[Awesome Miner] - Powerful Windows GUI to manage and monitor up to 200000 miners

[slysir]

How to show correct price for BEAM? Coin tab shows Revenue $21,779. Coin properties appear to be correct.

[1714495697]

1714495697

[1714495697]

1714495697

[1714495697]

1714495697

[Marvell2]

why do i get mining interface offline when the card is mining and awesomeminer agent is running?  its happening now on phoeniexminer

[patrike]

Hi Patrik,

question, or maybe a suggestion

Is it possible in the rules to set some trigger for a rig A, but the action (like a start/stop miner command) is for another rig B? Or maybe multiple rigs B, C, D, .....?

If this is not possible right now, it would be awesome if you could do that.

Thanks for the suggestion. This isn't possible today.

Can you give an example of when this might be useful? This would be of help for me to understand what's missing today. Thanks!

Hey Patrik,

here are two examples for my own benefit.

I have a few watercooled rigs with 2 seperated rigs in 1 water-loop. If for whatever reason the main-rig turns off, there is no waterflow anymore and I have to shutdown the second rig too. Right now that shutdown is managed by a smart socket, but if AM could handle that with just a rule and much faster, it would be awesome.

I also have multiple containers, running each 4 rigs inside, but with just 1 power line per container. If the main-rig including the power for the containers airflow turns off, I have to shut down the other 3 rigs to protect them of overheating. AM could handle that even faster than any smart socket.

I think this option can be useful for other miners too, to protect rigs in a better way without using external stuff like smart sockets or so. How could this be done? One idea would be in the rules -> actions -> "miner command" for example another line which is already set to "this miner/group", but I also can choose other miners or groups. But maybe you will find a better way like always

And patrike it is possible at the moment to shutdown many rigs if one rig goes down. You can set a rule that push an .cmd file with start/stop api commands or shutdown.

Much work at the moment, but it is possible. An easier way would be nice, but not for the strange scenario joseph32 explained.

Thanks for all feedback. I think it would be quite easy to extent the rule concept to let you manually define for which specific miners the actions should be performed. I will look into this and it can hopefully be supported soon.

[patrike]

all my profit profiles disappeared and when i go to edit them there is only one to select from... Ethereum.

it is like this for all my miners/rigs

Please open the Options dialog, Algorithms section and see if you have unchecked most algorithms. Your profit profile will only list the algorithms that are enabled on a global level (Options dialog, Algorithms section).

[patrike]

How to show correct price for BEAM? Coin tab shows Revenue $21,779. Coin properties appear to be correct.

When I'm looking at Beam from WhatToMine right now, it looks fine and a hashrate of 50H/s gives ~$2.7/day. Are you using all default values in the Coin Properties? Do you still experience this issue or was it only temporary?

[MoparMiningLLC]

all my profit profiles disappeared and when i go to edit them there is only one to select from... Ethereum.

it is like this for all my miners/rigs

Please open the Options dialog, Algorithms section and see if you have unchecked most algorithms. Your profit profile will only list the algorithms that are enabled on a global level (Options dialog, Algorithms section).

yes that was it - though I never unchecked it. i was sitting here watching it and all of a sudden all my miners went to not showing their power usage or profit margin - but this fixed it. not sure how they got all unchecked.

[patrike]

why do i get mining interface offline when the card is mining and awesomeminer agent is running?  its happening now on phoeniexminer

"Interface offline" indicates that Awesome Miner doesn't get any monitoring information from the mining software. Can you please select the miner and send me the API report (toolbar: Tools -> API Report), and I can verify if Phoenix Miner is giving any updates.

Do you see any error messages in the Phoenix Miner window when it's starting?

[slysir]

How to show correct price for BEAM? Coin tab shows Revenue $21,779. Coin properties appear to be correct.

When I'm looking at Beam from WhatToMine right now, it looks fine and a hashrate of 50H/s gives ~$2.7/day. Are you using all default values in the Coin Properties? Do you still experience this issue or was it only temporary?

In the 'Miners' Tab BEAM coin shows $0.00 per day

In the 'Coins' Tab BEAM is at the top of the list when sorting by Revenue at $961,115 and using the Default Coin Properties values:

Difficulty: 26,530,270.00
Block reward:  40.0
Exchange rate: 0.00003320 BTC
Block time 60 s
Calculation: Difficulty, Block reward and Block time

[Marvell2]

why do i get mining interface offline when the card is mining and awesomeminer agent is running?  its happening now on phoeniexminer

"Interface offline" indicates that Awesome Miner doesn't get any monitoring information from the mining software. Can you please select the miner and send me the API report (toolbar: Tools -> API Report), and I can verify if Phoenix Miner is giving any updates.

Do you see any error messages in the Phoenix Miner window when it's starting?

thats the api report

Version: 7.8.4 (40)
API command: miner_getstat2



<?xml version="1.0" encoding="utf-16"?>
<StatusUpdate xmlns:xsd="http://www.w3.org/2001/XMLSchema" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance">
  <MinerId>46</MinerId>
  <Privileged>false</Privileged>
  <ResponseTime>0</ResponseTime>
  <CoinStatusList />
  <ProcessStatus>
    <Arguments>  -cclock 1300  -cvddc 825  -mclock 1800  -tstop 75  -hstats 2  -mt 2
 -wdog 1 -rmode 0 -cdm 2 -cdmport 4028</Arguments>
    <Configuration>POOL: stratum+tcp://eth-us-west1.nanopool.org:9999, WAL: 0xa57EeFabb76Bfd1E9E6ee606999b76BD123aFe32.91, PASS: x, PROTO: 2, ALLPOOLS: 1

==========
</Configuration>
    <Pid>4020</Pid>
    <StartedUtc>2020-07-27T18:10:50.6853188Z</StartedUtc>
    <InstanceId>1</InstanceId>
    <MainWindowHandle>197034</MainWindowHandle>
  </ProcessStatus>
  <SystemStatus>
    <OperatingSystem>Microsoft Windows 10 Pro 64-bit</OperatingSystem>
    <MachineName>DESKTOP-IE1C2TE</MachineName>
    <IsAdminProcess>false</IsAdminProcess>
    <IsService>false</IsService>
    <WindowsUptimeSeconds>34905</WindowsUptimeSeconds>
    <IdleTimeMs>262453</IdleTimeMs>
    <DotNetVersion>4.8</DotNetVersion>
    <CpuStatusList>
      <CpuStatus>
        <Name>Intel Pentium G4400</Name>
        <CoreCount>2</CoreCount>
        <ThreadPerCore>1</ThreadPerCore>
        <CoreClockList>
          <SensorValues>
            <Value>903.33660888671875</Value>
            <Max>3312.234130859375</Max>
          </SensorValues>
          <SensorValues>
            <Value>1003.7073364257813</Value>
            <Max>3312.234130859375</Max>
          </SensorValues>
        </CoreClockList>
        <Temperature>
          <Value>38</Value>
          <Max>48</Max>
        </Temperature>
        <CoreTempList>
          <SensorValues>
            <Value>32</Value>
            <Max>46</Max>
          </SensorValues>
          <SensorValues>
            <Value>30</Value>
            <Max>48</Max>
          </SensorValues>
        </CoreTempList>
        <Load>
          <Value>2.3219823837280273</Value>
          <Max>100</Max>
        </Load>
        <CoreLoadList>
          <SensorValues>
            <Value>3.4055769443511963</Value>
            <Max>100</Max>
          </SensorValues>
          <SensorValues>
            <Value>1.2383878231048584</Value>
            <Max>100</Max>
          </SensorValues>
        </CoreLoadList>
        <PackagePower>
          <Value>1.1713352203369141</Value>
          <Max>18.590593338012695</Max>
        </PackagePower>
        <CorePower>
          <Value>0.37799051403999329</Value>
          <Max>17.793333053588867</Max>
        </CorePower>
      </CpuStatus>
    </CpuStatusList>
    <GpuStatusList>
      <GpuStatus>
        <Name>AMD Radeon RX 5700 XT</Name>
        <SubvendorName>MSI</SubvendorName>
        <IsNvidia>false</IsNvidia>
        <PciBusId>5</PciBusId>
        <VendorDeviceId>0</VendorDeviceId>
        <GlobalDeviceId>0</GlobalDeviceId>
        <Power>
          <Value>134.12502283912</Value>
          <Max>136</Max>
        </Power>
        <Voltage>
          <Value>0.831</Value>
          <Max>0.831</Max>
        </Voltage>
        <CoreClock>
          <Value>1265</Value>
          <Max>1273</Max>
        </CoreClock>
        <MemoryClock>
          <Value>1800</Value>
          <Max>1800</Max>
        </MemoryClock>
        <Temperature>
          <Value>69</Value>
          <Max>74</Max>
        </Temperature>
        <Load>
          <Value>99</Value>
          <Max>99</Max>
        </Load>
        <FanRpm>
          <Value>0</Value>
          <Max>1656</Max>
        </FanRpm>
        <FanPercent>
          <Value>30</Value>
          <Max>30</Max>
        </FanPercent>
        <Uuid>PCI_VEN_1002&amp;DEV_731F&amp;SUBSYS_38161462&amp;REV_C1_6&amp;1A84F085&amp;0&amp;000000DBA</Uuid>
      </GpuStatus>
    </GpuStatusList>
    <MemoryStatus>
      <Used>2704887808</Used>
      <Available>5841481728</Available>
    </MemoryStatus>
    <DriveStatusList>
      <DriveStatus>
        <Name>Local Disk (C:\)</Name>
        <Available>153496141824</Available>
        <Total>239462248448</Total>
      </DriveStatus>
    </DriveStatusList>
    <AmdDriverVersion>20.4.2</AmdDriverVersion>
    <NvidiaDriverVersion>445.87</NvidiaDriverVersion>
    <MacAddress>1C1B0DA917AA</MacAddress>
    <IsLinux>false</IsLinux>
  </SystemStatus>
  <AccessDenied>false</AccessDenied>
  <ConsoleStatus>
    <IsText>true</IsText>
  </ConsoleStatus>
</StatusUpdate>

<?xml version="1.0" encoding="utf-16"?>
<MinerControlState xmlns:xsd="http://www.w3.org/2001/XMLSchema" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance">
  <State>Executing</State>
  <ApiState>Disconnected</ApiState>
  <PendingCommand>false</PendingCommand>
  <MarkedForRemoval>false</MarkedForRemoval>
  <Error />
  <PingState>None</PingState>
  <QueueSize>1</QueueSize>
  <ShouldPing>false</ShouldPing>
</MinerControlState>

<?xml version="1.0" encoding="utf-16"?>
<ManagedMiner xmlns:xsd="http://www.w3.org/2001/XMLSchema" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance">
  <ID>46</ID>
  <Type>Managed</Type>
  <Description>91 Amd Test Box</Description>
  <Enabled>true</Enabled>
  <EngineType>PhoenixMiner</EngineType>
  <EngineSubType>Disabled</EngineSubType>
  <RemoteProxyHostId>0</RemoteProxyHostId>
  <LastKnownAlgorithm>Ethereum</LastKnownAlgorithm>
  <StatusQueryInterval>5</StatusQueryInterval>
  <SortOrder>3</SortOrder>
  <GroupID>0</GroupID>
  <UserNotes>-mi 14 -wdog 0 -cclock 1230 -cvddc 755 -mclock 1870 -tstop 75 -tstart 60 -hstats 2 -tt -30 -mt 2..

trying this stable
-wd 0 -gt 100  -cclock 1550 -cvddc 900 -mclock 1900 -tstop 75 -tstart 60 -hstats 2 

was stable on all
 -cclock 1340  -cvddc 900 -mclock 1820 -tstop 75 -tstart 60 -hstats 2 

try 810 on last now to lower power use and lsightly higer meme
 -cclock 1340  -cvddc 825,825,750  -mclock 1800,1840,1840 -tstop 75 -tstart 60 -hstats 2  </UserNotes>
  <HighlightColor>None</HighlightColor>
  <TagList />
  <UseWorkerSuffix>true</UseWorkerSuffix>
  <WorkerSuffix>91</WorkerSuffix>
  <SshPort>22</SshPort>
  <UseCustomSshCredentials>false</UseCustomSshCredentials>
  <CloudConnected>false</CloudConnected>
  <ProfitProfileType>Single</ProfitProfileType>
  <ProfitProfileId>-1</ProfitProfileId>
  <DeviceNameList />
  <MacAddress>1C1B0DA917AA</MacAddress>
  <HasFirmwareLicense>false</HasFirmwareLicense>
  <RuleData>
    <Variables />
  </RuleData>
  <HasUpgradedCustomWorker>true</HasUpgradedCustomWorker>
  <HostId>52</HostId>
  <PoolType>Single</PoolType>
  <PoolId>848</PoolId>
  <DeviceProfileId>-1</DeviceProfileId>
  <EnvironmentVars>GPU_FORCE_64BIT_PTR 0
GPU_MAX_HEAP_SIZE 100
GPU_USE_SYNC_OBJECTS 1
GPU_MAX_ALLOC_PERCENT 100
GPU_SINGLE_ALLOC_PERCENT 100
</EnvironmentVars>
  <CommandLineParams> -cclock 1300  -cvddc 825  -mclock 1800  -tstop 75  -hstats 2  -mt 2
</CommandLineParams>
  <UseBatchCommands>false</UseBatchCommands>
  <BatchCommands />
  <UseBatchCommandsBeforeStop>false</UseBatchCommandsBeforeStop>
  <BatchCommandsBeforeStop />
  <UseBatchCommandsAfterStop>false</UseBatchCommandsAfterStop>
  <BatchCommandsAfterStop />
  <ProfitUseCustomExecutable>false</ProfitUseCustomExecutable>
  <ProfitCustomBatchCommands />
  <SettingValues />
  <WindowMode>ConsoleFormat</WindowMode>
  <ProcessPriority>Normal</ProcessPriority>
  <ProcessAffinity />
  <CleanBinFiles>true</CleanBinFiles>
  <UseOverrideConfig>false</UseOverrideConfig>
  <OverrideConfigFile />
  <UseOverrideExcavatorConfig>false</UseOverrideExcavatorConfig>
  <OverrideExcavatorConfig />
  <UseOverrideSrbMinerConfig>false</UseOverrideSrbMinerConfig>
  <MinerConfigFileSettings />
  <InstanceId>0</InstanceId>
  <Autostart>false</Autostart>
  <AutostartDelay>0</AutostartDelay>
  <EngineSettings>
    <AutoDownload>true</AutoDownload>
    <Type>PhoenixMiner</Type>
    <EnginePath />
    <Algorithm>Ethereum</Algorithm>
    <SubType>Disabled</SubType>
    <UseCustomExecutable>false</UseCustomExecutable>
    <CustomExecutable />
  </EngineSettings>
  <StartedUtc>2020-07-27T18:10:49.5747578Z</StartedUtc>
  <LimitedPoolPrioritizeList />
  <LimitedVirtualPoolList />
  <IsProfitMiner>false</IsProfitMiner>
  <PoolProfitList />
  <PredefinedPoolWorkerList />
  <CustomWorkerList />
  <UseCustomPoolWorker>false</UseCustomPoolWorker>
  <UseStartClockingProfile>true</UseStartClockingProfile>
  <StartClockingProfile>116</StartClockingProfile>
  <StartClockingProfileType>Single</StartClockingProfileType>
  <UseStopClockingProfile>false</UseStopClockingProfile>
  <StopClockingProfile>-1</StopClockingProfile>
  <StopClockingProfileType>Single</StopClockingProfileType>
  <GpuSelectionType>All</GpuSelectionType>
  <GpuSelectionList />
  <IsGenericWithMonitoring>false</IsGenericWithMonitoring>
  <BatchCommandsAsAdmin>false</BatchCommandsAsAdmin>
  <UseGpuMapping>true</UseGpuMapping>
  <GpuOrderList>
    <int>1</int>
    <int>0</int>
    <int>2</int>
  </GpuOrderList>
  <RunAsAdmin>true</RunAsAdmin>
  <IsTemplate>false</IsTemplate>
  <CurrentTemplate>AMD ethereum Nanopool -5700</CurrentTemplate>
  <HasTemplateWorkerSuffix>false</HasTemplateWorkerSuffix>
  <HasTemplateCommandLine>true</HasTemplateCommandLine>
  <HasTemplateClockingProfile>true</HasTemplateClockingProfile>
  <RunningWorkerList />
  <RunningGpuList />
  <ProfitUseStartClockingProfile>false</ProfitUseStartClockingProfile>
  <ProfitStartClockingProfile>0</ProfitStartClockingProfile>
  <ProfitStartClockingProfileType>Single</ProfitStartClockingProfileType>
  <ProfitUseStopClockingProfile>false</ProfitUseStopClockingProfile>
  <ProfitStopClockingProfile>0</ProfitStopClockingProfile>
  <ProfitStopClockingProfileType>Single</ProfitStopClockingProfileType>
  <ExpectedDeviceCount>1</ExpectedDeviceCount>
</ManagedMiner>

I see zero errors in phoeniexminer

[MoparMiningLLC]

anyone using an innosilicon A6 LTCMaster? I cannot get AM to read that it is even on my network.

edit: I finally got it to see it - it was the port, it wasnt searching port 8100

So, then I got it added but the API access is denied.

I tried the instructions of using telnet but cant get past a certain point - I can get up to where it tells me to edit the config but when I run the command provided the config does not open for me to edit.

Let me state this - this is my first Innosilicon miner.

[Marvell2]

yet another issue

trying a new pool Ziliqua and Etheruem

PhoenixMiner.exe -pool stratum1+tcp://eu.ezil.me:5555 -proto 2 -wal 0xa57EeFabb76Bfd1E9E6ee606999b76BD123aFe32.zil1lnren9q53zp4a3rr6zx4f3p53v3nuyq0 qgey5f -worker WORKER


thats the - wal address

Awesomeminer for some reason removes the seccond part  zil1lnren9q53zp4a3rr6zx4f3p53v3nuyq0qgey5f   from the address so i cannot connect to the pool.  Why won't the miner just respect the full wallet address i placed in the wallet

why is it stripping out and using just the 0xa57EeFabb76Bfd1E9E6ee606999b76BD123aFe32 ? and how do i disable that ?  I tried removing it completely and  adding -wal 0xa57EeFabb76Bfd1E9E6ee606999b76BD123aFe32.zil1lnren9q53zp4a3rr6zx4f3p53v3nuyq0 qgey5f
as a command line option and now nothing is used.

[NCarter84]

yet another issue

trying a new pool Ziliqua and Etheruem

PhoenixMiner.exe -pool stratum1+tcp://eu.ezil.me:5555 -proto 2 -wal 0xa57EeFabb76Bfd1E9E6ee606999b76BD123aFe32.zil1lnren9q53zp4a3rr6zx4f3p53v3nuyq0 qgey5f -worker WORKER


thats the - wal address

Awesomeminer for some reason removes the seccond part  zil1lnren9q53zp4a3rr6zx4f3p53v3nuyq0qgey5f   from the address so i cannot connect to the pool.  Why won't the miner just respect the full wallet address i placed in the wallet

why is it stripping out and using just the 0xa57EeFabb76Bfd1E9E6ee606999b76BD123aFe32 ? and how do i disable that ?  I tried removing it completely and  adding -wal 0xa57EeFabb76Bfd1E9E6ee606999b76BD123aFe32.zil1lnren9q53zp4a3rr6zx4f3p53v3nuyq0 qgey5f
as a command line option and now nothing is used.

Mine works fine... But, I use Team Red Miner over that phoney Phoenix miner.

[Marvell2]

yet another issue

trying a new pool Ziliqua and Etheruem

PhoenixMiner.exe -pool stratum1+tcp://eu.ezil.me:5555 -proto 2 -wal 0xa57EeFabb76Bfd1E9E6ee606999b76BD123aFe32.zil1lnren9q53zp4a3rr6zx4f3p53v3nuyq0 qgey5f -worker WORKER


thats the - wal address

Awesomeminer for some reason removes the seccond part  zil1lnren9q53zp4a3rr6zx4f3p53v3nuyq0qgey5f   from the address so i cannot connect to the pool.  Why won't the miner just respect the full wallet address i placed in the wallet

why is it stripping out and using just the 0xa57EeFabb76Bfd1E9E6ee606999b76BD123aFe32 ? and how do i disable that ?  I tried removing it completely and  adding -wal 0xa57EeFabb76Bfd1E9E6ee606999b76BD123aFe32.zil1lnren9q53zp4a3rr6zx4f3p53v3nuyq0 qgey5f
as a command line option and now nothing is used.

Mine works fine... But, I use Team Red Miner over that phoney Phoenix miner.

you put the whole wallet address in the account textbox?

[patrike]

How to show correct price for BEAM? Coin tab shows Revenue $21,779. Coin properties appear to be correct.

When I'm looking at Beam from WhatToMine right now, it looks fine and a hashrate of 50H/s gives ~$2.7/day. Are you using all default values in the Coin Properties? Do you still experience this issue or was it only temporary?

In the 'Miners' Tab BEAM coin shows $0.00 per day

In the 'Coins' Tab BEAM is at the top of the list when sorting by Revenue at $961,115 and using the Default Coin Properties values:

Difficulty: 26,530,270.00
Block reward:  40.0
Exchange rate: 0.00003320 BTC
Block time 60 s
Calculation: Difficulty, Block reward and Block time

What is the hashrate you configured (Profile hashrate)?
Please also select Beam on the Coins tab, right click and select "Open calculator on WhatToMine.com". This will make it possible to compare the revenue calculators.

[patrike]

why do i get mining interface offline when the card is mining and awesomeminer agent is running?  its happening now on phoeniexminer

"Interface offline" indicates that Awesome Miner doesn't get any monitoring information from the mining software. Can you please select the miner and send me the API report (toolbar: Tools -> API Report), and I can verify if Phoenix Miner is giving any updates.

Do you see any error messages in the Phoenix Miner window when it's starting?

thats the api report

Version: 7.8.4 (40)
API command: miner_getstat2


I see zero errors in phoeniexminer

Thanks for the details. This indicates PhoenixMiner doesn't respond anything to the monitoring requests.

I don't have any solution to this, but based on previous experience it might make sense to check if this issue only happens when you run the mining with many mining devices. Do you get the same issue if you start Phoenix Miner with a single GPU?

[patrike]

anyone using an innosilicon A6 LTCMaster? I cannot get AM to read that it is even on my network.

edit: I finally got it to see it - it was the port, it wasnt searching port 8100

So, then I got it added but the API access is denied.

I tried the instructions of using telnet but cant get past a certain point - I can get up to where it tells me to edit the config but when I run the command provided the config does not open for me to edit.

Let me state this - this is my first Innosilicon miner.

I don't have too much experience with Innosilicon miners. What you need to do is to use a file editor available on the Linux system on the miner. Unfortunately only 'vi' is available as far as I know and that one is a bit complicated.
Run:
vi /home/inno_py/inno_config.py
You will have to press the 'i' key to be able to make modifications to the file after you opened it. Once you made the changes, you need to press 'ESC' followed by ':wq' (as in Write and Quit).

[MoparMiningLLC]

anyone using an innosilicon A6 LTCMaster? I cannot get AM to read that it is even on my network.

edit: I finally got it to see it - it was the port, it wasnt searching port 8100

So, then I got it added but the API access is denied.

I tried the instructions of using telnet but cant get past a certain point - I can get up to where it tells me to edit the config but when I run the command provided the config does not open for me to edit.

Let me state this - this is my first Innosilicon miner.

I don't have too much experience with Innosilicon miners. What you need to do is to use a file editor available on the Linux system on the miner. Unfortunately only 'vi' is available as far as I know and that one is a bit complicated.
Run:
vi /home/inno_py/inno_config.py
You will have to press the 'i' key to be able to make modifications to the file after you opened it. Once you made the changes, you need to press 'ESC' followed by ':wq' (as in Write and Quit).

yea this is my first innosilicon miner

i tried to follow the instructions you had on the website - just couldnt get past that one part  - it stops at "/home/inno_py/inno_config.py" full text from your site below.

Code:

Make the file system writable:
mount / -o rw,remount
Edit the three highlighted lines in the file below, where "--api-listen" is replaced with "--api-listen --api-network --api-allow W:0/0"
/home/inno_py/inno_config.py
gInnoInitCmdStr = 'innominer_%s -o %s -u %s -p %s --A1Pll1 %s --A1Pll2 %s --A1Pll3 %s --A1Pll4 %s --A1Vol %s --api-listen --api-network --api-allow W:0/0 > /dev/null 2>&1'
gInnoBtcName    = 'T1'
gInnoBtcPool    = 'stratum+tcp://btc.s.innomining.com:1800'
gInnoBtcUser    = 'inno.btc'
gInnoBtcPwd     = 'x'
gInnoBtcFreq    = 1332
gInnoBtcVid     = 10
gInnoInitBtcCmd = gInnoInitCmdStr % (gInnoBtcName, gInnoBtcPool, gInnoBtcUser, gInnoBtcPwd, gInnoBtcFreq, gInnoBtcFreq, gInnoBtcFreq, gInnoBtcFreq, gInnoBtcVid)
gInnoLtcName    = 'T2'
gInnoLtcPool    = 'stratum+tcp://ltc.s.innomining.com:1900'
gInnoLtcUser    = 'inno.ltc'
gInnoLtcPwd     = 'x'
gInnoLtcFreq    = 1044
gInnoLtcVid     = 25
gInnoInitLtcCmd = gInnoInitCmdStr % (gInnoLtcName, gInnoLtcPool, gInnoLtcUser, gInnoLtcPwd, gInnoLtcFreq, gInnoLtcFreq, gInnoLtcFreq, gInnoLtcFreq, gInnoLtcVid)
gInnoDashName   = 'T3'
gInnoDashPool   = 'stratum+tcp://dash.s.innomining.com:2000'
gInnoDashUser   = 'inno.dash'
gInnoDashPwd    = 'x'
gInnoDashFreq   = 1100
gInnoDashVid    = 12
gInnoInitDashCmd= gInnoInitCmdStr % (gInnoDashName, gInnoDashPool, gInnoDashUser, gInnoDashPwd, gInnoDashFreq, gInnoDashFreq, gInnoDashFreq, gInnoDashFreq, gInnoDashVid)
gInnoXmrName    = 'T4'
gInnoXmrPool    = 'stratum+tcp://a8.s.innomining.com:19333'
gInnoXmrUser    = 'inno.001'
gInnoXmrPwd     = 'x'
gInnoXmrFreq    = 1000
gInnoXmrVid     = 175
gInnoInitXmrCmd = gInnoInitCmdStr % (gInnoXmrName, gInnoXmrPool, gInnoXmrUser, gInnoXmrPwd, gInnoXmrFreq, gInnoXmrFreq, gInnoXmrFreq, gInnoXmrFreq, gInnoXmrVid)
gInnoCmd1Pool   = gInnoInitCmdStr
gInnoCmd2Pool   = 'innominer_%s -o %s -u %s -p %s -o %s -u %s -p %s --A1Pll1 %s --A1Pll2 %s --A1Pll3 %s --A1Pll4 %s --A1Vol %s --api-listen --api-network --api-allow W:0/0 >/dev/null 2>&1'
gInnoCmd3Pool   = 'innominer_%s -o %s -u %s -p %s -o %s -u %s -p %s -o %s -u %s -p %s --A1Pll1 %s --A1Pll2 %s --A1Pll3 %s --A1Pll4 %s --A1Vol %s --api-listen --api-network --api-allow W:0/0 >/dev/null 2>&1'
    
                    
Reboot the miner

[patrike]

anyone using an innosilicon A6 LTCMaster? I cannot get AM to read that it is even on my network.

edit: I finally got it to see it - it was the port, it wasnt searching port 8100

So, then I got it added but the API access is denied.

I tried the instructions of using telnet but cant get past a certain point - I can get up to where it tells me to edit the config but when I run the command provided the config does not open for me to edit.

Let me state this - this is my first Innosilicon miner.

I don't have too much experience with Innosilicon miners. What you need to do is to use a file editor available on the Linux system on the miner. Unfortunately only 'vi' is available as far as I know and that one is a bit complicated.
Run:
vi /home/inno_py/inno_config.py
You will have to press the 'i' key to be able to make modifications to the file after you opened it. Once you made the changes, you need to press 'ESC' followed by ':wq' (as in Write and Quit).

i tried to follow the instructions you had on the website - just couldnt get past that one part  - it stops at "/home/inno_py/inno_config.py" full text from your site below.

Code:

Make the file system writable:
mount / -o rw,remount
Edit the three highlighted lines in the file below, where "--api-listen" is replaced with "--api-listen --api-network --api-allow W:0/0"
/home/inno_py/inno_config.py
gInnoInitCmdStr = 'innominer_%s -o %s -u %s -p %s --A1Pll1 %s --A1Pll2 %s --A1Pll3 %s --A1Pll4 %s --A1Vol %s --api-listen --api-network --api-allow W:0/0 > /dev/null 2>&1'
gInnoBtcName    = 'T1'
gInnoBtcPool    = 'stratum+tcp://btc.s.innomining.com:1800'
gInnoBtcUser    = 'inno.btc'
gInnoBtcPwd     = 'x'
gInnoBtcFreq    = 1332
gInnoBtcVid     = 10
gInnoInitBtcCmd = gInnoInitCmdStr % (gInnoBtcName, gInnoBtcPool, gInnoBtcUser, gInnoBtcPwd, gInnoBtcFreq, gInnoBtcFreq, gInnoBtcFreq, gInnoBtcFreq, gInnoBtcVid)
gInnoLtcName    = 'T2'
gInnoLtcPool    = 'stratum+tcp://ltc.s.innomining.com:1900'
gInnoLtcUser    = 'inno.ltc'
gInnoLtcPwd     = 'x'
gInnoLtcFreq    = 1044
gInnoLtcVid     = 25
gInnoInitLtcCmd = gInnoInitCmdStr % (gInnoLtcName, gInnoLtcPool, gInnoLtcUser, gInnoLtcPwd, gInnoLtcFreq, gInnoLtcFreq, gInnoLtcFreq, gInnoLtcFreq, gInnoLtcVid)
gInnoDashName   = 'T3'
gInnoDashPool   = 'stratum+tcp://dash.s.innomining.com:2000'
gInnoDashUser   = 'inno.dash'
gInnoDashPwd    = 'x'
gInnoDashFreq   = 1100
gInnoDashVid    = 12
gInnoInitDashCmd= gInnoInitCmdStr % (gInnoDashName, gInnoDashPool, gInnoDashUser, gInnoDashPwd, gInnoDashFreq, gInnoDashFreq, gInnoDashFreq, gInnoDashFreq, gInnoDashVid)
gInnoXmrName    = 'T4'
gInnoXmrPool    = 'stratum+tcp://a8.s.innomining.com:19333'
gInnoXmrUser    = 'inno.001'
gInnoXmrPwd     = 'x'
gInnoXmrFreq    = 1000
gInnoXmrVid     = 175
gInnoInitXmrCmd = gInnoInitCmdStr % (gInnoXmrName, gInnoXmrPool, gInnoXmrUser, gInnoXmrPwd, gInnoXmrFreq, gInnoXmrFreq, gInnoXmrFreq, gInnoXmrFreq, gInnoXmrVid)
gInnoCmd1Pool   = gInnoInitCmdStr
gInnoCmd2Pool   = 'innominer_%s -o %s -u %s -p %s -o %s -u %s -p %s --A1Pll1 %s --A1Pll2 %s --A1Pll3 %s --A1Pll4 %s --A1Vol %s --api-listen --api-network --api-allow W:0/0 >/dev/null 2>&1'
gInnoCmd3Pool   = 'innominer_%s -o %s -u %s -p %s -o %s -u %s -p %s -o %s -u %s -p %s --A1Pll1 %s --A1Pll2 %s --A1Pll3 %s --A1Pll4 %s --A1Vol %s --api-listen --api-network --api-allow W:0/0 >/dev/null 2>&1'
    
                    
Reboot the miner

The instructions on the web site says that you need to edit the file '/home/inno_py/inno_config.py', but it didn't specifically tell how to do it. This is why you need to use the 'vi' command to edit the file.

[MoparMiningLLC]

The instructions on the web site says that you need to edit the configuration file, but it didn't specifically tell how to do it. This is why you need to use the 'vi' command to edit the file.

will try it out - just hopefully not brick my miner.

[patrike]

The instructions on the web site says that you need to edit the configuration file, but it didn't specifically tell how to do it. This is why you need to use the 'vi' command to edit the file.

will try it out - just hopefully not brick my miner.

You can make a copy of the original configuration file. Make a copy using:
cp /home/inno_py/inno_config.py /home/inno_py/inno_config.backup