[ANN][BURST] Burst | Efficient HDD Mining | New 1.2.3 Fork block 92000

[Amph]

is is also possible to mine while the plot files are generated using dcct plotter? I currently have a script running to fill 3TB in 100GB chunks, and I'd like to already use that.
also i made a little mistake in my script, and I have one overlapping nonce for each "block". That does only mean that this is wasted space right? I could live with that I guess:

0-400000
400001-800001
800002-1200001
...

fixed

uray pool with 6 miners? what happened?

[alphateam]

When pool mining, how to back in solo mining?

[Razerglass]

I'm referring to the back line faults in the Java code that allow hackers to basically reroute mining coins to their own wallets.  It's a fairly well known Java fault, but only in this coin mining case is it useful for anything, so I'm not surprised it was never heard of for the most part until now.

Can you please give some citations describing these faults? 

I love how this was clearly ignored for a page and a half. Obviously we dont care about FUD. but i would like to see some a reference as well.

[Crescendoo]

Hi EVERYONE!!!

i read most of this pages and have few questions..

I have 3 PC's with generated plots, on ich one is 600GB plot. I know that exist some SYMLINK or something.. But, how can i mine with this on pool like if i were mining with one PC or with one big capacity ?
Mining on pool V1 now, dont get anything for quite long time

Or how i can effectively use my 3 PC's where on every PC is 600 GB plot ?

THANKS a lot for responses!!!

You need to generate plot on pool address if you are on v1 pool i think. Are you mining on solo plots you generated? If so then you are mining on wrong pool may be that is why you didnt get anything for long time. Change pool and see About 3 pc's separate plot you join the pool from each pc and mine, i dunno if they can be merged and mine like one space.. Or wait for experts to comment, i can be wrong also i dont read all posts here so  

Yes, i have plots genereted for pool V1.

My command line: "C:\Program Files\Java\jre7\bin\java.exe" -Xmx2500m -cp pocminer.jar;lib/*;lib/akka/*;lib/jetty/* pocminer.POCMiner generate NUMBER_ADRESS 5242902 409600 6000 4

And my generated plots looks like this:

NUMBER_ADRESS_2867204_409600_2000

So, to mine on pool V2 i need to "register" on V2 with different wallet on ich PC or.?

And do wallet need to be open/runnig all the time? Or how pool recognize that i send him "share"?

Maybe some kind soul explains how to do it?
THANKS!!!!!

V2 pool works on your solo plot, you just need some settings from pool and edit your miner folder and you ll need poc pool miner. Pool instructions here http://178.62.39.204:8121/ ... Pool miner link must be on OP, please check there.  Yes you need to register with different wallet and mine on pool from each pc for now 

THANKS! I had figured out it few minutes ago Before this post

im on same situatuon as Livus. My mining on v1 pool gives me Low payouts. I want to start working on the v2 pool nad i would like to Ask you guys am i correct with this. So: my plots generated for v1 pool are useless and i need to make simply solo plots. I need new wallet adress (but why?). I dont understand how its gonna work when ill create solo plots. I mean how to do to mine on pool but not solo. I just need to use pool miner with solo plots right ? And od yes how to configure this pool miner to really work on this pool.

[coin1974]

Hi EVERYONE!!!

i read most of this pages and have few questions..

I have 3 PC's with generated plots, on ich one is 600GB plot. I know that exist some SYMLINK or something.. But, how can i mine with this on pool like if i were mining with one PC or with one big capacity ?
Mining on pool V1 now, dont get anything for quite long time

Or how i can effectively use my 3 PC's where on every PC is 600 GB plot ?

THANKS a lot for responses!!!

You need to generate plot on pool address if you are on v1 pool i think. Are you mining on solo plots you generated? If so then you are mining on wrong pool may be that is why you didnt get anything for long time. Change pool and see About 3 pc's separate plot you join the pool from each pc and mine, i dunno if they can be merged and mine like one space.. Or wait for experts to comment, i can be wrong also i dont read all posts here so  

Yes, i have plots genereted for pool V1.

My command line: "C:\Program Files\Java\jre7\bin\java.exe" -Xmx2500m -cp pocminer.jar;lib/*;lib/akka/*;lib/jetty/* pocminer.POCMiner generate NUMBER_ADRESS 5242902 409600 6000 4

And my generated plots looks like this:

NUMBER_ADRESS_2867204_409600_2000

So, to mine on pool V2 i need to "register" on V2 with different wallet on ich PC or.?

And do wallet need to be open/runnig all the time? Or how pool recognize that i send him "share"?

Maybe some kind soul explains how to do it?
THANKS!!!!!

V2 pool works on your solo plot, you just need some settings from pool and edit your miner folder and you ll need poc pool miner. Pool instructions here http://178.62.39.204:8121/ ... Pool miner link must be on OP, please check there.  Yes you need to register with different wallet and mine on pool from each pc for now 

THANKS! I had figured out it few minutes ago Before this post

im on same situatuon as Livus. My mining on v1 pool gives me Low payouts. I want to start working on the v2 pool nad i would like to Ask you guys am i correct with this. So: my plots generated for v1 pool are useless and i need to make simply solo plots. I need new wallet adress (but why?). I dont understand how its gonna work when ill create solo plots. I mean how to do to mine on pool but not solo. I just need to use pool miner with solo plots right ? And od yes how to configure this pool miner to really work on this pool.

Look at the v2 pool guide, you ll see steps by steps guide there. You dont need new wallet, just delete or backup your v1 pool plot and generate solo plots first. For some reason i dont know it only works with solo plot, you will rename or remove your passphrase to work it with that pool. Check there first for other guides and figure out, you can do it just simple steps. 

[LivsUA]

Hi EVERYONE!!!

i read most of this pages and have few questions..

I have 3 PC's with generated plots, on ich one is 600GB plot. I know that exist some SYMLINK or something.. But, how can i mine with this on pool like if i were mining with one PC or with one big capacity ?
Mining on pool V1 now, dont get anything for quite long time

Or how i can effectively use my 3 PC's where on every PC is 600 GB plot ?

THANKS a lot for responses!!!

You need to generate plot on pool address if you are on v1 pool i think. Are you mining on solo plots you generated? If so then you are mining on wrong pool may be that is why you didnt get anything for long time. Change pool and see About 3 pc's separate plot you join the pool from each pc and mine, i dunno if they can be merged and mine like one space.. Or wait for experts to comment, i can be wrong also i dont read all posts here so  

Yes, i have plots genereted for pool V1.

My command line: "C:\Program Files\Java\jre7\bin\java.exe" -Xmx2500m -cp pocminer.jar;lib/*;lib/akka/*;lib/jetty/* pocminer.POCMiner generate NUMBER_ADRESS 5242902 409600 6000 4

And my generated plots looks like this:

NUMBER_ADRESS_2867204_409600_2000

So, to mine on pool V2 i need to "register" on V2 with different wallet on ich PC or.?

And do wallet need to be open/runnig all the time? Or how pool recognize that i send him "share"?

Maybe some kind soul explains how to do it?
THANKS!!!!!

V2 pool works on your solo plot, you just need some settings from pool and edit your miner folder and you ll need poc pool miner. Pool instructions here http://178.62.39.204:8121/ ... Pool miner link must be on OP, please check there.   Yes you need to register with different wallet and mine on pool from each pc for now  

THANKS! I had figured out it few minutes ago Before this post

im on same situatuon as Livus. My mining on v1 pool gives me Low payouts. I want to start working on the v2 pool nad i would like to Ask you guys am i correct with this. So: my plots generated for v1 pool are useless and i need to make simply solo plots. I need new wallet adress (but why?). I dont understand how its gonna work when ill create solo plots. I mean how to do to mine on pool but not solo. I just need to use pool miner with solo plots right ? And od yes how to configure this pool miner to really work on this pool.

Look at the v2 pool guide, you ll see steps by steps guide there. You dont need new wallet, just delete or backup your v1 pool plot and generate solo plots first. For some reason i dont know it only works with solo plot, you will rename or remove your passphrase to work it with that pool. Check there first for other guides and figure out, you can do it just simple steps.  

Ok..
I done it step by step like it says here:
http://burst-pool.cryptoport.io/howto.html

On each of my PC's are now new downloaded miners. And i moved my old generated plots to that miners folders.

Problem is (i think) that i had generated all my plots for my "old" one wallet.
And now when i start mining i see this:

[ltcnim]

is is also possible to mine while the plot files are generated using dcct plotter? I currently have a script running to fill 3TB in 100GB chunks, and I'd like to already use that.
also i made a little mistake in my script, and I have one overlapping nonce for each "block". That does only mean that this is wasted space right? I could live with that I guess:

0-400000
400001-800001
800002-1200001
...

fixed

uray pool with 6 miners? what happened?

I know that it's wrong, but they are already plotted. thats why I asked if that only means that I lose 1 once per 100GB chunk..

[fanepatent]

When pool mining, how to back in solo mining?

Answered on the new forum

[Sglasio]

how much stagger size must be on 280x radeon?

[cad_cdn]

+1

another great contribution!

http://burstforum.com/

a lot of complaining...
a lot of demanding...
a lot of asking the same questions over and over...
a lot of whining...
a lot of asking the same questions over and over...


1. Thanks to dev, and ALL those others making web sites, web pages, tools, custom apps, drivers, answering the same questions  over and over etc.
2. People, read the tutorials, search the threads for answers to your questions before you post
3. If You have not contributed anything to the coin or the community, you have no right to demand, complain, or whine.

In it's simplest sense, as someone outside looking in might see -

it looks and sounds like 'we all got something for free' and then are 'demanding and complaining about it'


once again, thx dev and all the contributors.

I want to say a word about #2 there. Its hard to search 400+ pages for something you might miss. I am one of the guys at #1. I posted over 200 posts on this thread alone, helping others.
Someone offered a place to move all this. A place were it can be organized, were new people can find what they are looking for.
Someone made our own forum.
http://burstforum.com/
Otherwise we will have the same discussions over and over again, and the important stuff will get buried beneath tons of posts that can be avoided.

[Avaahnaa]

When pool mining, how to back in solo mining?

Answered on the new forum

What do you mean 'rename your passphrases.txt back to what it was'?

[Amph]

When pool mining, how to back in solo mining?

Answered on the new forum

What do you mean 'rename your passphrases.txt back to what it was'?

http://localhost:8125/rewardassignment.html

set your passphrase and recipient(your recipient)

[rememberthelost]

is there a GPU plots generator ?

[Razerglass]

+1

another great contribution!

http://burstforum.com/

Everybody here is happy to help the newcomers, why not join?
http://burstforum.com/

[crowetic]

When pool mining, how to back in solo mining?

Answered on the new forum

What do you mean 'rename your passphrases.txt back to what it was'?

If you just keep copies of your solo and pool miner folders, you can just cut and paste your plots folder, and you're good to go, once you set your reward assignment of course.

[coin1974]

Hi EVERYONE!!!

i read most of this pages and have few questions..

I have 3 PC's with generated plots, on ich one is 600GB plot. I know that exist some SYMLINK or something.. But, how can i mine with this on pool like if i were mining with one PC or with one big capacity ?
Mining on pool V1 now, dont get anything for quite long time

Or how i can effectively use my 3 PC's where on every PC is 600 GB plot ?

THANKS a lot for responses!!!

You need to generate plot on pool address if you are on v1 pool i think. Are you mining on solo plots you generated? If so then you are mining on wrong pool may be that is why you didnt get anything for long time. Change pool and see About 3 pc's separate plot you join the pool from each pc and mine, i dunno if they can be merged and mine like one space.. Or wait for experts to comment, i can be wrong also i dont read all posts here so  

Yes, i have plots genereted for pool V1.

My command line: "C:\Program Files\Java\jre7\bin\java.exe" -Xmx2500m -cp pocminer.jar;lib/*;lib/akka/*;lib/jetty/* pocminer.POCMiner generate NUMBER_ADRESS 5242902 409600 6000 4

And my generated plots looks like this:

NUMBER_ADRESS_2867204_409600_2000

So, to mine on pool V2 i need to "register" on V2 with different wallet on ich PC or.?

And do wallet need to be open/runnig all the time? Or how pool recognize that i send him "share"?

Maybe some kind soul explains how to do it?
THANKS!!!!!

V2 pool works on your solo plot, you just need some settings from pool and edit your miner folder and you ll need poc pool miner. Pool instructions here http://178.62.39.204:8121/ ... Pool miner link must be on OP, please check there.   Yes you need to register with different wallet and mine on pool from each pc for now  

THANKS! I had figured out it few minutes ago Before this post

im on same situatuon as Livus. My mining on v1 pool gives me Low payouts. I want to start working on the v2 pool nad i would like to Ask you guys am i correct with this. So: my plots generated for v1 pool are useless and i need to make simply solo plots. I need new wallet adress (but why?). I dont understand how its gonna work when ill create solo plots. I mean how to do to mine on pool but not solo. I just need to use pool miner with solo plots right ? And od yes how to configure this pool miner to really work on this pool.

Look at the v2 pool guide, you ll see steps by steps guide there. You dont need new wallet, just delete or backup your v1 pool plot and generate solo plots first. For some reason i dont know it only works with solo plot, you will rename or remove your passphrase to work it with that pool. Check there first for other guides and figure out, you can do it just simple steps.  

Ok..
I done it step by step like it says here:
http://burst-pool.cryptoport.io/howto.html

On each of my PC's are now new downloaded miners. And i moved my old generated plots to that miners folders.

Problem is (i think) that i had generated all my plots for my "old" one wallet.
And now when i start mining i see this:
http://s8.postimg.org/5zt34lyo5/image.png

You need to remove or rename your passphrase to anything random. Also make sure you are using pool poc miner. Solo miner doesnt work on pool.  

[coinits]

When pool mining, how to back in solo mining?

Answered on the new forum

What do you mean 'rename your passphrases.txt back to what it was'?

http://localhost:8125/rewardassignment.html

set your passphrase and recipient(your recipient)

We he could set it to mine and I wouldn't complain heh heh

[2double0]

Anyone know some good pools?

[fanepatent]

Anyone know some good pools?

Look here on the new forum

[coinits]

Anyone know some good pools?

Look here on the new forum

If you want users there then fix this because it is back...again


and you have no pools listed