hennessj
Member
Offline
Activity: 373
Merit: 10
The World’s First Blockchain Core
|
|
July 28, 2016, 12:11:25 AM |
|
with oryginal port 44440 I have 2 connection to nethwork. nor rising number. now its 8 weeks ago synchro but I had it with 0 conection to nethwork before. I change ALL to your config I copy all. More new addnodes which not saw in link on https://chainz.cryptoid.info/nav/#!network maybe some help more. EDIT: 3 active connections to network 8 weeks behind. EDIT: after another 3 hours I make progress: 5 connection to nethowrk and 7 weeks (not 8 like before) behind. But I need to sleep so turn off. bye. It is not normal to have less connections to the NavCoin network when everyone else is having 7+ connections mate , have you tried a different pc or changed the network that you are currently in or maybe changed your router just to see if it is blocking ports? This seem to be a very specific issue that is prevalent to you mate. Unfortunately sometimes despite all the other factors are in like , there can be issues on the local network you are in that can pose issues to your syncing process. Please do not hesitate to contact us if you need further help with regards to the same.
Warm Regards, ~SoopY~I always have 1-3 connections. My wallet always syncs. My wallet always stakes. And I have never found a reason to care about any of this. But you will need the 'thin wallet' to reach the widest audience. (It has been interesting to watch the development of this coin.)
|
|
|
|
isen
|
|
July 28, 2016, 12:36:11 AM Last edit: July 28, 2016, 12:48:14 AM by isen |
|
I've downloaded the latest version of the wallet,the bootstrap and added the nodes to my navcoin.conf but the syncing process is still very slow and i am stuck at 9 weeks behind.I will close it now and try again tommorow,hope it will be fixed untill then.
|
|
|
|
pakage
|
|
July 28, 2016, 02:12:47 AM |
|
I've downloaded the latest version of the wallet,the bootstrap and added the nodes to my navcoin.conf but the syncing process is still very slow and i am stuck at 9 weeks behind.I will close it now and try again tommorow,hope it will be fixed untill then.
If you are having trouble with the bootstrap.dat file, please try the zipped Nav Coin Blockchain Data from the downloads page: http://www.navcoin.org/downloadsDelete everything in your %APPDATA%/NavCoin2 folder except for your wallet.dat and navcoin.conf and put the extracted contents of this zip in there. It should catch your blockchain up to yesterday but it will still takes some time to sync to current.
|
█ | ████████████████████████████████████ ██████████████████████████████████ ████████████████████████████████ ██████████████████████████████████ ████████████████████████████████████ | █ | NAV COIN ▪ ANONYMOUS SUBCHAIN TRANSACTIONS ▪ NAVCOIN.ORG ▪ BITCOINTALK.ORG |
|
|
|
ranggawulung
|
|
July 28, 2016, 04:47:22 AM |
|
yesterday success sync wallet... but today stuck in 212142 block, 12hours behind
|
|
|
|
isen
|
|
July 28, 2016, 04:56:48 AM |
|
I've downloaded the latest version of the wallet,the bootstrap and added the nodes to my navcoin.conf but the syncing process is still very slow and i am stuck at 9 weeks behind.I will close it now and try again tommorow,hope it will be fixed untill then.
If you are having trouble with the bootstrap.dat file, please try the zipped Nav Coin Blockchain Data from the downloads page: http://www.navcoin.org/downloadsDelete everything in your %APPDATA%/NavCoin2 folder except for your wallet.dat and navcoin.conf and put the extracted contents of this zip in there. It should catch your blockchain up to yesterday but it will still takes some time to sync to current. I did exactly what you said and it worked,now i am 32 hours behind i guess that it shouldn't take more than 2-3 hours to synchronize. One more question i have 2 active connections untill now is this normal? thanks
|
|
|
|
djselery
Legendary
Offline
Activity: 1386
Merit: 1001
|
|
July 28, 2016, 05:00:07 AM |
|
|
|
|
|
Affilate User
|
|
July 28, 2016, 05:11:14 AM |
|
my wallet 9 weeks behind
|
|
|
|
|
bspus
Legendary
Offline
Activity: 2165
Merit: 1002
|
|
July 28, 2016, 06:34:49 AM |
|
This is really annoying
The wallet finally synced and I checked it this morning. It had hundreds of stakes, about 5 stakes every minute but all were built on top of each other. Like there are no other nodes on the network to produce blocks.
So even though the older ones they are fully confirmed, I know they can't be real.
It's like the wallet is not communicating to find out about other blocks, eventhough I have loads of connections.
I'll try after a full restart (which I hate to do on my wallet machine) and then the only option is to try on another machine and see what happens
edit:
Have you looked at the block explorer lately? I checked the last 500 blocks and the only address I saw staking was NSeqnrvMtNjtdyggY1HaYZikgnzbwWjwDa wtf is going on?
|
|
|
|
shahim
Legendary
Offline
Activity: 1082
Merit: 1002
|
|
July 28, 2016, 07:13:10 AM Last edit: July 28, 2016, 07:31:40 AM by shahim |
|
This is really annoying
The wallet finally synced and I checked it this morning. It had hundreds of stakes, about 5 stakes every minute but all were built on top of each other. Like there are no other nodes on the network to produce blocks.
So even though the older ones they are fully confirmed, I know they can't be real.
It's like the wallet is not communicating to find out about other blocks, eventhough I have loads of connections.
I'll try after a full restart (which I hate to do on my wallet machine) and then the only option is to try on another machine and see what happens
edit:
Have you looked at the block explorer lately? I checked the last 500 blocks and the only address I saw staking was NSeqnrvMtNjtdyggY1HaYZikgnzbwWjwDa wtf is going on?
what is your block count? Your wallet is on version 3.6.0? What I mean is your blockcount the same like on the explorer? edit: if you on a higher or lower block , you are on some kind of fork. I just updated the Nav-Blockchainzip on the website. Tested it and got instand synced with the new client. I tested sending to bittrex and it worked. My wallet is on the same blockcount like the explorer and since the send to bittrex came through, also on same with them. Same with polo. also that test was fins sending to.
|
|
|
|
shahim
Legendary
Offline
Activity: 1082
Merit: 1002
|
|
July 28, 2016, 07:17:52 AM |
|
I just updted that file. If you like!
|
|
|
|
Ginger Ninja
Sr. Member
Offline
Activity: 373
Merit: 250
They walk among us...
|
|
July 28, 2016, 07:38:27 AM |
|
I "thought" i was ok. But I'm on block 214023? block explorer is behind me
I updated to 3.6 and looking at the richlist it says I haven't updated for 16 hours, yet it has been updated 22 minutes ago. Repair wallet is true.
Am i on the right fork and if not how did i end up on the wrong one by just updating to the new wallet? I also have 12 connections and I'm fully synced and staking.
|
|
|
|
shahim
Legendary
Offline
Activity: 1082
Merit: 1002
|
|
July 28, 2016, 07:46:52 AM |
|
I "thought" i was ok. But I'm on block 214023?
I updated to 3.6 and looking at the richest it says I haven't updated for 16 hours, yet it has been updated 22 minutes ago. Repair wallet is true.
Am i on the right fork and if not how did i end up on the wrong one by just updating to the new wallet? I also have 12 connections and I'm fully synced and staking.
Ok, explorer shows 214009 actually. Seems like you and bspus build up an own chain? ? Please do that: Stop your wallet, go to the %appdata%Navcoin2 folder and delete everything instead navcoin.conf and wallet.dat! Download this blockchain data: http://www.navcoin.org/files/Nav-Blockchain.zip Unpack that to your appdata folder. To be sure, also change your navcoin.conf file and use this one: rpcuser=username rpcpassword=password rpcallowip=127.0.0.1 rpcport=44444 port=44440 listen=1 daemon=1 server=1 maxorphanblocks = 10000 addnode=1.34.180.245 addnode=104.172.24.79 addnode=104.236.223.182 addnode=108.49.230.28 addnode=118.173.189.50 addnode=122.0.19.70 addnode=123.3.30.61 addnode=14.192.212.120 addnode=171.6.249.127 addnode=175.214.144.141 addnode=177.102.227.9 addnode=177.97.160.253 addnode=184.167.180.122 addnode=185.61.148.209 addnode=198.74.56.141 addnode=199.189.131.28 addnode=199.189.131.7 addnode=2.121.16.51 addnode=2.83.95.17 addnode=2.87.179.215 addnode=201.13.110.28 addnode=201.22.82.236 addnode=208.95.215.81 addnode=210.186.127.239 addnode=210.186.96.154 addnode=210.186.98.134 addnode=213.108.119.84 addnode=45.50.28.121 addnode=49.147.108.204 addnode=49.147.97.46 addnode=49.147.97.74 addnode=5.101.213.137 addnode=5.230.146.212 addnode=60.53.28.46 addnode=67.170.67.247 addnode=67.71.48.138 addnode=71.53.154.187 addnode=73.254.153.254 addnode=78.88.29.28 addnode=78.88.29.3 addnode=79.42.236.146 addnode=81.157.241.69 addnode=84.52.229.225 addnode=84.84.197.176 addnode=90.208.175.48 addnode=91.153.109.149 addnode=95.183.50.54 addnode=95.183.51.15 addnode=95.183.52.165 addnode=95.183.53.12 addnode=95.183.53.184 That should fix it. When you start your wallet, go to the debug window and type in : repairwallet (I guess your wallet.dat need to be repaired, because the correct chain will not accept your stakes) If you want to be sure you can also start your wallet with "navcoin-qt.exe -rescan" to let your wallet.dat rescanned. regards shahim ps: it seems more people now staking on the correct chain. I see different addresses.
|
|
|
|
ranggawulung
|
|
July 28, 2016, 07:49:47 AM |
|
I just updted that file. If you like! [/quote] I have update file, but still stuck in block 21242, 12 hours behind please how to fix?
|
|
|
|
shahim
Legendary
Offline
Activity: 1082
Merit: 1002
|
|
July 28, 2016, 07:52:03 AM |
|
No not possible. That blockchain.zip is 30 minutes old now! You have to delete all files except your wallet.dat and navcoin.conf! then unzip that Nav-Blockchain.zip to your Apptdata/Navcoin2 fodler.
12 hours is not possible, because that file is uploaded by me just this morning.
|
|
|
|
ranggawulung
|
|
July 28, 2016, 08:29:52 AM |
|
No not possible. That blockchain.zip is 30 minutes old now! You have to delete all files except your wallet.dat and navcoin.conf! then unzip that Nav-Blockchain.zip to your Apptdata/Navcoin2 fodler.
12 hours is not possible, because that file is uploaded by me just this morning.
success sync after update file http://www.navcoin.org/files/Nav-Blockchain.zip thankyou Dev... good job
|
|
|
|
Ginger Ninja
Sr. Member
Offline
Activity: 373
Merit: 250
They walk among us...
|
|
July 28, 2016, 08:31:03 AM |
|
Thanks Shahim, that seemed to work. Im on the right Block and receiving stakes now.
Gutted I lost all of those stakes though they were huge lol.
Thanks again.
|
|
|
|
shahim
Legendary
Offline
Activity: 1082
Merit: 1002
|
|
July 28, 2016, 08:38:53 AM |
|
Great! Also have you checked, that your blockknumer is the same like hgere : https://chainz.cryptoid.info/nav/ow start staking and earn your stakes Thnx
|
|
|
|
hashforce101
Legendary
Offline
Activity: 1050
Merit: 1000
|
|
July 28, 2016, 08:39:56 AM |
|
This crypto currency looks fantastic! Mobile Wallet is awesome. Great work
|
|
|
|
bspus
Legendary
Offline
Activity: 2165
Merit: 1002
|
|
July 28, 2016, 08:43:06 AM |
|
Thanks Shahim, that seemed to work. Im on the right Block and receiving stakes now.
Gutted I lost all of those stakes though they were huge lol.
Thanks again.
You know what they say. When something seems too good to be true, it probably is! I too seem to be OK now. I synced from a wallet backup (totally clean) with new blockchain. At the end of syncing wallet stopped working but with restart it was fine. Accepts new blocks and my own stake registered on the explorer. So I'm cautiously optimistic BTW, does there exist a command to clean orphans from the transactions list?
|
|
|
|
|