[ANN][X11/X13] X11 (Darkcoin)/X13 (Marucoin) miner (based on sph-sgminer)

[bullus]

Which driver should I use for 5gpu and windows7 64bit to get the boost with 14.6 files/drivers? (7950's)
With 14.4 drivers I can't install the drivers for the fith one, get a explanation icon.

Any suggestions?

[ernesthor]

I'm full of HW error with new drivers, new and old mods...
Could you help me? 280x Gigabyte

[Undland]

Anybody know how much X13 shares 7790\260X must get on Bamt?

[alphateam]

Possible to add X15 one day?

[kenshirothefist]

FYI: anybody following this thread should switch to this thread: https://bitcointalk.org/index.php?topic=632503.0 ... this miner is not being developed any more and has been merged into sgminer_v5 (with optimized X11,X13,nist5 alogs, support for 14.6 drivers with higher hashrates, etc.).

[chadwickx16]

I'm trying the beta driver 14.6, it's causing Hardware errors on X11 mining whilts I lowered the gpu to 1010 and mem clock to 1250. I tried also intensity 16 didn't resolve also.. Could someone help me out here on my Sapphire R290X ?

Help appreciated..

I'm full of HW error with new drivers, new and old mods...
Could you help me? 280x Gigabyte

Did you download djm's miner?? If you don't then all you'll get is HW errors. I'll see if I can find the page....  You can find it here: https://bitcointalk.org/index.php?topic=658438.0

[chadwickx16]

This topic is a mess, i got a R9 280X, i spend more than 1 hour reading and testing things here and I still do not know if my hashrates are good.

R9 280X:
X11 = 3,1 Mh/s
X13 = 2,5 Mh/s

I wont push my GPU to more than 1040 mhz<--That's why!

[gemmacoin]

OK, guys, sorry to ask such a recap question but I missed some discussion here for some time:
What would be the fastest combination for Gigabyte R9280x cards in terms of kernel/driver/config/sgminer?
Currently I have W7 64bit with 14.6 driver, 4.1 sgminer and getting 2.55 MHs for each card with below.

"worksize" : "256,256,256,256",
"kernel" : "x13mod,x13mod,x13mod,x13mod",
"lookup-gap" : "0,0,0,0",
"thread-concurrency" : "8193,8193,8193,8193",
"shaders" : "0,0,0,0",
"gpu-threads" : "2,2,2,2",
"gpu-engine" : "1090,1090,1090,1090",
"gpu-memclock" : "1500,1500,1500,1500",

"x13mod" means the 31 kB (older) version.
This newer "X13mod" did not compile with some crazy error message (Some function made error at some specific line during compile.)

I can see people reporting 2.7 MHs for the same card. Can you point me to the right files and examples please?

For all of you having errors compiling X13, please update your hamsi_helper.cl file (located in kernel dir) with the code provided at:

https://raw.githubusercontent.com/lasybear/sph-sgminer_x11mod/f10bf3a6f9db481611e85495eb793e21b94ed605/kernel/hamsi_helper.cl

That worked for me!

[zmija]

Hi i have Asus DC2-TOP R9 280x @4.2 Mhash

"api-allow" : "W:127.0.0.1",
"api-listen" : true,
"api-port" : "4028",
"expiry" : "1",
"hotplug" : "5",
"kernel-path" : "/usr/local/bin",
"log" : "5",
"queue" : "0",
"scan-time" : "1",
"scrypt" : true,
"shares" : "0",
"auto-fan" : true,
"gpu-threads" : "2",
"gpu-dyninterval" : "7",
"gpu-engine" : "1090",
"gpu-fan" : "40-100",
"gpu-platform" : "0",
"gpu-memclock" : "1500",
"gpu-memdiff" : "0",
"gpu-powertune" : "0",
"gpu-vddc" : "0.000",
"xintensity" : "128",
"kernel" : "x11mod",
"temp-target" : "65",
"temp-overheat" : "85",
"temp-cutoff" : "75",
"temp-hysteresis" : "3",
"vectors" : "1",
"worksize" : "256",
"lookup-gap" : "2",
"shaders" : "2048,",
"thread-concurrency" : "8192",
"failover-only" : true,
"failover-switch-delay" : "10",
"no-pool-disable" : true

[zmija]

My Gigabyte HD 7850 settings @ 2.1 Mhash

"xintensity" : "256",
"worksize" : "256",
"kernel" : "x11mod",
"lookup-gap" : "0",
"thread-concurrency" : "9080",
"shaders" : "1024",
"gpu-threads" : "2",
"gpu-engine" : "1150",
"gpu-fan" : "30-90",
"gpu-memclock" : "1300",
"gpu-memdiff" : "0",
"gpu-powertune" : "0",
"gpu-vddc" : "0.000",
"temp-cutoff" : "85",
"temp-overheat" : "75",
"temp-target" : "65",
"api-mcast-port" : "4028",
"api-port" : "4028",
"auto-fan" : true,
"expiry" : "1",
"failover-only" : true,
"failover-switch-delay" : "10",
"gpu-dyninterval" : "7",
"gpu-platform" : "0",
"log" : "5",
"no-pool-disable" : true,
"queue" : "0",
"scan-time" : "1",
"tcp-keepalive" : "30",
"temp-hysteresis" : "3",
"shares" : "0",
"kernel-path" : "/usr/local/bin",
"no-client-reconnect" : true

[XPM-guru]

Can someone update the first post with latest compiled windows miner? Getting tired of re compiling always... Or post it with big title somewhere here?

[melthdown]

hi my sgminer runs perffectly no errors but when i check on the website it says miner is dead whats the problem? runing an r9 290 with 5.4MH/s  14.6 beta driver

,
"intensity" : "16",
"xintensity" : "0",
"rawintensity" : "0",
"worksize" : "512",
"kernel" : "x11mod",
"lookup-gap" : "0",
"thread-concurrency" : "32765",
"shaders" : "2560",
"gpu-threads" : "2",
"gpu-engine" : "0-0",
"gpu-fan" : "0-0",
"gpu-memclock" : "1370",
"gpu-memdiff" : "0",
"gpu-powertune" : "20",
"gpu-vddc" : "0.000",
"temp-cutoff" : "95",
"temp-overheat" : "85",
"temp-target" : "75",
"api-mcast-port" : "4028",
"api-port" : "4028",
"expiry" : "28",
"failover-switch-delay" : "60",
"gpu-dyninterval" : "7",
"gpu-platform" : "0",
"log" : "5",
"no-pool-disable" : true,
"queue" : "1",
"scan-time" : "7",
"tcp-keepalive" : "30",
"temp-hysteresis" : "3",
"shares" : "0",
"kernel-path" : "/usr/local/bin"

http://s29.postimg.org/e7pk2ik9z/Untitled.jpg

[suchmoon]

hi my sgminer runs perffectly no errors but when i check on the website it says miner is dead whats the problem? runing an r9 290 with 5.4MH/s  14.6 beta driver

,
"intensity" : "16",
"xintensity" : "0",
"rawintensity" : "0",
"worksize" : "512",
"kernel" : "x11mod",
"lookup-gap" : "0",
"thread-concurrency" : "32765",
"shaders" : "2560",
"gpu-threads" : "2",
"gpu-engine" : "0-0",
"gpu-fan" : "0-0",
"gpu-memclock" : "1370",
"gpu-memdiff" : "0",
"gpu-powertune" : "20",
"gpu-vddc" : "0.000",
"temp-cutoff" : "95",
"temp-overheat" : "85",
"temp-target" : "75",
"api-mcast-port" : "4028",
"api-port" : "4028",
"expiry" : "28",
"failover-switch-delay" : "60",
"gpu-dyninterval" : "7",
"gpu-platform" : "0",
"log" : "5",
"no-pool-disable" : true,
"queue" : "1",
"scan-time" : "7",
"tcp-keepalive" : "30",
"temp-hysteresis" : "3",
"shares" : "0",
"kernel-path" : "/usr/local/bin"

You have not submitted a single share (A: 0). How long did you let it run? Try d=0.008 as your password. Post a full screenshot of sgminer or its output with "-T" parameter if it still doesn't work.

[unitedminers]

Yesterday, the Coinking website (X13) showed 0,002 to 0,003 BTC/MHash/24h during the day. I've mined with 35 MH/s at Coinking since yesterday 10 AM and 24h later (=0,0025 x 35MH/s x 560$ = 49$) I've got 3,00$

Can someone recommend a X13 multipool?

Anyone used this on ubuntu or BAMT and can confirm that is working? Also what Catalyst for linux?

Xubuntu 13.10 with Kernel 3.16 RC2
AMD Catalyst 14.6 Beta
SPH-SGMiner with 14.6 Fix https://github.com/djm34/sph-sgminer_x11mod
X11: R9 290 x3 = 4600 kH/s x3
X13: R9 290 x3 = 2900 kH/s x3

I'm full of HW error with new drivers, new and old mods...
Could you help me? 280x Gigabyte

Try this: https://github.com/djm34/sph-sgminer_x11mod

This topic is a mess, i got a R9 280X, i spend more than 1 hour reading and testing things here and I still do not know if my hashrates are good.

R9 280X:
X11 = 3,1 Mh/s
X13 = 2,5 Mh/s

I wont push my GPU to more than 1040 mhz

X11: R9 290 x3 = 4600 kH/s x3
X13: R9 290 x3 = 2900 kH/s x3

[tobenary]

Try this: https://github.com/djm34/sph-sgminer_x11mod

Is it already implemented on PIMP 1.5.51 16.4 drivers, or should I do pimpupdate ?

[GGin]

hi my sgminer runs perffectly no errors but when i check on the website it says miner is dead whats the problem? runing an r9 290 with 5.4MH/s  14.6 beta driver

,
"intensity" : "16",
"xintensity" : "0",
"rawintensity" : "0",
"worksize" : "512",
"kernel" : "x11mod",
"lookup-gap" : "0",
"thread-concurrency" : "32765",
"shaders" : "2560",
"gpu-threads" : "2",
"gpu-engine" : "0-0",
"gpu-fan" : "0-0",
"gpu-memclock" : "1370",
"gpu-memdiff" : "0",
"gpu-powertune" : "20",
"gpu-vddc" : "0.000",
"temp-cutoff" : "95",
"temp-overheat" : "85",
"temp-target" : "75",
"api-mcast-port" : "4028",
"api-port" : "4028",
"expiry" : "28",
"failover-switch-delay" : "60",
"gpu-dyninterval" : "7",
"gpu-platform" : "0",
"log" : "5",
"no-pool-disable" : true,
"queue" : "1",
"scan-time" : "7",
"tcp-keepalive" : "30",
"temp-hysteresis" : "3",
"shares" : "0",
"kernel-path" : "/usr/local/bin"

http://s29.postimg.org/e7pk2ik9z/Untitled.jpg

...you are full of HW errors!!!

Follow this rules and fix this issue.  https://bitcointalk.org/index.php?topic=658438.msg7555998#msg7555998

[yudhistira]

Anyone can tell me, where should get update about this pool

http://www.drkpool.com/

seems like death now
my 2 drk still there

 

[romeshomey]

I can only seem to get about 1.28 mh/s with my R9 270's with this .bat..  any ideas how I can improve hashrate without changing the engine / memclock?

Code:

-g 2 -w 128 --gpu-engine 1050 --gpu-memclock 1450 --thread-concurrency 15361 -I 20 --lookup-gap 2 --auto-fan --temp-target 77 --temp-overheat 83 --temp-cutoff 85

[COOLERbyPSP]

--thread-concurrency 15361

Try to use MUCH lower values. 7970 for example is a bit faster with 4096, than 8192. And With -I 17, than 18 or 19.

-w 128

Try 64 or 256.

[Mastermine]

I can only seem to get about 1.28 mh/s with my R9 270's with this .bat..  any ideas how I can improve hashrate without changing the engine / memclock?

Code:

-g 2 -w 128 --gpu-engine 1050 --gpu-memclock 1450 --thread-concurrency 15361 -I 20 --lookup-gap 2 --auto-fan --temp-target 77 --temp-overheat 83 --temp-cutoff 85

"rawintensity" : "131088",
"worksize" : "256",
"thread-concurrency" : "13188",
"gpu-threads" : "2"

^^ over 2.6mh/s per 270 on x11 and 1.9mh/s+ on x13 using 14.6 drivers and the new miner fixed:

https://mega.co.nz/#!VYdChDTb!z22fJmx_rFoYg8sQecRwh9FEVWKP063PGN4XdeM22O8

Clocks will of course effect hashrates too.  I always recommend adjusting core/mem clock with msi afterburner or something similar.  Find the best settings before adding them to your config.  Its goin to vary from gpu to gpu and you can push a little more with the proper clocks and some tinkering.