CCminer(SP-MOD) Modded GPU kernels.

[DuvajBalone]

Please report this to moderators https://bitcointalk.org/index.php?topic=2047398.0  fu**ing newbies trying to sell sp_ work

[qwep1]

Please report this to moderators https://bitcointalk.org/index.php?topic=2047398.0  fu**ing newbies trying to sell sp_ work

done

[du44]

I looked for my rigs on 1080 ti's and i see, what speeds in the sp-mod 1 and sp-mod 3 the same after 10+ minutes of work.
sp, i think what you need to buy this gpu for easier tweaking and testing

Does your card trottle? Usually power or temperature related. You can open gpu_z and check the pcap reason. Did you upgrade to the latest driver? 384.97 give a small boost.

Cards doesn't throttle and not more than 70 degrees each. But driver is 382.53... Does 384.97 works good with spreadcoin for example?

[D8V1D]

I looked for my rigs on 1080 ti's and i see, what speeds in the sp-mod 1 and sp-mod 3 the same after 10+ minutes of work.
sp, i think what you need to buy this gpu for easier tweaking and testing

1080 Ti FE - 70% TDP

   Mod 1 - 46 MH/s
Mod 2,3 - 48 MH/s

If you're using Mod 3, make sure to use the latest drivers or you'll lose 0.70 MH/s.

[sp_]

Cards doesn't throttle and not more than 70 degrees each. But driver is 382.53... Does 384.97 works good with spreadcoin for example?

I plan do to a fix in spreadcoin and cryptonite for the latest drivers later. Free update to the donators. I think the crash is caused by buffers that are not alligned correctly. A bug in the driver, but can be fixed by adjusting the code

[dt8666]

Cards doesn't throttle and not more than 70 degrees each. But driver is 382.53... Does 384.97 works good with spreadcoin for example?

I plan do to a fix in spreadcoin and cryptonite for the latest drivers later. Free update to the donators. I think the crash is caused by buffers that are not alligned correctly. A bug in the driver, but can be fixed by adjusting the code

sp. for sigt miner, do i need to update to latest 384.97? I m on 382.53 now.

[sp_]

sp. for sigt miner, do i need to update to latest 384.97? I m on 382.53 now.

yes. if you want more speed.

[Deki1904]

I got problems with ccminer uder win 10... The crash after a while. Win 10 told me this program is not allowed to use GPU...

[Rashkae]

sp_, please check PM

[strannik951159]

I have optimized all hashing algos. But I keep most of my work private in my growing farm..

equihash sp-mod#1  80% tdp.:

Around 440 on the 1070 with 2 threads per gpu.

ewbf 0.3.4b

Gives 490 sol per 1070

To buy a mod you need at least 530 sol with 1070

[Slava_K]

I got problems with ccminer uder win 10... The crash after a while. Win 10 told me this program is not allowed to use GPU...

Make tdp lower on most hot cards, downclock, check psu, make lower overcklock for memory. I have same issues on my home pc with 3x 1080. Make downclock fore middle card and set tdp to 60... Then problem gone away.

[Deki1904]

I got problems with ccminer uder win 10... The crash after a while. Win 10 told me this program is not allowed to use GPU...

Make tdp lower on most hot cards, downclock, check psu, make lower overcklock for memory. I have same issues on my home pc with 3x 1080. Make downclock fore middle card and set tdp to 60... Then problem gone away.

Thanks. It seems it's always 1 card....

One question, is there a tool that restart automatically ccminer if crash and any monitoring tools for win 10 an ccminer?

[Deki1904]

I got problems with ccminer uder win 10... The crash after a while. Win 10 told me this program is not allowed to use GPU...

Make tdp lower on most hot cards, downclock, check psu, make lower overcklock for memory. I have same issues on my home pc with 3x 1080. Make downclock fore middle card and set tdp to 60... Then problem gone away.

Thanks. It seems it's always 1 card....

One question, is there a tool that restart automatically ccminer if crash and any monitoring tools for win 10 an ccminer?

It seems the power limit didn't apply for the cards... Using msi afterburner

[sp_]

I have optimized all hashing algos. But I keep most of my work private in my growing farm..

equihash sp-mod#1  80% tdp.:

Around 440 on the 1070 with 2 threads per gpu.

ewbf 0.3.4b

Gives 490 sol per 1070

To buy a mod you need at least 530 sol with 1070

I don't need to sell this mod.

It's around 14% faster than the opensource dj-ezo solver with the same launch config. I was around the same speed as ewbf 0.3.3b the last time I checked.

[Susch]

Dont need a tool for restart , just edit the bat.

:loop
ccminer.exe -a skunk -o stratum+tcp://....
goto loop

When ccminer crashed , it restarted automatic.

[Deki1904]

Dont need a tool for restart , just edit the bat.

:loop
ccminer.exe -a skunk -o stratum+tcp://....
goto loop

When ccminer crashed , it restarted automatic.

Thanks.

I found the problem.

MSI afterburner power limit set only for one card the tdp. The other show on nvsmi that the other cards still got the same. Don't know what's wrong...

[Gunbit]

SP1 mod was 98,3-1

This is SP3 mod. 20,5 from each card

Rig: 4x Asus ROG STRIX 1060 06gb  + 1 EVGA 1060 reference (shitty card, ruin tottal stats).

pl - 115 , core 125 , mem 500. Anyone got more than 20.5 from 1060 ?

UPD! 102,9 mhs!

[Rashkae]

Hey guys, we're doing a group buy for SP signatum skunk mod #3! We're going in together at 0.01 btc each and we need 2 more people to join! PM if you're interested.

Regards

I hope sp_ blocks all your miners

[Rashkae]

Sigh. I *want* to give sp_ money but by the time he replies, the difficulty will already make it unprofitable LOL

You should set up an automatic web store

[strannik951159]

I have optimized all hashing algos. But I keep most of my work private in my growing farm..

equihash sp-mod#1  80% tdp.:

Around 440 on the 1070 with 2 threads per gpu.

ewbf 0.3.4b

Gives 490 sol per 1070

To buy a mod you need at least 530 sol with 1070

I don't need to sell this mod.

It's around 14% faster than the opensource dj-ezo solver with the same launch config. I was around the same speed as ewbf 0.3.3b the last time I checked.

In free access?