[ANN][BURST] Burst | Efficient HDD Mining | New 1.2.3 Fork block 92000

[BurstBurst]

For the past few week, difficulty increase about 15% per day. If we take this into calculation than everyday we will get less share coin per day since more people mining this now.

Well, I'm might need to order more HDD (8-16 more) soon.

[Amph]

For the past few week, difficulty increase about 15% per day. If we take this into calculation than everyday we will get less share coin per day since more people mining this now.

Well, I'm might need to order more HDD (8-16 more) soon.

lol, i don't think the diff will increase regardless, it will stop at some point, unless the price will follow too

[LivsUA]

7000 nonces/min from my r9 280x , it's ok or too small?

My 7970 does 11.5k~11.7k nonces/min, 7970 is about the same as a 280x.

Try 3072 for stagger size, 128 thread and 8160 hashes.

i try, but i have error -61 Buffer cannot create... bla bla bla (((

Try a lower stagger size, maybe 2048.

i try 2048, 3079, 3192, 4096 .... result wich one... -61 error

Maybe reinstall the driver and APP SDK. Use DDU driver cleaner, before reinstalling. Are you using AMD 13.9 driver or 14.x driver? I'm using 13.9 with 2.9.1 APP SDK.

This command line works for me:

gpuPlotGenerator.exe generate 0 0 plots 1097617453xxxxx23 0 1000 4091 128 8160
pause

Drivers. 14.4 or 14.7 ..

[LivsUA]

Can i copy or clone plot files to other HDD (or computers) and use these plot files for mining?

It isn't possible. You have to generate new plots for every hard drive.

You need to have plots without overlaping nonces

so you  generate like this

1x ---> 2x
2.1x---->3x
3.1x--->4x

[jzhoulon]

For the past few week, difficulty increase about 15% per day. If we take this into calculation than everyday we will get less share coin per day since more people mining this now.

Well, I'm might need to order more HDD (8-16 more) soon.

lol, i don't think the diff will increase regardless, it will stop at some point, unless the price will follow too

with more exchange it pushed, more people will know this coin, and more people will mine this...price is nothing, because the cost for mining burst can be ignored. it didn't need huge power supply and with no noise, burst is just free money

[LivsUA]

For the past few week, difficulty increase about 15% per day. If we take this into calculation than everyday we will get less share coin per day since more people mining this now.

Well, I'm might need to order more HDD (8-16 more) soon.

lol, i don't think the diff will increase regardless, it will stop at some point, unless the price will follow too

with more exchange it pushed, more people will know this coin, and more people will mine this...price is nothing, because the cost for mining burst can be ignored. it didn't need huge power supply and with no noise, burst is just free money

Two more weeks and with my 1 TB (separate PC) i would mine zero bursts

[bipben]

Trying the new gpu plotter....



my config...

Code:

gpuPlotGenerator generate 0 0 plots 4163282010088137402 15662000 20480 500 64 128
PAUSE

The error I get says "[-54] Error in step1 kernel launch"  It does this after "Setting OpenCL step3 kernel static arguments"

Any ideas?  Is my config bad, I started with pretty low numbers.  I should also mention I'm plotting on my cpu right now with 4 cores (i2720qm), and have 2/8 gb free.

The -54 is the "CL_INVALID_WORK_GROUP_SIZE" error. It is related to your <threads> parameter. Different values for this parameter may solve your actual problem.

[LivsUA]

Trying the new gpu plotter....



my config...

Code:

gpuPlotGenerator generate 0 0 plots 4163282010088137402 15662000 20480 500 64 128
PAUSE

The error I get says "[-54] Error in step1 kernel launch"  It does this after "Setting OpenCL step3 kernel static arguments"

Any ideas?  Is my config bad, I started with pretty low numbers.  I should also mention I'm plotting on my cpu right now with 4 cores (i2720qm), and have 2/8 gb free.

The -54 is the "CL_INVALID_WORK_GROUP_SIZE" error. It is related to your <threads> parameter. Different values for this parameter may solve your actual problem.

Try this..works for me on 280x

Code:

gpuPlotGenerator.exe generate 0 0 plots 1097617453xxxxx23 0 1000 4091 128 8160
pause

Sorry, i didnt see that you use NVIDIA!! On nvidia it doesnt work, i tried on GT 650, 750...

[jzhoulon]

For the past few week, difficulty increase about 15% per day. If we take this into calculation than everyday we will get less share coin per day since more people mining this now.

Well, I'm might need to order more HDD (8-16 more) soon.

lol, i don't think the diff will increase regardless, it will stop at some point, unless the price will follow too

with more exchange it pushed, more people will know this coin, and more people will mine this...price is nothing, because the cost for mining burst can be ignored. it didn't need huge power supply and with no noise, burst is just free money

Two more weeks and with my 1 TB (separate PC) i would mine zero bursts

impossible, if you join the pool, you can still get far more then 200+burst, diffculty will not raise so much, it is almost 3900TB now ,with 1TB you can get 800 burst a day, if you can get 200 burst a day, then the whole capacity should arrive at 3900*4TB, i don't think within 2 week will arrive this, one week ago, it is 2800-2900 TB, this week increased 1000TB, it is impossible increase 12000TB in two week

[Moonbyte1984]

Anyone solved the problem with backwarded order of transactions in new wallet 1.1.0??

[LivsUA]

For the past few week, difficulty increase about 15% per day. If we take this into calculation than everyday we will get less share coin per day since more people mining this now.

Well, I'm might need to order more HDD (8-16 more) soon.

lol, i don't think the diff will increase regardless, it will stop at some point, unless the price will follow too

with more exchange it pushed, more people will know this coin, and more people will mine this...price is nothing, because the cost for mining burst can be ignored. it didn't need huge power supply and with no noise, burst is just free money

Two more weeks and with my 1 TB (separate PC) i would mine zero bursts

impossible, if you join the pool, you can still get far more then 200+burst, diffculty will not raise so much, it is almost 3900TB now ,with 1TB you can get 800 burst a day, if you can get 200 burst a day, then the whole capacity should arrive at 3900*4TB, i don't think within 2 week will arrive this, one week ago, it is 2800-2900 TB, this week increased 1000TB, it is impossible increase 12000TB in two week

Sorry, it wasnt literarely.. But 200 burst a day its nothing i will buy some, mining for me would be  pointless in few weeks.
I have one question. How do i recognize if i mining on pool V2 (http://burst-pool.cryptoport.io/). I start to mine yesterday and didnt get payed yet. So, maybe my PC is setup wrong or something..

[sponone]

Anyone solved the problem with backwarded order of transactions in new wallet 1.1.0??

Not yet.I  think dev shoul hurry up and resolve the problem ASAP

[bipben]

Okay, after some review, I must conclude that so-called GPU Plotter is a worthless piece of crap, suited only for hackers and code monkeys.

After downloading the 2 files and 7zip, and installing 7zip, the first directions here were to read the README files.  Okay.

And.... progress comes to a halt.  Direction #1 - install msys/mingw.  Installing it isn't the main problem, rather, the bigger problem is that the file ISN'T HERE!!!!!

How the hell am I supposed to install something that isn't in the folder to install?!?!?!?!?

Then after installing OpenCL, which I can do, it gets into modifying files and command line directions for use of the cd command, etc.

Hey, how about releasing a version that WORKS without having to hack / guess / compile the damn thing?

Get to work on it, this current version SUCKS OBAMA!!!!!

And make it for Windows, no more Linux stuff that 1% or less of the world uses!!!!

+1

downloaded & installed msys/mingw from google, but no idea after that !!!!  

In my original post there are two links : the source code for "code monkeys" as you say, and an already pre-build version for windows...
It would be nice of you to pay a bit more attention before being so aggressive.
As you can see from all the posts, the actual plotter is still in an early stage of its development. So yes, the README isn't perfect, and yes there are bugs, but everyone here try to do their best to help each other.

[duncan_idaho]

Hello
I generate plot from nonce 0 to 3276800 with stagger size 1024 and its fine.
Now i want to make my plot file bigger so i generate from plot:

3276800+1024=3277824 to plot 3600000 (3600000*256/1000000=921.6GB) So i generated plot from 838Gb to 921Gb.

Problem is my plot generation dont stop at nonce 3600000 bu is going next above thah value. I had to stopi it manually (ctrl+c) but i don't know why this is going and if everything is fine now ?

[agran]

Vote! https://bter.com/voting#BURST !

Send me pm. I send you macros for autovoiting on bter. It is desirable to have a lot of BTR.

[duncan_idaho]

I have a lot of failed to submit nonce recent

Is there a problem with the Uray pool?

Too many miners and huge network traffic. We need more pools.

[unsoindovo]

I have a lot of failed to submit nonce recent

Is there a problem with the Uray pool?

i switch to Burstcoin V2 pool...

too many unsubmitted shares on http://burst-pool.cryptoport.io/!

i confirm mining is ok on V2 pool!
i'm getting burst!

[tibolt]

+1

v2 pool working good

I have a lot of failed to submit nonce recent

Is there a problem with the Uray pool?

i switch to Burstcoin V2 pool...

too many unsubmitted shares!

i confirm mining is ok on V2 pool!
i'm getting burst!

[uray]

cryptoport is giving to me a lot of these errors, is just me or someone has also noticed it?

same here...

a lot of

Code:

Submitting share
Error: Failed to submit nonce, retrying...
Error: Failed to submit nonce
{"baseTarget":"4287978","height":"11023"

but Uray is not saying anything about!!!

if shares are not submitted we are loosing money!!!
and there are not other pools who work!!!

dude WTF, http://burst-pool2.cryptoport.io
i've been screaming move some to alternate pools ...

[bipben]

Hello
I generate plot from nonce 0 to 3276800 with stagger size 1024 and its fine.
Now i want to make my plot file bigger so i generate from plot:

3276800+1024=3277824 to plot 3600000 (3600000*256/1000000=921.6GB) So i generated plot from 838Gb to 921Gb.

Problem is my plot generation dont stop at nonce 3600000 bu is going next above thah value. I had to stopi it manually (ctrl+c) but i don't know why this is going and if everything is fine now ?

Hi,

It's a display bug: the actual code displays ["currentNonce" / "noncesNumber"] but it should be ["currentNonce - startNonce" / "noncesnumber"]. This bug occurs when <startNonce> is greater than 0.
Sorry for that. I will correct it in the next version. You can use the program without any issue on the generated plots file. The displayed percentage value is correct so use this instead.