[ANN]Joincoin (J) ToR Anonymous All Algorithm mining! *1.3 WALLET UPDATE!*

[bittamak]

Is there an exchange anyone?  thx  don't see any on the op.

Its listed at Bittrex

[Lasergun]

Is there an exchange anyone?  thx  don't see any on the op.

Its listed at Bittrex

Yes, there is only one an exchange now where you can buy and sell your Joincoins: https://bittrex.com/Market/?MarketName=BTC-J

[tbearhere]

Is there an exchange anyone?  thx  don't see any on the op.

Its listed at Bittrex

Yes, there is only one an exchange now where you can buy and sell your Joincoins: https://bittrex.com/Market/?MarketName=BTC-J

Thx Lasergun......now to get some nodes.

[tbearhere]

probably this has been pointed out already, but the OP is severly outdated!
exchanges, nodes, explorers...

Yes......very outdated.

[tbearhere]

Do I have to put my wallet in a certion mode if I put in all algo's in the conf file?
Algo=

"sha" "x11" "x13" "x15" "scrypt" "nist5" "groestle" "pentablake" "whirlpool" "luffa" "keccak" "quark" "bastion

[pjcltd]

Do I have to put my wallet in a certion mode if I put in all algo's in the conf file?
Algo=

"sha" "x11" "x13" "x15" "scrypt" "nist5" "groestle" "pentablake" "whirlpool" "luffa" "keccak" "quark" "bastion

Yes you do
What algo are you going to use?

[Lasergun]

Is there an exchange anyone?  thx  don't see any on the op.

Its listed at Bittrex

Yes, there is only one an exchange now where you can buy and sell your Joincoins: https://bittrex.com/Market/?MarketName=BTC-J

Thx Lasergun......now to get some nodes.

Currently (in the last 24 hrs) working nodes:

Code:

addnode=jzxs646bc3rajr3u.onion:17941
addnode=53zy47p5wly5penk.onion:17941
addnode=ridljjqenfs4c6vh.onion:17941
addnode=tfcqa4tk3yvqv5ui.onion:17941
addnode=z6no6cocgqedsohi.onion:17941
addnode=em6xhxz23p24u5gy.onion:17941
addnode=5bcdonwgdlyno2ck.onion:17941
addnode=a7hhkiyjbq7b3h7d.onion:17941
addnode=drtevq326tweby2k.onion:17941
addnode=flthz32v3eoiu3bv.onion:17941
addnode=gubdt2dvix6tpbv6.onion:17941
addnode=kpdzck6bx6gakrnh.onion:17941
addnode=lrrsfoxsn7p3ewg2.onion:17941
addnode=n5x4ym2ju3dszzqo.onion:17941
addnode=skh7p2x7w24ahhbv.onion:17941
addnode=z6no6cocgqedsohi.onion:17941
addnode=ozkzcn3gp34dx5mp.onion:17941
addnode=sjriwx4jzbwcraqu.onion:17941
addnode=vqa7hnvicoi6grjd.onion:17941
addnode=2kfh4763wgviagmk.onion:17941
addnode=zadd56rllxv7pynl.onion:17941
addnode=em6xhxz23p24u5gy.onion:17941
addnode=bw3llynqxcrd5gvq.onion:17941
addnode=gdhtrc7qoh3qowvf.onion:17941

You can always find active nodes on chainz.cryptoid.info and on multifaucet.tk.

[tbearhere]

Do I have to put my wallet in a certion mode if I put in all algo's in the conf file?
Algo=

"sha" "x11" "x13" "x15" "scrypt" "nist5" "groestle" "pentablake" "whirlpool" "luffa" "keccak" "quark" "bastion

Yes you do
What algo are you going to use?

Not sure yet what algo......but how do you put the wallet in a mode plz?  thx
Do I need gen=1 in the conf file or gen=0 or none at all? thx

[pallas]

Stock sgminer whirlpool algo:

r9 280x (1020 Mhz): ~5 Mh/s
r9 290x (1000 Mhz): ~7 Mh/s

My new miner:

r9 280x (1020 Mhz): ~10 Mh/s
r9 290x (1000 Mhz): ~40 Mh/s

Tahiti still needs work...

[DOGEbubble]

Do I have to put my wallet in a certion mode if I put in all algo's in the conf file?
Algo=

"sha" "x11" "x13" "x15" "scrypt" "nist5" "groestle" "pentablake" "whirlpool" "luffa" "keccak" "quark" "bastion

Yes you do
What algo are you going to use?

Not sure yet what algo......but how do you put the wallet in a mode plz?  thx
Do I need gen=1 in the conf file or gen=0 or none at all? thx

Any algo should work because the difficulties are algo-weighted.
I only do CPU mining (algo=bastion); I tried Scrypt with a 20 Mhs ASIC- not doing better than one CPU-PC mining and did not continue.

I bet the rule of thumb is to use the algo your computer system is good at.

Joincoin window wallet client download

https://mega.nz/#!vVFDTDjY!Ch4qv9Kc0cO618nKJexes94Hu3uDL331GZf0eCjAaEw


Only <download through your browser> joincoin-1.3-qt and <run> are needed for you to start and create data files & file folder
(usually @  C:\users\(Active user)\AppData\Roaming\Joincoin\  folder)


and put in Joincoin.conf file to restart. The syncing would start from 56 weeks ago.


It took me less than 30 minutes to sync with my window 7 computer.
    ----------

set gen=1 only if you are doing CPU/wallet mining, i.e. not using external mining softwares.

Again Algorithms and their switches:

algo=

"sha" "x11" "x13" "x15" "scrypt" "nist5" "groestle" "pentablake" "whirlpool" "luffa" "keccak" "quark" "bastion"



Joincoin.conf can be compiled from:
(Fill in rpcuser and rpcpassword and algo; gen=1 for wallet mining)
-----------------------------------------------------------------------
gen=0
listen=1
daemon=1
server=1
rpcuser=
rpcpassword=
rpcallowip=10.1.1.*
rpcport=9150
rpcconnect=127.0.0.1
algo=
addnode=ozkzcn3gp34dx5mp.onion:17941
addnode=sjriwx4jzbwcraqu.onion:17941
addnode=2kfh4763wgviagmk.onion:17941
addnode=zadd56rllxv7pynl.onion:17941
addnode=em6xhxz23p24u5gy.onion:17941
addnode=bw3llynqxcrd5gvq.onion:17941
addnode=gdhtrc7qoh3qowvf.onion:17941
addnode=n5x4ym2ju3dszzqo.onion:17941
----------------------------------------------------------------------
Probably first 8-10 addnodes should be good enough.
You can get more addnodes from http://www.multifaucet.tk/index.php?blockexplorer=J&network_info

[tbearhere]

Really need pools. Wallet mining against all that hash without shares=electricity bill. 

[pjcltd]

Really need pools. Wallet mining against all that hash without shares=electricity bill. 

what also do you want
i can setup a pool for us

[pallas]

Stock sgminer whirlpool algo:

r9 280x (1020 Mhz): ~5 Mh/s
r9 290x (1000 Mhz): ~7 Mh/s

My new miner:

r9 280x (1020 Mhz): ~10 Mh/s
r9 290x (1000 Mhz): ~40 Mh/s

Tahiti still needs work...

I've been able to optimise even more.
new numbers:

r9 280x (1020 Mhz): ~22 Mh/s
r9 290x (1000 Mhz): ~46 Mh/s

[pjcltd]

Stock sgminer whirlpool algo:

r9 280x (1020 Mhz): ~5 Mh/s
r9 290x (1000 Mhz): ~7 Mh/s

My new miner:

r9 280x (1020 Mhz): ~10 Mh/s
r9 290x (1000 Mhz): ~40 Mh/s

Tahiti still needs work...

I've been able to optimise even more.
new numbers:

r9 280x (1020 Mhz): ~22 Mh/s
r9 290x (1000 Mhz): ~46 Mh/s

What OS are you using
And how many blocks are you getting a day?
I would love to get my system running like that

[pallas]

Stock sgminer whirlpool algo:

r9 280x (1020 Mhz): ~5 Mh/s
r9 290x (1000 Mhz): ~7 Mh/s

My new miner:

r9 280x (1020 Mhz): ~10 Mh/s
r9 290x (1000 Mhz): ~40 Mh/s

Tahiti still needs work...

I've been able to optimise even more.
new numbers:

r9 280x (1020 Mhz): ~22 Mh/s
r9 290x (1000 Mhz): ~46 Mh/s

What OS are you using
And how many blocks are you getting a day?
I would love to get my system running like that

Too early to tell how many blocks, will report tomorrow.
I'm on Linux, but I don't think that makes a sensible difference.
That much speed is because I rewrote most of the kernel and enhanced the miner.

[pjcltd]

Really need pools. Wallet mining against all that hash without shares=electricity bill.  

what also do you want
i can setup a pool for us

Hi i can setup the pool for that following alto's
"sha" "x11" "x13" "scrypt"

Never tried to setup on for
"x15"  "nist5" "groestle" "pentablake" "whirlpool" "luffa" "keccak" "quark" "bastion"

but ill give it a go if anyone interested ?

[sp_]

I have optimized the Pentablake for ccminer  (Nvidia Maxwell gpu's)

Hashrates:

750ti: 32MHASH
970: 80MHASH ++
980ti: (I think around 140MHASH but not tested)

This is around 100% faster than the opensource miner.

7 copies have been sold so far.

The miner is for sale for 0.3 BTC

If I sell one more I will release a boost on the gtx 970 (and other compute 5.2 cards.) 85MHASH to the buyers..

[Strannik-74]

I've been able to optimise even more.
new numbers:

r9 280x (1020 Mhz): ~22 Mh/s
r9 290x (1000 Mhz): ~46 Mh/s

What about 270X (Pitcairn)? =)

[pallas]

I've been able to optimise even more.
new numbers:

r9 280x (1020 Mhz): ~22 Mh/s
r9 290x (1000 Mhz): ~46 Mh/s

What about 270X (Pitcairn)? =)

I don't know as I don't own any.
But 280x is 26 Mh/s now...

[pallas]

Stock sgminer whirlpool algo:

r9 280x (1020 Mhz): ~5 Mh/s
r9 290x (1000 Mhz): ~7 Mh/s

My new miner:

r9 280x (1020 Mhz): ~10 Mh/s
r9 290x (1000 Mhz): ~40 Mh/s

Tahiti still needs work...

I've been able to optimise even more.
new numbers:

r9 280x (1020 Mhz): ~22 Mh/s
r9 290x (1000 Mhz): ~46 Mh/s

What OS are you using
And how many blocks are you getting a day?
I would love to get my system running like that

Too early to tell how many blocks, will report tomorrow.
I'm on Linux, but I don't think that makes a sensible difference.
That much speed is because I rewrote most of the kernel and enhanced the miner.

I'm mining Bastion! :3

I know, that's why diff is so high on bastion, wouldn't make sense with CPUs ;-)
I got 16 blocks overnight on whirlpool.