[ANN] [XMG] MAGI | CPU mining | mPoW | mPoS | [MagiPay]

[seeksilence]

http://104.207.149.217 xmgpool was down?

There seems have a problem with wallet. My pool has different block height with supernova. I redo the fix but still found some problem. It stucks on some block. Do not know what's going on.

Just restart to see if I can fix it.

[seeksilence]

Misbehaving: 182.239.128.11:50250 (0 -> 100) DISCONNECTING
disconnecting node 182.239.128.11:50250
ERROR: ProcessBlock() : block with too little proof-of-stake
accepted connection 86.145.68.129:63996
send version message: version 71051, blocks=1444083, us=104.207.149.217:8233, them=86.145.68.129:63996, peer=86.145.68.129:63996
Added time data, samples 28, offset -1 (+0 minutes)
Moving 86.145.68.129:8233 to tried
receive version message: version 71051, blocks=1446244, us=104.207.149.217:8233, them=86.145.68.129:8233, peer=86.145.68.129:63996
connection from 81.95.126.198:57885 dropped (banned)
received block 0000008b14e2845e0a8c
Misbehaving: 86.145.68.129:63996 (0 -> 100) DISCONNECTING
disconnecting node 86.145.68.129:63996
ERROR: ProcessBlock() : block with too little proof-of-work
connection timeout
ThreadRPCServer method=getinfo


accepted connection 67.173.120.250:44629
send version message: version 71051, blocks=1444083, us=104.207.149.217:8233, them=67.173.120.250:44629, peer=67.173.120.250:44629
Added time data, samples 31, offset -66 (-1 minutes)
nTimeOffset = +0  (+0 minutes)
Added 67.173.120.250:8233 from 67.173.120.250: 28 tried, 1979 new
Moving 67.173.120.250:8233 to tried
receive version message: version 71041, blocks=1447355, us=104.207.149.217:8233, them=67.173.120.250:8233, peer=67.173.120.250:44629
trying connection 90.150.185.182:8233 lastseen=0.2hrs
received block 20c147f37299c555b43e
ProcessBlock: ORPHAN BLOCK, prev=22fd36aec606919c3883



In my pool, the nethash is jus 222kH/s, weird. I guess my pool is on another fork?

[111magic]

Don't know amigo. I hope Joe will have some time soon for checking all things.

[seeksilence]

I will temporarily shut down the pool and use a new wallet to do some test.

[111magic]

I will temporarily shut down the pool and use a new wallet to do some test.

Ok keep us informed amigo! Thanks in advance

[starmman]

My wallet says current block is 1444083, network weight 1427, magi explorer says current block is 1446252

I think that I might be on a fork again =(

[ex33s]

My wallet says current block is 1444083, network weight 1427, magi explorer says current block is 1446252

I think that I might be on a fork again =(

which peers are you connected to?

[The Frisian]

My wallet says current block is 1444083, network weight 1427, magi explorer says current block is 1446252

I think that I might be on a fork again =(

Magi Explorer is wrong, look at these https://chainz.cryptoid.info/xmg/#!extraction
They are mining with blocks 43.25 on the wrong chain.   
Look at supernova for the current block, around 1444413 now.

[ex33s]

My wallet says current block is 1444083, network weight 1427, magi explorer says current block is 1446252

I think that I might be on a fork again =(

Magi Explorer is wrong, look at these https://chainz.cryptoid.info/xmg/#!extraction
They are mining with blocks 43.25 on the wrong chain.   
Look at supernova for the current block, around 1444413 now.

You can also look at https://poolinfo.systms.org/#magi which is on the same block as supernova

[starmman]

My wallet says current block is 1444083, network weight 1427, magi explorer says current block is 1446252

I think that I might be on a fork again =(

which peers are you connected to?

I've just restarted m-core with a --rescan and reset my config file to contain only the hosts in the op. If that fails - I'll delete the chain again and resync from the blockchain I downloaded this morning

Thanks for the links to the correct  block height =)

[seeksilence]

I use a new wallet, it works now on http://104.207.149.217.

The registration info is kept and other table are truncated for a fresh start.

Current height is 1444440.

[mozsi]

As it is strange, in a coin a few days ago, someone invested 250 bitcoins, and the price again returned to the previous place

As far as I know it was a pump n dump, but who knows for sure, right? Maybe someone bought some. For now anyways 3500 satoshi price is a good buy opportunity IMO (maybe it will get lower to 2900 - 1900 area), so please don't buy in just because someone on the internet told you so.

[scaran]

LOL. At now i cant login to http://104.207.149.217 pool. Registered today. username and password do not match. starngly

[Redrover]

Finally got my wallet synced - had to delete it all again, replace with the downloaded blockchain and added these nodes to my magi.conf

addnode=213.32.21.37

addnode=104.128.225.215

addnode=216.189.151.56

Hopefully this time it stays synced.

edit: replaced original wallet.dat with a backup from last week and the missing coins showed up.  I'm happy!

[xinwao]

We updated the wallet version to v1.4 to enable a fix to the splitting. I'll give more description regarding the fix. There is splitting around block 1443980; it wasn't confirmed that is necessary a fork from pool, as the inconsistent block is a PoS block based on a comparison of two chains available. Given that, the fix is to start from that point. Procedure to startup on a clean chain:

1) Download the wallet v1.4.0 (will push other versions into that):

http://coinmagi.org/bin/m-wallet-1.4.0/

2) Backup wallet.dat;

3) The prior blockdata must be removed before launching the new wallet:

Remove everything under the Magi or .magi folder except for wallet.dat:

Windows: %appdata%\Magi
Linux: ~/.magi

4) If you wish to redownload blockchain from scratch, skip to 5)

5) Download block chain from:

http://coinmagi.org/bin/block-chain/

and unzip the file;

6) Place all of the contents under "m-blockchain" into Magi or .magi;

7) Launch the new wallet.

Source:

https://github.com/magi-project/magi

I'll update relevant docs and web once I get a chance back on the stuffs, and some more descriptions.


Nodes:

Code:

connect=104.128.225.215
connect=216.189.151.56

Please provide all the binaries. There is no deamon, only qt-wallet provided in version 1.4.0. Please make this release professional like other serious coins. Thanks.
When the deamon exe for Windows will be available?

[111magic]

Xinwao hope Joe will do that soon. Look at the last line in his post.

[seeksilence]

LOL. At now i cant login to http://104.207.149.217 pool. Registered today. username and password do not match. starngly

oops. I backed up the database yesterday and use that database as a start. I have the copy of the old one. I will move those info to the database. Just wait a few minutes.


Just moved the new registration information. Should work now. Sorry for that.
Need some time to clean the old database.

[VersiJinx]

We updated the wallet version to v1.4 to enable a fix to the splitting. I'll give more description regarding the fix. There is splitting around block 1443980; it wasn't confirmed that is necessary a fork from pool, as the inconsistent block is a PoS block based on a comparison of two chains available. Given that, the fix is to start from that point. Procedure to startup on a clean chain:

1) Download the wallet v1.4.0 (will push other versions into that):

http://coinmagi.org/bin/m-wallet-1.4.0/

2) Backup wallet.dat;

3) The prior blockdata must be removed before launching the new wallet:

Remove everything under the Magi or .magi folder except for wallet.dat:

Windows: %appdata%\Magi
Linux: ~/.magi

4) If you wish to redownload blockchain from scratch, skip to 5)

5) Download block chain from:

http://coinmagi.org/bin/block-chain/

and unzip the file;

6) Place all of the contents under "m-blockchain" into Magi or .magi;

7) Launch the new wallet.

Source:

https://github.com/magi-project/magi

I'll update relevant docs and web once I get a chance back on the stuffs, and some more descriptions.


Nodes:

Code:

connect=104.128.225.215
connect=216.189.151.56

Please provide all the binaries. There is no deamon, only qt-wallet provided in version 1.4.0. Please make this release professional like other serious coins. Thanks.
When the deamon exe for Windows will be available?

Please make this release professional.. don't be impractical, this release was on the fly super fast solely to fix a critical issue in the block chain and so people can continue to mine and trade. Dev is not a program wizard working 24/7. Besides, dev already stated he will release proper documents as soon as he gets a chance, i'm for one impressed at how quickly a solution was released for the problem that arose, great response time, cut joe some slack.

[Vitalik_Pedik]

10 minute analyzing defferense in code between old version of client and current 1.4 on github result:
NOTHING was done to prevent splitting in future.
lol

[The Frisian]

10 minute analyzing defferense in code between old version of client and current 1.4 on github result:
NOTHING was done to prevent splitting in future.
lol

Normal way : First clean the mesh, second start to analyze the problem, third make a solution, fourth test the solution, fifth update the program, etc
I guess they are now in the first stage and the second stage will start soon, ending with a wallet update in the final stage.


Blocksize supernova right now 0.25.



I keep on staking.