★[ANN] [NAV] NAV COIN - Community Fund Live!!!

[Sjacmur]

working few times for 2-3 hours without any connection always was 0.

Use this addndoes:

addnode=95.183.51.15
addnode=5.230.145.133
addnode=95.183.53.184
addnode=95.183.50.54

regards

after 3 hours still 0 connection with this addnone in config.

[1715118671]

1715118671

[1715118671]

1715118671

[1715118671]

1715118671

[1715118671]

1715118671

[1715118671]

1715118671

[bitwho]

working few times for 2-3 hours without any connection always was 0.

Use this addndoes:

addnode=95.183.51.15
addnode=5.230.145.133
addnode=95.183.53.184
addnode=95.183.50.54

regards

after 3 hours still 0 connection with this addnone in config.

have you opened the port in your firewalls?

try this. to any one having hard time synching. use a port between 9000-9999

make sure that port is not being used by an other coin wallet currently open.

good luck

edit: i mean you can either try to open the port via your firewall (port-forwarding). or you can use .cong file to set a port bellow 10000. maybe even below 9800. i think some windows firewalls or antivirus automatically block ports above that. Thus use ones that they do not automatically block. do not use anything bellow 8000 as it is probably reserved for hardware or other defaults.

this could help. but it could not. I noticed when i put ports above 10000 i get blocked and i have to manually instruct(for other things non related to NAV)

[Sjacmur]

I dont know how and wchich port
And I dont run other wallet coins so not use other ports.
Just download wallet and run , closed, copy config, now copy more addnodes but always have 0 connection wtf
Its f**** winndows wallet will work for every simple user not after complicated configurate open ports or other shit.
I download and run and dont work. Its shit for me sorry !!!
When I run first time I click on windows firewall accept to run with publick nethwork or something.
Like usual in other wallet and oldest version nav wallet. But 2 days I have 0 connection to nethwork.
You cant avaible make working windows wallet ?

[bitwho]

I dont know how and wchich port
And I dont run other wallet coins so not use other ports.
Just download wallet and run , closed, copy config, now copy more addnodes but always have 0 connection wtf
Its f**** winndows wallet will work for every simple user not after complicated configurate open ports or other shit.
I download and run and dont work. Its shit for me sorry !!!
When I run first time I click on windows firewall accept to run with publick nethwork or something.
Like usual in other wallet and oldest version nav wallet. But 2 days I have 0 connection to nethwork.
You cant avaible make working windows wallet ?

try what i mentioned.

close your Nav wallet completely.

open the config file.  in your config file. where you added the addnodes. change the port into a number between 9000-9999, say 9470

then save and close the .conf file.

then open the wallet and give it 10 -15 mins.

let us know if that works

[hashforce101]

Imagine NAV gets Decentralized next Month. Would you be ready?

[compmaster]

Manual Coin Swap

Dear Nav Community,

Some update on our progress over the last week. The Bittrex Coin Swap went very smoothly. No reported problems from Bittrex, they were happy with how it went and the new block chain appears to be functioning perfectly. In the end we had 47.5 Million coins swapped out of a total of 59 Million! That's a pretty high percentage for the first stage of the swap as we can all agree. We published to as many crypto news sources as we could and we think the word got spread quite well! Thanks for your help spreading the word via social media etc over the last few weeks! We will keep you updated on this figure as the manual swap comes to a close. I would guess that once Poloniex switches over and some of the late comers swap their coins the amount left will be pretty close to the amount we believe is tied up in the dead exchanges.

At this stage we are looking to have the manual swap open for 1 month since we have some delays with Poloniex but we will confirm this. We may even extend it further to make sure no one misses out!

I have modified a version of the old wallet to allow the input of a Nav 2.0 address where we send the new coins to. I have also programmed a NodeJS server to perform the coin swap. This is actually the backbone of what I am porting the anonymous network to use, so this code also counts towards some percentage of the decentralisation work!

Instructions on how to perform the manual swap can be found on our website: http://navcoin.org/upgrade

It's pretty simple, all you need is the latest version of the old Nav Wallet which I've uploaded, a Nav 2.0 wallet address and our swap address which is posted in the instructions.

I don't like to post wallet addresses for official business or direct links in my announcement posts because its easy for someone to quote the post and change it.

Please visit the website for the full instructions!

As for our other projects, we can finally start to move forward again with them. I will resume my weekly updates to keep everyone in the loop!

All the best,
Craig.

47.5 Million coins swapped out of a total of 59 Million!

Leaving 11.1 million to be manually swapped -

The Auto swap occurred around 7th June as above with great success - adding a Month gives us a Deadline of 7th of July

Can we get Polo situation and/or Deadline date announced to the NAV Community would be great.

You can still buy old coins off POLO! 
or the NEW NAV 2.0 coins off Bittrex

We have to assume Cryptsy coins are part of that 11mln (I hope) so basically 6 mln or so unswapped that's pretty good.
(I'm really happy about locking out the Cryptsy coins so their not hanging over our heads ready to drop the second Mr Vern sees fit to dump them.)

I have a NAV paper wallet. So that wallet no longer works and my coins are gone? I hope not

[Sjacmur]

I dont know how and wchich port
And I dont run other wallet coins so not use other ports.
Just download wallet and run , closed, copy config, now copy more addnodes but always have 0 connection wtf
Its f**** winndows wallet will work for every simple user not after complicated configurate open ports or other shit.
I download and run and dont work. Its shit for me sorry !!!
When I run first time I click on windows firewall accept to run with publick nethwork or something.
Like usual in other wallet and oldest version nav wallet. But 2 days I have 0 connection to nethwork.
You cant avaible make working windows wallet ?

try what i mentioned.

close your Nav wallet completely.

open the config file.  in your config file. where you added the addnodes. change the port into a number between 9000-9999, say 9470

then save and close the .conf file.

then open the wallet and give it 10 -15 mins.

let us know if that works

Not working. 2-3 hours and still 0 connection.
I change port in config to 9500. Look:
port=9500
rpcport=44444

I must change rpcport too ?? for what number ? I dont change yet this. Why not working omg.

[bspus]

I have a NAV paper wallet. So that wallet no longer works and my coins are gone? I hope not

Isn't the old network still active for the swap period?
If you can send the NAV to another address you should stil, be able to swap.

Or maybe you can sync a client (old wallet) and import the wallet in it?

[shahim]

I dont know how and wchich port
And I dont run other wallet coins so not use other ports.
Just download wallet and run , closed, copy config, now copy more addnodes but always have 0 connection wtf
Its f**** winndows wallet will work for every simple user not after complicated configurate open ports or other shit.
I download and run and dont work. Its shit for me sorry !!!
When I run first time I click on windows firewall accept to run with publick nethwork or something.
Like usual in other wallet and oldest version nav wallet. But 2 days I have 0 connection to nethwork.
You cant avaible make working windows wallet ?

try what i mentioned.

close your Nav wallet completely.

open the config file.  in your config file. where you added the addnodes. change the port into a number between 9000-9999, say 9470

then save and close the .conf file.

then open the wallet and give it 10 -15 mins.

let us know if that works

Not working. 2-3 hours and still 0 connection.
I change port in config to 9500. Look:
port=9500
rpcport=44444

I must change rpcport too ?? for what number ? I dont change yet this. Why not working omg.

HI,

what is that for a zip you loaded? The 3.5 Zip do not have a conf file in it. Please use this config:

rpcuser=username
rpcpassword=password
rpcallowip=127.0.0.1
rpcport=44444
port=44440
listen=1
daemon=1
server=1
addnode=95.183.51.15
addnode=5.230.145.133
addnode=95.183.53.184
addnode=95.183.50.54

perhaps also post something out of the debug.log, if it is still not working. we have several windows wallets without these problems.

regards
shahim

[shahim]

I have a NAV paper wallet. So that wallet no longer works and my coins are gone? I hope not

Isn't the old network still active for the swap period?
If you can send the NAV to another address you should stil, be able to swap.

Or maybe you can sync a client (old wallet) and import the wallet in it?

correct! You are still able to swap.

regards
shahim

[Sjacmur]

I dont know how and wchich port
And I dont run other wallet coins so not use other ports.
Just download wallet and run , closed, copy config, now copy more addnodes but always have 0 connection wtf
Its f**** winndows wallet will work for every simple user not after complicated configurate open ports or other shit.
I download and run and dont work. Its shit for me sorry !!!
When I run first time I click on windows firewall accept to run with publick nethwork or something.
Like usual in other wallet and oldest version nav wallet. But 2 days I have 0 connection to nethwork.
You cant avaible make working windows wallet ?

try what i mentioned.

close your Nav wallet completely.

open the config file.  in your config file. where you added the addnodes. change the port into a number between 9000-9999, say 9470

then save and close the .conf file.

then open the wallet and give it 10 -15 mins.

let us know if that works

Not working. 2-3 hours and still 0 connection.
I change port in config to 9500. Look:
port=9500
rpcport=44444

I must change rpcport too ?? for what number ? I dont change yet this. Why not working omg.

HI,

what is that for a zip you loaded? The 3.5 Zip do not have a conf file in it. Please use this config:

rpcuser=username
rpcpassword=password
rpcallowip=127.0.0.1
rpcport=44444
port=44440
listen=1
daemon=1
server=1
addnode=95.183.51.15
addnode=5.230.145.133
addnode=95.183.53.184
addnode=95.183.50.54

perhaps also post something out of the debug.log, if it is still not working. we have several windows wallets without these problems.

regards
shahim

I downloaded windows wallet new NAV 2.0 version 3.5 name file: NavCoin_3.5.0_Windows_Wallet  from your website: http://www.navcoin.org/downloads
Download yourself and you see in wallet navcoin.conf inside this:

rpcuser=USERNAME
rpcpassword=PASSWORD
rpcallowip=*
listen=1
port=44440
rpcport=44444
server=1
daemon=1
mnconflock=0
addnode=95.183.53.184

So I copy this conf to appdata->roaming like usual. In roaming wallet maked folder: NavCoin2 so I copy this config there.
BUT without config not working and with config not working.
I change port to 9500 like other person sugestion but not help.
And I dont know why "rpcallowip=* "   what is *   I put here from old nav conf 127.0.0.1 but not help too.
If something wrong with this config correct them because is on download on website.
I add again ALL your config and tell after work or not.

[shahim]

hmm k.

Please use this conf:

rpcuser=username
rpcpassword=password
rpcallowip=127.0.0.1
rpcport=44444
port=44440
listen=1
daemon=1
server=1
addnode=95.183.51.15
addnode=5.230.145.133
addnode=95.183.53.184
addnode=95.183.50.54


copy it to "navcoin.conf" . I just tested it and it starts directly to sync.

Sorry for problems you have mate.
 

[Sjacmur]

with this conf I have 1 active connection to nethwork and not started yet synchro but I just turn on wallet with this conf so maybe need some more time (minutes) to more connection and synchronise.
I tell soon if full work.
Thx for helping.

[KryptOre]

Here is a few more addnodes

addnode=1.34.180.245
addnode=104.236.223.182
addnode=14.218.56.146
addnode=14.218.68.15
addnode=155.94.190.189
addnode=175.139.60.22
addnode=175.214.144.141
addnode=176.154.77.92
addnode=185.61.148.209
addnode=2.121.162.167
addnode=2.121.28.222
addnode=2.121.4.181
addnode=2.84.167.61
addnode=208.95.215.81
addnode=212.180.171.44
addnode=213.108.119.84
addnode=217.248.39.11
addnode=217.248.56.246
addnode=45.50.28.121
addnode=45.59.171.33
addnode=73.246.201.74
addnode=73.254.153.254
addnode=73.35.112.73
addnode=84.84.197.176
addnode=86.173.93.180
addnode=91.153.109.149
addnode=95.183.50.54
addnode=95.183.51.15
addnode=95.183.53.184

[Sjacmur]

@ KryptOre

Thx.
After added more addnodes I have 4 connection.


@Shahim

with your config I still was only 1 connection after 3 hours waiting.


So I dont know if I am only have this strenght issue or its something with wallet.

Anyway with 4 connection to nethwork I download only 5 weeks blockchain (from 9 weeks) and already stuck some time and no go forward.
And like usual older windows wallet sometimes wallet dont response (dont know english words I have other language windows).

Now is 3 weeks behind so some progress is but still very slow synchronize and only 4 connection.

Can you checking is all ok with this windows wallet ? I have common and very popular Windows 7 and so many troubles with one wallet.

[Sjacmur]

Your windows wallet is joke.
Second day I lost time and not finish synchro few days block chain. Even with help more addnode .... I have 9 connecion to nethwork and all day lost to synchronize !!!
Its pathethic !!!!! you are serious Devs ??

[smoomrik]

Your windows wallet is joke.
Second day I lost time and not finish synchro few days block chain. Even with help more addnode .... I have 9 connecion to nethwork and all day lost to synchronize !!!
Its pathethic !!!!! you are serious Devs ??

What do you expect from a devs who keep their promises more than 2 years.

[hashforce101]

http://navcoin.org/upgrade

https://bittrex.com/Market/Index?MarketName=BTC-NAV NAV 2.0
https://alcurex.org/index.php/crypto/index NAV 2.0
https://poloniex.com/exchange#btc_nav NAV 1.0
https://www.cryptopia.co.nz/Exchange?market=NAV_BTC NAV 1.0
https://www.cryptsy.com/markets/view/252 Gone for Good and Closed ( Problem Solved )

Use the correct wallet for the correct coin. 

[hennessj]

Your windows wallet is joke.
Second day I lost time and not finish synchro few days block chain. Even with help more addnode .... I have 9 connecion to nethwork and all day lost to synchronize !!!
Its pathethic !!!!! you are serious Devs ??

My wallet works and I'm using Windows 7.

In the 30 years I have been dealing with people and their computer problems I've found that the problem is usually operator error.  That is to say that the user has screwed up.

Save the wallet, remove all traces of the rest of the program, download the correct wallet, and reinstall.

[CryptKeeper]

Your windows wallet is joke.
Second day I lost time and not finish synchro few days block chain. Even with help more addnode .... I have 9 connecion to nethwork and all day lost to synchronize !!!
Its pathethic !!!!! you are serious Devs ??

My wallet works and I'm using Windows 7.

In the 30 years I have been dealing with people and their computer problems I've found that the problem is usually operator error.  That is to say that the user has screwed up.

Save the wallet, remove all traces of the rest of the program, download the correct wallet, and reinstall.

Me too. Have installed and run both wallets on windows 10 without any problems!