[ANN][BURST] Burst | Efficient HDD Mining | New 1.2.3 Fork block 92000

[MOB]

As for lack of any useful tutorials of how to mine - could someone please tell me how to mine with a pool? Should I create plots on my own? How to do so? Im running poc pool miner yet all Im getting is "no valid shares to submit to pool"

Yes, you have to create plots.  They are what you mine with.

Check the first post and follow the Windows guide to mine.  Each pool also has its own connection guide.  I posted a link to one of the pool pages just above.

[1714137569]

1714137569

[1714137569]

1714137569

[bipben]

What command to use 2 280x for a bat file to use them all ?

anyone ?

read the thread

Miner for multiple graphics dont exist yet. And, few pages back there was a configuration for R9 R280x..

The GPU plot generator v2.0.0 will allow you to do that. I will release it in few hours at most. Be patient

[Patek]

Yes, you have to create plots.  They are what you mine with.
Check the first post and follow the Windows guide to mine.  Each pool also has its own connection guide.  I posted a link to one of the pool pages just above.

So how do I generate plots for pool mining? Do I do it regular way but without pass file inside of the folder? Do I then copy plots to pool miner plots folder?

Also, whats with this No valid shares error?

[maxpayne1256]

Hello,
I wrote a german manual / getting started for burst. You can watch it here: http://www.mku.name/post/burst-coin-mining
I'm happy about every feedback!


Hallo,
da es meines Wissens nach keine deutsche Anleitung für Burst gibt, habe ich unter http://www.mku.name/post/burst-coin-mining ein kleines Tutorial erstellt. Ich freue mich über jegliches Feedback via Forum oder PN!

Hi,

Can you please make an account and post this in the german section? That would be great.
http://burstforum.com/

Thanks

Done!
Would it be possible to add the link on the first page of this topic?

[alexrossi]

What command to use 2 280x for a bat file to use them all ?

anyone ?

read the thread

Miner for multiple graphics dont exist yet. And, few pages back there was a configuration for R9 R280x..

The GPU plot generator v2.0.0 will allow you to do that. I will release it in few hours at most. Be patient

Great! we are all waiting for the release, hope that tomorrow morning when i'll wake up, i'll find download links of the working GPU plotter

[GH]

Maybe someone asked before but then I didn't saw it. I wanna know if there is a source code for a v2 pool?

Asked dev, but didn't respond yet

Same here...

[Dzus1k]

Hey, need an advice before I get mad.

My stupid neighbour taked down electricity when I generated plot. 2.5 / 5.4 tb file.  What should I do now ? I wanna mine that old plot and also generate the new one with im gonna mine in same time as the old one. I dont wanna touch it till i get an advice from pros because generate that plot file took me 4 days.

[soulmann]

What command to use 2 280x for a bat file to use them all ?

anyone ?

read the thread

Miner for multiple graphics dont exist yet. And, few pages back there was a configuration for R9 R280x..

The GPU plot generator v2.0.0 will allow you to do that. I will release it in few hours at most. Be patient

Does it mean double the nonces per minute if I use two identical cards instead of one?

[FruitPolo]

Hey, need an advice before I get mad.

My stupid neighbour taked down electricity when I generated plot. 2.5 / 5.4 tb file.  What should I do now ? I wanna mine that old plot and also generate the new one with im gonna mine in same time as the old one. I dont wanna touch it till i get an advice from pros because generate that plot file took me 4 days.

Working out at what point the last nonces are shouldn't be too difficult. Paste the file name into dcct's plot overlapper thing on the first post and then change the amount of nonces down on the file name until it comes close to the file size currently on the GB size under the paste section. Add quite a few nonces on top of that and then making nonces from that point again.

[Razerglass]

Hey, need an advice before I get mad.

My stupid neighbour taked down electricity when I generated plot. 2.5 / 5.4 tb file.  What should I do now ? I wanna mine that old plot and also generate the new one with im gonna mine in same time as the old one. I dont wanna touch it till i get an advice from pros because generate that plot file took me 4 days.

Working out at what point the last nonces are shouldn't be too difficult. Paste the file name into dcct's plot overlapper thing on the first post and then change the amount of nonces down on the file name until it comes close to the file size currently on the GB size under the paste section. Add quite a few nonces on top of that and then making nonces from that point again.

or instead of punching in numbers and guessing...  

1 nonce = 256KB of space Take your size in bytes and divide it  by 256 and you will have your exact number of plots

EDIT... so looking in windows i have a 102gb file that under size is listed as ... (102,400,000)  divide that by 256...the answer is 400000 that matches to the file name....

13650942247580182448_77100000_400000_5000

[crowetic]

WOW, so all of a sudden, my rackserver will not plot... no matter what. Wont' work with plot.exe, will not work with usual java plotter. It just simply will not plot... I would love some assistance here... I'm getting very frustrated...


The plot.exe just sits there and never gets to the point where it shows how fast it's plotting, etc.


The java plotter gives me this...




can someone help please!!!@!@

bump, can anyone help me figure this out? it's a doozey.

[FruitPolo]

Hey, need an advice before I get mad.

My stupid neighbour taked down electricity when I generated plot. 2.5 / 5.4 tb file.  What should I do now ? I wanna mine that old plot and also generate the new one with im gonna mine in same time as the old one. I dont wanna touch it till i get an advice from pros because generate that plot file took me 4 days.

Working out at what point the last nonces are shouldn't be too difficult. Paste the file name into dcct's plot overlapper thing on the first post and then change the amount of nonces down on the file name until it comes close to the file size currently on the GB size under the paste section. Add quite a few nonces on top of that and then making nonces from that point again.

or instead of punching in numbers and guessing...  

1 plot = 256KB of space Take your size in bytes and divide it  by 256 and you will have your exact number of plots

EDIT... so looking in windows i have a 1.2gb file that under size is listed as ... (102,4000,000)  divide that by 256...the answer is 400000 that matches to the file name....

13650942247580182448_77100000_400000_5000

Yeah, that's an better way than my way. I didn't know the size of an individual plot so I couldn't do it your way.

[Dzus1k]

so okay my file is exactly 2 558 720 000 kB = 9 995 000

what should i do next ? I need to make this file of total 20 800 000

[Razerglass]

Hey, need an advice before I get mad.

My stupid neighbour taked down electricity when I generated plot. 2.5 / 5.4 tb file.  What should I do now ? I wanna mine that old plot and also generate the new one with im gonna mine in same time as the old one. I dont wanna touch it till i get an advice from pros because generate that plot file took me 4 days.

Working out at what point the last nonces are shouldn't be too difficult. Paste the file name into dcct's plot overlapper thing on the first post and then change the amount of nonces down on the file name until it comes close to the file size currently on the GB size under the paste section. Add quite a few nonces on top of that and then making nonces from that point again.

or instead of punching in numbers and guessing...  

1 plot = 256KB of space Take your size in bytes and divide it  by 256 and you will have your exact number of plots

EDIT... so looking in windows i have a 102gb file that under size is listed as ... (102,400,000)  divide that by 256...the answer is 400000 that matches to the file name....

13650942247580182448_77100000_400000_5000

Yeah, that's an better way than my way. I didn't know the size of an individual plot so I couldn't do it your way.

i had to go back and edit some numbers.. but now it is correct hit to many 0's in one spot

[Razerglass]

so okay my file is exactly 2 558 720 000 kB = 9 995 000

what should i do next ? I need to make this file of total 20 800 000

make a new file starting where it ended.. or just start a new set of numbers higher than the one you already used for the remainder.. 10,805,000

[Dzus1k]

so okay my file is exactly 2 558 720 000 kB = 9 995 000

what should i do next ? I need to make this file of total 20 800 000

make a new file starting where it ended.. or just start a new set of numbers higher than the one you already used for the remainder.. 10,805,000

sure how exactly to make that new file with gonna start where I ended ? Im not programmer I dont understand of code.

[Razerglass]

so okay my file is exactly 2 558 720 000 kB = 9 995 000

what should i do next ? I need to make this file of total 20 800 000

make a new file starting where it ended.. or just start a new set of numbers higher than the one you already used for the remainder.. 10,805,000

sure how exactly to make that new file with gonna start where I ended ? Im not programmer I dont understand of code.

copy the file name in question and paste it here ill tell you what to make the next one

[SpeedDemon13]

What command to use 2 280x for a bat file to use them all ?

anyone ?

read the thread

Miner for multiple graphics dont exist yet. And, few pages back there was a configuration for R9 R280x..

The GPU plot generator v2.0.0 will allow you to do that. I will release it in few hours at most. Be patient

Will it be compatible with more cards than just the AMD GCN cards? For me, it works for a HD7730 1GB(2048nonces/min) and HD7970(12288nonce/min). I tried a HD6950 2GB and HD6970, both freeze the system. Would be nice if the was compatible with both AMD and Nvidia. Thanks for all the great work, much appreciated by the community.

[bitminer82]

so okay my file is exactly 2 558 720 000 kB = 9 995 000

what should i do next ? I need to make this file of total 20 800 000

make a new file starting where it ended.. or just start a new set of numbers higher than the one you already used for the remainder.. 10,805,000

sure how exactly to make that new file with gonna start where I ended ? Im not programmer I dont understand of code.

There's also no need to start where it left off, it's just as random no matter what numbers you use.  Just don't have any overlap between the two sets of numbers.  

Did you originally start at 0 or 1 and wanted to go to 20,800,000?  Just start the next plot at 30,000,000 and don't worry about it.  Or start at 300,000,000,000,000 - it's all the same.

[Dzus1k]

so okay my file is exactly 2 558 720 000 kB = 9 995 000

what should i do next ? I need to make this file of total 20 800 000

make a new file starting where it ended.. or just start a new set of numbers higher than the one you already used for the remainder.. 10,805,000

sure how exactly to make that new file with gonna start where I ended ? Im not programmer I dont understand of code.

copy the file name in question and paste it here ill tell you what to make the next one

file name is 3243305246736502377_0_20800000_1000