[Awesome Miner] - Powerful Windows GUI to manage and monitor up to 200000 miners

[No.0B]

As I said let's assume merged mining total profit as 1 = 50%+50%  ... but currently software count's only 1st coin profit ( 50 % ) as base profit in profit switching ignoring second coin's 50 %.
In merged mining profit is almost close to double comparing mining single coin.
Like if algo is same for 2 coins and pool supoorts them and offers to mine both coins at same time (Merged mining ) .

Instead of mining separately both coins and wasting power.. we get double reward for same hashrate and power in merged mining. resulted in increased profits significantly

with single coin mining it is expecting to get 0.088$ but with merged mining profits increased to 0.77$
8 times more...  I think  now it is clear why I am requesting a fix for this

Pure nonsense. Right now at zergpool it's LTC .054 + Doge .033 = .087 merged. as expected.

you are talking about only 2 coin LTC and DOGE.. and only pool... may be you only know this 2 only
but I already said there are some other coins are available

and before talking anybullshit here..
please read msg carefully before .... check SS before replying stupidly.
 you will see the difference and get an idea about what I am talking...

[patrike]

Is it possible to setup qubic mining with awesome miner?  I can get it to run generically, but it doesn't show hash rate or power consumption.  

I was going to ask too I'm glad some else did .
Here is two pools that you can share on and don't have to solo mine on.

if it helps any because you have to use the software miner for that pool mining Qubic.

https://www.apool.io/
Software Miner : https://github.com/apool-io/apoolminer/releases/tag/v1.3.2?download

https://qubic.ninja/
Software miner: https://qubic.ninja/setup#windows

The Main solo pool .
https://app.qubic.li
Software miners: https://github.com/qubic-li/client?tab=readme-ov-file#download

Thanks for the detailed feedback. So basically each mining pool provides their own unique mining software?

[patrike]

Hello Patrike

There is one problem while using merged mining in profit switching...
it does not take actual pool Revenue/Profit reported to switch between coin.
Example:
I am mining on a merged mining pool...  actual pool profit as it show on description page is 1$ for two coins (0.5$ + 0.5$... assume)  but it switches pool to another 2nd pool with 3rd coin reports profit of 0.65$ which is greater than the 1st coins profit ( 0.5$ ) ..
which is actually a less profitable pool as 1st pool reporting in total 1$ profit with merged mining...
before running profit switch it should consider total profit revenue of merged mining pool.
will you please fix it.

Thanks for the report - I will review this scenario.

[toptek12]

Is it possible to setup qubic mining with awesome miner?  I can get it to run generically, but it doesn't show hash rate or power consumption.  

I was going to ask too I'm glad some else did .
Here is two pools that you can share on and don't have to solo mine on.

if it helps any because you have to use the software miner for that pool mining Qubic.

https://www.apool.io/
Software Miner : https://github.com/apool-io/apoolminer/releases/tag/v1.3.2?download

https://qubic.ninja/
Software miner: https://qubic.ninja/setup#windows

The Main solo pool .
https://app.qubic.li
Software miners: https://github.com/qubic-li/client?tab=readme-ov-file#download

Thanks for the detailed feedback. So basically each mining pool provides their own unique mining software?

YUP and it changes every Wednesday or can .

[Waytoogo]

I tried to add a new address to the Wallet Balance page, and the dollar amount disappeared. This is on the latest Development preview. When I replaced the ConfigData.xml with the latest backup, the dollar amount came back. I was able to edit the ConfigData.xml file and swap an empty address for the new one I wanted to add, in the 2 places I found it, and it works fine.

[patrike]

I tried to add a new address to the Wallet Balance page, and the dollar amount disappeared. This is on the latest Development preview. When I replaced the ConfigData.xml with the latest backup, the dollar amount came back. I was able to edit the ConfigData.xml file and swap an empty address for the new one I wanted to add, in the 2 places I found it, and it works fine.

Thanks for your report
1) Did the USD amount disappear for all addresses or was it only for the new address you added where it didn't show up?
2) Did any of the entries indicate "Update failed" in red text?

[Waytoogo]

I tried to add a new address to the Wallet Balance page, and the dollar amount disappeared. This is on the latest Development preview. When I replaced the ConfigData.xml with the latest backup, the dollar amount came back. I was able to edit the ConfigData.xml file and swap an empty address for the new one I wanted to add, in the 2 places I found it, and it works fine.

Thanks for your report
1) Did the USD amount disappear for all addresses or was it only for the new address you added where it didn't show up?
2) Did any of the entries indicate "Update failed" in red text?

The USD amount disappeared for all addresses. The top header says Balance ($0.00), but the column under it, is totally blank.  The amount of Bitcoin is there for all addresses.
I have 3 sources of internet so I can swap between them when I do get "Update failed", that is not part of the problem.
Thank you for looking into this.

[STSMiner]

@patrike

Feature request
Zpool
Non BTC Wallet address and password override box in Options > Profit Switching  

Please can you add a password override option [box] in the Profit Switching section so that it overrides the default (c=BTC) for all algos under Zpool as it seems that new users and some old users are finding it hard to work out how to change this when they are not using a BTC wallet address for payout, a standard box will do for this where the user just enters the correct ticker and other options (ie Digibyte wallet address - password would be -->> c=DGB,sd=12,rignamehere) for their payout wallet choice, this would then override the default of BTC for all algos within the Zpool algos in Online Services.

This would make it more user friendly / logical, the user would not have to go to the Online Services section to update the password for all algos for Zpool with ref to their payout coin choice (non BTC wallet address) as it's all done in this one place where your entering your wallet address for the coin you want to be paid in.

** Image link removed as this stupid platform don't like the URL - Would help if there was a way to upload images to place in posts / messages ....  SIGH **


Thanks.

[patrike]

I tried to add a new address to the Wallet Balance page, and the dollar amount disappeared. This is on the latest Development preview. When I replaced the ConfigData.xml with the latest backup, the dollar amount came back. I was able to edit the ConfigData.xml file and swap an empty address for the new one I wanted to add, in the 2 places I found it, and it works fine.

Thanks for your report
1) Did the USD amount disappear for all addresses or was it only for the new address you added where it didn't show up?
2) Did any of the entries indicate "Update failed" in red text?

The USD amount disappeared for all addresses. The top header says Balance ($0.00), but the column under it, is totally blank.  The amount of Bitcoin is there for all addresses.
I have 3 sources of internet so I can swap between them when I do get "Update failed", that is not part of the problem.
Thank you for looking into this.

May I request a copy of the Awesome Miner log file for this scenario? I'm not able to reproduce the issue with the blank balance display. You can collect the log file via the toolbar Tools -> Log File. You can send the file via the web site form:
https://www.awesomeminer.com/contact

[patrike]

Awesome Miner version 9.13.5 (Development preview of 10.0)

 ASIC mining
  - Added support for Antminers running the LuxOS firmware
 User interface
  - Improvements to the heat map
 Corrections
  - Correction to saving toolbar buttons to the quick access toolbar
  - Correction to setting mining profile on the Awesome Miner Antminer firmware
  - Correction to updating pools via the Managed Miner Properties

[slysir]

Today i updated to 9.13.5 and notice the local web server now requires username and password. Where to set these fields?

[patrike]

Today i updated to 9.13.5 and notice the local web server now requires username and password. Where to set these fields?

We do enforce authentication from now on. Please go to the Options dialog, Security section. By default you have the "admin" account you can sign in with.

[patrike]

Awesome Miner version 9.13.6 (Development preview of 10.0)

 Features
  - New trigger to detect curtailment state
  - Improve ASIC miner rule actions for Pause and Resume to allow configuration of delay per miner and delay per batch of miners
 User interface
  - Move ASIC Tools to the Main toolbar (previously located in the Tools toolbar)
  - Make ASIC operations for Pause, Resume and Default Pools operations available via the Main toolbar
Corrections
 - Correction to miner tags when being applied to many miners at once
 - Corrections to heat map
 - Correction to list of algorithms not being saved correctly
 - Correction to C# scripting feature

[patrike]

Awesome Miner version 9.13.7 (Development preview of 10.0)

 ASIC mining
  - BraiinsOS+ integration improved with supporting operation to decrement the power usage by a specified amount. Also exposed via rule actions.
 Features
  - Support running multiple instances of the Awesome Miner client, connecting to multiple Awesome Miner servers from a single computer
  - Added more flexible trigger conditions for curtailment rules
  - Log file management in Client/Server deployments
 Corrections
  - Correction to display of a larger number of miner tags when assigning to miners

[patrike]

Awesome Miner version 10.0

 ASIC mining
  - Improved BraiinsOS+ integration. Reboot, set default pools, LED flash, pause/resume mining and set target power level. Listed as a separate firmware, configured for each External Miner in the ASIC hardware/firmware field.
  - Added support for Antminers running the LuxOS firmware
  - Remote Proxy for Raspberry Pi adds support for 64-bit Raspberry Pi OS, in addition to 32-bit
  - Introducing Paused state display in the Awesome Miner user interface - to indicate if an Antminer is currently in paused/sleep mode. To enable paused state detection, see the Options dialog, Mining Settings section, Extended monitoring.
  - Display of serial number for Antminer (currently only supported by a few Antminers)
  - Read Environment Temperature for Whatsminer
  - Avalon integration updated to make us of the total power usage if reported
 Awesome Miner Antminer firmware
  - Full support for installing on Cvitek control boards
  - Configuration of hotel fee via Awesome Miner
 GPU mining
  - Managed Software: Configuration adds support for configuration of dual mining algorithms
  - Managed Software: Improve usability by allowing bulk enable and disable for all algorithms
 Features
  - Client/Server concept where multiple Awesome Miner clients can manage a single Awesome Miner server. See Options dialog, Application Services section.
  - Power curtailment to automatically pause or resume ASIC miners based on electricity price - including integration with a number of providers
  - Rules: New trigger to detect curtailment state
  - Rules: Improve ASIC miner rule actions for Pause and Resume to allow configuration of delay per miner and delay per batch of miners
  - Automatic discovery for ASIC miners can be configured to detect a specific ASIC type based on IP address range
  - Network scan: When looking for new miners, existing disabled miners can be ignored from matching with new miners
  - HTTP API for management of Miner Groups
 User interface
  - Updated user interface to give a more modern look. Color scheme can be configured via the Options dialog, Appearance section
  - Improved dark mode
  - New section 'Application services' in the Options dialog, including all settings related to application mode, web server and HTTP API
  - Heat map: Updated look & feel
  - Heat map: Configurable to count rows from top or from bottom
  - Heat map: View to display worker name
  - Move ASIC Tools to the Main toolbar (previously located in the Tools toolbar)
  - Make ASIC operations for Pause, Resume and Default Pools operations available via the Main toolbar
  - Provide user interface feedback when performing miner operations where no dialogs are displayed
 Changes
  - Web server must always use multi-user security. Running without authentication is no longer possible
 Corrections
  - Correction to setting mining profile on the Awesome Miner Antminer firmware

[patrike]

Awesome Miner version 10.0.1

 Features
  - Miner Property trigger improved to support conditions based on the ASIC hardware / firmware and mining software
  - New tab to show upcoming and active curtailments from supported providers
 Corrections
  - Correction to drag and drop of mining groups
  - Correction to PPM integration

[somaton]

after 10.0.0 online services became problematic. If you leave that list open for few hours, it will autoscroll down and if you want to scroll it back to top like it was always with previous versions, you have to use mouse scroll or "page up" key, for example "home" key is doing nothing, ideally it should scroll services list to top without use "page up" key.

[amires]

Hi,

Since v10.0 bulk editing of online services is broken and not working anymore. May I kindly ask developers
of Awesome miner to look into this. Thank you in advance.

[patrike]

after 10.0.0 online services became problematic. If you leave that list open for few hours, it will autoscroll down and if you want to scroll it back to top like it was always with previous versions, you have to use mouse scroll or "page up" key, for example "home" key is doing nothing, ideally it should scroll services list to top without use "page up" key.

Thanks for the report. We will make a correction for this scenario.

[patrike]

Hi,

Since v10.0 bulk editing of online services is broken and not working anymore. May I kindly ask developers
of Awesome miner to look into this. Thank you in advance.

Hi and thanks for the report. This will be corrected in the next release.