sp_ (OP)
Legendary
Offline
Activity: 2926
Merit: 1087
Team Black developer
|
|
July 28, 2017, 10:47:49 PM |
|
I think I will fix spreadcoin (#12) and cryptonite(#4) on the latest drivers, and then continue with the skunkhash powersaver kernel.
Does it possible in next 2-3 days? Can we expect some hashrate increase? Maybe.
|
|
|
|
strannik951159
Member
Offline
Activity: 112
Merit: 10
📌[ANN]📌👍👍👍
|
|
July 28, 2017, 10:51:13 PM |
|
I think I will fix spreadcoin (#12) and cryptonite(#4) on the latest drivers, and then continue with the skunkhash powersaver kernel.
Does it possible in next 2-3 days? Can we expect some hashrate increase? Maybe. [2017-07-29 01:48:41] NVAPI GPU monitoring enabled. [2017-07-29 01:48:41] Donation mining 3 minutes... [2017-07-29 01:48:41] 4 miner threads started, using 'tribus' algorithm. [2017-07-29 01:48:42] Stratum authentication failed [2017-07-29 01:48:42] ...retry after 5 seconds [2017-07-29 01:48:47] Stratum authentication failed [2017-07-29 01:48:47] Stratum connect timeout, failover... [2017-07-29 01:48:47] Switch to stratum pool yiimp.ccminer.org:8533 [2017-07-29 01:49:04] Stratum difficulty set to 0.125 [2017-07-29 01:49:04] tribus block 100012, diff 1009.639 You have chosen a not very reliable pool for donations
|
📌[ANN]📌👍👍👍 VEGACOIN 👍👍👍 Pow/PoS Tribus Algorithm - Instamine Prevention
|
|
|
strannik951159
Member
Offline
Activity: 112
Merit: 10
📌[ANN]📌👍👍👍
|
|
July 28, 2017, 10:54:37 PM |
|
Why is the speed per pool 100 less than it should miner I watched it constantly 2 hours, on 2 different pools Must be 650 and the pool 550 MH Now I'll try on http://yiimp.ccminer.org
|
📌[ANN]📌👍👍👍 VEGACOIN 👍👍👍 Pow/PoS Tribus Algorithm - Instamine Prevention
|
|
|
bathrobehero
Legendary
Offline
Activity: 2002
Merit: 1051
ICO? Not even once.
|
|
July 28, 2017, 11:52:16 PM |
|
Denarius? Are you kidding me? I setup the wallet 3 weeks ago and it stopped working, cannot update it by some reason, so abandoned it. I have feeling that sp_ is fooling us Not that miners care about stuff like this but DNR is Carsen Klock's newest, soon to be abandoned scamcoin - as it is his signature move after years of not releasing coins or maybe doing so anonymously. Doubt it though, considering his massive ego. He released dozens of shitcoins which he all abandoned after the initial pump... But he certainly evolved from shit like Carsencoin [COCK]: https://bitcointalk.org/index.php?topic=720684.0Please fix power issue on skunk, because cards work very hot without overclocking and eat too much power. What oc settings do you use for 1060/1070 cards? I did 100% Power and -500 mem and 1060s runs ~72c, 1070s from 70 to 84
That means the algo is either ASIC friendly and that it's highly optimized and using the cards to close to their full potential.
|
Not your keys, not your coins!
|
|
|
bensam1231
Legendary
Offline
Activity: 1750
Merit: 1024
|
|
July 28, 2017, 11:55:09 PM |
|
sp_mod 4 , Is the release date roughly known? 2% fee is nice for me, and not so nice for the miners. My work is stolen and resold. What can I do? Increase the price? Only sell to old members with a trackrecord. lock the miner with a key? Claymore and EWFB is doing pretty good with the fee. Another option is a close sale to a a few big farms for many BTC. Then you will never be able to mine because the big farms will harvest all the profit and destroy the coin. This isn't the first time this has happened. I've talked about using fees MULTIPLE times, you just thought you could make more money selling for a flat fee. Now that sales have dropped off, you want to add a dev fee. While I definitely think developers should be paid for your work this is disgustingly greedy SP. You either stick to one model or another. You just look at the nethash everyday and how many people are running your miners and think about how much money you COULDVE made even though you probably already sold a hundred or so copies of your miner. Stick to one model or another SP, you're definitely going to piss off a lot of people (myself included) if you try to fuck people over for more money constantly. The other option is releasing a public FREE version of this with the dev fee and then keep sending out private miners without it to your donators. Yes it will still get leaked, it is the best option though. Choose wisely next time (which is the dev fee and why I've told all the Nvidia developers to use one).
|
I buy private Nvidia miners. Send information and/or inquiries to my PM box.
|
|
|
CjMapope
Legendary
Offline
Activity: 1820
Merit: 1092
~Full-Time Minter since 2016~
|
|
July 29, 2017, 12:05:52 AM |
|
Denarius? Are you kidding me? I setup the wallet 3 weeks ago and it stopped working, cannot update it by some reason, so abandoned it. I have feeling that sp_ is fooling us Not that miners care about stuff like this but DNR is Carsen Klock's newest, soon to be abandoned scamcoin - as it is his signature move after years of not releasing coins or maybe doing so anonymously. Doubt it though, considering his massive ego. He released dozens of shitcoins which he all abandoned after the initial pump... But he certainly evolved from shit like Carsencoin [COCK]: https://bitcointalk.org/index.php?topic=720684.0Please fix power issue on skunk, because cards work very hot without overclocking and eat too much power. What oc settings do you use for 1060/1070 cards? I did 100% Power and -500 mem and 1060s runs ~72c, 1070s from 70 to 84
That means the algo is either ASIC friendly and that it's highly optimized and using the cards to close to their full potential. ya, dont blame SP, he just making money off people with more $$ than math skills hehe His mods are LEGIT, but math may change that daily
|
~Got this girl in my bed, a roof over my head, i mint a couple coins a week, and thats how i make bread~ ~On the 12th day of Hatzvah, OGminer said to me: "compute root of the merkle hash tree!"~ Prohashing -- Simply the best Multipool!
|
|
|
D8V1D
|
|
July 29, 2017, 01:08:28 AM Last edit: July 29, 2017, 01:23:53 AM by D8V1D |
|
7 x 1080 TI FE
0.12 KWh BTC 2775
DNR 0.000150 100% - 819 MH/s 87.6 DNR = $36.46 - 6.03 (2093 watts) = $30.43 per day 70% - 748 MH/s 80.0 DNR = $33.30 - 4.00 (1390 watts) = $29.30 per day
96% of the profit come from the first 70% TDP. People running at 100% are basically wasting 703 watts of electricity. Not including the extra cooling cost to run at 100%.
SIGT 0.000012 70% - 336 MH/s 1220 SIGT = $40.63 - 3.92 (1360 watts) = $36.71 per day
*DNR calculation are ruff estimates based on the earnings from the past 5 hours of mining. Watts are measured from the wall.
|
|
|
|
ESJai
Full Member
Offline
Activity: 131
Merit: 100
I Mine Anything and Everything!
|
|
July 29, 2017, 01:31:31 AM |
|
Two of my rigs keep getting this error: one after about 7 hours, one after 5-10mins. Both are using the latest driver. I tried stock setting but it still occurs. Also tried lower intensity, cuda schedule auto, cpu priority. This is the skunkmod#3. Cuda error in func 'skein512_cpu_setBlock_80' at line 1403 : unknown errorCan anyone help? Thank you!
|
|
|
|
mystere_miner
Member
Offline
Activity: 121
Merit: 10
|
|
July 29, 2017, 01:42:09 AM |
|
Stick to one model or another SP, you're definitely going to piss off a lot of people (myself included) if you try to fuck people over for more money constantly.
I bought the skunk miner 2 days ago, and the price is decreasing, and the difficulty rising faster than I can make up for it. I've literally mined hundreds of coins, and when I look at the current price, I've not made any additional money because the price has been dropping. I'm hoping beyond hope for a bump so I can sell off, but at this rate i'm going to have spent .05BTC with nothing to show for it. Except for losing the funds I would have made if I had just been doing my normal mining, instead of trying t pay back the price of this miner. Now SP wants to charge twice that for the next release? I have no hope of making my money back on the first one.. I'd have to have 20 or 30 miners to actually make a profit.
|
|
|
|
strannik951159
Member
Offline
Activity: 112
Merit: 10
📌[ANN]📌👍👍👍
|
|
July 29, 2017, 01:43:03 AM |
|
Two of my rigs keep getting this error: one after about 7 hours, one after 5-10mins. Both are using the latest driver. I tried stock setting but it still occurs. Also tried lower intensity, cuda schedule auto, cpu priority. This is the skunkmod#3. Cuda error in func 'skein512_cpu_setBlock_80' at line 1403 : unknown errorCan anyone help? Thank you! Overclocking м
|
📌[ANN]📌👍👍👍 VEGACOIN 👍👍👍 Pow/PoS Tribus Algorithm - Instamine Prevention
|
|
|
enochi
Newbie
Offline
Activity: 22
Merit: 0
|
|
July 29, 2017, 01:46:13 AM |
|
7 x 1080 TI FE
0.12 KWh BTC 2775
DNR 0.000150 100% - 819 MH/s 87.6 DNR = $36.46 - 6.03 (2093 watts) = $30.43 per day 70% - 748 MH/s 80.0 DNR = $33.30 - 4.00 (1390 watts) = $29.30 per day
96% of the profit come from the first 70% TDP. People running at 100% are basically wasting 703 watts of electricity. Not including the extra cooling cost to run at 100%.
SIGT 0.000012 70% - 336 MH/s 1220 SIGT = $40.63 - 3.92 (1360 watts) = $36.71 per day
*DNR calculation are ruff estimates based on the earnings from the past 5 hours of mining. Watts are measured from the wall.
so SIGT is still more profitable than the sp's DNR ?
|
|
|
|
mystere_miner
Member
Offline
Activity: 121
Merit: 10
|
|
July 29, 2017, 01:48:31 AM |
|
SIGT 0.000012 70% - 336 MH/s 1220 SIGT = $40.63 - 3.92 (1360 watts) = $36.71 per day
That's about what i'm making, but considering i'd be making ~$20/day mining normally, that means i'm only making ~16/day over what i'd be normally making. That's significant, but I have to pay back the .05BTC I invested in this.. at this rate, which is shrinking hourly it seems.. it will take 15+ days to break even, assuming it doesn't keep dropping in price... and the difficulty doesn't keep going up rapidly. I can't see how the .1 he wants for the tribus miner will ever pay back, much less pay off.. unless you're a HUGE farm. Considering that just since SP released his miner, the price of DNR has dropped by more than half (.00024 a few hours ago, and now less than .0001)
|
|
|
|
joblo
Legendary
Offline
Activity: 1470
Merit: 1114
|
|
July 29, 2017, 01:50:42 AM |
|
Denarius? Are you kidding me? I setup the wallet 3 weeks ago and it stopped working, cannot update it by some reason, so abandoned it. I have feeling that sp_ is fooling us Not that miners care about stuff like this but DNR is Carsen Klock's newest, soon to be abandoned scamcoin - as it is his signature move after years of not releasing coins or maybe doing so anonymously. Doubt it though, considering his massive ego. He released dozens of shitcoins which he all abandoned after the initial pump... But he certainly evolved from shit like Carsencoin [COCK]: https://bitcointalk.org/index.php?topic=720684.0Please fix power issue on skunk, because cards work very hot without overclocking and eat too much power. What oc settings do you use for 1060/1070 cards? I did 100% Power and -500 mem and 1060s runs ~72c, 1070s from 70 to 84
That means the algo is either ASIC friendly and that it's highly optimized and using the cards to close to their full potential. A lot of people get that wrong. A hotter card on ceartain algos means the cuda cores are working hard and aren't waiting on memory. That's a good thing, sort of. Such compute intensive algos are easy to implement in ASIC. The only thing preventing it is demand. All of these algos that reshuffle sha3 functions are likely to get ASICs eventually if the coins that use them are successful. Moving from CPU to GPU to ASIC improves compute performance by orders of magnitude, compare a CPU with 8 cores vs a GPU with 2000. Memory capacity and bandwidth can't keep up with the number of cores on a GPU so on algos that are memory hard the cores sit idle much of the time waiting for data from memory, and consequently run cooler.
|
|
|
|
Slava_K
|
|
July 29, 2017, 01:50:42 AM |
|
Two of my rigs keep getting this error: one after about 7 hours, one after 5-10mins. Both are using the latest driver. I tried stock setting but it still occurs. Also tried lower intensity, cuda schedule auto, cpu priority. This is the skunkmod#3. Cuda error in func 'skein512_cpu_setBlock_80' at line 1403 : unknown errorCan anyone help? Thank you! Don`t use stock settings. Use TDP not more then 90, better 70-80... Undercklocking memory is not necessary. And that's enough.
|
|
|
|
bathrobehero
Legendary
Offline
Activity: 2002
Merit: 1051
ICO? Not even once.
|
|
July 29, 2017, 01:56:48 AM |
|
Denarius? Are you kidding me? I setup the wallet 3 weeks ago and it stopped working, cannot update it by some reason, so abandoned it. I have feeling that sp_ is fooling us Not that miners care about stuff like this but DNR is Carsen Klock's newest, soon to be abandoned scamcoin - as it is his signature move after years of not releasing coins or maybe doing so anonymously. Doubt it though, considering his massive ego. He released dozens of shitcoins which he all abandoned after the initial pump... But he certainly evolved from shit like Carsencoin [COCK]: https://bitcointalk.org/index.php?topic=720684.0Please fix power issue on skunk, because cards work very hot without overclocking and eat too much power. What oc settings do you use for 1060/1070 cards? I did 100% Power and -500 mem and 1060s runs ~72c, 1070s from 70 to 84
That means the algo is either ASIC friendly and that it's highly optimized and using the cards to close to their full potential. ya, dont blame SP, he just making money off people with more $$ than math skills hehe His mods are LEGIT, but math may change that daily Investments are risky and Sp_'s mods are no exceptions. I bought most of them but not all of them. I'll certainly not buy optimizations for tribus. Unfortunately the risk depends on how big ones farm is. For some people 0.05-0.1 is nothing, for others it takes weeks to earn that much making it a bad investment. But then again, a fee only system is very hard to develop - as it was discussed here numerous times.
|
Not your keys, not your coins!
|
|
|
ESJai
Full Member
Offline
Activity: 131
Merit: 100
I Mine Anything and Everything!
|
|
July 29, 2017, 02:00:00 AM |
|
Two of my rigs keep getting this error: one after about 7 hours, one after 5-10mins. Both are using the latest driver. I tried stock setting but it still occurs. Also tried lower intensity, cuda schedule auto, cpu priority. This is the skunkmod#3. Cuda error in func 'skein512_cpu_setBlock_80' at line 1403 : unknown errorCan anyone help? Thank you! Don`t use stock settings. Use TDP not more then 90, better 70-80... Undercklocking memory is not necessary. And that's enough. Of course I would use lower TDP but that gave me the error and that's why I tried stock setting...... I tried both stock memory and lower memory clock, nothing changes. Overclocking м
I just said I also used stock setting and still get the error so overclocking is not the problem.
|
|
|
|
Slava_K
|
|
July 29, 2017, 02:11:07 AM |
|
Two of my rigs keep getting this error: one after about 7 hours, one after 5-10mins. Both are using the latest driver. I tried stock setting but it still occurs. Also tried lower intensity, cuda schedule auto, cpu priority. This is the skunkmod#3. Cuda error in func 'skein512_cpu_setBlock_80' at line 1403 : unknown errorCan anyone help? Thank you! Don`t use stock settings. Use TDP not more then 90, better 70-80... Undercklocking memory is not necessary. And that's enough. Of course I would use lower TDP but that gave me the error and that's why I tried stock setting...... I tried both stock memory and lower memory clock, nothing changes. Overclocking м
I just said I also used stock setting and still get the error so overclocking is not the problem. Test memory, PSU wattage, bios option about 4G limitation - today I have same problem after bios settings failing...
|
|
|
|
ESJai
Full Member
Offline
Activity: 131
Merit: 100
I Mine Anything and Everything!
|
|
July 29, 2017, 02:25:57 AM |
|
Two of my rigs keep getting this error: one after about 7 hours, one after 5-10mins. Both are using the latest driver. I tried stock setting but it still occurs. Also tried lower intensity, cuda schedule auto, cpu priority. This is the skunkmod#3. Cuda error in func 'skein512_cpu_setBlock_80' at line 1403 : unknown errorCan anyone help? Thank you! Don`t use stock settings. Use TDP not more then 90, better 70-80... Undercklocking memory is not necessary. And that's enough. Of course I would use lower TDP but that gave me the error and that's why I tried stock setting...... I tried both stock memory and lower memory clock, nothing changes. Overclocking м
I just said I also used stock setting and still get the error so overclocking is not the problem. Test memory, PSU wattage, bios option about 4G limitation - today I have same problem after bios settings failing... Memory, you mean ram? Wattage isn't the problem Im sure. What is 4G limitation? I've never heard of that. Any links for a reference to it?
|
|
|
|
Garuda55
Newbie
Offline
Activity: 15
Merit: 0
|
|
July 29, 2017, 02:26:51 AM |
|
Why price for skunk cheap then tribus? Denarius will to the moon? but i didnt see that, market order to low just hope sp_ from futere hahaha but im already hopeless, price down 50%
|
|
|
|
ESJai
Full Member
Offline
Activity: 131
Merit: 100
I Mine Anything and Everything!
|
|
July 29, 2017, 02:28:21 AM |
|
Why price for skunk cheap then tribus? Denarius will to the moon? but i didnt see that, market order to low just hope sp_ from futere hahaha but im already hopeless, price down 50% Maybe because people are stealing his work? From the conversations I've been reading in this post(?)
|
|
|
|
|