★[ANN] [NAV] NAV COIN - Community Fund Live!!!

[hennessj]

with oryginal port 44440 I have 2 connection to nethwork. nor rising number.
now its 8 weeks ago synchro but I had it with 0 conection to nethwork before.
I change ALL to your config I copy all. More new addnodes which not saw in link on https://chainz.cryptoid.info/nav/#!network maybe some help more.

EDIT: 3 active connections to network 8 weeks behind.

EDIT: after another 3 hours I make progress: 5 connection to nethowrk and 7 weeks (not 8 like before) behind.
But I need to sleep so turn off. bye.

It is not normal to have less connections to the NavCoin network when everyone else is having 7+ connections mate , have you tried a different pc or changed the network that you are currently in or maybe changed your router just to see if it is blocking ports? This seem to be a very specific issue that is prevalent to you mate. Unfortunately sometimes despite all the other factors are in like , there can be issues on the local network you are in that can pose issues to your syncing process. Please do not hesitate to contact us if you need further help with regards to the same.

Warm Regards,
~SoopY~

I always have 1-3 connections.  My wallet always syncs.  My wallet always stakes.  And I have never found a reason to care about any of this.

But you will need the 'thin wallet' to reach the widest audience.

(It has been interesting to watch the development of this coin.)

[isen]

I've downloaded the latest version of the wallet,the bootstrap and added the nodes to my navcoin.conf but the syncing process is still very slow and i am stuck at 9 weeks behind.I will close it now and  try again tommorow,hope it will be fixed untill then.

[pakage]

I've downloaded the latest version of the wallet,the bootstrap and added the nodes to my navcoin.conf but the syncing process is still very slow and i am stuck at 9 weeks behind.I will close it now and  try again tommorow,hope it will be fixed untill then.

If you are having trouble with the bootstrap.dat file, please try the zipped Nav Coin Blockchain Data from the downloads page: http://www.navcoin.org/downloads

Delete everything in your %APPDATA%/NavCoin2 folder except for your wallet.dat and navcoin.conf and put the extracted contents of this zip in there.

It should catch your blockchain up to yesterday but it will still takes some time to sync to current.

[ranggawulung]

yesterday success sync wallet...
but today stuck in 212142 block, 12hours behind  

[isen]

I've downloaded the latest version of the wallet,the bootstrap and added the nodes to my navcoin.conf but the syncing process is still very slow and i am stuck at 9 weeks behind.I will close it now and  try again tommorow,hope it will be fixed untill then.

If you are having trouble with the bootstrap.dat file, please try the zipped Nav Coin Blockchain Data from the downloads page: http://www.navcoin.org/downloads

Delete everything in your %APPDATA%/NavCoin2 folder except for your wallet.dat and navcoin.conf and put the extracted contents of this zip in there.

It should catch your blockchain up to yesterday but it will still takes some time to sync to current.

I did exactly what you said and it worked,now i am 32 hours behind i guess that it shouldn't take more than 2-3 hours to synchronize.
One more question i have 2 active connections untill now is this normal?
thanks

[djselery]

[Affilate User]

my wallet 9 weeks behind

[ranggawulung]

my wallet 9 weeks behind

you must make boostrap (http://www.navajocoin.org/files/Nav-Blockchain.zip) to faster sync
if you make bosstrap sync start 36hours behind
but still stuck in 12 hours behind  

[bspus]

This is really annoying

The wallet finally synced and I checked it this morning. It had hundreds of stakes, about 5 stakes every minute but all were built on top of each other. Like there are no other nodes on the network to produce blocks.

So even though the older ones they are fully confirmed, I know they can't be real.

It's like the wallet is not communicating to find out about other blocks, eventhough I have loads of connections.

I'll try after a full restart (which I hate to do on my wallet machine) and then the only option is to try on another machine and see what happens


edit:

Have you looked at the block explorer lately?
I checked the last 500 blocks and the only address I saw staking was NSeqnrvMtNjtdyggY1HaYZikgnzbwWjwDa
wtf is going on?

[shahim]

This is really annoying

The wallet finally synced and I checked it this morning. It had hundreds of stakes, about 5 stakes every minute but all were built on top of each other. Like there are no other nodes on the network to produce blocks.

So even though the older ones they are fully confirmed, I know they can't be real.

It's like the wallet is not communicating to find out about other blocks, eventhough I have loads of connections.

I'll try after a full restart (which I hate to do on my wallet machine) and then the only option is to try on another machine and see what happens


edit:

Have you looked at the block explorer lately?
I checked the last 500 blocks and the only address I saw staking was NSeqnrvMtNjtdyggY1HaYZikgnzbwWjwDa
wtf is going on?

what is your block count? Your wallet is on version 3.6.0?

What I mean is your blockcount the same like on the explorer?


edit: if you on a higher or lower block , you are on some kind of fork. I just updated the Nav-Blockchainzip on the website. Tested it and got instand synced with the new client.  I tested sending to bittrex and it worked. My wallet is on the same blockcount like the explorer and since the send to bittrex came through, also on same with them. Same with polo. also that test was fins sending to.

[shahim]

my wallet 9 weeks behind

you must make boostrap (http://www.navajocoin.org/files/Nav-Blockchain.zip) to faster sync
if you make bosstrap sync start 36hours behind
but still stuck in 12 hours behind  

I just updted that file. If you like!

[Ginger Ninja]

I "thought" i was ok. But I'm on block 214023? block explorer is behind me

I updated to 3.6 and looking at the richlist it says I haven't updated for 16 hours, yet it has been updated 22 minutes ago. Repair wallet is true.

Am i on the right fork and if not how did i end up on the wrong one by just updating to the new wallet?
I also have 12 connections and I'm fully synced and staking.

[shahim]

I "thought" i was ok. But I'm on block 214023?

I updated to 3.6 and looking at the richest it says I haven't updated for 16 hours, yet it has been updated 22 minutes ago. Repair wallet is true.

Am i on the right fork and if not how did i end up on the wrong one by just updating to the new wallet?
I also have 12 connections and I'm fully synced and staking.

Ok, explorer shows 214009 actually. Seems like you and bspus build up an own chain? ?

Please do that: Stop your wallet, go to the %appdata%Navcoin2 folder and delete everything instead navcoin.conf and wallet.dat! Download this blockchain data: http://www.navcoin.org/files/Nav-Blockchain.zip   

Unpack that to your appdata folder. To be sure, also change your navcoin.conf file and use this one:

rpcuser=username
rpcpassword=password
rpcallowip=127.0.0.1
rpcport=44444
port=44440
listen=1
daemon=1
server=1
maxorphanblocks = 10000
addnode=1.34.180.245
addnode=104.172.24.79
addnode=104.236.223.182
addnode=108.49.230.28
addnode=118.173.189.50
addnode=122.0.19.70
addnode=123.3.30.61
addnode=14.192.212.120
addnode=171.6.249.127
addnode=175.214.144.141
addnode=177.102.227.9
addnode=177.97.160.253
addnode=184.167.180.122
addnode=185.61.148.209
addnode=198.74.56.141
addnode=199.189.131.28
addnode=199.189.131.7
addnode=2.121.16.51
addnode=2.83.95.17
addnode=2.87.179.215
addnode=201.13.110.28
addnode=201.22.82.236
addnode=208.95.215.81
addnode=210.186.127.239
addnode=210.186.96.154
addnode=210.186.98.134
addnode=213.108.119.84
addnode=45.50.28.121
addnode=49.147.108.204
addnode=49.147.97.46
addnode=49.147.97.74
addnode=5.101.213.137
addnode=5.230.146.212
addnode=60.53.28.46
addnode=67.170.67.247
addnode=67.71.48.138
addnode=71.53.154.187
addnode=73.254.153.254
addnode=78.88.29.28
addnode=78.88.29.3
addnode=79.42.236.146
addnode=81.157.241.69
addnode=84.52.229.225
addnode=84.84.197.176
addnode=90.208.175.48
addnode=91.153.109.149
addnode=95.183.50.54
addnode=95.183.51.15
addnode=95.183.52.165
addnode=95.183.53.12
addnode=95.183.53.184

That should fix it. When you start your wallet, go to the debug window and type in : repairwallet  (I guess your wallet.dat need to be repaired, because the correct chain will not accept your stakes) If you want to be sure you can also start your wallet with "navcoin-qt.exe -rescan" to let your wallet.dat rescanned.

regards
shahim

ps: it seems more people now staking on the correct chain. I see different addresses.

[ranggawulung]

my wallet 9 weeks behind

you must make boostrap (http://www.navajocoin.org/files/Nav-Blockchain.zip) to faster sync
if you make bosstrap sync start 36hours behind
but still stuck in 12 hours behind  

I just updted that file. If you like!

[/quote]

I have update file, but still stuck in block 21242, 12 hours behind

please how to fix?

[shahim]

No not possible. That blockchain.zip is 30 minutes old now! You have to delete all files except your wallet.dat and navcoin.conf! then unzip that Nav-Blockchain.zip to your Apptdata/Navcoin2 fodler.

12 hours is not possible, because that file is uploaded by me just this morning.

[ranggawulung]

No not possible. That blockchain.zip is 30 minutes old now! You have to delete all files except your wallet.dat and navcoin.conf! then unzip that Nav-Blockchain.zip to your Apptdata/Navcoin2 fodler.

12 hours is not possible, because that file is uploaded by me just this morning.

success sync after update file http://www.navcoin.org/files/Nav-Blockchain.zip

thankyou Dev... good job 

[Ginger Ninja]

Thanks Shahim, that seemed to work. Im on the right Block and receiving stakes now.

Gutted I lost all of those stakes though they were huge lol.

Thanks again.

[shahim]

Great! Also have you checked, that your blockknumer is the same like hgere : https://chainz.cryptoid.info/nav/

ow start staking and earn your stakes

Thnx

[hashforce101]

This crypto currency looks fantastic!
Mobile Wallet is awesome. Great work

[bspus]

Thanks Shahim, that seemed to work. Im on the right Block and receiving stakes now.

Gutted I lost all of those stakes though they were huge lol.

Thanks again.

You know what they say. When something seems too good to be true, it probably is!

I too seem to be OK now.
I synced from a wallet backup (totally clean) with new blockchain.
At the end of syncing wallet stopped working but with restart it was fine.
Accepts new blocks and my own stake registered on the explorer.

So I'm cautiously optimistic

BTW, does there exist a command to clean orphans from the transactions list?