ThatsMe
Newbie
Offline
Activity: 44
Merit: 0
|
|
November 06, 2014, 06:59:44 AM |
|
Has anyone replaced the insanely loud fans on these units? Im looking for a solution cause the old lady is not going to put up with it all winter.
You could try this.
|
|
|
|
CrazyGuy
Legendary
Offline
Activity: 1973
Merit: 1007
|
|
November 06, 2014, 07:48:36 AM |
|
Is there any type of Rasp Pi image available with a nice web interface for these? Or just use wheezy and cgminer?
CrazyGuy was talking about making a Minera image for the RPi but I do not know where he is on it. Here's my minera fork: https://github.com/crazybitcoinguy/mineraI made minimal modifications to incorporate the ASICMiner and Rockminer cgminer fork, along with build functions for both versions. ckolivas merged in ASICMiner's changes to the main branch a few weeks ago, so I'm not sure why you wouldn't be able to use the standard minera image instead. It's worth a shot if you are looking for something easy. Otherwise, follow the manual installation instructions in the readme. Please note that I've yet to receive any usb-uart adapters, so this is untested with Prismas and Tubes. I have run successfully with 10+ New RBoxes on an RPi. Also, the manual installation method should probably work on other debian based platforms, so feel free to try installing on your cubies and beagle bones. Just make sure you run build_miner.sh after installation on those devices.
|
ASICPuppy.net ASIC Mining Hardware and Accessories - Compac F in stock!
|
|
|
Joebrann
|
|
November 06, 2014, 09:55:34 AM |
|
@Crazy when are you going to have these on Puppy. I am looking to get some asap, I pm'd you but got no response. I dont want to grab the S4s but i am looking at getting them very soon. So i can Roi. Let me know....
|
|
|
|
Blazed
Casascius Addict
Legendary
Offline
Activity: 2128
Merit: 1119
|
|
November 06, 2014, 01:03:03 PM |
|
Is there any type of Rasp Pi image available with a nice web interface for these? Or just use wheezy and cgminer?
CrazyGuy was talking about making a Minera image for the RPi but I do not know where he is on it. Here's my minera fork: https://github.com/crazybitcoinguy/mineraI made minimal modifications to incorporate the ASICMiner and Rockminer cgminer fork, along with build functions for both versions. ckolivas merged in ASICMiner's changes to the main branch a few weeks ago, so I'm not sure why you wouldn't be able to use the standard minera image instead. It's worth a shot if you are looking for something easy. Otherwise, follow the manual installation instructions in the readme. Please note that I've yet to receive any usb-uart adapters, so this is untested with Prismas and Tubes. I have run successfully with 10+ New RBoxes on an RPi. Also, the manual installation method should probably work on other debian based platforms, so feel free to try installing on your cubies and beagle bones. Just make sure you run build_miner.sh after installation on those devices. I will test it with USB and report back. So far nothing I have tried has worked with USB
|
|
|
|
SEGMining
|
|
November 06, 2014, 03:04:01 PM |
|
Has anyone replaced the insanely loud fans on these units? Im looking for a solution cause the old lady is not going to put up with it all winter.
Hosting
|
SEGMINING Miner Co-Location in Vancouver, WA $75/KW/Month with VPN access to your hardware http://segmining.com
|
|
|
SEGMining
|
|
November 06, 2014, 03:12:54 PM |
|
Anyone using the USB adapters? cgminer can not find the miner...so I hot plug and nothing but errors
I have verified with Grapeape I have the dip switches and cables correct. I compiled cgminer-4.7.1 using --enable-blockerupter
I am using latest wheezy on a rasp pi and just tried it using a powered hub with same result.
We have 6 Prismas in our facility all running using the USB adapters, no problems. 5 are plugged into a powered hub then into a laptop. 1 is plugged directly into an RPi. This part may or may not be an actual thing: For me, when I plugged them in via USB, it seemed the board that I was plugging the controller cable into required all the pins to be down. After that it didn't matter the config of the other pins, as long as they were all unique configs. Otherwise it would spit out TONS of errors.
|
SEGMINING Miner Co-Location in Vancouver, WA $75/KW/Month with VPN access to your hardware http://segmining.com
|
|
|
mrpark
|
|
November 06, 2014, 03:20:10 PM |
|
I am using the stock fan, but I've seen a few others using Silverstone Fans and fan controllers. I've had other people tell me to use other types of fans (I have not tried sliverstone) but the question would be what is the average temp of the room? Is the room your miner is in 85F? Are there other miners in the room? I'd recommend trying that fan with a controller if your room is not hot, I have tried many other fans like Corsair etc. and they were not strong enough since I have other miners in the same room. Contact Michcolo, they are very good. Then give your wife the monthly bill It also might help to explain that you are making BTC with the miner, and that noise/heat is money Has anyone replaced the insanely loud fans on these units? Im looking for a solution cause the old lady is not going to put up with it all winter.
|
BTC: 1JDjCGtxtxoZ46XgTqUoXBDxNFKwcsEmik
|
|
|
Blazed
Casascius Addict
Legendary
Offline
Activity: 2128
Merit: 1119
|
|
November 06, 2014, 05:46:37 PM Last edit: November 07, 2014, 06:05:15 AM by Blazedout419 |
|
Still no luck with the USB adapter cgminer just spits out errors (compiled using --enable-blockerupter) [2014-11-06 17:44:02] BET0: Unexpected value 00 received [2014-11-06 17:44:02] BET0: Sync Error [2014-11-06 17:44:02] BET0: Unexpected value 58 received [2014-11-06 17:44:02] BET0: Sync Error [2014-11-06 17:44:02] BET0: Unexpected value 58 received it then segfaults after a little bit.
|
|
|
|
OgNasty
Donator
Legendary
Offline
Activity: 4886
Merit: 4698
Leading Crypto Sports Betting & Casino Platform
|
|
November 06, 2014, 05:54:10 PM |
|
Still no luck with the USB adapter cgminer just spits out errors (compiled using --enable-blockerupter --enable-icarus --without-curses) [2014-11-06 17:44:02] BET0: Unexpected value 00 received [2014-11-06 17:44:02] BET0: Sync Error [2014-11-06 17:44:02] BET0: Unexpected value 58 received [2014-11-06 17:44:02] BET0: Sync Error [2014-11-06 17:44:02] BET0: Unexpected value 58 received it then segfaults after a little bit. That's more progress than me. Mine simply doesn't get detected by cgminer no matter what I try. The USB adapter is the only thing the computer even sees.
|
..Stake.com.. | | | ▄████████████████████████████████████▄ ██ ▄▄▄▄▄▄▄▄▄▄ ▄▄▄▄▄▄▄▄▄▄ ██ ▄████▄ ██ ▀▀▀▀▀▀▀▀▀▀ ██████████ ▀▀▀▀▀▀▀▀▀▀ ██ ██████ ██ ██████████ ██ ██ ██████████ ██ ▀██▀ ██ ██ ██ ██████ ██ ██ ██ ██ ██ ██ ██████ ██ █████ ███ ██████ ██ ████▄ ██ ██ █████ ███ ████ ████ █████ ███ ████████ ██ ████ ████ ██████████ ████ ████ ████▀ ██ ██████████ ▄▄▄▄▄▄▄▄▄▄ ██████████ ██ ██ ▀▀▀▀▀▀▀▀▀▀ ██ ▀█████████▀ ▄████████████▄ ▀█████████▀ ▄▄▄▄▄▄▄▄▄▄▄▄███ ██ ██ ███▄▄▄▄▄▄▄▄▄▄▄▄ ██████████████████████████████████████████ | | | | | | ▄▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▄ █ ▄▀▄ █▀▀█▀▄▄ █ █▀█ █ ▐ ▐▌ █ ▄██▄ █ ▌ █ █ ▄██████▄ █ ▌ ▐▌ █ ██████████ █ ▐ █ █ ▐██████████▌ █ ▐ ▐▌ █ ▀▀██████▀▀ █ ▌ █ █ ▄▄▄██▄▄▄ █ ▌▐▌ █ █▐ █ █ █▐▐▌ █ █▐█ ▀▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▀█ | | | | | | ▄▄█████████▄▄ ▄██▀▀▀▀█████▀▀▀▀██▄ ▄█▀ ▐█▌ ▀█▄ ██ ▐█▌ ██ ████▄ ▄█████▄ ▄████ ████████▄███████████▄████████ ███▀ █████████████ ▀███ ██ ███████████ ██ ▀█▄ █████████ ▄█▀ ▀█▄ ▄██▀▀▀▀▀▀▀██▄ ▄▄▄█▀ ▀███████ ███████▀ ▀█████▄ ▄█████▀ ▀▀▀███▄▄▄███▀▀▀ | | | ..PLAY NOW.. |
|
|
|
Blazed
Casascius Addict
Legendary
Offline
Activity: 2128
Merit: 1119
|
|
November 06, 2014, 10:26:50 PM |
|
I will try 1 board at a time and see what it does
|
|
|
|
SEGMining
|
|
November 06, 2014, 10:43:05 PM |
|
Still no luck with the USB adapter cgminer just spits out errors (compiled using --enable-blockerupter --enable-icarus --without-curses) [2014-11-06 17:44:02] BET0: Unexpected value 00 received [2014-11-06 17:44:02] BET0: Sync Error [2014-11-06 17:44:02] BET0: Unexpected value 58 received [2014-11-06 17:44:02] BET0: Sync Error [2014-11-06 17:44:02] BET0: Unexpected value 58 received it then segfaults after a little bit. That's more progress than me. Mine simply doesn't get detected by cgminer no matter what I try. The USB adapter is the only thing the computer even sees. I'll post the exact working configuration we use a little bit later.
|
SEGMINING Miner Co-Location in Vancouver, WA $75/KW/Month with VPN access to your hardware http://segmining.com
|
|
|
Chris_Sabian
Legendary
Offline
Activity: 896
Merit: 1001
|
|
November 06, 2014, 10:58:26 PM |
|
Still no luck with the USB adapter cgminer just spits out errors (compiled using --enable-blockerupter --enable-icarus --without-curses) [2014-11-06 17:44:02] BET0: Unexpected value 00 received [2014-11-06 17:44:02] BET0: Sync Error [2014-11-06 17:44:02] BET0: Unexpected value 58 received [2014-11-06 17:44:02] BET0: Sync Error [2014-11-06 17:44:02] BET0: Unexpected value 58 received it then segfaults after a little bit. That's more progress than me. Mine simply doesn't get detected by cgminer no matter what I try. The USB adapter is the only thing the computer even sees. I'll post the exact working configuration we use a little bit later. Please do. I have a prisma coming and I would like to get it running as soon as I can
|
|
|
|
Blazed
Casascius Addict
Legendary
Offline
Activity: 2128
Merit: 1119
|
|
November 07, 2014, 01:12:54 AM |
|
Still no luck with the USB adapter cgminer just spits out errors (compiled using --enable-blockerupter --enable-icarus --without-curses) [2014-11-06 17:44:02] BET0: Unexpected value 00 received [2014-11-06 17:44:02] BET0: Sync Error [2014-11-06 17:44:02] BET0: Unexpected value 58 received [2014-11-06 17:44:02] BET0: Sync Error [2014-11-06 17:44:02] BET0: Unexpected value 58 received it then segfaults after a little bit. That's more progress than me. Mine simply doesn't get detected by cgminer no matter what I try. The USB adapter is the only thing the computer even sees. I'll post the exact working configuration we use a little bit later. Thanks! I am trying board by board with no luck so far.
|
|
|
|
CrazyGuy
Legendary
Offline
Activity: 1973
Merit: 1007
|
|
November 07, 2014, 02:33:28 AM |
|
Still no luck with the USB adapter cgminer just spits out errors (compiled using --enable-blockerupter --enable-icarus --without-curses) [2014-11-06 17:44:02] BET0: Unexpected value 00 received [2014-11-06 17:44:02] BET0: Sync Error [2014-11-06 17:44:02] BET0: Unexpected value 58 received [2014-11-06 17:44:02] BET0: Sync Error [2014-11-06 17:44:02] BET0: Unexpected value 58 received it then segfaults after a little bit. That's more progress than me. Mine simply doesn't get detected by cgminer no matter what I try. The USB adapter is the only thing the computer even sees. I'll post the exact working configuration we use a little bit later. Thanks! I am trying board by board with no luck so far. Check out the dip switch diagram in the second post of my group buy thread. The least significant bit is opposite of the tube, so that can lead to some confusion. Also, don't set switch #5 or your boards won't be recognized. I think Sidehack said he couldn't get one running with the main cgminer branch, so make sure you try with ASICMINER'S fork as well.
|
ASICPuppy.net ASIC Mining Hardware and Accessories - Compac F in stock!
|
|
|
Blazed
Casascius Addict
Legendary
Offline
Activity: 2128
Merit: 1119
|
|
November 07, 2014, 02:41:05 AM |
|
Still no luck with the USB adapter cgminer just spits out errors (compiled using --enable-blockerupter --enable-icarus --without-curses) [2014-11-06 17:44:02] BET0: Unexpected value 00 received [2014-11-06 17:44:02] BET0: Sync Error [2014-11-06 17:44:02] BET0: Unexpected value 58 received [2014-11-06 17:44:02] BET0: Sync Error [2014-11-06 17:44:02] BET0: Unexpected value 58 received it then segfaults after a little bit. That's more progress than me. Mine simply doesn't get detected by cgminer no matter what I try. The USB adapter is the only thing the computer even sees. I'll post the exact working configuration we use a little bit later. Thanks! I am trying board by board with no luck so far. Check out the dip switch diagram in the second post of my group buy thread. The least significant bit is opposite of the tube, so that can lead to some confusion. Also, don't set switch #5 or your boards won't be recognized. I think Sidehack said he couldn't get one running with the main cgminer branch, so make sure you try with ASICMINER'S fork as well. I am now trying your build of Minera and using that diagram as "Miner 1" board 1 all switches off etc.. Edit: It sees the miner, but is not hashing...
|
|
|
|
CrazyGuy
Legendary
Offline
Activity: 1973
Merit: 1007
|
|
November 07, 2014, 03:12:37 AM |
|
Looks like you are getting further. Make sure your pool information is setup correctly
|
ASICPuppy.net ASIC Mining Hardware and Accessories - Compac F in stock!
|
|
|
Chris_Sabian
Legendary
Offline
Activity: 896
Merit: 1001
|
|
November 07, 2014, 03:30:13 AM |
|
Could you point these to Bitcoin Core for a try a solo mining / playings the odds? Or does is the hashrate too high for Core to handle without a proxy?
|
|
|
|
Blazed
Casascius Addict
Legendary
Offline
Activity: 2128
Merit: 1119
|
|
November 07, 2014, 03:35:07 AM |
|
Looks like you are getting further. Make sure your pool information is setup correctly
Well I use Minera on several of my Scrypt ASICs so I know for sure my settings are correct. I am assuming this USB adapter is bad. SEGMINING told me his setup via PM and I have followed it exactly with no luck. I looked over every blade and they look just fine physically. I am really not sure what else to try at this point...I need either a known good USB adapter or a BE Controller to see what is up.
|
|
|
|
SEGMining
|
|
November 07, 2014, 05:12:42 AM |
|
After writing this out, I have a question... are you executing cgminer as root/sudo? You have to in linux or you can't access the USB devices. Anyway, here is exactly how we configured a single Prisma that was originally giving us sync errors, etc. All that we did to build cgminer - Note we run 4.7.0 https://github.com/ckolivas/cgminer.git
cd cgminer
./autogen.sh ./configure --enable-blockerupter sudo make
Running cgminer settings inside of our startup script, cgminer.sh Also, its not installed in a path-searchable location right now. #!/bin/bash
URL=<pool url> USER=<pool user> PASS=<pool pass>
cd /path/to/cgminer screen -dmS cgminer \ ./cgminer \ --failover-only \ -o $URL -u $USER -p $PASS
To execute cgminer.sh $ sudo /path/to/cgminer.sh
The hardware configuration is described in my beautiful GNU Paint image here Hope this helps.
|
SEGMINING Miner Co-Location in Vancouver, WA $75/KW/Month with VPN access to your hardware http://segmining.com
|
|
|
Blazed
Casascius Addict
Legendary
Offline
Activity: 2128
Merit: 1119
|
|
November 07, 2014, 06:17:59 AM |
|
Wiped Pi and followed your setup...same errors. This makes 2 times in a row I have been burned buying AM gear. First I bought a tube with a completely dead BE Controller and now this.
|
|
|
|
|