sling00
Newbie
Offline
Activity: 11
Merit: 0
|
|
June 04, 2014, 01:03:19 PM Last edit: June 04, 2014, 01:22:49 PM by sling00 |
|
Please fix 290/290x sick bug in x11mod kernel. Works fine on x13mod but x11mod sicks in 1-30 minutes randomly. Works fine on vanilla darkcoin kernel in sph-sgminer but binary miner & this miner sick the cards. Would be nice if it could be fixed in x11mod and sgminer 5.0 Note: i've tried different card bioses, different operating systems, and different clocks (even insanely low ones), they all sick randomly while the card is stable on every other algorithm/miner ive tried it on. as well as different catalyst versions.
|
|
|
|
virtualista
Newbie
Offline
Activity: 22
Merit: 0
|
|
June 04, 2014, 01:08:20 PM |
|
Please fix 290/290x sick bug in x11mod kernel. Works fine on x13mod but x11mod sicks in 1-30 minutes randomly. Works fine on vanilla darkcoin kernel in sph-sgminer but binary miner & this miner sick the cards. Would be nice if it could be fixed in x11mod and sgminer 5.0 set your intensity to less with 1 and will be fine i did and it works.
|
|
|
|
sling00
Newbie
Offline
Activity: 11
Merit: 0
|
|
June 04, 2014, 01:23:38 PM |
|
Please fix 290/290x sick bug in x11mod kernel. Works fine on x13mod but x11mod sicks in 1-30 minutes randomly. Works fine on vanilla darkcoin kernel in sph-sgminer but binary miner & this miner sick the cards. Would be nice if it could be fixed in x11mod and sgminer 5.0 set your intensity to less with 1 and will be fine i did and it works. intensity 8 will cause the same thing as 17 (which is optimal )
|
|
|
|
ozzy1926
|
|
June 04, 2014, 01:28:36 PM |
|
will there be new % increase? girino version gives 100kh/s more
100kh/s more on what? x11 and x13? both? will there be new % increase? girino version gives 100kh/s more
and 1% fee. the math is still in his favor 100kh/s more is like 1/30 for 1/100 fee its x13 and i get 100kh/s more from each card i get 3.2mh/s with lasybear and 3.3mh/s with grino may cards are 290s. so with grino i get 3x 3300:9900kh/s- %1fee:9.8mh/s with lasybear:3x3200kh/s:9.6mh/s
|
|
|
|
lasybear (OP)
Member
Offline
Activity: 113
Merit: 14
|
|
June 04, 2014, 01:40:37 PM |
|
will there be new % increase? girino version gives 100kh/s more
100kh/s more on what? x11 and x13? both? will there be new % increase? girino version gives 100kh/s more
and 1% fee. the math is still in his favor 100kh/s more is like 1/30 for 1/100 fee You're so funny ) This is not a miner quality, but kernels code optimisations. Ok. Look. Girino's sgminer - Started: [2014-06-04 16:02:10] - [0 days 00:01:34] -------------------------------------------------------------------------------- (5s):2.876M (avg):2.854Mh/s | A:17 R:1 HW:0 WU:0.052/m ST: 0 SS: 0 NB: 9 LW: 165 GF: 0 RF: 0 Connected to Trademybit (stratum) diff 0.005 as user someone.5 Block: 1ecd4b32... Diff:34 Started: [16:03:42] Best share: 0.313 -------------------------------------------------------------------------------- [P]ool management [G]PU management [S]ettings [D]isplay options [Q]uit GPU 0: 64.0C 1049RPM | 2.866M/2.902Mh/s | A:18 R: 5.3% HW:0 WU:0.052/m rI:81920 -------------------------------------------------------------------------------- [16:02:28] Accepted 71450cce Diff 0.009/0.005 GPU 0 at Trademybit [16:02:34] Accepted 1ef085e5 Diff 0.032/0.005 GPU 0 at Trademybit [16:02:40] Accepted 71108ca2 Diff 0.009/0.005 GPU 0 at Trademybit [16:02:42] Network diff set to 660 [16:02:42] Stratum from Trademybit detected new block [16:02:51] Accepted 333e23f5 Diff 0.020/0.005 GPU 0 at Trademybit
x13mod with some my optimizations only in OpenCL code, not miner codesgminer - Started: [2014-06-04 15:58:48] - [0 days 00:01:46] -------------------------------------------------------------------------------- (5s):2.874M (avg):2.865Mh/s | A:15 R:0 HW:0 WU:0.053/m ST: 1 SS: 0 NB: 2 LW: 167 GF: 0 RF: 0 Connected to Trademybit (stratum) diff 0.020 as user someone.5 Block: 51133e8a... Diff:232 Started: [15:59:04] Best share: 0.688 -------------------------------------------------------------------------------- [P]ool management [G]PU management [S]ettings [D]isplay options [Q]uit GPU 0: 68.0C 1139RPM | 2.881M/2.953Mh/s | A:16 R: 0.0% HW:0 WU:0.053/m rI:81920 -------------------------------------------------------------------------------- [15:59:22] Accepted 11b8fbbc Diff 0.056/0.005 GPU 0 at Trademybit [15:59:27] Accepted aa5c5a44 Diff 0.006/0.005 GPU 0 at Trademybit [15:59:28] Accepted 7a40f6a0 Diff 0.008/0.005 GPU 0 at Trademybit [15:59:31] Accepted 3135dc6d Diff 0.020/0.005 GPU 0 at Trademybit [15:59:35] Accepted 904f73a9 Diff 0.007/0.005 GPU 0 at Trademybit [15:59:39] Accepted 39fabeaf Diff 0.017/0.005 GPU 0 at Trademybit
i know this is optimization lol, i was just showing the obvious is that a 280x at 1100c doing almost 2.9MH/s on x13? R9 280x MSI Gaming, GPU/MEM 1190/1500, x13.
|
|
|
|
PetrGasparik
Newbie
Offline
Activity: 25
Merit: 0
|
|
June 04, 2014, 02:07:25 PM |
|
ATI drivers 13.x vs 14.x, do you observe change in hashrate?
Since I can't get over 2,5Mh on x13 with R9 290 on 13.x drivers, I think about changing them. But because it is a lil bit scary for me (on Linux), I would like to make some research before.
|
|
|
|
Ninetoe
Newbie
Offline
Activity: 45
Merit: 0
|
|
June 04, 2014, 02:31:31 PM |
|
anyone got some good results on 5870 with the x13modold ?
cant seem to get past 1.1 MH
gpu 935 mem 1250 tc 8000 worksize 128 gpu-threads 1
tried with worksize 64 and 2 threads but same results
hashing happily at 1.95MH on x11
|
|
|
|
hellyeahent
|
|
June 04, 2014, 02:48:18 PM |
|
u fixed r9 290 already or still crashes badly ?
|
|
|
|
bigradeon
Member
Offline
Activity: 98
Merit: 10
|
|
June 04, 2014, 03:09:29 PM |
|
i realised that there is no difference between 1st X13 mod version and the last 03/06/2014, with my rig i got 2.7 per 280x P/S x13modold kern has decreased the hashrate
|
|
|
|
djm34
Legendary
Offline
Activity: 1400
Merit: 1050
|
|
June 04, 2014, 03:14:35 PM |
|
I just upgraded to the latest 14.6 driver and strangely it doesn't seem to work, I only get HW errors and no share at all with my R9 290x (Am I doing something wrong or is there anybody having the same problem ?)
|
djm34 facebook pageBTC: 1NENYmxwZGHsKFmyjTc5WferTn5VTFb7Ze Pledge for neoscrypt ccminer to that address: 16UoC4DmTz2pvhFvcfTQrzkPTrXkWijzXw
|
|
|
rajapatr1
Member
Offline
Activity: 189
Merit: 10
|
|
June 04, 2014, 03:18:37 PM |
|
New version i get 2.4mh old version get 2.5 why it lower same config
|
|
|
|
ebliever
Legendary
Offline
Activity: 1708
Merit: 1036
|
|
June 04, 2014, 03:22:26 PM |
|
u fixed r9 290 already or still crashes badly ?
I've been seeing increased crashes with my 290X's as well. Sometimes one goes sick and drops to about 40% hashrate and doesn't recover if CGwatcher restarts the miner app. In that case all I can do is have CGwatcher force a reboot if the hashrate drops below a certain threshhold. But it's happening a lot, like 2-3 times/hour in certain circumstances. Other times it runs stable for 12-15 hours. (Might be the mining pool used makes a difference somehow?)
|
Luke 12:15-21
Ephesians 2:8-9
|
|
|
lasybear (OP)
Member
Offline
Activity: 113
Merit: 14
|
|
June 04, 2014, 03:45:25 PM |
|
I just upgraded to the latest 14.6 driver and strangely it doesn't seem to work, I only get HW errors and no share at all with my R9 290x (Am I doing something wrong or is there anybody having the same problem ?)
Yep. Has read a lot of responses that 14.6 is bad for miners.
|
|
|
|
lasybear (OP)
Member
Offline
Activity: 113
Merit: 14
|
|
June 04, 2014, 03:47:34 PM |
|
New version i get 2.4mh old version get 2.5 why it lower same config Use old version. New version is mainly for old cards.
|
|
|
|
hellyeahent
|
|
June 04, 2014, 04:06:05 PM |
|
u fixed r9 290 already or still crashes badly ?
I've been seeing increased crashes with my 290X's as well. Sometimes one goes sick and drops to about 40% hashrate and doesn't recover if CGwatcher restarts the miner app. In that case all I can do is have CGwatcher force a reboot if the hashrate drops below a certain threshhold. But it's happening a lot, like 2-3 times/hour in certain circumstances. Other times it runs stable for 12-15 hours. (Might be the mining pool used makes a difference somehow?) change I to lower by 1. That helped me but lost 200KH/s coz of that
|
|
|
|
Elun
Member
Offline
Activity: 117
Merit: 10
|
|
June 04, 2014, 04:10:21 PM |
|
u fixed r9 290 already or still crashes badly ?
I've been seeing increased crashes with my 290X's as well. Sometimes one goes sick and drops to about 40% hashrate and doesn't recover if CGwatcher restarts the miner app. In that case all I can do is have CGwatcher force a reboot if the hashrate drops below a certain threshhold. But it's happening a lot, like 2-3 times/hour in certain circumstances. Other times it runs stable for 12-15 hours. (Might be the mining pool used makes a difference somehow?) change I to lower by 1. That helped me but lost 200KH/s coz of that Stability is more important)
|
|
|
|
SomeRelax
|
|
June 04, 2014, 04:24:44 PM |
|
x13mod with some my optimizations only in OpenCL code, not miner codesgminer - Started: [2014-06-04 15:58:48] - [0 days 00:01:46] -------------------------------------------------------------------------------- (5s):2.874M (avg):2.865Mh/s | A:15 R:0 HW:0 WU:0.053/m ST: 1 SS: 0 NB: 2 LW: 167 GF: 0 RF: 0 Connected to Trademybit (stratum) diff 0.020 as user someone.5 Block: 51133e8a... Diff:232 Started: [15:59:04] Best share: 0.688 -------------------------------------------------------------------------------- [P]ool management [G]PU management [S]ettings [D]isplay options [Q]uit GPU 0: 68.0C 1139RPM | 2.881M/2.953Mh/s | A:16 R: 0.0% HW:0 WU:0.053/m rI:81920 -------------------------------------------------------------------------------- [15:59:22] Accepted 11b8fbbc Diff 0.056/0.005 GPU 0 at Trademybit [15:59:27] Accepted aa5c5a44 Diff 0.006/0.005 GPU 0 at Trademybit [15:59:28] Accepted 7a40f6a0 Diff 0.008/0.005 GPU 0 at Trademybit [15:59:31] Accepted 3135dc6d Diff 0.020/0.005 GPU 0 at Trademybit [15:59:35] Accepted 904f73a9 Diff 0.007/0.005 GPU 0 at Trademybit [15:59:39] Accepted 39fabeaf Diff 0.017/0.005 GPU 0 at Trademybit
would you mind please to share your full settings? i get 2.66mh for exact same gpu (msi R9 280x Gaming) thanks
|
|
|
|
lasybear (OP)
Member
Offline
Activity: 113
Merit: 14
|
|
June 04, 2014, 04:31:17 PM |
|
x13mod with some my optimizations only in OpenCL code, not miner codesgminer - Started: [2014-06-04 15:58:48] - [0 days 00:01:46] -------------------------------------------------------------------------------- (5s):2.874M (avg):2.865Mh/s | A:15 R:0 HW:0 WU:0.053/m ST: 1 SS: 0 NB: 2 LW: 167 GF: 0 RF: 0 Connected to Trademybit (stratum) diff 0.020 as user someone.5 Block: 51133e8a... Diff:232 Started: [15:59:04] Best share: 0.688 -------------------------------------------------------------------------------- [P]ool management [G]PU management [S]ettings [D]isplay options [Q]uit GPU 0: 68.0C 1139RPM | 2.881M/2.953Mh/s | A:16 R: 0.0% HW:0 WU:0.053/m rI:81920 -------------------------------------------------------------------------------- [15:59:22] Accepted 11b8fbbc Diff 0.056/0.005 GPU 0 at Trademybit [15:59:27] Accepted aa5c5a44 Diff 0.006/0.005 GPU 0 at Trademybit [15:59:28] Accepted 7a40f6a0 Diff 0.008/0.005 GPU 0 at Trademybit [15:59:31] Accepted 3135dc6d Diff 0.020/0.005 GPU 0 at Trademybit [15:59:35] Accepted 904f73a9 Diff 0.007/0.005 GPU 0 at Trademybit [15:59:39] Accepted 39fabeaf Diff 0.017/0.005 GPU 0 at Trademybit
would you mind please to share your full settings? i get 2.66mh for exact same gpu (msi R9 280x Gaming) thanks "rawintensity" : "81920", "vector" : "1", "worksize" : "128", "kernel" : "x13mod", "lookup-gap" : "2", "gpu-engine" : "1190", "gpu-fan" : "20-95", "gpu-memclock" : "1500", "gpu-memdiff" : "0", "gpu-powertune" : "20", "gpu-vddc" : "1.200", "temp-cutoff" : "90", "temp-overheat" : "83", "temp-target" : "70", "api-listen" : true, "api-mcast-port" : "4028", "api-port" : "4028", "auto-fan" : true, "expiry" : "1", "failover-switch-delay" : "60", "gpu-dyninterval" : "7", "gpu-platform" : "0", "gpu-threads" : "2", "log" : "5", "no-pool-disable" : true, "no-submit-stale" : true, "queue" : "0", "scan-time" : "1", "temp-hysteresis" : "4", "shares" : "0"
|
|
|
|
ShakinHandz
|
|
June 04, 2014, 04:59:57 PM |
|
I can't get this to run, I've followed all instructions and have compiled sgminer plenty of times before and get this error: "/tmp/OCL9915T23.cl", line 896: error: identifier "buf" i [12:58:58] Failed to init GPU thread 2, disabling device 2 [12:58:58] Kernel x13mod is experimental. [12:59:00] Error -11: Building Program (clBuildProgram) [12:59:00] "/tmp/OCL9915T26.cl", line 885: error: identifier "buf" is undefined INPUT_BIG; ^
"/tmp/OCL9915T26.cl", line 891: error: identifier "buf" is undefined INPUT_BIG;
|
|
|
|
leo0808
|
|
June 04, 2014, 05:33:39 PM |
|
Open source (== NO HIDDEN MININGS) version of X11/X13 algo sgminer with separate kernels. Upd. 2014-06-03- Fix x13mod for AMD HD 5xxx/6xxx cards. Use for these cards "kernel" : "x13modold" in config file or -k x13modold from the command line. All parameters (intensity, threads etc) need to be tuned individually.
- A little improvement in hamsi kernel.
- Further fixes and improvements will be committed to innovative sgminer 5 only: https://github.com/sgminer-dev/sgminer/tree/v5_0.
Windows binaries (actual): https://www.dropbox.com/s/sodbzky1e3p2d32/sgminer_x11x13mod_03_06_2014.zipUpd. 2014-05-28- Added x13mod (Marucoin, Boostcoin etc) support
- Increased time to SICK state
- Experimental: hashbuffer allocation depends of initial {i, xi, rawi}ntensity. Maybe increase a stability, maybe not...
Windows binaries (previous): https://www.dropbox.com/s/umdtns7vfvpnca4/X13mod.zipMainly thanks, obviously, girino for his brilliant idea. Thanks to Elun for actual Windows binaries. Thanks to Remember remember the 5th of November for extracting kernels file from "girino's 2% fee version miner" and providing Windows binaries. Increased time to SICK state (WTF? - read https://bitcointalk.org/index.php?topic=623409.msg6949113#msg6949113) Sources: https://github.com/lasybear/sph-sgminer_x11mod## Mod x11 (separate kernels) 0. Use "kernel" : "x11mod" in config file or -k x11mod via command line. 1. In case of instability please set a little bit lower engine frequency than a original sgminer. Do not hesitate to donate Remember remember the 5th of NovemberBTC 1AiCRMxgf1ptVQwx6hDuKMu4f7F27QmJC2 DRK XrVcX5LEiUVxWRTBMbomopJkfHc3uGDQHe lasybearBTC 1LykvDuT7PCJ2xgT513RsyWQSZ9pbrDFa6 LTC LYpe5amuVYdSKmi3D5HCoKMeBd6yty8xVi DRK XxMb95zfrxw8Csh9hSX3T98McDGZqk3Qrm ElunBTC 1BEwra7RRPtkh8TbPLPVtNMfxgcW2udKph My experience: Single MSI R9 280x 3.5 MH/s"intensity" : "16", "vector" : "1", "worksize" : "256", "kernel" : "x11mod", "thread-concurrency" : "8192", "lookup-gap" : "2", "gpu-engine" : "1200", "gpu-memclock" : "1500", "gpu-powertune" : "20", "gpu-vddc" : "1.200", "gpu-threads" : "2" Rig 5 x Sapphire R9 270x Vapor-X 10.45 MH/s (~ 2.09 MH/s per card) "intensity" : "16", "vectors" : "1", "worksize" : "128", "kernel" : "x11mod", "thread-concurrency" : "8192", "lookup-gap" : "2", "gpu-engine" : "1150", "gpu-memclock" : "1500", "gpu-powertune" : "20", "gpu-vddc" : "1.150", "gpu-threads" : "2" ## Mod x13 (separate kernels) 0. Use "kernel" : "x13mod" in config file or -k x13mod via command line. 1. In case of instability please set a little bit lower engine frequency than a original sgminer. My experience: Single MSI R9 280x 2.4 MH/s"intensity" : "16", "vector" : "1", "worksize" : "256", "kernel" : "x13mod", "thread-concurrency" : "8192", "lookup-gap" : "2", "gpu-engine" : "1200", "gpu-memclock" : "1500", "gpu-powertune" : "20", "gpu-vddc" : "1.200", "gpu-threads" : "2" Rig 5 x Sapphire R9 270x Vapor-X 8 MH/s (~ 1.6 MH/s per card) "intensity" : "16", "vectors" : "1", "worksize" : "128", "kernel" : "x13mod", "thread-concurrency" : "8192", "lookup-gap" : "2", "gpu-engine" : "1150", "gpu-memclock" : "1500", "gpu-powertune" : "20", "gpu-vddc" : "1.150", "gpu-threads" : "2" If you need help with other cards, please read topic (or search by you card name). Thanks for all. Good mining ) Hi I got a 4x6950. What will be the hashrate for x11mod and settings and tuning for its?
|
|
|
|
|