[ANN] [XMG] MAGI | CPU mining | mPoW | mPoS | [MagiPay]

[111magic]

Information example for the New and Awesome Magi Proof of Interest campaign 3

Banks do give interest but not very much! Magi does this better!
The Coin of the Magi is the digital currency of the future, fair unique and for all people living everywhere!

Rules for the Magi Proof of Interest 3 2016!

The base is very simple.
Time period: The Proof of Interest will last 3 months.

When can I register to participate? Registration will be open: 01-12-2015

How do I sign up? Tell me that you want to join the PoI here: will follow  Registration is done by posting your XMG address replying here on Bitcoingarden or PM me here.

What information should I include? Write your participating wallet XMG address in a reply here: will follow (only one address allowed to join, all addresses will be made public at the end of registration in interest of fairness of the campaign.)
(only one address a person allowed to join)

The team will check the address's initial balance, and that balance will start participating in the PoI. (After confirmation participant)

When will I receive my interest? Interest will be paid on 01-04-2016

What happens if I have more XMG in my wallet on 01-04-2016? You will receive interest on the amount present in your wallet on that date. (Advantage participant)

What happens if I have less XMG in my wallet on 01-04-2016?
You will not receive any interest from campaign, if your initial balance has decreased more than 15% at the campaigns end! (Drawback participant)

What happens if I XMG have used to pay for goods? This has no negative effect on your interest. (Receipt required)

How will be interest distributed? The interest will be distributed by means of a specific calculation. This can be influenced by the number of participants, level of the fund and total number of coins that participate.Team will check addresses random and record the coins in that address. Based on that the interest calculation will be done!

Who will pay the interest for this Proof of Interest campaign? I received the donation of will follow (hope 25.000 XMG again)
(For the third time! Love this guy)
On his request, the donor will remain anonymous! Payouts will be done by me.

Interest will be paid to the designated address wallet.
Changes of participating address during the Proof of Interest is possible only once per user in the 3 months period (changing is not advisable, though).
Exchanges or wallet address on an exchange are excluded from participation.

Your XMG balance for joining the Proof of Interest has to be min. 500 XMG

NOTE: The team reserves it's right to send a warning to a drawback member, that his balance is decrease more than 15% on their regular random balance checks.

Thinking about these rules and i think they look ok!

Hmmm i was thinking, maybe you can set a limit of people who can join?

Thats a good idea! Let me take a look into that.
Any idea how many people max?

[goldlabel]

Information example for the New and Awesome Magi Proof of Interest campaign 3

Banks do give interest but not very much! Magi does this better!
The Coin of the Magi is the digital currency of the future, fair unique and for all people living everywhere!

Rules for the Magi Proof of Interest 3 2016!

The base is very simple.
Time period: The Proof of Interest will last 3 months.

When can I register to participate? Registration will be open: 01-12-2015

How do I sign up? Tell me that you want to join the PoI here: will follow  Registration is done by posting your XMG address replying here on Bitcoingarden or PM me here.

What information should I include? Write your participating wallet XMG address in a reply here: will follow (only one address allowed to join, all addresses will be made public at the end of registration in interest of fairness of the campaign.)
(only one address a person allowed to join)

The team will check the address's initial balance, and that balance will start participating in the PoI. (After confirmation participant)

When will I receive my interest? Interest will be paid on 01-04-2016

What happens if I have more XMG in my wallet on 01-04-2016? You will receive interest on the amount present in your wallet on that date. (Advantage participant)

What happens if I have less XMG in my wallet on 01-04-2016?
You will not receive any interest from campaign, if your initial balance has decreased more than 15% at the campaigns end! (Drawback participant)

What happens if I XMG have used to pay for goods? This has no negative effect on your interest. (Receipt required)

How will be interest distributed? The interest will be distributed by means of a specific calculation. This can be influenced by the number of participants, level of the fund and total number of coins that participate.Team will check addresses random and record the coins in that address. Based on that the interest calculation will be done!

Who will pay the interest for this Proof of Interest campaign? I received the donation of will follow (hope 25.000 XMG again)
(For the third time! Love this guy)
On his request, the donor will remain anonymous! Payouts will be done by me.

Interest will be paid to the designated address wallet.
Changes of participating address during the Proof of Interest is possible only once per user in the 3 months period (changing is not advisable, though).
Exchanges or wallet address on an exchange are excluded from participation.

Your XMG balance for joining the Proof of Interest has to be min. 500 XMG

NOTE: The team reserves it's right to send a warning to a drawback member, that his balance is decrease more than 15% on their regular random balance checks.

Thinking about these rules and i think they look ok!

Hmmm i was thinking, maybe you can set a limit of people who can join?

Thats a good idea! Let me take a look into that.
Any idea how many people max?

maybe 100-150?

[111magic]

Think this is a good idea!
150 would be a good amount.
Other people any ideas about this?

[joelao95]

It seems that I am fianlly able to get over my personal stuffs, and to get the magi stuffs on the track in the following periods (estimate to be weeks or maybe months). It was tough and this happened back to February of this year. I won't be too honest to talk about what happened, but you know that is something like a life change. I still have to finalize my stuffs and then a concrete plan about magi.

A rough plan, 1) the first thing I believe to look at that is very urgent is the PoW mining we talked; I might be able to look into the things in the middle of Dec. or during the Christmas: basically summarize the PoW / PoS discussion, a plan as to what I am going to do, and pushing actual works out (in Jan. or most likely Feb.). The progress will depend on my timing in real job. I am not saying I do have the solutions as to what happened, but I do have energies to push out solutions, and believe the coin deserves such efforts; 2) I like and would like to push the magi-pi project; 3) We have to push XMG towards sort of business and make it appear to be a role that it should be. I am not guaranteeing what I will be done; I felt this is the turning point of my own situation and thus the above updates.

Thanks to all for your patience and efforts by far.

Glad you are back Joe and ready to push Magi forward to new heights. It is nice to see new stuff happen in the Magi community. It is always active and very friendly. A Coin Magi wallet for the Raspberry Pi would be something great to have. Happy Thanksgiving by the way! 

An RPi XMG wallet? There's a TON of work that needs to be done on the XMG wallet before that even begins to make sense. It's based on older coin code, and it SERIOUSLY shows it in that it maxes out a core for quite a while on startup, and uses quite a bit of memory by itself. I'm fairly sure that if you tried to load magid on a Pi or a Pi2, it would get OOM killed unless you had swap space to supplement the small RAM capacity - and even then, you'd have to wait a week for it to finish starting up.

This is quite right. I have a desire to adapt the latest bitcoin code to XMG, which, however, is with the lower priority at this moment than what's needs to make changes as to the coin specifications.

Abiky, 111magic, kondiomir, thanks for the compliment, Happy holidays.

[111magic]

It seems that I am fianlly able to get over my personal stuffs, and to get the magi stuffs on the track in the following periods (estimate to be weeks or maybe months). It was tough and this happened back to February of this year. I won't be too honest to talk about what happened, but you know that is something like a life change. I still have to finalize my stuffs and then a concrete plan about magi.

A rough plan, 1) the first thing I believe to look at that is very urgent is the PoW mining we talked; I might be able to look into the things in the middle of Dec. or during the Christmas: basically summarize the PoW / PoS discussion, a plan as to what I am going to do, and pushing actual works out (in Jan. or most likely Feb.). The progress will depend on my timing in real job. I am not saying I do have the solutions as to what happened, but I do have energies to push out solutions, and believe the coin deserves such efforts; 2) I like and would like to push the magi-pi project; 3) We have to push XMG towards sort of business and make it appear to be a role that it should be. I am not guaranteeing what I will be done; I felt this is the turning point of my own situation and thus the above updates.

Thanks to all for your patience and efforts by far.

Glad you are back Joe and ready to push Magi forward to new heights. It is nice to see new stuff happen in the Magi community. It is always active and very friendly. A Coin Magi wallet for the Raspberry Pi would be something great to have. Happy Thanksgiving by the way! 

An RPi XMG wallet? There's a TON of work that needs to be done on the XMG wallet before that even begins to make sense. It's based on older coin code, and it SERIOUSLY shows it in that it maxes out a core for quite a while on startup, and uses quite a bit of memory by itself. I'm fairly sure that if you tried to load magid on a Pi or a Pi2, it would get OOM killed unless you had swap space to supplement the small RAM capacity - and even then, you'd have to wait a week for it to finish starting up.

This is quite right. I have a desire to adapt the latest bitcoin code to XMG, which, however, is with the lower priority at this moment than what's needs to make changes as to the coin specifications.

Abiky, 111magic, kondiomir, thanks for the compliment, Happy holidays.

Nice Joe. It's good for our awesome Magi community to know that you are working on the improvements. Keep us informed about the progress.

[111magic]

Remember all: Although nobody would like to sell their XMG and just receive staking rewards, Magi could use some volume on bittrex!

[111magic]

https://bitcointalk.org/index.php?topic=1026371.msg13043429#msg13043429

Ivugeo exchange is working on this issue!
Hope they can solve it!

https://bitcointalk.org/index.php?topic=1026371.msg13095912#msg13095912

Looks like they are still working on the issues. Hope they will solve the problems!
Give them some time.

[IvugeoEvolutionCoin]

https://bitcointalk.org/index.php?topic=1026371.msg13043429#msg13043429

Ivugeo exchange is working on this issue!
Hope they can solve it!

https://bitcointalk.org/index.php?topic=1026371.msg13095912#msg13095912

Looks like they are still working on the issues. Hope they will solve the problems!
Give them some time.

Hi 111magic!

Thank you for your words of understanding and encouragement! At the moment we are working on the solution of our problems! As I said, we will solve this problem in 5 days! We look forward to close cooperation with your community, I think that only together we can create an honest business! We are always open to new and honest people!

[111magic]

https://bitcointalk.org/index.php?topic=1026371.msg13043429#msg13043429

Ivugeo exchange is working on this issue!
Hope they can solve it!

https://bitcointalk.org/index.php?topic=1026371.msg13095912#msg13095912

Looks like they are still working on the issues. Hope they will solve the problems!
Give them some time.

Hi 111magic!

Thank you for your words of understanding and encouragement! At the moment we are working on the solution of our problems! As I said, we will solve this problem in 5 days! We look forward to close cooperation with your community, I think that only together we can create an honest business! We are always open to new and honest people!

Thanks for the nice words. Magi knows its hard in Crypto-world. But if honest and hard working people work together there will be good options for a great future. Keep us informed about the progress of the Ivugeo exchange!

[111magic]

This is just awesome ! I love this picture ! I think this is the best Magi fan art ever realised ! You're really good at graphics (I saw your Expanse wallpapers, they're awesome too ) !

Still like this one Kondiomir.
Its a cool picture.
Can i request a special one?
For the new Proof of Interest!

[digibob00]

It seems that I am fianlly able to get over my personal stuffs, and to get the magi stuffs on the track in the following periods (estimate to be weeks or maybe months). It was tough and this happened back to February of this year. I won't be too honest to talk about what happened, but you know that is something like a life change. I still have to finalize my stuffs and then a concrete plan about magi.

A rough plan, 1) the first thing I believe to look at that is very urgent is the PoW mining we talked; I might be able to look into the things in the middle of Dec. or during the Christmas: basically summarize the PoW / PoS discussion, a plan as to what I am going to do, and pushing actual works out (in Jan. or most likely Feb.). The progress will depend on my timing in real job. I am not saying I do have the solutions as to what happened, but I do have energies to push out solutions, and believe the coin deserves such efforts; 2) I like and would like to push the magi-pi project; 3) We have to push XMG towards sort of business and make it appear to be a role that it should be. I am not guaranteeing what I will be done; I felt this is the turning point of my own situation and thus the above updates.

Thanks to all for your patience and efforts by far.

Glad you are back Joe and ready to push Magi forward to new heights. It is nice to see new stuff happen in the Magi community. It is always active and very friendly. A Coin Magi wallet for the Raspberry Pi would be something great to have. Happy Thanksgiving by the way! 

An RPi XMG wallet? There's a TON of work that needs to be done on the XMG wallet before that even begins to make sense. It's based on older coin code, and it SERIOUSLY shows it in that it maxes out a core for quite a while on startup, and uses quite a bit of memory by itself. I'm fairly sure that if you tried to load magid on a Pi or a Pi2, it would get OOM killed unless you had swap space to supplement the small RAM capacity - and even then, you'd have to wait a week for it to finish starting up.

Wolf0 which version of wallet give you that problem? with or without Qt?

i've wallet running on RPi 2 Kernel 3.x in less than 2 min ( if synched ).

There are also some extra stuff to do on RPi 2 and i'm currently modding miner for that but it's really slow because i've nit much time.

If needed i can give you some info for build it on RPi 2, because my site shutdown some days ago.

Regards

[digibob00]

It seems that I am fianlly able to get over my personal stuffs, and to get the magi stuffs on the track in the following periods (estimate to be weeks or maybe months). It was tough and this happened back to February of this year. I won't be too honest to talk about what happened, but you know that is something like a life change. I still have to finalize my stuffs and then a concrete plan about magi.

A rough plan, 1) the first thing I believe to look at that is very urgent is the PoW mining we talked; I might be able to look into the things in the middle of Dec. or during the Christmas: basically summarize the PoW / PoS discussion, a plan as to what I am going to do, and pushing actual works out (in Jan. or most likely Feb.). The progress will depend on my timing in real job. I am not saying I do have the solutions as to what happened, but I do have energies to push out solutions, and believe the coin deserves such efforts; 2) I like and would like to push the magi-pi project; 3) We have to push XMG towards sort of business and make it appear to be a role that it should be. I am not guaranteeing what I will be done; I felt this is the turning point of my own situation and thus the above updates.

Thanks to all for your patience and efforts by far.

Glad you are back Joe and ready to push Magi forward to new heights. It is nice to see new stuff happen in the Magi community. It is always active and very friendly. A Coin Magi wallet for the Raspberry Pi would be something great to have. Happy Thanksgiving by the way! 

An RPi XMG wallet? There's a TON of work that needs to be done on the XMG wallet before that even begins to make sense. It's based on older coin code, and it SERIOUSLY shows it in that it maxes out a core for quite a while on startup, and uses quite a bit of memory by itself. I'm fairly sure that if you tried to load magid on a Pi or a Pi2, it would get OOM killed unless you had swap space to supplement the small RAM capacity - and even then, you'd have to wait a week for it to finish starting up.

Wolf0 which version of wallet give you that problem? with or without Qt?

i've wallet running on RPi 2 Kernel 3.x in less than 2 min ( if synched ).

There are also some extra stuff to do on RPi 2 and i'm currently modding miner for that but it's really slow because i've nit much time.

If needed i can give you some info for build it on RPi 2, because my site shutdown some days ago.

Regards

I have an ARM board, but it's not an RPi2. Anyways, do you use swap on that? And I'm amazingly surprised if it starts in less than 2min if synced.

Yes i've enabled swap but only for the Qt version.

I've also checked on other board, but RPi 2 give me the best results.

I'm waiting banana pi m3, when arrive, i can check also this one.

I'm using also RPi 2 for mining with your modded miner + some extraflag for RPi optimization at 4.73k/hash without overclock and 5,25K/hash with RPi2 overclock @ 1 ghz.

All without heatsink.


Regards

[Abiky]

I'm using also RPi 2 for mining with your modded miner + some extraflag for RPi optimization at 4.73k/hash without overclock and 5,25K/hash with RPi2 overclock @ 1 ghz.

All without heatsink.

Regards

Those are some nice results from mining with a Raspberry Pi 2. I also have one, but I'm not very familiar with overclocking it (as I don't know how to do so on the Pi). Even still, that is a very decent hashrate and sometimes I wonder how XMG mining would be when we merge different RPis as a single system (parallel computing). If this could be achieved on multiple RPis, then it would be a totally awesome XMG mining machine!  

[digibob00]

It seems that I am fianlly able to get over my personal stuffs, and to get the magi stuffs on the track in the following periods (estimate to be weeks or maybe months). It was tough and this happened back to February of this year. I won't be too honest to talk about what happened, but you know that is something like a life change. I still have to finalize my stuffs and then a concrete plan about magi.

A rough plan, 1) the first thing I believe to look at that is very urgent is the PoW mining we talked; I might be able to look into the things in the middle of Dec. or during the Christmas: basically summarize the PoW / PoS discussion, a plan as to what I am going to do, and pushing actual works out (in Jan. or most likely Feb.). The progress will depend on my timing in real job. I am not saying I do have the solutions as to what happened, but I do have energies to push out solutions, and believe the coin deserves such efforts; 2) I like and would like to push the magi-pi project; 3) We have to push XMG towards sort of business and make it appear to be a role that it should be. I am not guaranteeing what I will be done; I felt this is the turning point of my own situation and thus the above updates.

Thanks to all for your patience and efforts by far.

Glad you are back Joe and ready to push Magi forward to new heights. It is nice to see new stuff happen in the Magi community. It is always active and very friendly. A Coin Magi wallet for the Raspberry Pi would be something great to have. Happy Thanksgiving by the way! 

An RPi XMG wallet? There's a TON of work that needs to be done on the XMG wallet before that even begins to make sense. It's based on older coin code, and it SERIOUSLY shows it in that it maxes out a core for quite a while on startup, and uses quite a bit of memory by itself. I'm fairly sure that if you tried to load magid on a Pi or a Pi2, it would get OOM killed unless you had swap space to supplement the small RAM capacity - and even then, you'd have to wait a week for it to finish starting up.

Wolf0 which version of wallet give you that problem? with or without Qt?

i've wallet running on RPi 2 Kernel 3.x in less than 2 min ( if synched ).

There are also some extra stuff to do on RPi 2 and i'm currently modding miner for that but it's really slow because i've nit much time.

If needed i can give you some info for build it on RPi 2, because my site shutdown some days ago.

Regards

I have an ARM board, but it's not an RPi2. Anyways, do you use swap on that? And I'm amazingly surprised if it starts in less than 2min if synced.

Yes i've enabled swap but only for the Qt version.

I've also checked on other board, but RPi 2 give me the best results.

I'm waiting banana pi m3, when arrive, i can check also this one.

I'm using also RPi 2 for mining with your modded miner + some extraflag for RPi optimization at 4.73k/hash without overclock and 5,25K/hash with RPi2 overclock @ 1 ghz.

All without heatsink.


Regards

Are you on IRC? I might run it on my Arrow SoCKit.

Sorry but actually i can't ( i'm @ office )

I've reuploaded the Magi Wallet for RPi2 without Qt
hzzp://s000.tinyupload.com/?file_id=09267376571534088364

And the same with Qt
hzzp://s000.tinyupload.com/?file_id=36203352951804969468

Try if there's some speed difference.

Also, all of that on Kernel 3.x not Kernel 4.x.

If needed i've also the speed screenshot from my site raspi2miner.is-great.org, but i've to find another place to host my
page because the actual provider don't like bitcoin related site.

Regards

[digibob00]

I'm using also RPi 2 for mining with your modded miner + some extraflag for RPi optimization at 4.73k/hash without overclock and 5,25K/hash with RPi2 overclock @ 1 ghz.

All without heatsink.

Regards

Those are some nice results from mining with a Raspberry Pi 2. I also have one, but I'm not very familiar with overclocking it (as I don't know how to do so on the Pi). Even still, that is a very decent hashrate and sometimes I wonder how XMG mining would be when we merge different RPis as a single system (parallel computing). If this could be achieved on multiple RPis, then it would be a totally awesome XMG mining machine!  

Yes true.

i'm also modding the code to use the GPU of RPi, but actually i've some synch problem between NEON ASM code an mine thread x CPU.

I hope to solve that...

Regards

[digibob00]

It seems that I am fianlly able to get over my personal stuffs, and to get the magi stuffs on the track in the following periods (estimate to be weeks or maybe months). It was tough and this happened back to February of this year. I won't be too honest to talk about what happened, but you know that is something like a life change. I still have to finalize my stuffs and then a concrete plan about magi.

A rough plan, 1) the first thing I believe to look at that is very urgent is the PoW mining we talked; I might be able to look into the things in the middle of Dec. or during the Christmas: basically summarize the PoW / PoS discussion, a plan as to what I am going to do, and pushing actual works out (in Jan. or most likely Feb.). The progress will depend on my timing in real job. I am not saying I do have the solutions as to what happened, but I do have energies to push out solutions, and believe the coin deserves such efforts; 2) I like and would like to push the magi-pi project; 3) We have to push XMG towards sort of business and make it appear to be a role that it should be. I am not guaranteeing what I will be done; I felt this is the turning point of my own situation and thus the above updates.

Thanks to all for your patience and efforts by far.

Glad you are back Joe and ready to push Magi forward to new heights. It is nice to see new stuff happen in the Magi community. It is always active and very friendly. A Coin Magi wallet for the Raspberry Pi would be something great to have. Happy Thanksgiving by the way! 

An RPi XMG wallet? There's a TON of work that needs to be done on the XMG wallet before that even begins to make sense. It's based on older coin code, and it SERIOUSLY shows it in that it maxes out a core for quite a while on startup, and uses quite a bit of memory by itself. I'm fairly sure that if you tried to load magid on a Pi or a Pi2, it would get OOM killed unless you had swap space to supplement the small RAM capacity - and even then, you'd have to wait a week for it to finish starting up.

Wolf0 which version of wallet give you that problem? with or without Qt?

i've wallet running on RPi 2 Kernel 3.x in less than 2 min ( if synched ).

There are also some extra stuff to do on RPi 2 and i'm currently modding miner for that but it's really slow because i've nit much time.

If needed i can give you some info for build it on RPi 2, because my site shutdown some days ago.

Regards

I have an ARM board, but it's not an RPi2. Anyways, do you use swap on that? And I'm amazingly surprised if it starts in less than 2min if synced.

Yes i've enabled swap but only for the Qt version.

I've also checked on other board, but RPi 2 give me the best results.

I'm waiting banana pi m3, when arrive, i can check also this one.

I'm using also RPi 2 for mining with your modded miner + some extraflag for RPi optimization at 4.73k/hash without overclock and 5,25K/hash with RPi2 overclock @ 1 ghz.

All without heatsink.


Regards

Are you on IRC? I might run it on my Arrow SoCKit.

I've checked now the Arrow SoCKit for first time.

Wow, a good board, also with 2 Gb of ram....appers to be very promising.

a little bit more expansive than rpi , but also with FPGA inside....very good!

Regards

[digibob00]

I'm using also RPi 2 for mining with your modded miner + some extraflag for RPi optimization at 4.73k/hash without overclock and 5,25K/hash with RPi2 overclock @ 1 ghz.

All without heatsink.

Regards

Those are some nice results from mining with a Raspberry Pi 2. I also have one, but I'm not very familiar with overclocking it (as I don't know how to do so on the Pi). Even still, that is a very decent hashrate and sometimes I wonder how XMG mining would be when we merge different RPis as a single system (parallel computing). If this could be achieved on multiple RPis, then it would be a totally awesome XMG mining machine!  

Yes true.

i'm also modding the code to use the GPU of RPi, but actually i've some synch problem between NEON ASM code an mine thread x CPU.

I hope to solve that...

Regards

Well, hop on IRC when you can, I'll be there. The RPi's GPU doesn't support OpenCL, right?

No, openCL not supported @ Moment.

you can try in this way to use the broadcom chip.

https://rpiplayground.wordpress.com/2014/05/03/hacking-the-gpu-for-fun-and-profit-pt-1/

http://maazl.de/project/vc4asm/doc/index.html

If u need OpenCL there's some implementation here http://parallelplusplus.blogspot.it/2015/10/opencl-on-raspberry-pi-2.html but without GPU, only OpenCL on CPU usage.

Regards

[digibob00]

I'm using also RPi 2 for mining with your modded miner + some extraflag for RPi optimization at 4.73k/hash without overclock and 5,25K/hash with RPi2 overclock @ 1 ghz.

All without heatsink.

Regards

Those are some nice results from mining with a Raspberry Pi 2. I also have one, but I'm not very familiar with overclocking it (as I don't know how to do so on the Pi). Even still, that is a very decent hashrate and sometimes I wonder how XMG mining would be when we merge different RPis as a single system (parallel computing). If this could be achieved on multiple RPis, then it would be a totally awesome XMG mining machine!  

Yes true.

i'm also modding the code to use the GPU of RPi, but actually i've some synch problem between NEON ASM code an mine thread x CPU.

I hope to solve that...

Regards

Well, hop on IRC when you can, I'll be there. The RPi's GPU doesn't support OpenCL, right?

No, openCL not supported @ Moment.

you can try in this way to use the broadcom chip.

https://rpiplayground.wordpress.com/2014/05/03/hacking-the-gpu-for-fun-and-profit-pt-1/

http://maazl.de/project/vc4asm/doc/index.html

If u need OpenCL there's some implementation here http://parallelplusplus.blogspot.it/2015/10/opencl-on-raspberry-pi-2.html but without GPU, only OpenCL on CPU usage.

Regards

OpenCL on the CPU is a waste of time here. Either I finish my mostly done OpenCL M7M implementation and run on AMD, or do an FPGA design for M7M. Probably the former, the latter would be hard.

Wow good opencl m7m algo!

I'm porting (very slowly due to time needed ) the m7m routine to neon asm.

Also i'm making some little modding anso, for examples exp_n(double xt) do more check before return the exp(xt), but if u debug the code, i see 99,99% of times the if used is the last, but before doing that u use lot of cpu cycle that can be avoided.

Also for the exp_n2, etc..

On big cpu/gpu is not a problem 1 o 2 cpu cycles plus, but on a little arm it's really different :-)

Regards

[goldlabel]

[elpsycongro]

It seems that I am fianlly able to get over my personal stuffs, and to get the magi stuffs on the track in the following periods (estimate to be weeks or maybe months). It was tough and this happened back to February of this year. I won't be too honest to talk about what happened, but you know that is something like a life change. I still have to finalize my stuffs and then a concrete plan about magi.

A rough plan, 1) the first thing I believe to look at that is very urgent is the PoW mining we talked; I might be able to look into the things in the middle of Dec. or during the Christmas: basically summarize the PoW / PoS discussion, a plan as to what I am going to do, and pushing actual works out (in Jan. or most likely Feb.). The progress will depend on my timing in real job. I am not saying I do have the solutions as to what happened, but I do have energies to push out solutions, and believe the coin deserves such efforts; 2) I like and would like to push the magi-pi project; 3) We have to push XMG towards sort of business and make it appear to be a role that it should be. I am not guaranteeing what I will be done; I felt this is the turning point of my own situation and thus the above updates.

Thanks to all for your patience and efforts by far.

Glad you are back Joe and ready to push Magi forward to new heights. It is nice to see new stuff happen in the Magi community. It is always active and very friendly. A Coin Magi wallet for the Raspberry Pi would be something great to have. Happy Thanksgiving by the way! 

An RPi XMG wallet? There's a TON of work that needs to be done on the XMG wallet before that even begins to make sense. It's based on older coin code, and it SERIOUSLY shows it in that it maxes out a core for quite a while on startup, and uses quite a bit of memory by itself. I'm fairly sure that if you tried to load magid on a Pi or a Pi2, it would get OOM killed unless you had swap space to supplement the small RAM capacity - and even then, you'd have to wait a week for it to finish starting up.

Wolf0 which version of wallet give you that problem? with or without Qt?

i've wallet running on RPi 2 Kernel 3.x in less than 2 min ( if synched ).

There are also some extra stuff to do on RPi 2 and i'm currently modding miner for that but it's really slow because i've nit much time.

If needed i can give you some info for build it on RPi 2, because my site shutdown some days ago.

Regards

I have an ARM board, but it's not an RPi2. Anyways, do you use swap on that? And I'm amazingly surprised if it starts in less than 2min if synced.

Yes i've enabled swap but only for the Qt version.

I've also checked on other board, but RPi 2 give me the best results.

I'm waiting banana pi m3, when arrive, i can check also this one.

I'm using also RPi 2 for mining with your modded miner + some extraflag for RPi optimization at 4.73k/hash without overclock and 5,25K/hash with RPi2 overclock @ 1 ghz.

All without heatsink.


Regards

may i ask how are you able to get 4.73k hash with RPI2  i am lucky to get alittle over 1k