[∞ YH] solo.ckpool.org 2% fee solo mining USA/DE 255 blocks solved!

[-ck]

Hi, what can i do to change the pool's diff.? thanks!

Diff is purely cosmetic on this pool, and ckpool is designed to give you the best diff for your hardware very reliably. However if, for whatever reason, you want to try choosing a diff, you can set a minimum diff if you are running cgminer with the stratum protocol standardised --suggest-diff command which is supported by both current cgminer and ckpool. If you're not using an up to date official cgminer then you are confined to letting the pool choose.

[wmtomlinso]

Mr Kolivas,

I think a tip is well deserved.  forgive me if this is posted elsewhere, what  BTC address should I send a donation to?

It's actually Dr. Kolivas, but I prefer to just be called Con anyway.

Thanks! Any of my usual donation addresses listed in any of my software projects or the pool address are fine. The cgminer address is 15qSxP1SQcUX3o4nhkfdbgyoWEFMomJ4rZ

Thank you again for such a fun, well managed pool!  tip sent...

[daddyfatsax]

Tip sent.

https://www.blocktrail.com/BTC/tx/eed7f47bf00b25bd6d827ffbe03e3ee832c4e4db545655c5006c83821fd8832a

Thanks again -ck.

[-ck]

Tip sent.

https://www.blocktrail.com/BTC/tx/eed7f47bf00b25bd6d827ffbe03e3ee832c4e4db545655c5006c83821fd8832a

Thanks again -ck.

Received with much thanks! Maybe you'll even find more blocks.

[daddyfatsax]

Received with much thanks! Maybe you'll even find more blocks.

A man can dream. 3 blocks in a year with under 10 TH/s is damn lucky. 

[spazzdla]

I am getting a lot of Discarded shares, mining with S3. Is that bad?

[kano]

I am getting a lot of Discarded shares, mining with S3. Is that bad?

Discarded isn't shares. It means almost nothing.

It's work generated inside cgminer and not used.

Though ... Bitmain's choice to set --queue to a silly value will make it high - but in terms of shares it means nothing.

[spazzdla]

I am getting a lot of Discarded shares, mining with S3. Is that bad?

Discarded isn't shares. It means almost nothing.

It's work generated inside cgminer and not used.

Though ... Bitmain's choice to set --queue to a silly value will make it high - but in terms of shares it means nothing.

9 Accepted, 301 discarded :O ?!

Just ignore it?

[-ck]

I am getting a lot of Discarded shares, mining with S3. Is that bad?

Discarded isn't shares. It means almost nothing.

It's work generated inside cgminer and not used.

Though ... Bitmain's choice to set --queue to a silly value will make it high - but in terms of shares it means nothing.

9 Accepted, 301 discarded :O ?!

No biggie?

Read what he said.

[spazzdla]

lol true, kk sweet thx.

[spazzdla]

I am getting a lot of Discarded shares, mining with S3. Is that bad?

Discarded isn't shares. It means almost nothing.

It's work generated inside cgminer and not used.

Though ... Bitmain's choice to set --queue to a silly value will make it high - but in terms of shares it means nothing.

9 Accepted, 301 discarded :O ?!

No biggie?

Read what he said.

I don't get what it all really means in that S3 menu :S.. that accepted, rejected, discarded.  

Pointing an S3 at the pool , go go team luck! lol

[kano]

If you use my S3 update - there is no 'Discarded' on the web page.

I got rid of it from the web coz it's useless information - it has nothing to do with shares - and people (just like you) ask this same question so often that it's best to simply not show it

The 3 numbers related to share counts are DiffA#/Accepted, DiffR#/Rejected an DiffS#/Stale
DiffA#/Accepted is of course accepted by the pool
DiffR#/Rejected is of course rejected by the pool
DiffS#/Stale works correctly on my S3 version (but doesn't on the Bitmain version) and would usually be zero unless something goes wrong with your internet connection and you drop then reconnect to the pool.
(since no one should use --no-submit-stale)

[pepto]

Hi, what can i do to change the pool's diff.? thanks!

Diff is purely cosmetic on this pool, and ckpool is designed to give you the best diff for your hardware very reliably. However if, for whatever reason, you want to try choosing a diff, you can set a minimum diff if you are running cgminer with the stratum protocol standardised --suggest-diff command which is supported by both current cgminer and ckpool. If you're not using an up to date official cgminer then you are confined to letting the pool choose.

It seems to take forever for cgminer to down regulate share difficulty (and only then start hashing) on low HR miners. (a 1.5Gh thumb and two sidehack sticks, the former on my pc and the latter on a minera-cgminer pi).
I was given this to use on the pi- but it doesn't work.
/var/www/minera/minera-bin/cgminerStartupScript: line 4: --suggest-diff: command not found.
I did add a space and a number(80) after 'diff'.
Am I correct that the pool will not down regulate until I find/submit my 1st 1K share? Seems so to me and this can take a long time.

[o_solo_miner]

    I am late... congrats to the last solver!

Somebody put put 1,5 PH on the pool.... saw it while I was observing my Miner wich is stucked at 11.4 Milion
at the moment.

Seem's that someone want to speed it up a bit.

  my 300 GH is faaaaaaaaaaaaaar to smal. 

[hodedowe]

  my 300 GH is faaaaaaaaaaaaaar to smal. 

Nah, you're just fine. Just keep trying and cross those fingers. The last guy only had a few times your hash rate and he had 3 blocks this year.  Good luck!

[carlosmnk]

Hi, what can i do to change the pool's diff.? thanks!

Diff is purely cosmetic on this pool, and ckpool is designed to give you the best diff for your hardware very reliably. However if, for whatever reason, you want to try choosing a diff, you can set a minimum diff if you are running cgminer with the stratum protocol standardised --suggest-diff command which is supported by both current cgminer and ckpool. If you're not using an up to date official cgminer then you are confined to letting the pool choose.

It seems to take forever for cgminer to down regulate share difficulty (and only then start hashing) on low HR miners. (a 1.5Gh thumb and two sidehack sticks, the former on my pc and the latter on a minera-cgminer pi).
I was given this to use on the pi- but it doesn't work.
/var/www/minera/minera-bin/cgminerStartupScript: line 4: --suggest-diff: command not found.
I did add a space and a number(80) after 'diff'.
Am I correct that the pool will not down regulate until I find/submit my 1st 1K share? Seems so to me and this can take a long time.

Now i use cgminer 4.9.2 with the --suggest-dif 2 and it goes great 

[Raimonn]

   I am late... congrats to the last solver!

Somebody put put 1,5 PH on the pool.... saw it while I was observing my Miner wich is stucked at 11.4 Milion
at the moment.

Seem's that someone want to speed it up a bit.

  my 300 GH is faaaaaaaaaaaaaar to smal. 

My miner was 120 Gh only i have less ghs than you. I know that are few possibilities to solve a block this these small amount of ghs, but i believe in luck. I will have to connect more miners to this pool ...

[rimclaw]

my antminer s1 has cgminer   3.12.0-1 is this ok or is there a later version

[thedreamer]

Wow some1 is wasting some serious btc with the current rental. Lol

[o_solo_miner]

my antminer s1 has cgminer   3.12.0-1 is this ok or is there a later version

Well, you can update to Kano's Firmware if you go here:

https://github.com/kanoi/cgminer-binaries/tree/master/AntS1
EDIT: now the correct one

I run the newest Firmware on my S1 and I am verry happy with it.