/m I:19
--------------------------------------------------------------------------------
[15:50:14] Accepted 0f0b8ae3 Diff 0.066/0.062 GPU 2 at miningrentalrigs x13
[15:50:17] Accepted 0b5f2840 Diff 0.088/0.062 GPU 0 at miningrentalrigs x13
[15:50:34] Accepted 0205e531 Diff 0.494/0.062 GPU 2 at miningrentalrigs x13

[count_cyrpto]

And 4 Gigabyte R9-270 I have yet to get a stable setting for, anything I've tried so far locks up my machine.

I also have 3 r9 270's, and have yet to find the right settings. Usually freezes after 45 minutes to an hour.

Tried setting intensity down to 16, and xintensity down to 51 to 56... Still nothing..

[Wolf_Pack]

And 4 Gigabyte R9-270 I have yet to get a stable setting for, anything I've tried so far locks up my machine.

I also have 3 r9 270's, and have yet to find the right settings. Usually freezes after 45 minutes to an hour.

Tried setting intensity down to 16, and xintensity down to 51 to 56... Still nothing..

I have a PowerColor 280x and a Gigabyte 270 that I have had running stable for the past 10 hours (fingers crossed).  The second card is my 270.

Code:

"auto-fan" : true,
"temp-cutoff" : "85,85",
"temp-target" : "73,75",
"gpu-fan" : "55-100,75-100",
"xintensity" : "512,512",
"vectors" : "1,1",
"worksize" : "256,128",
"lookup-gap" : "2",
"thread-concurrency" : "8192,5121",
"shaders" : "1792,1280",
"api-listen" : true,
"api-port" : "4028",
"api-allow" : "W:127.0.0.1",
"expiry" : "120",
"gpu-dyninterval" : "7",
"gpu-threads" : "2,2",
"gpu-platform" : "0",
"gpu-engine" : "1070,1200",
"gpu-memclock" : "1500,1500",
"gpu-powertune" : "20,20",
"log" : "5",
"no-pool-disable" : true,
"queue" : "1",
"scan-time" : "60",
"shares" : "0",
"kernel-path" : "/usr/local/bin",
"kernel" : "x11mod"
}

Code:

sgminer 4.1.0 - Started: [2014-05-30 00:04:18]
--------------------------------------------------------------------------------
(5s):5.340M (avg):5.320Mh/s | A:23  R:0  HW:0  WU:0.075/m
ST: 6  SS: 0  NB: 1931  LW: 1769  GF: 62  RF: 0
Connected to Pool 0 (longpoll) diff 62 as user Wolf_Pack
Block: 8b0ae4c6...  Diff:745  Started: [10:04:54]  Best share: 157
--------------------------------------------------------------------------------
[P]ool management [G]PU management [S]ettings [D]isplay options [Q]uit
 GPU 0:  54.0C 2102RPM | 3.142M/3.120Mh/s | R:  0.0% HW:0 WU:0.044/m xI:512
 GPU 1:  60.0C 2398RPM | 2.213M/2.200Mh/s | R:  0.0% HW:0 WU:0.031/m xI:512
--------------------------------------------------------------------------------
[10:03:27] Stratum from Pool 2 detected new block
[10:03:27] Network diff set to 62
[10:03:27] New block detected on network before pool notification
[10:04:26] Network diff set to 758
[10:04:26] Stratum from Pool 2 detected new block
[10:04:37] Network diff set to 627
[10:04:37] Stratum from Pool 2 detected new block
[10:04:42] Network diff set to 669
[10:04:42] Stratum from Pool 2 detected new block

[count_cyrpto]

And 4 Gigabyte R9-270 I have yet to get a stable setting for, anything I've tried so far locks up my machine.

I also have 3 r9 270's, and have yet to find the right settings. Usually freezes after 45 minutes to an hour.

Tried setting intensity down to 16, and xintensity down to 51 to 56... Still nothing..

I have a PowerColor 280x and a Gigabyte 270 that I have had running stable for the past 10 hours (fingers crossed).  The second card is my 270.

Code:

"auto-fan" : true,
"temp-cutoff" : "85,85",
"temp-target" : "73,75",
"gpu-fan" : "55-100,75-100",
"xintensity" : "512,512",
"vectors" : "1,1",
"worksize" : "256,128",
"lookup-gap" : "2",
"thread-concurrency" : "8192,5121",
"shaders" : "1792,1280",
"api-listen" : true,
"api-port" : "4028",
"api-allow" : "W:127.0.0.1",
"expiry" : "120",
"gpu-dyninterval" : "7",
"gpu-threads" : "2,2",
"gpu-platform" : "0",
"gpu-engine" : "1070,1200",
"gpu-memclock" : "1500,1500",
"gpu-powertune" : "20,20",
"log" : "5",
"no-pool-disable" : true,
"queue" : "1",
"scan-time" : "60",
"shares" : "0",
"kernel-path" : "/usr/local/bin",
"kernel" : "x11mod"
}

Code:

sgminer 4.1.0 - Started: [2014-05-30 00:04:18]
--------------------------------------------------------------------------------
(5s):5.340M (avg):5.320Mh/s | A:23  R:0  HW:0  WU:0.075/m
ST: 6  SS: 0  NB: 1931  LW: 1769  GF: 62  RF: 0
Connected to Pool 0 (longpoll) diff 62 as user Wolf_Pack
Block: 8b0ae4c6...  Diff:745  Started: [10:04:54]  Best share: 157
--------------------------------------------------------------------------------
[P]ool management [G]PU management [S]ettings [D]isplay options [Q]uit
 GPU 0:  54.0C 2102RPM | 3.142M/3.120Mh/s | R:  0.0% HW:0 WU:0.044/m xI:512
 GPU 1:  60.0C 2398RPM | 2.213M/2.200Mh/s | R:  0.0% HW:0 WU:0.031/m xI:512
--------------------------------------------------------------------------------
[10:03:27] Stratum from Pool 2 detected new block
[10:03:27] Network diff set to 62
[10:03:27] New block detected on network before pool notification
[10:04:26] Network diff set to 758
[10:04:26] Stratum from Pool 2 detected new block
[10:04:37] Network diff set to 627
[10:04:37] Stratum from Pool 2 detected new block
[10:04:42] Network diff set to 669
[10:04:42] Stratum from Pool 2 detected new block

What catalyst drivers are you using? OS?

I'm using 13.11 on windows 7...

[qwep]

anyone has settings for 6750

[Wolf_Pack]

And 4 Gigabyte R9-270 I have yet to get a stable setting for, anything I've tried so far locks up my machine.

I also have 3 r9 270's, and have yet to find the right settings. Usually freezes after 45 minutes to an hour.

Tried setting intensity down to 16, and xintensity down to 51 to 56... Still nothing..

I have a PowerColor 280x and a Gigabyte 270 that I have had running stable for the past 10 hours (fingers crossed).  The second card is my 270.

Code:

"auto-fan" : true,
"temp-cutoff" : "85,85",
"temp-target" : "73,75",
"gpu-fan" : "55-100,75-100",
"xintensity" : "512,512",
"vectors" : "1,1",
"worksize" : "256,128",
"lookup-gap" : "2",
"thread-concurrency" : "8192,5121",
"shaders" : "1792,1280",
"api-listen" : true,
"api-port" : "4028",
"api-allow" : "W:127.0.0.1",
"expiry" : "120",
"gpu-dyninterval" : "7",
"gpu-threads" : "2,2",
"gpu-platform" : "0",
"gpu-engine" : "1070,1200",
"gpu-memclock" : "1500,1500",
"gpu-powertune" : "20,20",
"log" : "5",
"no-pool-disable" : true,
"queue" : "1",
"scan-time" : "60",
"shares" : "0",
"kernel-path" : "/usr/local/bin",
"kernel" : "x11mod"
}

Code:

sgminer 4.1.0 - Started: [2014-05-30 00:04:18]
--------------------------------------------------------------------------------
(5s):5.340M (avg):5.320Mh/s | A:23  R:0  HW:0  WU:0.075/m
ST: 6  SS: 0  NB: 1931  LW: 1769  GF: 62  RF: 0
Connected to Pool 0 (longpoll) diff 62 as user Wolf_Pack
Block: 8b0ae4c6...  Diff:745  Started: [10:04:54]  Best share: 157
--------------------------------------------------------------------------------
[P]ool management [G]PU management [S]ettings [D]isplay options [Q]uit
 GPU 0:  54.0C 2102RPM | 3.142M/3.120Mh/s | R:  0.0% HW:0 WU:0.044/m xI:512
 GPU 1:  60.0C 2398RPM | 2.213M/2.200Mh/s | R:  0.0% HW:0 WU:0.031/m xI:512
--------------------------------------------------------------------------------
[10:03:27] Stratum from Pool 2 detected new block
[10:03:27] Network diff set to 62
[10:03:27] New block detected on network before pool notification
[10:04:26] Network diff set to 758
[10:04:26] Stratum from Pool 2 detected new block
[10:04:37] Network diff set to 627
[10:04:37] Stratum from Pool 2 detected new block
[10:04:42] Network diff set to 669
[10:04:42] Stratum from Pool 2 detected new block

What catalyst drivers are you using? OS?

I'm using 13.11 on windows 7...

I'm using the same.

• Windows 7
• 13.12
• https://www.dropbox.com/s/59lvecndm866bzz/sph-sgminer_x11mod_b2.zip

I want to try the updated miner, but since it took so long to get this mining without locking up my rig, I decided to let it run as long as I can.

[ozzy1926]

And 4 Gigabyte R9-270 I have yet to get a stable setting for, anything I've tried so far locks up my machine.

I also have 3 r9 270's, and have yet to find the right settings. Usually freezes after 45 minutes to an hour.

Tried setting intensity down to 16, and xintensity down to 51 to 56... Still nothing..

I have a PowerColor 280x and a Gigabyte 270 that I have had running stable for the past 10 hours (fingers crossed).  The second card is my 270.

Code:

"auto-fan" : true,
"temp-cutoff" : "85,85",
"temp-target" : "73,75",
"gpu-fan" : "55-100,75-100",
"xintensity" : "512,512",
"vectors" : "1,1",
"worksize" : "256,128",
"lookup-gap" : "2",
"thread-concurrency" : "8192,5121",
"shaders" : "1792,1280",
"api-listen" : true,
"api-port" : "4028",
"api-allow" : "W:127.0.0.1",
"expiry" : "120",
"gpu-dyninterval" : "7",
"gpu-threads" : "2,2",
"gpu-platform" : "0",
"gpu-engine" : "1070,1200",
"gpu-memclock" : "1500,1500",
"gpu-powertune" : "20,20",
"log" : "5",
"no-pool-disable" : true,
"queue" : "1",
"scan-time" : "60",
"shares" : "0",
"kernel-path" : "/usr/local/bin",
"kernel" : "x11mod"
}

Code:

sgminer 4.1.0 - Started: [2014-05-30 00:04:18]
--------------------------------------------------------------------------------
(5s):5.340M (avg):5.320Mh/s | A:23  R:0  HW:0  WU:0.075/m
ST: 6  SS: 0  NB: 1931  LW: 1769  GF: 62  RF: 0
Connected to Pool 0 (longpoll) diff 62 as user Wolf_Pack
Block: 8b0ae4c6...  Diff:745  Started: [10:04:54]  Best share: 157
--------------------------------------------------------------------------------
[P]ool management [G]PU management [S]ettings [D]isplay options [Q]uit
 GPU 0:  54.0C 2102RPM | 3.142M/3.120Mh/s | R:  0.0% HW:0 WU:0.044/m xI:512
 GPU 1:  60.0C 2398RPM | 2.213M/2.200Mh/s | R:  0.0% HW:0 WU:0.031/m xI:512
--------------------------------------------------------------------------------
[10:03:27] Stratum from Pool 2 detected new block
[10:03:27] Network diff set to 62
[10:03:27] New block detected on network before pool notification
[10:04:26] Network diff set to 758
[10:04:26] Stratum from Pool 2 detected new block
[10:04:37] Network diff set to 627
[10:04:37] Stratum from Pool 2 detected new block
[10:04:42] Network diff set to 669
[10:04:42] Stratum from Pool 2 detected new block

What catalyst drivers are you using? OS?

I'm using 13.11 on windows 7...

I'm using the same.

• Windows 7
• 13.12
• https://www.dropbox.com/s/59lvecndm866bzz/sph-sgminer_x11mod_b2.zip

I want to try the updated miner, but since it took so long to get this mining without locking up my rig, I decided to let it run as long as I can.

is this darkcoin screen?

[Wolf_Pack]

And 4 Gigabyte R9-270 I have yet to get a stable setting for, anything I've tried so far locks up my machine.

I also have 3 r9 270's, and have yet to find the right settings. Usually freezes after 45 minutes to an hour.

Tried setting intensity down to 16, and xintensity down to 51 to 56... Still nothing..

I have a PowerColor 280x and a Gigabyte 270 that I have had running stable for the past 10 hours (fingers crossed).  The second card is my 270.

Code:

"auto-fan" : true,
"temp-cutoff" : "85,85",
"temp-target" : "73,75",
"gpu-fan" : "55-100,75-100",
"xintensity" : "512,512",
"vectors" : "1,1",
"worksize" : "256,128",
"lookup-gap" : "2",
"thread-concurrency" : "8192,5121",
"shaders" : "1792,1280",
"api-listen" : true,
"api-port" : "4028",
"api-allow" : "W:127.0.0.1",
"expiry" : "120",
"gpu-dyninterval" : "7",
"gpu-threads" : "2,2",
"gpu-platform" : "0",
"gpu-engine" : "1070,1200",
"gpu-memclock" : "1500,1500",
"gpu-powertune" : "20,20",
"log" : "5",
"no-pool-disable" : true,
"queue" : "1",
"scan-time" : "60",
"shares" : "0",
"kernel-path" : "/usr/local/bin",
"kernel" : "x11mod"
}

Code:

sgminer 4.1.0 - Started: [2014-05-30 00:04:18]
--------------------------------------------------------------------------------
(5s):5.340M (avg):5.320Mh/s | A:23  R:0  HW:0  WU:0.075/m
ST: 6  SS: 0  NB: 1931  LW: 1769  GF: 62  RF: 0
Connected to Pool 0 (longpoll) diff 62 as user Wolf_Pack
Block: 8b0ae4c6...  Diff:745  Started: [10:04:54]  Best share: 157
--------------------------------------------------------------------------------
[P]ool management [G]PU management [S]ettings [D]isplay options [Q]uit
 GPU 0:  54.0C 2102RPM | 3.142M/3.120Mh/s | R:  0.0% HW:0 WU:0.044/m xI:512
 GPU 1:  60.0C 2398RPM | 2.213M/2.200Mh/s | R:  0.0% HW:0 WU:0.031/m xI:512
--------------------------------------------------------------------------------
[10:03:27] Stratum from Pool 2 detected new block
[10:03:27] Network diff set to 62
[10:03:27] New block detected on network before pool notification
[10:04:26] Network diff set to 758
[10:04:26] Stratum from Pool 2 detected new block
[10:04:37] Network diff set to 627
[10:04:37] Stratum from Pool 2 detected new block
[10:04:42] Network diff set to 669
[10:04:42] Stratum from Pool 2 detected new block

What catalyst drivers are you using? OS?

I'm using 13.11 on windows 7...

I'm using the same.

• Windows 7
• 13.12
• https://www.dropbox.com/s/59lvecndm866bzz/sph-sgminer_x11mod_b2.zip

I want to try the updated miner, but since it took so long to get this mining without locking up my rig, I decided to let it run as long as I can.

is this darkcoin screen?

I'm mining Nanolite.