[ANN][BURST] Burst | Efficient HDD Mining | New 1.2.3 Fork block 92000

[HoldTheLine]

ok I change miner...is that ok?

Much better bro

[1714839464]

1714839464

[1714839464]

1714839464

[1714839464]

1714839464

[1714839464]

1714839464

[THeZoiD]

now what 

[fivebells]

WOOT! 121,000 nonces/minute!

That's awesome!  Can you please run it for a few minutes with the same parameters as the output from a different plotter?

I think something like

Code:

head -c `stat -c%s <n-path>` o-path | diff - <n-path>

should work.  Where o-path is the path to the old output, and n-path is the path to the new.

[Sglasio]

My R9 280x can't work with 4096 stagger size... only with 1024 (((( wtf?

[SpeedDemon13]

I am also getting 'error in step1 kernel launch' with the gpu plotter....

13.12 AMD drivers on 6950, here is my batch...

gpuplotgenerator generate 0 1 G:\SOLOminer\plots (account) 6660999400000 2800000 1000 128 1024

I get the gpu plotter to work on a HD6970, but it slow (500 nonce/min) or it freezes. Stagger at 1024, threads at 64 and hash at 1024 or 512.

Not understanding exactly how the hash command works exactly in relation to plotting, stagger/hashes?

[remulan]

guys burst-pool.cryptoport.io is going to explode !

we got 300+ miners at http://burst-pool.cryptoport.io, network traffic is huge, if we continue like this, more and more nonce submissions are going to be failed due to network lag.

please use alternate pool if you can, and spread the hash power and network trafic, this is completely separate pool, so you need to re-do reward assignment transaction to this pool address, please follow the How-To on site

alternate pool : http://burst-pool2.cryptoport.io

set your reward assignment to 16434009311448803259 (BURST-WBXV-ER87-3JCG-GNC6A)

mining URL :

Code:

http://burst-pool2.cryptoport.io port 8124

or

Code:

http://burst-pool2.cryptoport.io port 80

try to set reward assignment and getting {"errorCode":5,"errorDescription":"Unknown account"}

[SpeedDemon13]

My R9 280x can't work with 4096 stagger size... only with 1024 (((( wtf?

Strange it should work around the range of 2048 to 3072 normally at least.

[taaku]

guys burst-pool.cryptoport.io is going to explode !

we got 300+ miners at http://burst-pool.cryptoport.io, network traffic is huge, if we continue like this, more and more nonce submissions are going to be failed due to network lag.

please use alternate pool if you can, and spread the hash power and network trafic, this is completely separate pool, so you need to re-do reward assignment transaction to this pool address, please follow the How-To on site

alternate pool : http://burst-pool2.cryptoport.io

set your reward assignment to 16434009311448803259 (BURST-WBXV-ER87-3JCG-GNC6A)

mining URL :

Code:

http://burst-pool2.cryptoport.io port 8124

or

Code:

http://burst-pool2.cryptoport.io port 80

try to set reward assignment and getting {"errorCode":5,"errorDescription":"Unknown account"}

you need to have 1 coin in your wallet before doing this..

use faucet to get some coins in your wallet then do the reassign

[HoldTheLine]

I am also getting 'error in step1 kernel launch' with the gpu plotter....

13.12 AMD drivers on 6950, here is my batch...

gpuplotgenerator generate 0 1 G:\SOLOminer\plots (account) 6660999400000 2800000 1000 128 1024

I get the gpu plotter to work on a HD6970, but it slow (500 nonce/min) or it freezes. Stagger at 1024, threads at 64 and hash at 1024 or 512.

Not understanding exactly how the hash command works exactly in relation to plotting, stagger/hashes?

Hey man

This is my setting for a single 7970 GPU - seems to be the fastest/most stable. Higher hashes results in display driver crashing when playing a youtube video. This seems to be a good middleground and is actually a tad faster than higher hash settings.

gpuplotgenerator.exe generate 0 1 plots ACC# (START_AT) (#_OF_NONCES) 2000 64 2040

[yellowduck2]

is it possible to use all GPU to plot ? Right now it only allow 1 device to plot for 1 instance, and 1 instance uses quite a bit of CPU. My rig can only use 2 GPU max. I am using 750 ti.

[HoldTheLine]

is it possible to use all GPU to plot ? Right now it only allow 1 device to plot for 1 instance, and 1 instance uses quite a bit of CPU. My rig can only use 2 GPU max. I am using 750 ti.

Doesn't work. device 1 is fine, device 2 - either working individually or together with device 1 on seperate drives doesn't work when instructions supplied in the Readme are followed.

[BChydro]

is there anything wrong with this?

You are trying to use miner for uray's pool on my pool.

yeah lost 5 days of mining because of uray

lol you lost 5 days of mining because of carelessness. uray is building this community

[twig123]

WOOT! 121,000 nonces/minute!

That's awesome!  Can you please run it for a few minutes with the same parameters as the output from a different plotter?

I think something like

Code:

head -c `stat -c%s <n-path>` o-path | diff - <n-path>

should work.  Where o-path is the path to the old output, and n-path is the path to the new.

Instructions unclear, CD-ROM doesn't work as GPU fan...

Seriously though, I have no idea what you are requesting.
My file should be plotted in a couple hours, so I would be glad to test more stuff if you had directions for me to test.
(I'm a linux n00b that just managed to get things to work  )

[MOB]

It's too bad for everyone involved, but I sure do a lot better when Uray's pool is not working properly!

These long round times are fabulous.

[SpeedDemon13]

I am also getting 'error in step1 kernel launch' with the gpu plotter....

13.12 AMD drivers on 6950, here is my batch...

gpuplotgenerator generate 0 1 G:\SOLOminer\plots (account) 6660999400000 2800000 1000 128 1024

I get the gpu plotter to work on a HD6970, but it slow (500 nonce/min) or it freezes. Stagger at 1024, threads at 64 and hash at 1024 or 512.

Not understanding exactly how the hash command works exactly in relation to plotting, stagger/hashes?

Hey man

This is my setting for a single 7970 GPU - seems to be the fastest/most stable. Higher hashes results in display driver crashing when playing a youtube video. This seems to be a good middleground and is actually a tad faster than higher hash settings.

gpuplotgenerator.exe generate 0 1 plots ACC# (START_AT) (#_OF_NONCES) 2000 64 2040

What nonce/min are you achieving?

[jzhoulon]

Please vote:
https://hitbtc.com/vote
hi, don't forget vote this, even it is not a big exchange, but high vote can cause attention of people and will make it be more popular, and i found that every ip can give a vote every 24 hours, it is not limited, i have use one ip vote 10+ times, in 24 hours you can only vote once with one ip, but after 24 hours, you can still vote

[taaku]

generating files with arguments....400000 800000 1000 4..

but the nounce have crossed 800000 and reached 875000 and still writing...what is wrong?>>>

this is my second file

[AnonymousEconomist]

Can everyone take a moment to tweet to Bittrex for our great coin?

[timk225]

Okay, time for me to bitch aobut this.

I downloaded the GPU Plotter on page 443.  I have WinZip on my computer (Windows 7 64 bit Pro).

When right clicking the files, I can't even get the option to open with WinZip.

So what the hell?  Is this plotter made only for Linux?  How do I open the files to install them?

[SpeedDemon13]

Can everyone take a moment to tweet to Bittrex for our great coin?

I tweet'd them once the wallet update came out and still no response....