[ANN] Triangles [TRI] Now Stable & Working Anonymous Cloak over TOR - ON BITTREX

[wurstgelee]

Wurst, PM

Crap should be de-listed.... TRI is not crap.

ok - everyone: current block nr and hash of that block (getblockhash) please.

also peer address if u like.

[wurstgelee]

12:19:17

getblockhash 13732


12:19:17

26f7ee28013ddfa2603965a025d39d4ca80835819e058af7fc97ddb426ef1b01



12:19:54

getpeerinfo


12:19:54

[
{
"addr" : "127.0.0.1:54296",
"services" : "00000001",
"lastsend" : 1409501978,
"lastrecv" : 1409501978,
"conntime" : 1409500885,
"version" : 70203,
"subver" : "/Cheops:3.4.3.1/",
"inbound" : true,
"releasetime" : 0,
"startingheight" : 11801,
"banscore" : 0
},
{
"addr" : "127.0.0.1:54469",
"services" : "00000001",
"lastsend" : 1409501927,
"lastrecv" : 1409501877,
"conntime" : 1409501000,
"version" : 70203,
"subver" : "/Cheops:3.4.3.1/",
"inbound" : true,
"releasetime" : 0,
"startingheight" : 13713,
"banscore" : 0
},
{
"addr" : "127.0.0.1:55039",
"services" : "00000001",
"lastsend" : 1409501961,
"lastrecv" : 1409501961,
"conntime" : 1409501175,
"version" : 70203,
"subver" : "/Cheops:3.4.3.1/",
"inbound" : true,
"releasetime" : 0,
"startingheight" : 11596,
"banscore" : 0
},
{
"addr" : "vg7mkmcbbthtai64.onion:24112",
"services" : "00000001",
"lastsend" : 1409501926,
"lastrecv" : 1409501927,
"conntime" : 1409501300,
"version" : 70203,
"subver" : "/Cheops:3.4.3.1/",
"inbound" : false,
"releasetime" : 0,
"startingheight" : 13716,
"banscore" : 1
},
{
"addr" : "127.0.0.1:55188",
"services" : "00000001",
"lastsend" : 1409501979,
"lastrecv" : 1409501979,
"conntime" : 1409501336,
"version" : 70203,
"subver" : "/Cheops:3.4.3.1/",
"inbound" : true,
"releasetime" : 0,
"startingheight" : 12354,
"banscore" : 0
},
{
"addr" : "127.0.0.1:55917",
"services" : "00000001",
"lastsend" : 1409501928,
"lastrecv" : 1409501928,
"conntime" : 1409501836,
"version" : 70203,
"subver" : "/Cheops:3.4.3.1/",
"inbound" : true,
"releasetime" : 0,
"startingheight" : 13728,
"banscore" : 0
},
{
"addr" : "fksblk3w6n7upske.onion:24112",
"services" : "00000001",
"lastsend" : 1409501928,
"lastrecv" : 1409501928,
"conntime" : 1409501842,
"version" : 70203,
"subver" : "/Cheops:3.4.3.1/",
"inbound" : false,
"releasetime" : 0,
"startingheight" : 13729,
"banscore" : 1
}
]

you are on a broken fork probably. check it by doing the using your own blk0001.dat  as bootstrap (after backup) - does it import to the end of the chain?

[wurstgelee]

OK, i have now 3 nodes including the new 24/7 node on a clean, working chain.

Preparing easy sync instructions now! Hang on a sec!

[StephenJH]

 

[wurstgelee]

Time to bring everyone to the right chain:

If  "getblockhash 12460" in the debug console doesnt give you this output you're not on the right chain: 4df338563eb017db366be9568e9595f8e2b18580fe0d361db4022ad8c6add694.

So, how to get there with a really clean wallet and a really clean blockchain file in a really easy way?

1. In your currently running wallet go to debug console and do a "dumpprivkey <TRIaddress>" for every address you have in the "Receive"-Tab (you can spare those which have no coins and which you dont want to keep.). Note those private keys in some txt file.
2. Close wallet. Rename the %appdata%\roaming\triangles folder and keep it as a backup.
3. Create a new, empty "triangles" folder in %appdata%\roaming. Drop only this bootstrap there, nothing else: https://mega.co.nz/#!RZVDhDia!XHDCWzUpMEzZTkU30ll5zGGIT_peBdj9TvFs3DgmTgs (after you extracted it from the zip archive)
4. Start the wallet (takes a while - it imports the blockchain from bootstrap). Use "-connect=ubxidutptf2sslhq.onion:24112" at first run (Its the 24/7 node which will be the block explorer) and let it sync - you now have the cleanest of all possible wallets and databases.
5. Leave your new, clean wallet connected to that node and do the importprivkey thing with each of your keys you kept in that txt file. "importprivkey <privkey>" in debug console.
6. Let the wallet run that way  (connected to ubxidutptf2sslhq.onion:24112) until most of your acquired coinage is used (simply wait a few mins). After you mined a few blocks close your wallet and start it again (without "-connect=....")

Please do every step as written. Especially the restarting without "-connect" at the end

Now check again:

getblockhash 12460

4df338563eb017db366be9568e9595f8e2b18580fe0d361db4022ad8c6add694


Problems? Tell me.
(brb - 1 to 2 hours)

if you have more than one staking wallet: do one first - wait a few mins - do the 2nd. this way you decrease the risk of creating a "private fork".

[StephenJH]

Time to bring everyone to the right chain:

If  "getblockhash 12460" in the debug console doesnt give you this output you're not on the right chain: 4df338563eb017db366be9568e9595f8e2b18580fe0d361db4022ad8c6add694.

So, how to get there with a really clean wallet and a really clean blockchain file in a really easy way?

1. In your currently running wallet go to debug console and do a "dumpprivkey <TRIaddress>" for every address you have in the "Receive"-Tab (you can spare those which have no coins and which you dont want to keep.). Note those private keys in some txt file.
2. Close wallet. Rename the %appdata%\roaming\triangles folder and keep it as a backup.
3. Create a new, empty "triangles" folder in %appdata%\roaming. Drop only this bootstrap there, nothing else: https://mega.co.nz/#!RZVDhDia!XHDCWzUpMEzZTkU30ll5zGGIT_peBdj9TvFs3DgmTgs (after you extracted it from the zip archive)
4. Start the wallet (takes a while - it imports the blockchain from bootstrap). Use "-connect=ubxidutptf2sslhq.onion:24112" at first run (Its the 24/7 node which will be the block explorer) and let it sync - you now have the cleanest of all possible wallets and databases.
5. Leave your new, clean wallet connected to that node and do the importprivkey thing with each of your keys you kept in that txt file. "importprivkey <privkey>" in debug console.
6. Let the wallet run that way  (connected to ubxidutptf2sslhq.onion:24112) until most of your acquired coinage is used (simply wait a few mins). After you mined a few blocks close your wallet and start it again (without "-connect=....")

Please do every step as written. Especially the restarting without "-connect" at the end

Now check again:

getblockhash 12460

4df338563eb017db366be9568e9595f8e2b18580fe0d361db4022ad8c6add694


Problems? Tell me.
(brb - 1 to 2 hours)

if you have more than one staking wallet: do one first - wait a few mins - do the 2nd. this way you decrease the risk of creating a "private fork".

Worked like a charm.

[NightmareLev8]

Time to bring everyone to the right chain:
...
Problems? Tell me.

Worked like a charm.

Same for me.

[darkmatter7]

Is there currently a mac solution?

[wurstgelee]

Is there currently a mac solution?

NightMareLev8 has a compiled Mac Wallet.

@NightMareLev8? Can u upload the Mac Cheops wallet to mega.co.nz and post the link to the wallet here?


if this works - and it appears to do it - for everyone, i will continue working on the block explorer later that evening.

[NightmareLev8]

Is there currently a mac solution?

NightMareLev8 has a compiled Mac Wallet.

@NightMareLev8? Can u upload the Mac Cheops wallet to mega.co.nz and post the link to the wallet here?

I can, however not until tomorrow. Currently I'm not at home.

[StephenJH]

Looks good to me Wurst...  have 2 synced and staking again. Sent a few @u.

[croTek4]

Updated both wallets 1 at a time to correct chain. Both are good.

[StephenJH]

Time to bring everyone to the right chain:

If  "getblockhash 12460" in the debug console doesnt give you this output you're not on the right chain: 4df338563eb017db366be9568e9595f8e2b18580fe0d361db4022ad8c6add694.

So, how to get there with a really clean wallet and a really clean blockchain file in a really easy way?

1. In your currently running wallet go to debug console and do a "dumpprivkey <TRIaddress>" for every address you have in the "Receive"-Tab (you can spare those which have no coins and which you dont want to keep.). Note those private keys in some txt file. [to see change addresses in your old wallet, use listaddressgroupings in console - pseudo]
2. Close wallet. Rename the %appdata%\roaming\triangles folder and keep it as a backup.
3. Create a new, empty "triangles" folder in %appdata%\roaming. Drop only this bootstrap there, nothing else: https://mega.co.nz/#!RZVDhDia!XHDCWzUpMEzZTkU30ll5zGGIT_peBdj9TvFs3DgmTgs (after you extracted it from the zip archive)
4. Start the wallet (takes a while - it imports the blockchain from bootstrap). Use "-connect=ubxidutptf2sslhq.onion:24112" at first run (Its the 24/7 node which will be the block explorer) and let it sync - you now have the cleanest of all possible wallets and databases.
5. Leave your new, clean wallet connected to that node and do the importprivkey thing with each of your keys you kept in that txt file. "importprivkey <privkey>" in debug console.
6. Let the wallet run that way  (connected to ubxidutptf2sslhq.onion:24112) until most of your acquired coinage is used (simply wait a few mins). After you mined a few blocks close your wallet and start it again (without "-connect=....")

Please do every step as written. Especially the restarting without "-connect" at the end

Now check again:

getblockhash 12460

4df338563eb017db366be9568e9595f8e2b18580fe0d361db4022ad8c6add694


Problems? Tell me.
(brb - 1 to 2 hours)

if you have more than one staking wallet: do one first - wait a few mins - do the 2nd. this way you decrease the risk of creating a "private fork".

Glad you all stuck with this coin. I think it's pretty much the bees knees as is. 3angle had a really good idea and Wurst really saved the day after 3angle fell off the face of the earth. Hope dude is OK.

Anyway,

moneysupply : 49597.51493800

 

[pseudonymdude]

I think it's working.  Also, to see change addresses in your old wallet, use listaddressgroupings in console.  Then dump the private keys for any addresses with coins and import them into your new wallet as wurstgelee described.

[wurstgelee]

Excellent!

Updated schedule for rest of the evening:

1. Food and movie break
2. Resume working on the block explorer
3. Create updated and foolproof all-in-one-and-in-every-case update and install instructions and post them here.

(Possible update with MIN_NODE_MINTING_INTERVAL postponed or maybe canceled - will most likely not be needed. because: 10 connections! A fucking green bar! Also Diff is back up to .001 again after it dropped naturally after we reverted)

Network stability still increasing!

Meanwhile do this in case you face problems:

Time to bring everyone to the right chain:

If  "getblockhash 12460" in the debug console doesnt give you this output you're not on the right chain: 4df338563eb017db366be9568e9595f8e2b18580fe0d361db4022ad8c6add694.

So, how to get there with a really clean wallet and a really clean blockchain file in a really easy way?

1. In your currently running wallet go to debug console and do a "dumpprivkey <TRIaddress>" for every address you have in the "Receive"-Tab (you can spare those which have no coins and which you dont want to keep.). Note those private keys in some txt file.
2. Close wallet. Rename the %appdata%\roaming\triangles folder and keep it as a backup.
3. Create a new, empty "triangles" folder in %appdata%\roaming. Drop only this bootstrap there, nothing else: https://mega.co.nz/#!RZVDhDia!XHDCWzUpMEzZTkU30ll5zGGIT_peBdj9TvFs3DgmTgs (after you extracted it from the zip archive)
4. Start the wallet (takes a while - it imports the blockchain from bootstrap). Use "-connect=ubxidutptf2sslhq.onion:24112" at first run (Its the 24/7 node which will be the block explorer) and let it sync - you now have the cleanest of all possible wallets and databases.
5. Leave your new, clean wallet connected to that node and do the importprivkey thing with each of your keys you kept in that txt file. "importprivkey <privkey>" in debug console.
6. Let the wallet run that way  (connected to ubxidutptf2sslhq.onion:24112) until most of your acquired coinage is used (simply wait a few mins). After you mined a few blocks close your wallet and start it again (without "-connect=....")

Please do every step as written. Especially the restarting without "-connect" at the end

Now check again:

getblockhash 12460

4df338563eb017db366be9568e9595f8e2b18580fe0d361db4022ad8c6add694


Problems? Tell me.
(brb - 1 to 2 hours)

if you have more than one staking wallet: do one first - wait a few mins - do the 2nd. this way you decrease the risk of creating a "private fork".

[wurstgelee]

It's so beautiful!  


edit: No 0.00 reward blocks on that one. Getting these less and less with rising diff.

[StephenJH]

That's one of the coolest green candles I've seen [i'm seeing 11 active :p ]

Great work!

[wurstgelee]

Did anybody say "Block Explorer"?


http://s541732734.online.de:2750


Caution: This is not finished yet - it is work in progress which i simply won't finish today because its late. I just thought you guys might want to know the progress.
Please dont rely an it yet, I will customize it tomorrow.

Same for bittrex - dont reopen the wallet yet please!

Btw: The domain triangles.technology is in the progress of being transfered to my provider, might require a day or two. The block explorer will get a URL like http://explorer.triangles.technology.


Edit: Coins created is wrong by 2 decimals. Nothing serious. Will also be fixed tomorrow.

[pseudonymdude]

Did anybody say "Block Explorer"?


http://s541732734.online.de:2750


Caution: This is not finished yet - it is work in progress which i simply won't finish today because its late. I just thought you guys might want to know the progress.
Please dont rely an it yet, I will customize it tomorrow.

Same for bittrex - dont reopen the wallet yet please!

Btw: The domain triangles.technology is in the progress of being transfered to my provider, might require a day or two. The block explorer will get a URL like http://explorer.triangles.technology.


Edit: Coins created is wrong by 2 decimals. Nothing serious. Will also be fixed tomorrow.

Fantastic!

[StephenJH]