ANTMINER U3 Discussion and Support Thread

[baazju]

It varies but best practice is to limit it to 3 unless you are more experienced. The guide was written for people who bought U3 from me and have had trouble figuring out how to run 1-3 of them. From my experience people could run 3 on one instance of cgminer using the basic commands without much hit to hashrate or other troubles. That was the same experience I had as well. Of course I personally ran many more than that while doing QA on the batches I've sold, but I used a few workarounds that were a bit out of the scope for the guide.

I do no claim to be experienced in any way, but for the sake of clarity and sharing information I would very much appreciate if you could share your "best practices" as your guide,even though it is very nice" doesn't bring anything not already covered here and in Bitmain's manual.

However, alleged best practices are always welcome even more if they're documented and proved.

I ran 6 (now 5) with no tuning whatsoever, and apart from running them on a modified Antrouter, I've yet to find a magic solution to Zombies (and alleged drop in hash rate over 3 U3)

So, can you please share the fruit of your experience ?

Thank you

Usually I am happy to help out and get people up and running, and I have done so with the numerous miners I've sold and provided support to. But honestly you are coming off as a bit of a dbag and not worth the effort.

[zOU]

Usually I am happy to help out and get people up and running, and I have done so with the numerous miners I've sold and provided support to. But honestly you are coming off as a bit of a dbag and not worth the effort.

please accept my apologies, this wasn't my intention (I thought I was a bit harsh maybe after reading my post)

but I'm a sceptic, so I'm usually pretty careful about people talking about best practice when their own work doesn't differ at all from the official manual (linked here in pdf for your convenience), and you do not even start to hint as to why you're making these claim.

So please, prove me wrong. (and again, I do not mean to offend you, consider me as stupid old grumpy french douchebag if you want  )

[notlist3d]

Usually I am happy to help out and get people up and running, and I have done so with the numerous miners I've sold and provided support to. But honestly you are coming off as a bit of a dbag and not worth the effort.

please accept my apologies, this wasn't my intention (I thought I was a bit harsh maybe after reading my post)

but I'm a sceptic, so I'm usually pretty careful about people talking about best practice when their own work doesn't differ at all from the official manual (linked here in pdf for your convenience), and you do not even start to hint as to why you're making these claim.

So please, prove me wrong. (and again, I do not mean to offend you, consider me as stupid old grumpy french douchebag if you want  )

My lotto mining was a pain with just 3 U3's.  I rebooted them at morning and night when I used a windows host computer.  I could count on at least one zombie if not more then, and they did happen during day it was like babysitting.

My best advice is get a R1 they listed on bitmain's site now.  Use crazy guy's custom firmware on it.    It will automatically restart if one zombies on U3.  In all my time of playing with U3's it is the best solution I found.  Crazy guy did a great job on his custom firmware.

[Mikestang]

I agree, the R1 with Crazyguy's firm ware was the only definitive thing that ever made a difference in my experiences with U3.  They are so random how they behave, different for almost everybody, and even the same unit will behave different for one owner is the same setup.  I had one that wouldn't hash, then it would, then it only would hash with 20% error, then it was fine again and the whole time I never did anything different to it.

[baazju]

Usually I am happy to help out and get people up and running, and I have done so with the numerous miners I've sold and provided support to. But honestly you are coming off as a bit of a dbag and not worth the effort.

please accept my apologies, this wasn't my intention (I thought I was a bit harsh maybe after reading my post)

but I'm a sceptic, so I'm usually pretty careful about people talking about best practice when their own work doesn't differ at all from the official manual (linked here in pdf for your convenience), and you do not even start to hint as to why you're making these claim.

So please, prove me wrong. (and again, I do not mean to offend you, consider me as stupid old grumpy french douchebag if you want  )

No apology needed, trust me you didn't hurt my feelings.

I run linux, and have a few custom scripts I ran with my U3 which honestly are written in a way that probably wouldn't be much use on here. I base my advice on the 3 limit from the feedback I have received from my customers. I don't run any U3 anymore, and sold out my stock. As I mentioned, the guide was written for my customers by myself. Most see the chinese in the bitmain manual and get freaked out. Others don't want to sift through a forum to find their answers.

I don't follow that guide myself because
1. I don't run U3, and when I did it was mainly just 3 via a standard powered USB hub
2. When I did need to run more than 3 it was on linux (which most of my customers don't use) and was highly custom.

If you still have questions than honestly I don't know what to tell you.

[notlist3d]

Usually I am happy to help out and get people up and running, and I have done so with the numerous miners I've sold and provided support to. But honestly you are coming off as a bit of a dbag and not worth the effort.

please accept my apologies, this wasn't my intention (I thought I was a bit harsh maybe after reading my post)

but I'm a sceptic, so I'm usually pretty careful about people talking about best practice when their own work doesn't differ at all from the official manual (linked here in pdf for your convenience), and you do not even start to hint as to why you're making these claim.

So please, prove me wrong. (and again, I do not mean to offend you, consider me as stupid old grumpy french douchebag if you want   )

No apology needed, trust me you didn't hurt my feelings.

I run linux, and have a few custom scripts I ran with my U3 which honestly are written in a way that probably wouldn't be much use on here. I base my advice on the 3 limit from the feedback I have received from my customers. I don't run any U3 anymore, and sold out my stock. As I mentioned, the guide was written for my customers by myself. Most see the chinese in the bitmain manual and get freaked out. Others don't want to sift through a forum to find their answers.

I don't follow that guide myself because
1. I don't run U3, and when I did it was mainly just 3 via a standard powered USB hub
2. When I did need to run more than 3 it was on linux (which most of my customers don't use) and was highly custom.

If you still have questions than honestly I don't know what to tell you.

You can save money on usb hubs if your using U3's no need for a fancy powered hub that is nice.  I know I used a cheap usb 2.0 hub. Since they have power from the bricks, or a PSU in some cases the hub does not need to be powered. 

[baazju]

Usually I am happy to help out and get people up and running, and I have done so with the numerous miners I've sold and provided support to. But honestly you are coming off as a bit of a dbag and not worth the effort.

please accept my apologies, this wasn't my intention (I thought I was a bit harsh maybe after reading my post)

but I'm a sceptic, so I'm usually pretty careful about people talking about best practice when their own work doesn't differ at all from the official manual (linked here in pdf for your convenience), and you do not even start to hint as to why you're making these claim.

So please, prove me wrong. (and again, I do not mean to offend you, consider me as stupid old grumpy french douchebag if you want   )

No apology needed, trust me you didn't hurt my feelings.

I run linux, and have a few custom scripts I ran with my U3 which honestly are written in a way that probably wouldn't be much use on here. I base my advice on the 3 limit from the feedback I have received from my customers. I don't run any U3 anymore, and sold out my stock. As I mentioned, the guide was written for my customers by myself. Most see the chinese in the bitmain manual and get freaked out. Others don't want to sift through a forum to find their answers.

I don't follow that guide myself because
1. I don't run U3, and when I did it was mainly just 3 via a standard powered USB hub
2. When I did need to run more than 3 it was on linux (which most of my customers don't use) and was highly custom.

If you still have questions than honestly I don't know what to tell you.

You can save money on usb hubs if your using U3's no need for a fancy powered hub that is nice.  I know I used a cheap usb 2.0 hub. Since they have power from the bricks, or a PSU in some cases the hub does not need to be powered. 

At the time I was also selling Avalon Nanos and the gs conpacs. So the powered hub was a necessity. Not to mention I have so many usb hubs lying around its a moot point. But you are definitely right, I should add in the guide a powered hub is not necessary.

[notlist3d]

Usually I am happy to help out and get people up and running, and I have done so with the numerous miners I've sold and provided support to. But honestly you are coming off as a bit of a dbag and not worth the effort.

please accept my apologies, this wasn't my intention (I thought I was a bit harsh maybe after reading my post)

but I'm a sceptic, so I'm usually pretty careful about people talking about best practice when their own work doesn't differ at all from the official manual (linked here in pdf for your convenience), and you do not even start to hint as to why you're making these claim.

So please, prove me wrong. (and again, I do not mean to offend you, consider me as stupid old grumpy french douchebag if you want   )

No apology needed, trust me you didn't hurt my feelings.

I run linux, and have a few custom scripts I ran with my U3 which honestly are written in a way that probably wouldn't be much use on here. I base my advice on the 3 limit from the feedback I have received from my customers. I don't run any U3 anymore, and sold out my stock. As I mentioned, the guide was written for my customers by myself. Most see the chinese in the bitmain manual and get freaked out. Others don't want to sift through a forum to find their answers.

I don't follow that guide myself because
1. I don't run U3, and when I did it was mainly just 3 via a standard powered USB hub
2. When I did need to run more than 3 it was on linux (which most of my customers don't use) and was highly custom.

If you still have questions than honestly I don't know what to tell you.

You can save money on usb hubs if your using U3's no need for a fancy powered hub that is nice.  I know I used a cheap usb 2.0 hub. Since they have power from the bricks, or a PSU in some cases the hub does not need to be powered. 

At the time I was also selling Avalon Nanos and the gs conpacs. So the powered hub was a necessity. Not to mention I have so many usb hubs lying around its a moot point. But you are definitely right, I should add in the guide a powered hub is not necessary.

And I know it's not a huge thing.  I just mentioned it as I used unpowered with R1 and worked very well.  And a unpowered usb 2.0 hub works perfect with a R1 setup, and costs a few bucks. 

Also you can use that unpowered 2.0 with RPI as it likes them to.   But I can see your point I to have hub's sitting here if I ever need to use one.

[dsutil]

Hello.

I have two U3 with raspberry powered via PSU standard.

I had got a lot of problem (zombie, low hash,... ) until I compiled de bitmain cgminer version: https://github.com/bitmaintech/cgminer

After compiling and executing that version the U3 works flawlessly, no zombies and stable hashing...

When you say no zombies how long has it been up?  Long term was hat I always had issues with when I had 3, although I don't think I tried that version.

Thanks for sharing though.

I had the antminer u3 from about 2015 august with no zombies at all and very stable hashing.

[notlist3d]

Hello.

I have two U3 with raspberry powered via PSU standard.

I had got a lot of problem (zombie, low hash,... ) until I compiled de bitmain cgminer version: https://github.com/bitmaintech/cgminer

After compiling and executing that version the U3 works flawlessly, no zombies and stable hashing...

When you say no zombies how long has it been up?  Long term was hat I always had issues with when I had 3, although I don't think I tried that version.

Thanks for sharing though.

I had the antminer u3 from about 2015 august with no zombies at all and very stable hashing.

Well you are very lucky and one of very few with out automation.  To be honest it's kinda hard to believe months of it hashing without zombies.   Just most of these did not fair that well with zombies.

[fabiano.dl]

Some one can help me with my U3?
cgminer can't load it.

Follow log

Code:

[2016-02-01 16:44:17] Started cgminer 4.8.0
 [2016-02-01 16:44:17] USB scan devices: checking for BTM devices
 [2016-02-01 16:44:17] RES: thread starting
 [2016-02-01 16:44:18] BTM looking for ICA 067b:2303 but found 10c4:ea60 instead
 [2016-02-01 16:44:18] BTM looking for and found AMU 10c4:ea60
 [2016-02-01 16:44:18] USB lock Bitmain 1-1
 [2016-02-01 16:44:18] RES: Bitmain (1:1) lock=1
 [2016-02-01 16:44:18] USB res lock Bitmain 1-1
 [2016-02-01 16:44:18] RES: Bitmain (1:1) lock ok=1
 [2016-02-01 16:44:18] USB init - AMU device 1:1 usbver=0110 prod='CP2102 USB to UART Bridge Controller' manuf='Silicon Labs' serial='0001'
 [2016-02-01 16:44:18] AMU: cgid 0 EnableUART got err 0
 [2016-02-01 16:44:18] AMU: cgid 0 SetDataCtrl got err 0
 [2016-02-01 16:44:18] AMU: cgid 0 SetBaud got err 4
 [2016-02-01 16:44:18] ---------------------start voltage----------------------
 [2016-02-01 16:44:18] Send voltage aab755c2
 [2016-02-01 16:44:18] Send voltage ok
 [2016-02-01 16:44:18] Device detect freq parameter=0882
 [2016-02-01 16:44:18] Set_frequency cmd_buf[1]{08}cmd_buf[2]{82}
 [2016-02-01 16:44:18] -----------------start freq-------------------
 [2016-02-01 16:44:19] Send frequency 8208821c
 [2016-02-01 16:44:19] Send frequency ok
 [2016-02-01 16:44:20] Send freq getstatus 84000400
 [2016-02-01 16:44:20] AMU0: GetResults (amt=0 err=-7 ern=0)
 [2016-02-01 16:44:20] AMU0: GetResults (amt=0 err=-7 ern=0)
 [2016-02-01 16:44:20] AMU0: GetResults (amt=0 err=-7 ern=10060)
 [2016-02-01 16:44:20] AMU0: GetResults (amt=0 err=-7 ern=10060)
 [2016-02-01 16:44:20] AMU0: GetResults (amt=0 err=-7 ern=10060)
 [2016-02-01 16:44:21] AMU0: GetResults (amt=0 err=-7 ern=10060)
 [2016-02-01 16:44:21] AMU0: GetResults (amt=0 err=-7 ern=10060)
 [2016-02-01 16:44:21] AMU0: GetResults (amt=0 err=-7 ern=10060)
 [2016-02-01 16:44:21] AMU0: GetResults (amt=0 err=-7 ern=10060)
 [2016-02-01 16:44:22] AMU0: GetResults (amt=0 err=-7 ern=10060)
 [2016-02-01 16:44:22] Send freq getstatus ok
 [2016-02-01 16:44:22] AMU0: GetResults (amt=0 err=-7 ern=10060)
 [2016-02-01 16:44:22] AMU0: Read freq Comms timeout (rerr=-7 relen=0)
 [2016-02-01 16:44:22] AMU0: GetResults (amt=0 err=-7 ern=10060)
 [2016-02-01 16:44:22] AMU0: Read freq Comms timeout (rerr=-7 relen=0)
 [2016-02-01 16:44:23] AMU0: GetResults (amt=0 err=-7 ern=10060)
 [2016-02-01 16:44:23] AMU0: Read freq Comms timeout (rerr=-7 relen=0)
 [2016-02-01 16:44:23] AMU0: GetResults (amt=0 err=-7 ern=10060)
 [2016-02-01 16:44:23] AMU0: Read freq Comms timeout (rerr=-7 relen=0)
 [2016-02-01 16:44:24] AMU0: GetResults (amt=0 err=-7 ern=10060)
 [2016-02-01 16:44:24] AMU0: Read freq Comms timeout (rerr=-7 relen=0)
 [2016-02-01 16:44:24] AMU0: GetResults (amt=0 err=-7 ern=10060)
 [2016-02-01 16:44:24] AMU0: Read freq Comms timeout (rerr=-7 relen=0)
 [2016-02-01 16:44:24] Send freq getstatus 84000400
 [2016-02-01 16:44:24] AMU0: GetResults (amt=0 err=-7 ern=10060)
 [2016-02-01 16:44:25] Send freq getstatus ok
 [2016-02-01 16:44:25] AMU0: GetResults (amt=0 err=-7 ern=10060)
 [2016-02-01 16:44:25] AMU0: Read freq Comms timeout (rerr=-7 relen=0)
 [2016-02-01 16:44:25] ------recv freq getstatus no data finish------
 [2016-02-01 16:44:26] -----------------start nonce------------------
 [2016-02-01 16:44:26] Bmsc send golden nonce1
 [2016-02-01 16:44:26] AMU0: GetResults (amt=0 err=-7 ern=10060)
 [2016-02-01 16:44:26] Bmsc Read: No data for 565 ms
 [2016-02-01 16:44:26] Bmsc recv golden nonce timeout
 [2016-02-01 16:44:27] AMU: cgid 0 EnableUART got err 0
 [2016-02-01 16:44:27] AMU: cgid 0 SetDataCtrl got err 0
 [2016-02-01 16:44:27] AMU: cgid 0 SetBaud got err 4
 [2016-02-01 16:44:27] ---------------------start voltage----------------------
 [2016-02-01 16:44:27] Send voltage aab755c2
 [2016-02-01 16:44:27] Send voltage ok
 [2016-02-01 16:44:27] Device detect freq parameter=0882
 [2016-02-01 16:44:27] Set_frequency cmd_buf[1]{08}cmd_buf[2]{82}
 [2016-02-01 16:44:27] -----------------start freq-------------------
 [2016-02-01 16:44:28] Send frequency 8208821c
 [2016-02-01 16:44:28] Send frequency ok
 [2016-02-01 16:44:28] Send freq getstatus 84000400
 [2016-02-01 16:44:28] AMU0: GetResults (amt=0 err=-7 ern=10060)
 [2016-02-01 16:44:29] AMU0: GetResults (amt=0 err=-7 ern=10060)
 [2016-02-01 16:44:29] AMU0: GetResults (amt=0 err=-7 ern=10060)
 [2016-02-01 16:44:30] AMU0: GetResults (amt=0 err=-7 ern=10060)
 [2016-02-01 16:44:30] AMU0: GetResults (amt=0 err=-7 ern=10060)
 [2016-02-01 16:44:30] AMU0: GetResults (amt=0 err=-7 ern=10060)
 [2016-02-01 16:44:31] AMU0: GetResults (amt=0 err=-7 ern=10060)
 [2016-02-01 16:44:31] AMU0: GetResults (amt=0 err=-7 ern=10060)
 [2016-02-01 16:44:31] AMU0: GetResults (amt=0 err=-7 ern=10060)
 [2016-02-01 16:44:31] AMU0: GetResults (amt=0 err=-7 ern=10060)
 [2016-02-01 16:44:32] Send freq getstatus ok
 [2016-02-01 16:44:32] AMU0: GetResults (amt=0 err=-7 ern=10060)
 [2016-02-01 16:44:32] AMU0: Read freq Comms timeout (rerr=-7 relen=0)
 [2016-02-01 16:44:32] AMU0: GetResults (amt=0 err=-7 ern=10060)
 [2016-02-01 16:44:32] AMU0: Read freq Comms timeout (rerr=-7 relen=0)
 [2016-02-01 16:44:33] AMU0: GetResults (amt=0 err=-7 ern=10060)
 [2016-02-01 16:44:33] AMU0: Read freq Comms timeout (rerr=-7 relen=0)
 [2016-02-01 16:44:33] AMU0: GetResults (amt=0 err=-7 ern=10060)
 [2016-02-01 16:44:33] AMU0: Read freq Comms timeout (rerr=-7 relen=0)
 [2016-02-01 16:44:33] AMU0: GetResults (amt=0 err=-7 ern=10060)
 [2016-02-01 16:44:33] AMU0: Read freq Comms timeout (rerr=-7 relen=0)
 [2016-02-01 16:44:34] AMU0: GetResults (amt=0 err=-7 ern=10060)
 [2016-02-01 16:44:34] AMU0: Read freq Comms timeout (rerr=-7 relen=0)
 [2016-02-01 16:44:34] ------recv freq getstatus no data finish------
 [2016-02-01 16:44:35] -----------------start nonce------------------
 [2016-02-01 16:44:35] Bmsc send golden nonce1
 [2016-02-01 16:44:35] AMU0: GetResults (amt=0 err=-7 ern=10060)
 [2016-02-01 16:44:35] Bmsc Read: No data for 709 ms
 [2016-02-01 16:44:36] Bmsc recv golden nonce timeout
 [2016-02-01 16:44:36] USB uninit AMU0
 [2016-02-01 16:44:36] USB free AMU
 [2016-02-01 16:44:36] USB unlock Bitmain 1-1
 [2016-02-01 16:44:36] BTM looking for ICA 067b:2303 but found 8086:265c instead
 [2016-02-01 16:44:36] RES: Bitmain (1:1) lock=0
 [2016-02-01 16:44:36] BTM looking for AMU 10c4:ea60 but found 8086:265c instead
 [2016-02-01 16:44:36] USB res unlock Bitmain 1-1
 [2016-02-01 16:44:36] BTM looking for ANU 10c4:ea60 but found 8086:265c instead
 [2016-02-01 16:44:36] BTM looking for BLT 0403:6001 but found 8086:265c instead
 [2016-02-01 16:44:36] BTM looking for LLT 0403:6001 but found 8086:265c instead
 [2016-02-01 16:44:36] BTM looking for CMR 0403:6014 but found 8086:265c instead
 [2016-02-01 16:44:36] BTM looking for CMR 0403:8350 but found 8086:265c instead
 [2016-02-01 16:44:36] BTM looking for ICA 067b:2303 but found 203a:fffa instead
 [2016-02-01 16:44:36] BTM looking for AMU 10c4:ea60 but found 203a:fffa instead
 [2016-02-01 16:44:36] BTM looking for ANU 10c4:ea60 but found 203a:fffa instead
 [2016-02-01 16:44:36] BTM looking for BLT 0403:6001 but found 203a:fffa instead
 [2016-02-01 16:44:36] BTM looking for LLT 0403:6001 but found 203a:fffa instead
 [2016-02-01 16:44:36] BTM looking for CMR 0403:6014 but found 203a:fffa instead
 [2016-02-01 16:44:36] BTM looking for CMR 0403:8350 but found 203a:fffa instead
 [2016-02-01 16:44:36] BTM looking for ICA 067b:2303 but found 203a:fffc instead
 [2016-02-01 16:44:36] BTM looking for AMU 10c4:ea60 but found 203a:fffc instead
 [2016-02-01 16:44:36] BTM looking for ANU 10c4:ea60 but found 203a:fffc instead
 [2016-02-01 16:44:36] BTM looking for BLT 0403:6001 but found 203a:fffc instead
 [2016-02-01 16:44:36] BTM looking for LLT 0403:6001 but found 203a:fffc instead
 [2016-02-01 16:44:36] BTM looking for CMR 0403:6014 but found 203a:fffc instead
 [2016-02-01 16:44:36] BTM looking for CMR 0403:8350 but found 203a:fffc instead
 [2016-02-01 16:44:36] BTM looking for ICA 067b:2303 but found 1033:0194 instead
 [2016-02-01 16:44:36] BTM looking for AMU 10c4:ea60 but found 1033:0194 instead
 [2016-02-01 16:44:36] BTM looking for ANU 10c4:ea60 but found 1033:0194 instead
 [2016-02-01 16:44:36] BTM looking for BLT 0403:6001 but found 1033:0194 instead
 [2016-02-01 16:44:36] BTM looking for LLT 0403:6001 but found 1033:0194 instead
 [2016-02-01 16:44:36] BTM looking for CMR 0403:6014 but found 1033:0194 instead
 [2016-02-01 16:44:36] BTM looking for CMR 0403:8350 but found 1033:0194 instead
 [2016-02-01 16:44:36] BTM looking for ICA 067b:2303 but found 8086:2658 instead
 [2016-02-01 16:44:36] BTM looking for AMU 10c4:ea60 but found 8086:2658 instead
 [2016-02-01 16:44:36] BTM looking for ANU 10c4:ea60 but found 8086:2658 instead
 [2016-02-01 16:44:36] BTM looking for BLT 0403:6001 but found 8086:2658 instead
 [2016-02-01 16:44:36] BTM looking for LLT 0403:6001 but found 8086:2658 instead
 [2016-02-01 16:44:36] BTM looking for CMR 0403:6014 but found 8086:2658 instead
 [2016-02-01 16:44:36] BTM looking for CMR 0403:8350 but found 8086:2658 instead
 [2016-02-01 16:44:36] BTM looking for ICA 067b:2303 but found 203a:fff9 instead
 [2016-02-01 16:44:36] BTM looking for AMU 10c4:ea60 but found 203a:fff9 instead
 [2016-02-01 16:44:36] BTM looking for ANU 10c4:ea60 but found 203a:fff9 instead
 [2016-02-01 16:44:36] BTM looking for BLT 0403:6001 but found 203a:fff9 instead
 [2016-02-01 16:44:36] BTM looking for LLT 0403:6001 but found 203a:fff9 instead
 [2016-02-01 16:44:36] BTM looking for CMR 0403:6014 but found 203a:fff9 instead
 [2016-02-01 16:44:36] BTM looking for CMR 0403:8350 but found 203a:fff9 instead
 [2016-02-01 16:44:36] BTM looking for ICA 067b:2303 but found 203a:fff9 instead
 [2016-02-01 16:44:36] BTM looking for AMU 10c4:ea60 but found 203a:fff9 instead
 [2016-02-01 16:44:36] BTM looking for ANU 10c4:ea60 but found 203a:fff9 instead
 [2016-02-01 16:44:36] BTM looking for BLT 0403:6001 but found 203a:fff9 instead
 [2016-02-01 16:44:36] BTM looking for LLT 0403:6001 but found 203a:fff9 instead
 [2016-02-01 16:44:36] BTM looking for CMR 0403:6014 but found 203a:fff9 instead
 [2016-02-01 16:44:36] BTM looking for CMR 0403:8350 but found 203a:fff9 instead
 [2016-02-01 16:44:36] BTM looking for ICA 067b:2303 but found 203a:fffa instead
 [2016-02-01 16:44:36] BTM looking for AMU 10c4:ea60 but found 203a:fffa instead
 [2016-02-01 16:44:36] BTM looking for ANU 10c4:ea60 but found 203a:fffa instead
 [2016-02-01 16:44:36] BTM looking for BLT 0403:6001 but found 203a:fffa instead
 [2016-02-01 16:44:36] BTM looking for LLT 0403:6001 but found 203a:fffa instead
 [2016-02-01 16:44:36] BTM looking for CMR 0403:6014 but found 203a:fffa instead
 [2016-02-01 16:44:36] BTM looking for CMR 0403:8350 but found 203a:fffa instead
 [2016-02-01 16:44:36] BTM looking for ICA 067b:2303 but found 203a:fffc instead
 [2016-02-01 16:44:36] BTM looking for AMU 10c4:ea60 but found 203a:fffc instead
 [2016-02-01 16:44:36] BTM looking for ANU 10c4:ea60 but found 203a:fffc instead
 [2016-02-01 16:44:36] BTM looking for BLT 0403:6001 but found 203a:fffc instead
 [2016-02-01 16:44:36] BTM looking for LLT 0403:6001 but found 203a:fffc instead
 [2016-02-01 16:44:36] BTM looking for CMR 0403:6014 but found 203a:fffc instead
 [2016-02-01 16:44:36] BTM looking for CMR 0403:8350 but found 203a:fffc instead
 [2016-02-01 16:44:36] BTM looking for ICA 067b:2303 but found 203a:fff9 instead
 [2016-02-01 16:44:36] BTM looking for AMU 10c4:ea60 but found 203a:fff9 instead
 [2016-02-01 16:44:36] BTM looking for ANU 10c4:ea60 but found 203a:fff9 instead
 [2016-02-01 16:44:36] BTM looking for BLT 0403:6001 but found 203a:fff9 instead
 [2016-02-01 16:44:36] BTM looking for LLT 0403:6001 but found 203a:fff9 instead
 [2016-02-01 16:44:36] BTM looking for CMR 0403:6014 but found 203a:fff9 instead
 [2016-02-01 16:44:36] BTM looking for CMR 0403:8350 but found 203a:fff9 instead
 [2016-02-01 16:44:36] BTM looking for ICA 067b:2303 but found 203a:fffa instead
 [2016-02-01 16:44:36] BTM looking for AMU 10c4:ea60 but found 203a:fffa instead
 [2016-02-01 16:44:36] BTM looking for ANU 10c4:ea60 but found 203a:fffa instead
 [2016-02-01 16:44:36] BTM looking for BLT 0403:6001 but found 203a:fffa instead
 [2016-02-01 16:44:36] BTM looking for LLT 0403:6001 but found 203a:fffa instead
 [2016-02-01 16:44:36] BTM looking for CMR 0403:6014 but found 203a:fffa instead
 [2016-02-01 16:44:36] BTM looking for CMR 0403:8350 but found 203a:fffa instead
 [2016-02-01 16:44:36] No devices detected!
 [2016-02-01 16:44:36] Waiting for USB hotplug devices or press q to quit
 [2016-02-01 16:44:36] Probing for an alive pool
 [2016-02-01 16:44:36] Testing pool stratum+tcp://stratum.antpool.com:3336
 [2016-02-01 16:44:36] Testing pool stratum+tcp://p2p.antpool.com:25
 [2016-02-01 16:44:37] Select timeout/failed connect
 [2016-02-01 16:44:37] Failed to connect to stratum on p2p.antpool.com:25
 [2016-02-01 16:44:37] Initiate stratum failed
 [2016-02-01 16:44:37] Select timeout/failed connect
 [2016-02-01 16:44:38] Select timeout/failed connect
 [2016-02-01 16:44:38] Failed to connect to stratum on stratum.antpool.com:3336
 [2016-02-01 16:44:38] Initiate stratum failed
 [2016-02-01 16:44:42] Testing pool stratum+tcp://p2p.antpool.com:25
 [2016-02-01 16:44:43] Select timeout/failed connect
 [2016-02-01 16:44:43] Failed to connect to stratum on p2p.antpool.com:25
 [2016-02-01 16:44:43] Initiate stratum failed
 [2016-02-01 16:44:43] Testing pool stratum+tcp://stratum.antpool.com:3336
 [2016-02-01 16:44:44] Select timeout/failed connect
 [2016-02-01 16:44:45] Select timeout/failed connect
 [2016-02-01 16:44:45] Failed to connect to stratum on stratum.antpool.com:3336
 [2016-02-01 16:44:45] Initiate stratum failed

Really thanks for help!

[Mikestang]

Some one can help me with my U3?
cgminer can't load it.

Did you run zadig?  Did it install the driver properly?  Can you see the U3 in your device manager?

Use the latest release of cgminer, 4.9.2.

[zOU]

[2016-02-01 16:44:17] Started cgminer 4.8.0

use 4.9.2

[fabiano.dl]

Some one can help me with my U3?
cgminer can't load it.

Did you run zadig?  Did it install the driver properly?  Can you see the U3 in your device manager?

Use the latest release of cgminer, 4.9.2.

zadig = yes
Did it install the driver properly = i hope so
Can you see the U3 in your device manager = yes

Follow bellow log listing drivers and using CGIMiner 4.9.2 thanks for help!!

Code:

PS C:\Users\fabia> gwmi Win32_USBControllerDevice |%{[wmi]($_.Dependent)} | Sort Description,DeviceID | ft Description,D
eviceID -auto

Description                          DeviceID
-----------                          --------
CP2102 USB to UART Bridge Controller USB\VID_10C4&PID_EA60\0001
Generic USB Hub                      USB\VID_1A40&PID_0101\6&1464158D&0&2
Generic USB Hub                      USB\VID_8087&PID_0024\5&353609BF&0&1
Generic USB Hub                      USB\VID_8087&PID_0024\5&7DF0F0E&0&1
USB Root Hub                         USB\ROOT_HUB20\4&69E0C5A&0
USB Root Hub                         USB\ROOT_HUB20\4&BAA89A0&0

                                                                                                                      

Code:

 [2016-02-03 20:34:49] Started cgminer 4.9.2
 [2016-02-03 20:34:49] USB scan devices: checking for AVA devices
 [2016-02-03 20:34:49] RES: thread starting
 [2016-02-03 20:34:49] AVA looking for BTB 0403:6001 but found 10c4:ea60 instead
 [2016-02-03 20:34:49] AVA looking for BBF 0403:6001 but found 10c4:ea60 instead
 [2016-02-03 20:34:49] AVA looking for AVA 0403:6001 but found 10c4:ea60 instead
 [2016-02-03 20:34:49] AVA looking for BTB 0403:6001 but found 8087:0024 instead
 [2016-02-03 20:34:49] AVA looking for BBF 0403:6001 but found 8087:0024 instead
 [2016-02-03 20:34:49] AVA looking for AVA 0403:6001 but found 8087:0024 instead
 [2016-02-03 20:34:49] AVA looking for BTB 0403:6001 but found 8086:1c2d instead
 [2016-02-03 20:34:49] AVA looking for BBF 0403:6001 but found 8086:1c2d instead
 [2016-02-03 20:34:49] AVA looking for AVA 0403:6001 but found 8086:1c2d instead
 [2016-02-03 20:34:49] AVA looking for BTB 0403:6001 but found 8087:0024 instead
 [2016-02-03 20:34:49] AVA looking for BBF 0403:6001 but found 8087:0024 instead
 [2016-02-03 20:34:49] AVA looking for AVA 0403:6001 but found 8087:0024 instead
 [2016-02-03 20:34:49] AVA looking for BTB 0403:6001 but found 1a40:0101 instead
 [2016-02-03 20:34:49] AVA looking for BBF 0403:6001 but found 1a40:0101 instead
 [2016-02-03 20:34:49] AVA looking for AVA 0403:6001 but found 1a40:0101 instead
 [2016-02-03 20:34:49] AVA looking for BTB 0403:6001 but found 8086:1c26 instead
 [2016-02-03 20:34:49] AVA looking for BBF 0403:6001 but found 8086:1c26 instead
 [2016-02-03 20:34:49] AVA looking for AVA 0403:6001 but found 8086:1c26 instead
 [2016-02-03 20:34:49] USB scan devices: checking for AV2 devices
 [2016-02-03 20:34:50] AV2 looking for AV2 067b:2303 but found 10c4:ea60 instead
 [2016-02-03 20:34:50] AV2 looking for AV2 067b:2303 but found 8087:0024 instead
 [2016-02-03 20:34:50] AV2 looking for AV2 067b:2303 but found 8086:1c2d instead
 [2016-02-03 20:34:50] AV2 looking for AV2 067b:2303 but found 8087:0024 instead
 [2016-02-03 20:34:50] AV2 looking for AV2 067b:2303 but found 1a40:0101 instead
 [2016-02-03 20:34:50] AV2 looking for AV2 067b:2303 but found 8086:1c26 instead
 [2016-02-03 20:34:50] USB scan devices: checking for AV4 devices
 [2016-02-03 20:34:50] AV4 looking for AV4 29f1:33f2 but found 10c4:ea60 instead
 [2016-02-03 20:34:50] AV4 looking for AV4 29f1:33f2 but found 8087:0024 instead
 [2016-02-03 20:34:50] AV4 looking for AV4 29f1:33f2 but found 8086:1c2d instead
 [2016-02-03 20:34:50] AV4 looking for AV4 29f1:33f2 but found 8087:0024 instead
 [2016-02-03 20:34:50] AV4 looking for AV4 29f1:33f2 but found 1a40:0101 instead
 [2016-02-03 20:34:50] AV4 looking for AV4 29f1:33f2 but found 8086:1c26 instead
 [2016-02-03 20:34:50] USB scan devices: checking for BAS devices
 [2016-02-03 20:34:50] BAS looking for BAS 0403:6014 but found 10c4:ea60 instead
 [2016-02-03 20:34:50] BAS looking for BAS 0403:6014 but found 10c4:ea60 instead
 [2016-02-03 20:34:50] BAS looking for BMA 0403:6014 but found 10c4:ea60 instead
 [2016-02-03 20:34:50] BAS looking for BMA 0403:6014 but found 10c4:ea60 instead
 [2016-02-03 20:34:50] BAS looking for BMA 0403:6014 but found 10c4:ea60 instead
 [2016-02-03 20:34:50] BAS looking for BAS 0403:6014 but found 8087:0024 instead
 [2016-02-03 20:34:50] BAS looking for BAS 0403:6014 but found 8087:0024 instead
 [2016-02-03 20:34:50] BAS looking for BMA 0403:6014 but found 8087:0024 instead
 [2016-02-03 20:34:50] BAS looking for BMA 0403:6014 but found 8087:0024 instead
 [2016-02-03 20:34:50] BAS looking for BMA 0403:6014 but found 8087:0024 instead
 [2016-02-03 20:34:50] BAS looking for BAS 0403:6014 but found 8086:1c2d instead
 [2016-02-03 20:34:50] BAS looking for BAS 0403:6014 but found 8086:1c2d instead
 [2016-02-03 20:34:50] BAS looking for BMA 0403:6014 but found 8086:1c2d instead
 [2016-02-03 20:34:50] BAS looking for BMA 0403:6014 but found 8086:1c2d instead
 [2016-02-03 20:34:50] BAS looking for BMA 0403:6014 but found 8086:1c2d instead
 [2016-02-03 20:34:50] BAS looking for BAS 0403:6014 but found 8087:0024 instead
 [2016-02-03 20:34:50] BAS looking for BAS 0403:6014 but found 8087:0024 instead
 [2016-02-03 20:34:50] BAS looking for BMA 0403:6014 but found 8087:0024 instead
 [2016-02-03 20:34:50] BAS looking for BMA 0403:6014 but found 8087:0024 instead
 [2016-02-03 20:34:50] BAS looking for BMA 0403:6014 but found 8087:0024 instead
 [2016-02-03 20:34:50] BAS looking for BAS 0403:6014 but found 1a40:0101 instead
 [2016-02-03 20:34:50] BAS looking for BAS 0403:6014 but found 1a40:0101 instead
 [2016-02-03 20:34:50] BAS looking for BMA 0403:6014 but found 1a40:0101 instead
 [2016-02-03 20:34:50] BAS looking for BMA 0403:6014 but found 1a40:0101 instead
 [2016-02-03 20:34:50] BAS looking for BMA 0403:6014 but found 1a40:0101 instead
 [2016-02-03 20:34:50] BAS looking for BAS 0403:6014 but found 8086:1c26 instead
 [2016-02-03 20:34:50] BAS looking for BAS 0403:6014 but found 8086:1c26 instead
 [2016-02-03 20:34:50] BAS looking for BMA 0403:6014 but found 8086:1c26 instead
 [2016-02-03 20:34:50] BAS looking for BMA 0403:6014 but found 8086:1c26 instead
 [2016-02-03 20:34:50] BAS looking for BMA 0403:6014 but found 8086:1c26 instead
 [2016-02-03 20:34:50] USB scan devices: checking for BF1 devices
 [2016-02-03 20:34:50] BF1 looking for BF1 03eb:204b but found 10c4:ea60 instead
 [2016-02-03 20:34:50] BF1 looking for BXF 198c:b1f1 but found 10c4:ea60 instead
 [2016-02-03 20:34:50] BF1 looking for OSM 198c:b1f1 but found 10c4:ea60 instead
 [2016-02-03 20:34:50] BF1 looking for NFU 04d8:00de but found 10c4:ea60 instead
 [2016-02-03 20:34:50] BF1 looking for BXM 0403:6014 but found 10c4:ea60 instead
 [2016-02-03 20:34:50] BF1 looking for BF1 03eb:204b but found 8087:0024 instead
 [2016-02-03 20:34:50] BF1 looking for BXF 198c:b1f1 but found 8087:0024 instead
 [2016-02-03 20:34:50] BF1 looking for OSM 198c:b1f1 but found 8087:0024 instead
 [2016-02-03 20:34:50] BF1 looking for NFU 04d8:00de but found 8087:0024 instead
 [2016-02-03 20:34:50] BF1 looking for BXM 0403:6014 but found 8087:0024 instead
 [2016-02-03 20:34:50] BF1 looking for BF1 03eb:204b but found 8086:1c2d instead
 [2016-02-03 20:34:50] BF1 looking for BXF 198c:b1f1 but found 8086:1c2d instead
 [2016-02-03 20:34:50] BF1 looking for OSM 198c:b1f1 but found 8086:1c2d instead
 [2016-02-03 20:34:50] BF1 looking for NFU 04d8:00de but found 8086:1c2d instead
 [2016-02-03 20:34:50] BF1 looking for BXM 0403:6014 but found 8086:1c2d instead
 [2016-02-03 20:34:50] BF1 looking for BF1 03eb:204b but found 8087:0024 instead
 [2016-02-03 20:34:50] BF1 looking for BXF 198c:b1f1 but found 8087:0024 instead
 [2016-02-03 20:34:50] BF1 looking for OSM 198c:b1f1 but found 8087:0024 instead
 [2016-02-03 20:34:50] BF1 looking for NFU 04d8:00de but found 8087:0024 instead
 [2016-02-03 20:34:50] BF1 looking for BXM 0403:6014 but found 8087:0024 instead
 [2016-02-03 20:34:50] BF1 looking for BF1 03eb:204b but found 1a40:0101 instead
 [2016-02-03 20:34:50] BF1 looking for BXF 198c:b1f1 but found 1a40:0101 instead
 [2016-02-03 20:34:50] BF1 looking for OSM 198c:b1f1 but found 1a40:0101 instead
 [2016-02-03 20:34:50] BF1 looking for NFU 04d8:00de but found 1a40:0101 instead
 [2016-02-03 20:34:50] BF1 looking for BXM 0403:6014 but found 1a40:0101 instead
 [2016-02-03 20:34:50] BF1 looking for BF1 03eb:204b but found 8086:1c26 instead
 [2016-02-03 20:34:50] BF1 looking for BXF 198c:b1f1 but found 8086:1c26 instead
 [2016-02-03 20:34:50] BF1 looking for OSM 198c:b1f1 but found 8086:1c26 instead
 [2016-02-03 20:34:50] BF1 looking for NFU 04d8:00de but found 8086:1c26 instead
 [2016-02-03 20:34:50] BF1 looking for BXM 0403:6014 but found 8086:1c26 instead
 [2016-02-03 20:34:50] USB scan devices: checking for CTA devices
 [2016-02-03 20:34:50] CTA looking for CTA 1cbe:0003 but found 10c4:ea60 instead
 [2016-02-03 20:34:50] CTA looking for CTA 1cbe:0003 but found 8087:0024 instead
 [2016-02-03 20:34:50] CTA looking for CTA 1cbe:0003 but found 8086:1c2d instead
 [2016-02-03 20:34:50] CTA looking for CTA 1cbe:0003 but found 8087:0024 instead
 [2016-02-03 20:34:50] CTA looking for CTA 1cbe:0003 but found 1a40:0101 instead
 [2016-02-03 20:34:50] CTA looking for CTA 1cbe:0003 but found 8086:1c26 instead
 [2016-02-03 20:34:50] USB scan devices: checking for HFA devices
 [2016-02-03 20:34:50] HFA looking for HFA 297c:0001 but found 10c4:ea60 instead
 [2016-02-03 20:34:50] HFA looking for HFA 297c:0001 but found 8087:0024 instead
 [2016-02-03 20:34:50] HFA looking for HFA 297c:0001 but found 8086:1c2d instead
 [2016-02-03 20:34:50] HFA looking for HFA 297c:0001 but found 8087:0024 instead
 [2016-02-03 20:34:50] HFA looking for HFA 297c:0001 but found 1a40:0101 instead
 [2016-02-03 20:34:50] HFA looking for HFA 297c:0001 but found 8086:1c26 instead
 [2016-02-03 20:34:50] USB scan devices: checking for HRO devices
 [2016-02-03 20:34:51] HRO looking for HRO 0403:6001 but found 10c4:ea60 instead
 [2016-02-03 20:34:51] HRO looking for HRO 0403:6001 but found 8087:0024 instead
 [2016-02-03 20:34:51] HRO looking for HRO 0403:6001 but found 8086:1c2d instead
 [2016-02-03 20:34:51] HRO looking for HRO 0403:6001 but found 8087:0024 instead
 [2016-02-03 20:34:51] HRO looking for HRO 0403:6001 but found 1a40:0101 instead
 [2016-02-03 20:34:51] HRO looking for HRO 0403:6001 but found 8086:1c26 instead
 [2016-02-03 20:34:51] USB scan devices: checking for ICA devices
 [2016-02-03 20:34:51] ICA looking for ICA 067b:2303 but found 10c4:ea60 instead
 [2016-02-03 20:34:51] ICA looking for ICA 1fc9:0083 but found 10c4:ea60 instead
 [2016-02-03 20:34:51] ICA looking for and found AMU 10c4:ea60
 [2016-02-03 20:34:51] USB lock Icarus 1-2
 [2016-02-03 20:34:51] RES: Icarus (1:2) lock=1
 [2016-02-03 20:34:51] USB res lock Icarus 1-2
 [2016-02-03 20:34:51] RES: Icarus (1:2) lock ok=1
 [2016-02-03 20:34:51] USB init - AMU device 1:2 usbver=0110 prod='CP2102 USB to UART Bridge Controller' manuf='Silicon Labs' serial='0001'
 [2016-02-03 20:34:51] AMU 0: send_gold_nonce 4a548fe471fa3a9a1371144556c3f64d2500b4826008fe4bbf7698c94eba794600000000000000000000000000000000aa1ff055ce22a72f4f6726141a0b3287
 [2016-02-03 20:34:51] AMU: cgid 0 EnableUART got err 0
 [2016-02-03 20:34:51] AMU: cgid 0 SetDataCtrl got err 0
 [2016-02-03 20:34:51] AMU: cgid 0 SetBaud got err 4
 [2016-02-03 20:34:51] tries: 3
 [2016-02-03 20:34:51] AMU0: GetResults (amt=0 err=-7 ern=16)
 [2016-02-03 20:34:51] Icarus Read: No data for 101 ms
 [2016-02-03 20:34:51] Rockminer nonce_bin: 00 00 00 00 00 00 00 00
 [2016-02-03 20:34:51] detect_one get_gold_nonce error, tries = 3
 [2016-02-03 20:34:51] AMU: cgid 0 EnableUART got err 0
 [2016-02-03 20:34:51] AMU: cgid 0 SetDataCtrl got err 0
 [2016-02-03 20:34:51] AMU: cgid 0 SetBaud got err 4
 [2016-02-03 20:34:51] tries: 2
 [2016-02-03 20:34:51] AMU0: GetResults (amt=0 err=-7 ern=16)
 [2016-02-03 20:34:51] Icarus Read: No data for 102 ms
 [2016-02-03 20:34:51] Rockminer nonce_bin: 00 00 00 00 00 00 00 00
 [2016-02-03 20:34:51] detect_one get_gold_nonce error, tries = 2
 [2016-02-03 20:34:51] AMU: cgid 0 EnableUART got err 0
 [2016-02-03 20:34:51] AMU: cgid 0 SetDataCtrl got err 0
 [2016-02-03 20:34:51] AMU: cgid 0 SetBaud got err 4
 [2016-02-03 20:34:51] tries: 1
 [2016-02-03 20:34:51] AMU0: GetResults (amt=0 err=-7 ern=16)
 [2016-02-03 20:34:51] Icarus Read: No data for 101 ms
 [2016-02-03 20:34:51] Rockminer nonce_bin: 00 00 00 00 00 00 00 00
 [2016-02-03 20:34:51] detect_one get_gold_nonce error, tries = 1
 [2016-02-03 20:34:51] AMU: cgid 0 EnableUART got err 0
 [2016-02-03 20:34:51] AMU: cgid 0 SetDataCtrl got err 0
 [2016-02-03 20:34:51] AMU: cgid 0 SetBaud got err 4
 [2016-02-03 20:34:51] tries: 0
 [2016-02-03 20:34:51] AMU0: GetResults (amt=0 err=-7 ern=16)
 [2016-02-03 20:34:51] Icarus Read: No data for 102 ms
 [2016-02-03 20:34:51] Rockminer nonce_bin: 00 00 00 00 00 00 00 00
 [2016-02-03 20:34:51] detect_one get_gold_nonce error, tries = 0
 [2016-02-03 20:34:51] USB uninit AMU0
 [2016-02-03 20:34:51] USB free AMU
 [2016-02-03 20:34:51] USB unlock Icarus 1-2
 [2016-02-03 20:34:51] ICA looking for ICA 067b:2303 but found 8087:0024 instead
 [2016-02-03 20:34:51 [2016-02-0] 3 2RES: Icarus (0:34:51]1:2) lock=0 
ICA looking for ICA 1fc9:0083 but found 8087:0024 instead
 [2016-02-03 20:34:51] USB res unlock Icarus 1-2
 [2016-02-03 20:34:51] ICA looking for AMU 10c4:ea60 but found 8087:0024 instead
 [2016-02-03 20:34:51] ICA looking for LIN 10c4:ea60 but found 8087:0024 instead
 [2016-02-03 20:34:51] ICA looking for ANU 10c4:ea60 but found 8087:0024 instead
 [2016-02-03 20:34:51] ICA looking for BLT 0403:6001 but found 8087:0024 instead
 [2016-02-03 20:34:51] ICA looking for LLT 0403:6001 but found 8087:0024 instead
 [2016-02-03 20:34:51] ICA looking for CMR 0403:6014 but found 8087:0024 instead
 [2016-02-03 20:34:51] ICA looking for CMR 0403:8350 but found 8087:0024 instead
 [2016-02-03 20:34:51] ICA looking for ICA 067b:2303 but found 8086:1c2d instead
 [2016-02-03 20:34:51] ICA looking for ICA 1fc9:0083 but found 8086:1c2d instead
 [2016-02-03 20:34:51] ICA looking for AMU 10c4:ea60 but found 8086:1c2d instead
 [2016-02-03 20:34:51] ICA looking for LIN 10c4:ea60 but found 8086:1c2d instead
 [2016-02-03 20:34:51] ICA looking for ANU 10c4:ea60 but found 8086:1c2d instead
 [2016-02-03 20:34:51] ICA looking for BLT 0403:6001 but found 8086:1c2d instead
 [2016-02-03 20:34:51] ICA looking for LLT 0403:6001 but found 8086:1c2d instead
 [2016-02-03 20:34:51] ICA looking for CMR 0403:6014 but found 8086:1c2d instead
 [2016-02-03 20:34:51] ICA looking for CMR 0403:8350 but found 8086:1c2d instead
 [2016-02-03 20:34:51] ICA looking for ICA 067b:2303 but found 8087:0024 instead
 [2016-02-03 20:34:51] ICA looking for ICA 1fc9:0083 but found 8087:0024 instead
 [2016-02-03 20:34:51] ICA looking for AMU 10c4:ea60 but found 8087:0024 instead
 [2016-02-03 20:34:51] ICA looking for LIN 10c4:ea60 but found 8087:0024 instead
 [2016-02-03 20:34:51] ICA looking for ANU 10c4:ea60 but found 8087:0024 instead
 [2016-02-03 20:34:51] ICA looking for BLT 0403:6001 but found 8087:0024 instead
 [2016-02-03 20:34:51] ICA looking for LLT 0403:6001 but found 8087:0024 instead
 [2016-02-03 20:34:51] ICA looking for CMR 0403:6014 but found 8087:0024 instead
 [2016-02-03 20:34:51] ICA looking for CMR 0403:8350 but found 8087:0024 instead
 [2016-02-03 20:34:51] ICA looking for ICA 067b:2303 but found 1a40:0101 instead
 [2016-02-03 20:34:51] ICA looking for ICA 1fc9:0083 but found 1a40:0101 instead
 [2016-02-03 20:34:51] ICA looking for AMU 10c4:ea60 but found 1a40:0101 instead
 [2016-02-03 20:34:51] ICA looking for LIN 10c4:ea60 but found 1a40:0101 instead
 [2016-02-03 20:34:51] ICA looking for ANU 10c4:ea60 but found 1a40:0101 instead
 [2016-02-03 20:34:51] ICA looking for BLT 0403:6001 but found 1a40:0101 instead
 [2016-02-03 20:34:51] ICA looking for LLT 0403:6001 but found 1a40:0101 instead
 [2016-02-03 20:34:51] ICA looking for CMR 0403:6014 but found 1a40:0101 instead
 [2016-02-03 20:34:51] ICA looking for CMR 0403:8350 but found 1a40:0101 instead
 [2016-02-03 20:34:51] ICA looking for ICA 067b:2303 but found 8086:1c26 instead
 [2016-02-03 20:34:51] ICA looking for ICA 1fc9:0083 but found 8086:1c26 instead
 [2016-02-03 20:34:51] ICA looking for AMU 10c4:ea60 but found 8086:1c26 instead
 [2016-02-03 20:34:51] ICA looking for LIN 10c4:ea60 but found 8086:1c26 instead
 [2016-02-03 20:34:51] ICA looking for ANU 10c4:ea60 but found 8086:1c26 instead
 [2016-02-03 20:34:51] ICA looking for BLT 0403:6001 but found 8086:1c26 instead
 [2016-02-03 20:34:51] ICA looking for LLT 0403:6001 but found 8086:1c26 instead
 [2016-02-03 20:34:51] ICA looking for CMR 0403:6014 but found 8086:1c26 instead
 [2016-02-03 20:34:51] ICA looking for CMR 0403:8350 but found 8086:1c26 instead
 [2016-02-03 20:34:51] USB scan devices: checking for ICA devices
 [2016-02-03 20:34:51] ICA looking for ICA 067b:2303 but found 10c4:ea60 instead
 [2016-02-03 20:34:51] ICA looking for ICA 1fc9:0083 but found 10c4:ea60 instead
 [2016-02-03 20:34:51] ICA looking for and found AMU 10c4:ea60
 [2016-02-03 20:34:51] USB lock Icarus 1-2
 [2016-02-03 20:34:51] RES: Icarus (1:2) lock=1
 [2016-02-03 20:34:51] USB res lock Icarus 1-2
 [2016-02-03 20:34:51] RES: Icarus (1:2) lock ok=1
 [2016-02-03 20:34:52] USB init - AMU device 1:2 usbver=0110 prod='CP2102 USB to UART Bridge Controller' manuf='Silicon Labs' serial='0001'
 [2016-02-03 20:34:52] AMU0: GetResults (amt=0 err=-7 ern=16)
 [2016-02-03 20:34:52] AMU: cgid 0 EnableUART got err 0
 [2016-02-03 20:34:52] AMU: cgid 0 SetDataCtrl got err 0
 [2016-02-03 20:34:52] AMU: cgid 0 SetBaud got err 4
 [2016-02-03 20:34:52] AMU0: GetResults (amt=0 err=-7 ern=16)
 [2016-02-03 20:34:52] Icarus Read: No data for 302 ms
 [2016-02-03 20:34:52] AMU0: GetResults (amt=0 err=-7 ern=16)
 [2016-02-03 20:34:52] AMU: cgid 0 EnableUART got err 0
 [2016-02-03 20:34:52] AMU: cgid 0 SetDataCtrl got err 0
 [2016-02-03 20:34:52] AMU: cgid 0 SetBaud got err 4
 [2016-02-03 20:34:52] AMU0: GetResults (amt=0 err=-7 ern=16)
 [2016-02-03 20:34:52] Icarus Read: No data for 301 ms
 [2016-02-03 20:34:52] AMU0: GetResults (amt=0 err=-7 ern=16)
 [2016-02-03 20:34:52] AMU: cgid 0 EnableUART got err 0
 [2016-02-03 20:34:52] AMU: cgid 0 SetDataCtrl got err 0
 [2016-02-03 20:34:52] AMU: cgid 0 SetBaud got err 4
 [2016-02-03 20:34:52] Send ANU voltage aab775de
 [2016-02-03 20:34:53] AMU 0: Send frequency 8208821c
 [2016-02-03 20:34:53] AMU0: GetResults (amt=0 err=-7 ern=16)
 [2016-02-03 20:34:53] AMU 0: Send freq getstatus 84000400
 [2016-02-03 20:34:53] AMU0: GetResults (amt=0 err=-7 ern=16)
 [2016-02-03 20:34:53] AU3 0: Detected Antminer U3
 [2016-02-03 20:34:53] AU30: GetResults (amt=0 err=-7 ern=16)
 [2016-02-03 20:34:53] Icarus Read: No data for 301 ms
 [2016-02-03 20:34:54] AU30: GetResults (amt=0 err=-7 ern=16)
 [2016-02-03 20:34:54] AU3: cgid 0 EnableUART got err 0
 [2016-02-03 20:34:54] AU3: cgid 0 SetDataCtrl got err 0
 [2016-02-03 20:34:54] AU3: cgid 0 SetBaud got err 4
 [2016-02-03 20:34:54] Send ANU voltage aab775de
 [2016-02-03 20:34:54] AU3 0: Send frequency 8208821c
 [2016-02-03 20:34:54] AU30: GetResults (amt=0 err=-7 ern=16)
 [2016-02-03 20:34:54] AU3 0: Send freq getstatus 84000400
 [2016-02-03 20:34:54] AU30: GetResults (amt=0 err=-7 ern=16)
 [2016-02-03 20:34:54] AU3 0: Detected Antminer U3
 [2016-02-03 20:34:55] AU30: GetResults (amt=0 err=-7 ern=16)
 [2016-02-03 20:34:55] Icarus Read: No data for 302 ms
 [2016-02-03 20:34:55] USB uninit AU30
 [2016-02-03 20:34:55] USB free AMU
 [2016-02-03 20:34:55] USB unlock Icarus 1-2
 [2016-02-03 20:34:55] ICA looking for ICA 067b:2303 but found 8087:0024 instead
 [2016-02-03 20:34:55] RES: Icarus (1:2) lock=0
 [2016-02-03 20:34:55] ICA looking for ICA 1fc9:0083 but found 8087:0024 instead
 [2016-02-03 20:34:55] USB res unlock Icarus 1-2
 [2016-02-03 20:34:55] ICA looking for AMU 10c4:ea60 but found 8087:0024 instead
 [2016-02-03 20:34:55] ICA looking for LIN 10c4:ea60 but found 8087:0024 instead
 [2016-02-03 20:34:55] ICA looking for ANU 10c4:ea60 but found 8087:0024 instead
 [2016-02-03 20:34:55] ICA looking for BLT 0403:6001 but found 8087:0024 instead
 [2016-02-03 20:34:55] ICA looking for LLT 0403:6001 but found 8087:0024 instead
 [2016-02-03 20:34:55] ICA looking for CMR 0403:6014 but found 8087:0024 instead
 [2016-02-03 20:34:55] ICA looking for CMR 0403:8350 but found 8087:0024 instead
 [2016-02-03 20:34:55] ICA looking for ICA 067b:2303 but found 8086:1c2d instead
 [2016-02-03 20:34:55] ICA looking for ICA 1fc9:0083 but found 8086:1c2d instead
 [2016-02-03 20:34:55] ICA looking for AMU 10c4:ea60 but found 8086:1c2d instead
 [2016-02-03 20:34:55] ICA looking for LIN 10c4:ea60 but found 8086:1c2d instead
 [2016-02-03 20:34:55] ICA looking for ANU 10c4:ea60 but found 8086:1c2d instead
 [2016-02-03 20:34:55] ICA looking for BLT 0403:6001 but found 8086:1c2d instead
 [2016-02-03 20:34:55] ICA looking for LLT 0403:6001 but found 8086:1c2d instead
 [2016-02-03 20:34:55] ICA looking for CMR 0403:6014 but found 8086:1c2d instead
 [2016-02-03 20:34:55] ICA looking for CMR 0403:8350 but found 8086:1c2d instead
 [2016-02-03 20:34:55] ICA looking for ICA 067b:2303 but found 8087:0024 instead
 [2016-02-03 20:34:55] ICA looking for ICA 1fc9:0083 but found 8087:0024 instead
 [2016-02-03 20:34:55] ICA looking for AMU 10c4:ea60 but found 8087:0024 instead
 [2016-02-03 20:34:55] ICA looking for LIN 10c4:ea60 but found 8087:0024 instead
 [2016-02-03 20:34:55] ICA looking for ANU 10c4:ea60 but found 8087:0024 instead
 [2016-02-03 20:34:55] ICA looking for BLT 0403:6001 but found 8087:0024 instead
 [2016-02-03 20:34:55] ICA looking for LLT 0403:6001 but found 8087:0024 instead
 [2016-02-03 20:34:55] ICA looking for CMR 0403:6014 but found 8087:0024 instead
 [2016-02-03 20:34:55] ICA looking for CMR 0403:8350 but found 8087:0024 instead
 [2016-02-03 20:34:55] ICA looking for ICA 067b:2303 but found 1a40:0101 instead
 [2016-02-03 20:34:55] ICA looking for ICA 1fc9:0083 but found 1a40:0101 instead
 [2016-02-03 20:34:55] ICA looking for AMU 10c4:ea60 but found 1a40:0101 instead
 [2016-02-03 20:34:55] ICA looking for LIN 10c4:ea60 but found 1a40:0101 instead
 [2016-02-03 20:34:55] ICA looking for ANU 10c4:ea60 but found 1a40:0101 instead
 [2016-02-03 20:34:55] ICA looking for BLT 0403:6001 but found 1a40:0101 instead
 [2016-02-03 20:34:55] ICA looking for LLT 0403:6001 but found 1a40:0101 instead
 [2016-02-03 20:34:55] ICA looking for CMR 0403:6014 but found 1a40:0101 instead
 [2016-02-03 20:34:55] ICA looking for CMR 0403:8350 but found 1a40:0101 instead
 [2016-02-03 20:34:55] ICA looking for ICA 067b:2303 but found 8086:1c26 instead
 [2016-02-03 20:34:55] ICA looking for ICA 1fc9:0083 but found 8086:1c26 instead
 [2016-02-03 20:34:55] ICA looking for AMU 10c4:ea60 but found 8086:1c26 instead
 [2016-02-03 20:34:55] ICA looking for LIN 10c4:ea60 but found 8086:1c26 instead
 [2016-02-03 20:34:55] ICA looking for ANU 10c4:ea60 but found 8086:1c26 instead
 [2016-02-03 20:34:55] ICA looking for BLT 0403:6001 but found 8086:1c26 instead
 [2016-02-03 20:34:55] ICA looking for LLT 0403:6001 but found 8086:1c26 instead
 [2016-02-03 20:34:55] ICA looking for CMR 0403:6014 but found 8086:1c26 instead
 [2016-02-03 20:34:55] ICA looking for CMR 0403:8350 but found 8086:1c26 instead
 [2016-02-03 20:34:55] USB scan devices: checking for KLN devices
 [2016-02-03 20:34:55] KLN looking for KLN 04d8:f60a but found 10c4:ea60 instead
 [2016-02-03 20:34:55] KLN looking for KLI 04d8:f60a but found 10c4:ea60 instead
 [2016-02-03 20:34:55] KLN looking for KLN 04d8:f60a but found 8087:0024 instead
 [2016-02-03 20:34:55] KLN looking for KLI 04d8:f60a but found 8087:0024 instead
 [2016-02-03 20:34:55] KLN looking for KLN 04d8:f60a but found 8086:1c2d instead
 [2016-02-03 20:34:55] KLN looking for KLI 04d8:f60a but found 8086:1c2d instead
 [2016-02-03 20:34:55] KLN looking for KLN 04d8:f60a but found 8087:0024 instead
 [2016-02-03 20:34:55] KLN looking for KLI 04d8:f60a but found 8087:0024 instead
 [2016-02-03 20:34:55] KLN looking for KLN 04d8:f60a but found 1a40:0101 instead
 [2016-02-03 20:34:55] KLN looking for KLI 04d8:f60a but found 1a40:0101 instead
 [2016-02-03 20:34:55] KLN looking for KLN 04d8:f60a but found 8086:1c26 instead
 [2016-02-03 20:34:55] KLN looking for KLI 04d8:f60a but found 8086:1c26 instead
 [2016-02-03 20:34:55] USB scan devices: checking for DRB devices
 [2016-02-03 20:34:55] DRB looking for DRB 03eb:2404 but found 10c4:ea60 instead
 [2016-02-03 20:34:55] DRB looking for DRB 03eb:2404 but found 8087:0024 instead
 [2016-02-03 20:34:55] DRB looking for DRB 03eb:2404 but found 8086:1c2d instead
 [2016-02-03 20:34:55] DRB looking for DRB 03eb:2404 but found 8087:0024 instead
 [2016-02-03 20:34:55] DRB looking for DRB 03eb:2404 but found 1a40:0101 instead
 [2016-02-03 20:34:55] DRB looking for DRB 03eb:2404 but found 8086:1c26 instead
 [2016-02-03 20:34:55] No devices detected!
 [2016-02-03 20:34:55] Waiting for USB hotplug devices or press q to quit
 [2016-02-03 20:34:55] Probing for an alive pool
 [2016-02-03 20:34 [2016-02-03 :520:34:55] Testing pool s5tratum+tcp://p2p.ant] pool.com:25
Testing pool stratum+tcp://stratum.antpool.com:3336
 [2016-02-03 20:34:56] Select timeout/failed connect
 [2016-02-03 20:34:56] Failed to connect to stratum on p2p.antpool.com:25
 [2016-02-03 20:34:56] Initiate stratum failed
 [2016-02-03 20:34:57] Select timeout/failed connect
 [2016-02-03 20:34:58] Select timeout/failed connect
 [2016-02-03 20:34:58] Failed to connect to stratum on stratum.antpool.com:3336
 [2016-02-03 20:34:58] Initiate stratum failed
 [2016-02-03 20:35:01] Testing pool stratum+tcp://p2p.antpool.com:25
 [2016-02-03 20:35:02] Select timeout/failed connect
 [2016-02-03 20:35:02] Failed to connect to stratum on p2p.antpool.com:25
 [2016-02-03 20:35:02] Initiate stratum failed
 [2016-02-03 20:35:03] Testing pool stratum+tcp://stratum.antpool.com:3336
 [2016-02-03 20:35:04] Select timeout/failed connect
 [2016-02-03 20:35:05] Select timeout/failed connect
 [2016-02-03 20:35:05] Failed to connect to stratum on stratum.antpool.com:3336
 [2016-02-03 20:35:05] Initiate stratum failed
 [2016-02-03 20:35:07] Testing pool stratum+tcp://p2p.antpool.com:25
 [2016-02-03 20:35:08] Select timeout/failed connect
 [2016-02-03 20:35:08] Failed to connect to stratum on p2p.antpool.com:25
 [2016-02-03 20:35:08] Initiate stratum failed
 [2016-02-03 20:35:10] Testing pool stratum+tcp://stratum.antpool.com:3336
 [2016-02-03 20:35:11] Select timeout/failed connect
 [2016-02-03 20:35:12] Select timeout/failed connect
 [2016-02-03 20:35:12] Failed to connect to stratum on stratum.antpool.com:3336
 [2016-02-03 20:35:12] Initiate stratum failed
 [2016-02-03 20:35:13] Testing pool stratum+tcp://p2p.antpool.com:25
 [2016-02-03 20:35:14] Select timeout/failed connect
 [2016-02-03 20:35:14] Failed to connect to stratum on p2p.antpool.com:25
 [2016-02-03 20:35:14] Initiate stratum failed
 [2016-02-03 20:35:17] Testing pool stratum+tcp://stratum.antpool.com:3336
 [2016-02-03 20:35:18] Select timeout/failed connect
 [2016-02-03 20:35:19] Testing pool stratum+tcp://p2p.antpool.com:25
 [2016-02-03 20:35:19] Select timeout/failed connect
 [2016-02-03 20:35:19] Failed to connect to stratum on stratum.antpool.com:3336
 [2016-02-03 20:35:19] Initiate stratum failed
 [2016-02-03 20:35:20] Select timeout/failed connect
 [2016-02-03 20:35:20] Failed to connect to stratum on p2p.antpool.com:25
 [2016-02-03 20:35:20] Initiate stratum failed
 [2016-02-03 20:35:24] Testing pool stratum+tcp://stratum.antpool.com:3336
 [2016-02-03 20:35:25] Testing pool stratum+tcp://p2p.antpool.com:25
 [2016-02-03 20:35:26] Select timeout/failed connect
 [2016-02-03 20:35:26] Select timeout/failed connect
 [2016-02-03 20:35:26] Failed to connect to stratum on p2p.antpool.com:25
 [2016-02-03 20:35:26] Initiate stratum failed
 [2016-02-03 20:35:27] Select timeout/failed connect
 [2016-02-03 20:35:27] Failed to connect to stratum on stratum.antpool.com:3336
 [2016-02-03 20:35:27] Initiate stratum failed
 [2016-02-03 20:35:31] Testing pool stratum+tcp://p2p.antpool.com:25
 [2016-02-03 20:35:32] Testing pool stratum+tcp://stratum.antpool.com:3336
 [2016-02-03 20:35:32] Select timeout/failed connect
 [2016-02-03 20:35:32] Failed to connect to stratum on p2p.antpool.com:25
 [2016-02-03 20:35:32] Initiate stratum failed
 [2016-02-03 20:35:33] Select timeout/failed connect
 [2016-02-03 20:35:34] Select timeout/failed connect
 [2016-02-03 20:35:34] Failed to connect to stratum on stratum.antpool.com:3336
 [2016-02-03 20:35:34] Initiate stratum failed
 [2016-02-03 20:35:37] Testing pool stratum+tcp://p2p.antpool.com:25
 [2016-02-03 20:35:38] Select timeout/failed connect
 [2016-02-03 20:35:38] Failed to connect to stratum on p2p.antpool.com:25
 [2016-02-03 20:35:38] Initiate stratum failed
 [2016-02-03 20:35:39] Testing pool stratum+tcp://stratum.antpool.com:3336
 [2016-02-03 20:35:40] Select timeout/failed connect
 [2016-02-03 20:35:41] Select timeout/failed connect
 [2016-02-03 20:35:41] Failed to connect to stratum on stratum.antpool.com:3336
 [2016-02-03 20:35:41] Initiate stratum failed
 [2016-02-03 20:35:43] Testing pool stratum+tcp://p2p.antpool.com:25
 [2016-02-03 20:35:44] Select timeout/failed connect
 [2016-02-03 20:35:44] Failed to connect to stratum on p2p.antpool.com:25
 [2016-02-03 20:35:44] Initiate stratum failed
 [2016-02-03 20:35:46] Testing pool stratum+tcp://stratum.antpool.com:3336
 [2016-02-03 20:35:47] Select timeout/failed connect
 [2016-02-03 20:35:48] Select timeout/failed connect
 [2016-02-03 20:35:48] Failed to connect to stratum on stratum.antpool.com:3336
 [2016-02-03 20:35:48] Initiate stratum failed
 [2016-02-03 20:35:49] Testing pool stratum+tcp://p2p.antpool.com:25
 [2016-02-03 20:35:50] Select timeout/failed connect
 [2016-02-03 20:35:50] Failed to connect to stratum on p2p.antpool.com:25
 [2016-02-03 20:35:50] Initiate stratum failed
 [2016-02-03 20:35:53] Testing pool stratum+tcp://stratum.antpool.com:3336
 [2016-02-03 20:35:54] Select timeout/failed connect
 [2016-02-03 20:35:55] No servers were found that could be used to get work from.
 [2016-02-03 20:35:55] Please check the details from the list below of the servers you have input
 [2016-02-03 20:35:55] Most likely you have input the wrong URL, forgotten to add a port, or have not set up workers
 [2016-02-03 20:35:55] Pool: 0  URL: stratum+tcp://stratum.antpool.com:3336  User: antminer_1  Password: 
 [2016-02-03 20:35:55] Testing pool stratum+tcp://p2p.antpool.com:25
 [2016-02-03 20:35:55] Pool: 1  URL: stratum+tcp://p2p.antpool.com:25  User: antminer_2  Password: 
 [2016-02-03 20:35:55] Press any key to exit, or cgminer will wait indefinitely for an alive pool.
 [2016-02-03 20:35:55] No servers could be used! Exiting.

[Mikestang]

Lots of errors at the end of your log about connecting to a pool, but that doesn't have anything to do with your U3.  What is your specific issue right now?  Have you tried other pools?

[fabiano.dl]

Lots of errors at the end of your log about connecting to a pool, but that doesn't have anything to do with your U3.  What is your specific issue right now?  Have you tried other pools?

The problem still be load antminer U3.. they found, but some error occours that they dindt start do work..

i will sent anew log with a online pool, and another code with error section.
Tkz again!!

Code:

 [2016-02-03 21:47:29] Started cgminer 4.9.2
 [2016-02-03 21:47:29] USB scan devices: checking for AVA devices
 [2016-02-03 21:47:29] RES: thread starting
 [2016-02-03 21:47:29] AVA looking for BTB 0403:6001 but found 10c4:ea60 instead
 [2016-02-03 21:47:29] AVA looking for BBF 0403:6001 but found 10c4:ea60 instead
 [2016-02-03 21:47:29] AVA looking for AVA 0403:6001 but found 10c4:ea60 instead
 [2016-02-03 21:47:29] AVA looking for BTB 0403:6001 but found 8087:0024 instead
 [2016-02-03 21:47:29] AVA looking for BBF 0403:6001 but found 8087:0024 instead
 [2016-02-03 21:47:29] AVA looking for AVA 0403:6001 but found 8087:0024 instead
 [2016-02-03 21:47:29] AVA looking for BTB 0403:6001 but found 8086:1c2d instead
 [2016-02-03 21:47:29] AVA looking for BBF 0403:6001 but found 8086:1c2d instead
 [2016-02-03 21:47:29] AVA looking for AVA 0403:6001 but found 8086:1c2d instead
 [2016-02-03 21:47:29] AVA looking for BTB 0403:6001 but found 8087:0024 instead
 [2016-02-03 21:47:29] AVA looking for BBF 0403:6001 but found 8087:0024 instead
 [2016-02-03 21:47:29] AVA looking for AVA 0403:6001 but found 8087:0024 instead
 [2016-02-03 21:47:29] AVA looking for BTB 0403:6001 but found 1a40:0101 instead
 [2016-02-03 21:47:29] AVA looking for BBF 0403:6001 but found 1a40:0101 instead
 [2016-02-03 21:47:29] AVA looking for AVA 0403:6001 but found 1a40:0101 instead
 [2016-02-03 21:47:29] AVA looking for BTB 0403:6001 but found 8086:1c26 instead
 [2016-02-03 21:47:29] AVA looking for BBF 0403:6001 but found 8086:1c26 instead
 [2016-02-03 21:47:29] AVA looking for AVA 0403:6001 but found 8086:1c26 instead
 [2016-02-03 21:47:29] USB scan devices: checking for AV2 devices
 [2016-02-03 21:47:29] AV2 looking for AV2 067b:2303 but found 10c4:ea60 instead
 [2016-02-03 21:47:29] AV2 looking for AV2 067b:2303 but found 8087:0024 instead
 [2016-02-03 21:47:29] AV2 looking for AV2 067b:2303 but found 8086:1c2d instead
 [2016-02-03 21:47:29] AV2 looking for AV2 067b:2303 but found 8087:0024 instead
 [2016-02-03 21:47:29] AV2 looking for AV2 067b:2303 but found 1a40:0101 instead
 [2016-02-03 21:47:29] AV2 looking for AV2 067b:2303 but found 8086:1c26 instead
 [2016-02-03 21:47:29] USB scan devices: checking for AV4 devices
 [2016-02-03 21:47:29] AV4 looking for AV4 29f1:33f2 but found 10c4:ea60 instead
 [2016-02-03 21:47:29] AV4 looking for AV4 29f1:33f2 but found 8087:0024 instead
 [2016-02-03 21:47:29] AV4 looking for AV4 29f1:33f2 but found 8086:1c2d instead
 [2016-02-03 21:47:29] AV4 looking for AV4 29f1:33f2 but found 8087:0024 instead
 [2016-02-03 21:47:29] AV4 looking for AV4 29f1:33f2 but found 1a40:0101 instead
 [2016-02-03 21:47:29] AV4 looking for AV4 29f1:33f2 but found 8086:1c26 instead
 [2016-02-03 21:47:29] USB scan devices: checking for BAS devices
 [2016-02-03 21:47:29] BAS looking for BAS 0403:6014 but found 10c4:ea60 instead
 [2016-02-03 21:47:29] BAS looking for BAS 0403:6014 but found 10c4:ea60 instead
 [2016-02-03 21:47:29] BAS looking for BMA 0403:6014 but found 10c4:ea60 instead
 [2016-02-03 21:47:29] BAS looking for BMA 0403:6014 but found 10c4:ea60 instead
 [2016-02-03 21:47:29] BAS looking for BMA 0403:6014 but found 10c4:ea60 instead
 [2016-02-03 21:47:29] BAS looking for BAS 0403:6014 but found 8087:0024 instead
 [2016-02-03 21:47:29] BAS looking for BAS 0403:6014 but found 8087:0024 instead
 [2016-02-03 21:47:29] BAS looking for BMA 0403:6014 but found 8087:0024 instead
 [2016-02-03 21:47:29] BAS looking for BMA 0403:6014 but found 8087:0024 instead
 [2016-02-03 21:47:29] BAS looking for BMA 0403:6014 but found 8087:0024 instead
 [2016-02-03 21:47:29] BAS looking for BAS 0403:6014 but found 8086:1c2d instead
 [2016-02-03 21:47:29] BAS looking for BAS 0403:6014 but found 8086:1c2d instead
 [2016-02-03 21:47:29] BAS looking for BMA 0403:6014 but found 8086:1c2d instead
 [2016-02-03 21:47:29] BAS looking for BMA 0403:6014 but found 8086:1c2d instead
 [2016-02-03 21:47:29] BAS looking for BMA 0403:6014 but found 8086:1c2d instead
 [2016-02-03 21:47:29] BAS looking for BAS 0403:6014 but found 8087:0024 instead
 [2016-02-03 21:47:29] BAS looking for BAS 0403:6014 but found 8087:0024 instead
 [2016-02-03 21:47:29] BAS looking for BMA 0403:6014 but found 8087:0024 instead
 [2016-02-03 21:47:29] BAS looking for BMA 0403:6014 but found 8087:0024 instead
 [2016-02-03 21:47:29] BAS looking for BMA 0403:6014 but found 8087:0024 instead
 [2016-02-03 21:47:29] BAS looking for BAS 0403:6014 but found 1a40:0101 instead
 [2016-02-03 21:47:29] BAS looking for BAS 0403:6014 but found 1a40:0101 instead
 [2016-02-03 21:47:29] BAS looking for BMA 0403:6014 but found 1a40:0101 instead
 [2016-02-03 21:47:29] BAS looking for BMA 0403:6014 but found 1a40:0101 instead
 [2016-02-03 21:47:29] BAS looking for BMA 0403:6014 but found 1a40:0101 instead
 [2016-02-03 21:47:29] BAS looking for BAS 0403:6014 but found 8086:1c26 instead
 [2016-02-03 21:47:29] BAS looking for BAS 0403:6014 but found 8086:1c26 instead
 [2016-02-03 21:47:29] BAS looking for BMA 0403:6014 but found 8086:1c26 instead
 [2016-02-03 21:47:29] BAS looking for BMA 0403:6014 but found 8086:1c26 instead
 [2016-02-03 21:47:29] BAS looking for BMA 0403:6014 but found 8086:1c26 instead
 [2016-02-03 21:47:29] USB scan devices: checking for BF1 devices
 [2016-02-03 21:47:29] BF1 looking for BF1 03eb:204b but found 10c4:ea60 instead
 [2016-02-03 21:47:29] BF1 looking for BXF 198c:b1f1 but found 10c4:ea60 instead
 [2016-02-03 21:47:29] BF1 looking for OSM 198c:b1f1 but found 10c4:ea60 instead
 [2016-02-03 21:47:29] BF1 looking for NFU 04d8:00de but found 10c4:ea60 instead
 [2016-02-03 21:47:29] BF1 looking for BXM 0403:6014 but found 10c4:ea60 instead
 [2016-02-03 21:47:29] BF1 looking for BF1 03eb:204b but found 8087:0024 instead
 [2016-02-03 21:47:29] BF1 looking for BXF 198c:b1f1 but found 8087:0024 instead
 [2016-02-03 21:47:29] BF1 looking for OSM 198c:b1f1 but found 8087:0024 instead
 [2016-02-03 21:47:29] BF1 looking for NFU 04d8:00de but found 8087:0024 instead
 [2016-02-03 21:47:29] BF1 looking for BXM 0403:6014 but found 8087:0024 instead
 [2016-02-03 21:47:29] BF1 looking for BF1 03eb:204b but found 8086:1c2d instead
 [2016-02-03 21:47:29] BF1 looking for BXF 198c:b1f1 but found 8086:1c2d instead
 [2016-02-03 21:47:29] BF1 looking for OSM 198c:b1f1 but found 8086:1c2d instead
 [2016-02-03 21:47:29] BF1 looking for NFU 04d8:00de but found 8086:1c2d instead
 [2016-02-03 21:47:29] BF1 looking for BXM 0403:6014 but found 8086:1c2d instead
 [2016-02-03 21:47:29] BF1 looking for BF1 03eb:204b but found 8087:0024 instead
 [2016-02-03 21:47:29] BF1 looking for BXF 198c:b1f1 but found 8087:0024 instead
 [2016-02-03 21:47:29] BF1 looking for OSM 198c:b1f1 but found 8087:0024 instead
 [2016-02-03 21:47:29] BF1 looking for NFU 04d8:00de but found 8087:0024 instead
 [2016-02-03 21:47:29] BF1 looking for BXM 0403:6014 but found 8087:0024 instead
 [2016-02-03 21:47:29] BF1 looking for BF1 03eb:204b but found 1a40:0101 instead
 [2016-02-03 21:47:29] BF1 looking for BXF 198c:b1f1 but found 1a40:0101 instead
 [2016-02-03 21:47:29] BF1 looking for OSM 198c:b1f1 but found 1a40:0101 instead
 [2016-02-03 21:47:29] BF1 looking for NFU 04d8:00de but found 1a40:0101 instead
 [2016-02-03 21:47:29] BF1 looking for BXM 0403:6014 but found 1a40:0101 instead
 [2016-02-03 21:47:29] BF1 looking for BF1 03eb:204b but found 8086:1c26 instead
 [2016-02-03 21:47:29] BF1 looking for BXF 198c:b1f1 but found 8086:1c26 instead
 [2016-02-03 21:47:29] BF1 looking for OSM 198c:b1f1 but found 8086:1c26 instead
 [2016-02-03 21:47:29] BF1 looking for NFU 04d8:00de but found 8086:1c26 instead
 [2016-02-03 21:47:29] BF1 looking for BXM 0403:6014 but found 8086:1c26 instead
 [2016-02-03 21:47:29] USB scan devices: checking for CTA devices
 [2016-02-03 21:47:30] CTA looking for CTA 1cbe:0003 but found 10c4:ea60 instead
 [2016-02-03 21:47:30] CTA looking for CTA 1cbe:0003 but found 8087:0024 instead
 [2016-02-03 21:47:30] CTA looking for CTA 1cbe:0003 but found 8086:1c2d instead
 [2016-02-03 21:47:30] CTA looking for CTA 1cbe:0003 but found 8087:0024 instead
 [2016-02-03 21:47:30] CTA looking for CTA 1cbe:0003 but found 1a40:0101 instead
 [2016-02-03 21:47:30] CTA looking for CTA 1cbe:0003 but found 8086:1c26 instead
 [2016-02-03 21:47:30] USB scan devices: checking for HFA devices
 [2016-02-03 21:47:30] HFA looking for HFA 297c:0001 but found 10c4:ea60 instead
 [2016-02-03 21:47:30] HFA looking for HFA 297c:0001 but found 8087:0024 instead
 [2016-02-03 21:47:30] HFA looking for HFA 297c:0001 but found 8086:1c2d instead
 [2016-02-03 21:47:30] HFA looking for HFA 297c:0001 but found 8087:0024 instead
 [2016-02-03 21:47:30] HFA looking for HFA 297c:0001 but found 1a40:0101 instead
 [2016-02-03 21:47:30] HFA looking for HFA 297c:0001 but found 8086:1c26 instead
 [2016-02-03 21:47:30] USB scan devices: checking for HRO devices
 [2016-02-03 21:47:30] HRO looking for HRO 0403:6001 but found 10c4:ea60 instead
 [2016-02-03 21:47:30] HRO looking for HRO 0403:6001 but found 8087:0024 instead
 [2016-02-03 21:47:30] HRO looking for HRO 0403:6001 but found 8086:1c2d instead
 [2016-02-03 21:47:30] HRO looking for HRO 0403:6001 but found 8087:0024 instead
 [2016-02-03 21:47:30] HRO looking for HRO 0403:6001 but found 1a40:0101 instead
 [2016-02-03 21:47:30] HRO looking for HRO 0403:6001 but found 8086:1c26 instead
 [2016-02-03 21:47:30] USB scan devices: checking for ICA devices
 [2016-02-03 21:47:30] ICA looking for ICA 067b:2303 but found 10c4:ea60 instead
 [2016-02-03 21:47:30] ICA looking for ICA 1fc9:0083 but found 10c4:ea60 instead
 [2016-02-03 21:47:30] ICA looking for and found AMU 10c4:ea60
 [2016-02-03 21:47:30] USB lock Icarus 1-2
 [2016-02-03 21:47:30] RES: Icarus (1:2) lock=1
 [2016-02-03 21:47:30] USB res lock Icarus 1-2
 [2016-02-03 21:47:30] RES: Icarus (1:2) lock ok=1
 [2016-02-03 21:47:30] USB init - AMU device 1:2 usbver=0110 prod='CP2102 USB to UART Bridge Controller' manuf='Silicon Labs' serial='0001'
 [2016-02-03 21:47:30] AMU 0: send_gold_nonce 4a548fe471fa3a9a1371144556c3f64d2500b4826008fe4bbf7698c94eba794600000000000000000000000000000000aa1ff055ce22a72f4f6726141a0b3287
 [2016-02-03 21:47:30] AMU: cgid 0 EnableUART got err 0
 [2016-02-03 21:47:30] AMU: cgid 0 SetDataCtrl got err 0
 [2016-02-03 21:47:30] AMU: cgid 0 SetBaud got err 4
 [2016-02-03 21:47:30] tries: 3
 [2016-02-03 21:47:30] AMU0: GetResults (amt=0 err=-7 ern=16)
 [2016-02-03 21:47:30] Icarus Read: No data for 101 ms
 [2016-02-03 21:47:30] Rockminer nonce_bin: 00 00 00 00 00 00 00 00
 [2016-02-03 21:47:30] detect_one get_gold_nonce error, tries = 3
 [2016-02-03 21:47:30] AMU: cgid 0 EnableUART got err 0
 [2016-02-03 21:47:30] AMU: cgid 0 SetDataCtrl got err 0
 [2016-02-03 21:47:30] AMU: cgid 0 SetBaud got err 4
 [2016-02-03 21:47:30] tries: 2
 [2016-02-03 21:47:30] AMU0: GetResults (amt=0 err=-7 ern=16)
 [2016-02-03 21:47:30] Icarus Read: No data for 101 ms
 [2016-02-03 21:47:30] Rockminer nonce_bin: 00 00 00 00 00 00 00 00
 [2016-02-03 21:47:30] detect_one get_gold_nonce error, tries = 2
 [2016-02-03 21:47:30] AMU: cgid 0 EnableUART got err 0
 [2016-02-03 21:47:30] AMU: cgid 0 SetDataCtrl got err 0
 [2016-02-03 21:47:30] AMU: cgid 0 SetBaud got err 4
 [2016-02-03 21:47:30] tries: 1
 [2016-02-03 21:47:31] AMU0: GetResults (amt=0 err=-7 ern=16)
 [2016-02-03 21:47:31] Icarus Read: No data for 101 ms
 [2016-02-03 21:47:31] Rockminer nonce_bin: 00 00 00 00 00 00 00 00
 [2016-02-03 21:47:31] detect_one get_gold_nonce error, tries = 1
 [2016-02-03 21:47:31] AMU: cgid 0 EnableUART got err 0
 [2016-02-03 21:47:31] AMU: cgid 0 SetDataCtrl got err 0
 [2016-02-03 21:47:31] AMU: cgid 0 SetBaud got err 4
 [2016-02-03 21:47:31] tries: 0
 [2016-02-03 21:47:31] AMU0: GetResults (amt=0 err=-7 ern=16)
 [2016-02-03 21:47:31] Icarus Read: No data for 101 ms
 [2016-02-03 21:47:31] Rockminer nonce_bin: 00 00 00 00 00 00 00 00
 [2016-02-03 21:47:31] detect_one get_gold_nonce error, tries = 0
 [2016-02-03 21:47:31] USB uninit AMU0
 [2016-02-03 21:47:31] USB free AMU
 [2016-02-03 21:47:31] USB unlock Icarus 1-2
 [2016-02-03 21:47:31] I [2CA 0lo16ok-i02n-03g 2 1for :4I7:31] CRA E0S: Ic67ab:2r3us0 (13:2 ) lock=0b
ut found 8087:0024 instead
 [2016-02-03 21:47:31] USB res unlock Icarus 1-2
 [2016-02-03 21:47:31] ICA looking for ICA 1fc9:0083 but found 8087:0024 instead
 [2016-02-03 21:47:31] ICA looking for AMU 10c4:ea60 but found 8087:0024 instead
 [2016-02-03 21:47:31] ICA looking for LIN 10c4:ea60 but found 8087:0024 instead
 [2016-02-03 21:47:31] ICA looking for ANU 10c4:ea60 but found 8087:0024 instead
 [2016-02-03 21:47:31] ICA looking for BLT 0403:6001 but found 8087:0024 instead
 [2016-02-03 21:47:31] ICA looking for LLT 0403:6001 but found 8087:0024 instead
 [2016-02-03 21:47:31] ICA looking for CMR 0403:6014 but found 8087:0024 instead
 [2016-02-03 21:47:31] ICA looking for CMR 0403:8350 but found 8087:0024 instead
 [2016-02-03 21:47:31] ICA looking for ICA 067b:2303 but found 8086:1c2d instead
 [2016-02-03 21:47:31] ICA looking for ICA 1fc9:0083 but found 8086:1c2d instead
 [2016-02-03 21:47:31] ICA looking for AMU 10c4:ea60 but found 8086:1c2d instead
 [2016-02-03 21:47:31] ICA looking for LIN 10c4:ea60 but found 8086:1c2d instead
 [2016-02-03 21:47:31] ICA looking for ANU 10c4:ea60 but found 8086:1c2d instead
 [2016-02-03 21:47:31] ICA looking for BLT 0403:6001 but found 8086:1c2d instead
 [2016-02-03 21:47:31] ICA looking for LLT 0403:6001 but found 8086:1c2d instead
 [2016-02-03 21:47:31] ICA looking for CMR 0403:6014 but found 8086:1c2d instead
 [2016-02-03 21:47:31] ICA looking for CMR 0403:8350 but found 8086:1c2d instead
 [2016-02-03 21:47:31] ICA looking for ICA 067b:2303 but found 8087:0024 instead
 [2016-02-03 21:47:31] ICA looking for ICA 1fc9:0083 but found 8087:0024 instead
 [2016-02-03 21:47:31] ICA looking for AMU 10c4:ea60 but found 8087:0024 instead
 [2016-02-03 21:47:31] ICA looking for LIN 10c4:ea60 but found 8087:0024 instead
 [2016-02-03 21:47:31] ICA looking for ANU 10c4:ea60 but found 8087:0024 instead
 [2016-02-03 21:47:31] ICA looking for BLT 0403:6001 but found 8087:0024 instead
 [2016-02-03 21:47:31] ICA looking for LLT 0403:6001 but found 8087:0024 instead
 [2016-02-03 21:47:31] ICA looking for CMR 0403:6014 but found 8087:0024 instead
 [2016-02-03 21:47:31] ICA looking for CMR 0403:8350 but found 8087:0024 instead
 [2016-02-03 21:47:31] ICA looking for ICA 067b:2303 but found 1a40:0101 instead
 [2016-02-03 21:47:31] ICA looking for ICA 1fc9:0083 but found 1a40:0101 instead
 [2016-02-03 21:47:31] ICA looking for AMU 10c4:ea60 but found 1a40:0101 instead
 [2016-02-03 21:47:31] ICA looking for LIN 10c4:ea60 but found 1a40:0101 instead
 [2016-02-03 21:47:31] ICA looking for ANU 10c4:ea60 but found 1a40:0101 instead
 [2016-02-03 21:47:31] ICA looking for BLT 0403:6001 but found 1a40:0101 instead
 [2016-02-03 21:47:31] ICA looking for LLT 0403:6001 but found 1a40:0101 instead
 [2016-02-03 21:47:31] ICA looking for CMR 0403:6014 but found 1a40:0101 instead
 [2016-02-03 21:47:31] ICA looking for CMR 0403:8350 but found 1a40:0101 instead
 [2016-02-03 21:47:31] ICA looking for ICA 067b:2303 but found 8086:1c26 instead
 [2016-02-03 21:47:31] ICA looking for ICA 1fc9:0083 but found 8086:1c26 instead
 [2016-02-03 21:47:31] ICA looking for AMU 10c4:ea60 but found 8086:1c26 instead
 [2016-02-03 21:47:31] ICA looking for LIN 10c4:ea60 but found 8086:1c26 instead
 [2016-02-03 21:47:31] ICA looking for ANU 10c4:ea60 but found 8086:1c26 instead
 [2016-02-03 21:47:31] ICA looking for BLT 0403:6001 but found 8086:1c26 instead
 [2016-02-03 21:47:31] ICA looking for LLT 0403:6001 but found 8086:1c26 instead
 [2016-02-03 21:47:31] ICA looking for CMR 0403:6014 but found 8086:1c26 instead
 [2016-02-03 21:47:31] ICA looking for CMR 0403:8350 but found 8086:1c26 instead
 [2016-02-03 21:47:31] USB scan devices: checking for ICA devices
 [2016-02-03 21:47:31] ICA looking for ICA 067b:2303 but found 10c4:ea60 instead
 [2016-02-03 21:47:31] ICA looking for ICA 1fc9:0083 but found 10c4:ea60 instead
 [2016-02-03 21:47:31] ICA looking for and found AMU 10c4:ea60
 [2016-02-03 21:47:31] USB lock Icarus 1-2
 [2016-02-03 21:47:31] RES: Icarus (1:2) lock=1
 [2016-02-03 21:47:31] USB res lock Icarus 1-2
 [2016-02-03 21:47:31] RES: Icarus (1:2) lock ok=1
 [2016-02-03 21:47:31] USB init - AMU device 1:2 usbver=0110 prod='CP2102 USB to UART Bridge Controller' manuf='Silicon Labs' serial='0001'
 [2016-02-03 21:47:31] AMU0: GetResults (amt=0 err=-7 ern=16)
 [2016-02-03 21:47:31] AMU: cgid 0 EnableUART got err 0
 [2016-02-03 21:47:31] AMU: cgid 0 SetDataCtrl got err 0
 [2016-02-03 21:47:31] AMU: cgid 0 SetBaud got err 4
 [2016-02-03 21:47:31] AMU0: GetResults (amt=0 err=-7 ern=16)
 [2016-02-03 21:47:31] Icarus Read: No data for 301 ms
 [2016-02-03 21:47:31] AMU0: GetResults (amt=0 err=-7 ern=16)
 [2016-02-03 21:47:31] AMU: cgid 0 EnableUART got err 0
 [2016-02-03 21:47:31] AMU: cgid 0 SetDataCtrl got err 0
 [2016-02-03 21:47:31] AMU: cgid 0 SetBaud got err 4
 [2016-02-03 21:47:32] AMU0: GetResults (amt=0 err=-7 ern=16)
 [2016-02-03 21:47:32] Icarus Read: No data for 302 ms
 [2016-02-03 21:47:32] AMU0: GetResults (amt=0 err=-7 ern=16)
 [2016-02-03 21:47:32] AMU: cgid 0 EnableUART got err 0
 [2016-02-03 21:47:32] AMU: cgid 0 SetDataCtrl got err 0
 [2016-02-03 21:47:32] AMU: cgid 0 SetBaud got err 4
 [2016-02-03 21:47:32] Send ANU voltage aab775de
 [2016-02-03 21:47:32] AMU 0: Send frequency 8208821c
 [2016-02-03 21:47:32] AMU0: GetResults (amt=0 err=-7 ern=16)
 [2016-02-03 21:47:32] AMU 0: Send freq getstatus 84000400
 [2016-02-03 21:47:33] AMU0: GetResults (amt=0 err=-7 ern=16)
 [2016-02-03 21:47:33] AU3 0: Detected Antminer U3
 [2016-02-03 21:47:33] AU30: GetResults (amt=0 err=-7 ern=16)
 [2016-02-03 21:47:33] Icarus Read: No data for 302 ms
 [2016-02-03 21:47:33] AU30: GetResults (amt=0 err=-7 ern=16)
 [2016-02-03 21:47:33] AU3: cgid 0 EnableUART got err 0
 [2016-02-03 21:47:33] AU3: cgid 0 SetDataCtrl got err 0
 [2016-02-03 21:47:33] AU3: cgid 0 SetBaud got err 4
 [2016-02-03 21:47:33] Send ANU voltage aab775de
 [2016-02-03 21:47:33] AU3 0: Send frequency 8208821c
 [2016-02-03 21:47:34] AU30: GetResults (amt=0 err=-7 ern=16)
 [2016-02-03 21:47:34] AU3 0: Send freq getstatus 84000400
 [2016-02-03 21:47:34] AU30: GetResults (amt=0 err=-7 ern=16)
 [2016-02-03 21:47:34] AU3 0: Detected Antminer U3
 [2016-02-03 21:47:34] AU30: GetResults (amt=0 err=-7 ern=16)
 [2016-02-03 21:47:34] Icarus Read: No data for 301 ms
 [2016-02-03 21:47:34] USB uninit AU30
 [2016-02-03 21:47:34] USB free AMU
 [2016-02-03 21:47:34] USB unlock Icarus 1-2
 [2016-02-03 21:47:34] ICA looking for ICA 067b:2303 but found 8087:0024 instead
 [2016-02-03 21:47:34] ICA looking for ICA 1fc9:0083 but found 8087:0024 instead
 [2016-02-03 21:47:34] RES: Icarus (1:2) lock=0
 [2016-02-03 21:47:34] ICA looking for AMU 10c4:ea60 but found 8087:0024 instead
 [2016-02-03 21:47:34] USB res unlock Icarus 1-2
 [2016-02-03 21:47:34] ICA looking for LIN 10c4:ea60 but found 8087:0024 instead
 [2016-02-03 21:47:34] ICA looking for ANU 10c4:ea60 but found 8087:0024 instead
 [2016-02-03 21:47:34] ICA looking for BLT 0403:6001 but found 8087:0024 instead
 [2016-02-03 21:47:34] ICA looking for LLT 0403:6001 but found 8087:0024 instead
 [2016-02-03 21:47:34] ICA looking for CMR 0403:6014 but found 8087:0024 instead
 [2016-02-03 21:47:34] ICA looking for CMR 0403:8350 but found 8087:0024 instead
 [2016-02-03 21:47:34] ICA looking for ICA 067b:2303 but found 8086:1c2d instead
 [2016-02-03 21:47:34] ICA looking for ICA 1fc9:0083 but found 8086:1c2d instead
 [2016-02-03 21:47:34] ICA looking for AMU 10c4:ea60 but found 8086:1c2d instead
 [2016-02-03 21:47:34] ICA looking for LIN 10c4:ea60 but found 8086:1c2d instead
 [2016-02-03 21:47:34] ICA looking for ANU 10c4:ea60 but found 8086:1c2d instead
 [2016-02-03 21:47:34] ICA looking for BLT 0403:6001 but found 8086:1c2d instead
 [2016-02-03 21:47:34] ICA looking for LLT 0403:6001 but found 8086:1c2d instead
 [2016-02-03 21:47:34] ICA looking for CMR 0403:6014 but found 8086:1c2d instead
 [2016-02-03 21:47:34] ICA looking for CMR 0403:8350 but found 8086:1c2d instead
 [2016-02-03 21:47:34] ICA looking for ICA 067b:2303 but found 8087:0024 instead
 [2016-02-03 21:47:34] ICA looking for ICA 1fc9:0083 but found 8087:0024 instead
 [2016-02-03 21:47:34] ICA looking for AMU 10c4:ea60 but found 8087:0024 instead
 [2016-02-03 21:47:34] ICA looking for LIN 10c4:ea60 but found 8087:0024 instead
 [2016-02-03 21:47:34] ICA looking for ANU 10c4:ea60 but found 8087:0024 instead
 [2016-02-03 21:47:34] ICA looking for BLT 0403:6001 but found 8087:0024 instead
 [2016-02-03 21:47:34] ICA looking for LLT 0403:6001 but found 8087:0024 instead
 [2016-02-03 21:47:34] ICA looking for CMR 0403:6014 but found 8087:0024 instead
 [2016-02-03 21:47:34] ICA looking for CMR 0403:8350 but found 8087:0024 instead
 [2016-02-03 21:47:34] ICA looking for ICA 067b:2303 but found 1a40:0101 instead
 [2016-02-03 21:47:34] ICA looking for ICA 1fc9:0083 but found 1a40:0101 instead
 [2016-02-03 21:47:34] ICA looking for AMU 10c4:ea60 but found 1a40:0101 instead
 [2016-02-03 21:47:34] ICA looking for LIN 10c4:ea60 but found 1a40:0101 instead
 [2016-02-03 21:47:34] ICA looking for ANU 10c4:ea60 but found 1a40:0101 instead
 [2016-02-03 21:47:34] ICA looking for BLT 0403:6001 but found 1a40:0101 instead
 [2016-02-03 21:47:34] ICA looking for LLT 0403:6001 but found 1a40:0101 instead
 [2016-02-03 21:47:34] ICA looking for CMR 0403:6014 but found 1a40:0101 instead
 [2016-02-03 21:47:34] ICA looking for CMR 0403:8350 but found 1a40:0101 instead
 [2016-02-03 21:47:34] ICA looking for ICA 067b:2303 but found 8086:1c26 instead
 [2016-02-03 21:47:34] ICA looking for ICA 1fc9:0083 but found 8086:1c26 instead
 [2016-02-03 21:47:34] ICA looking for AMU 10c4:ea60 but found 8086:1c26 instead
 [2016-02-03 21:47:34] ICA looking for LIN 10c4:ea60 but found 8086:1c26 instead
 [2016-02-03 21:47:34] ICA looking for ANU 10c4:ea60 but found 8086:1c26 instead
 [2016-02-03 21:47:34] ICA looking for BLT 0403:6001 but found 8086:1c26 instead
 [2016-02-03 21:47:34] ICA looking for LLT 0403:6001 but found 8086:1c26 instead
 [2016-02-03 21:47:34] ICA looking for CMR 0403:6014 but found 8086:1c26 instead
 [2016-02-03 21:47:34] ICA looking for CMR 0403:8350 but found 8086:1c26 instead
 [2016-02-03 21:47:34] USB scan devices: checking for KLN devices
 [2016-02-03 21:47:34] KLN looking for KLN 04d8:f60a but found 10c4:ea60 instead
 [2016-02-03 21:47:34] KLN looking for KLI 04d8:f60a but found 10c4:ea60 instead
 [2016-02-03 21:47:34] KLN looking for KLN 04d8:f60a but found 8087:0024 instead
 [2016-02-03 21:47:34] KLN looking for KLI 04d8:f60a but found 8087:0024 instead
 [2016-02-03 21:47:34] KLN looking for KLN 04d8:f60a but found 8086:1c2d instead
 [2016-02-03 21:47:34] KLN looking for KLI 04d8:f60a but found 8086:1c2d instead
 [2016-02-03 21:47:34] KLN looking for KLN 04d8:f60a but found 8087:0024 instead
 [2016-02-03 21:47:34] KLN looking for KLI 04d8:f60a but found 8087:0024 instead
 [2016-02-03 21:47:34] KLN looking for KLN 04d8:f60a but found 1a40:0101 instead
 [2016-02-03 21:47:34] KLN looking for KLI 04d8:f60a but found 1a40:0101 instead
 [2016-02-03 21:47:34] KLN looking for KLN 04d8:f60a but found 8086:1c26 instead
 [2016-02-03 21:47:34] KLN looking for KLI 04d8:f60a but found 8086:1c26 instead
 [2016-02-03 21:47:34] USB scan devices: checking for DRB devices
 [2016-02-03 21:47:34] DRB looking for DRB 03eb:2404 but found 10c4:ea60 instead
 [2016-02-03 21:47:34] DRB looking for DRB 03eb:2404 but found 8087:0024 instead
 [2016-02-03 21:47:34] DRB looking for DRB 03eb:2404 but found 8086:1c2d instead
 [2016-02-03 21:47:34] DRB looking for DRB 03eb:2404 but found 8087:0024 instead
 [2016-02-03 21:47:34] DRB looking for DRB 03eb:2404 but found 1a40:0101 instead
 [2016-02-03 21:47:34] DRB looking for DRB 03eb:2404 but found 8086:1c26 instead
 [2016-02-03 21:47:34] No devices detected!
 [2016-02-03 21:47:34] Waiting for USB hotplug devices or press q to quit
 [2016-02-03 21:47:34] Probing for an alive pool
 [2016-02-03 21:47:34] Testing pool stratum+tcp://stratum.antpool.com:443
 [2016-02-03 21:47:35] Succeeded delayed connect
 [2016-02-03 21:47:35] Pool 0 stratum session id: 911200001
 [2016-02-03 21:47:35] Pool 0 difficulty changed to 1024
 [2016-02-03 21:47:35] Pool 0 coinbase 01000000010000000000000000000000000000000000000000000000000000000000000000ffffffff2b03180d061e4d696e656420627920416e74506f6f6c20757361343425939e2056b291d39112000000000000ffffffff0100f90295000000001976a9142ef12bd2ac1416406d0e132e5bc8d0b02df
 [2016-02-03 21:47:36] Stratum authorisation success for pool 0
 [2016-02-03 21:47:36] Pool 0 stratum+tcp://stratum.antpool.com:443 alive
 [2016-02-03 21:47:36] Pool 0 coinbase 01000000010000000000000000000000000000000000000000000000000000000000000000ffffffff2b03180d061e4d696e656420627920416e74506f6f6c20757361343425939e2056b291d39112000000000000ffffffff0100f90295000000001976a9142ef12bd2ac1416406d0e132e5bc8d0b02df
 [2016-02-03 21:47:36] Work update message received
 [2016-02-03 21:47:36]  [Sele2016-c02ti-n0g3 2 p1ool:47 0 :for3 work
6] API not running - API will not be available
 [2016-02-03 21:47:36] Generated stratum merkle b03fe4091c6b1d6c814b7db9e336761f3c2640fb518e8b35d66bbc602c9dc468
 [2016-02-03 21:47:36] Generated stratum header 00000004a1d30354997616cf18960e0c98aac71c8e9caa29008da55c0000000000000000b03fe4091c6b1d6c814b7db9e336761f3c2640fb518e8b35d66bbc602c9dc46856b291d3180928f0000000000000008000000000000000000000000000000000000000000000000000000000
 [2016-02-03 21:47:36] Work job_id 1454543315 4014 nonce2 0 ntime 56b291d3
 [2016-02-03 21:47:36] Generated target 000000000000000000000000000000000000000000000000c0ff3f0000000000
 [2016-02-03 21:47:36] Generated stratum work
 [2016-02-03 21:47:36] Pushing work from pool 0 to hash queue
 [2016-02-03 21:47:36] Network diff set to 120G
 [2016-02-03 21:47:36] New block: 0000000000000000008da55c8e9caa2998aac71c18960e0c997616cfa1d30354... diff 120G
 [2016-02-03 21:47:36] Selecting pool 0 for work
 [2016-02-03 21:47:36] Generated stratum merkle dc8d7fb02202b6df44f52f4ee5f920aaff3db73582b86559b14cf735fea0de54
 [2016-02-03 21:47:36] Generated stratum header 00000004a1d30354997616cf18960e0c98aac71c8e9caa29008da55c0000000000000000dc8d7fb02202b6df44f52f4ee5f920aaff3db73582b86559b14cf735fea0de5456b291d3180928f0000000000000008000000000000000000000000000000000000000000000000000000000
 [2016-02-03 21:47:36] Work job_id 1454543315 4014 nonce2 1 ntime 56b291d3
 [2016-02-03 21:47:36] Generated target 000000000000000000000000000000000000000000000000c0ff3f0000000000
 [2016-02-03 21:47:36] Generated stratum work
 [2016-02-03 21:47:36] Pushing work from pool 0 to hash queue
 [2016-02-03 21:47:38] Discarded work
 [2016-02-03 21:47:38] (5s):0.000 (1m):0.000 (5m):0.000 (15m):0.000 (avg):0.000h/s
 [2016-02-03 21:47:38] Selecting pool 0 for work
 [2016-02-03 21:47:38] Generated stratum merkle e14eedbffe5c2ab4988df7c2eac82c3b2a1db1a466c465252c83c5f534c568e7
 [2016-02-03 21:47:38] Generated stratum header 00000004a1d30354997616cf18960e0c98aac71c8e9caa29008da55c0000000000000000e14eedbffe5c2ab4988df7c2eac82c3b2a1db1a466c465252c83c5f534c568e756b291d3180928f0000000000000008000000000000000000000000000000000000000000000000000000000
 [2016-02-03 21:47:38] Work job_id 1454543315 4014 nonce2 2 ntime 56b291d3
 [2016-02-03 21:47:38] Generated target 000000000000000000000000000000000000000000000000c0ff3f0000000000
 [2016-02-03 21:47:38] Generated stratum work
 [2016-02-03 21:47:38] Pushing work from pool 0 to hash queue
 [2016-02-03 21:47:40] Discarded work
 [2016-02-03 21:47:40] Selecting pool 0 for work
 [2016-02-03 21:47:40] Generated stratum merkle 6089ca645c4af8cfd3363931d9c81655ad6fe52688e43ef225ccd79055e32531
 [2016-02-03 21:47:40] Generated stratum header 00000004a1d30354997616cf18960e0c98aac71c8e9caa29008da55c00000000000000006089ca645c4af8cfd3363931d9c81655ad6fe52688e43ef225ccd79055e3253156b291d3180928f0000000000000008000000000000000000000000000000000000000000000000000000000
 [2016-02-03 21:47:40] Work job_id 1454543315 4014 nonce2 3 ntime 56b291d3
 [2016-02-03 21:47:40] Generated target 000000000000000000000000000000000000000000000000c0ff3f0000000000
 [2016-02-03 21:47:40] Generated stratum work
 [2016-02-03 21:47:40] Pushing work from pool 0 to hash queue
 [2016-02-03 21:47:41] USB scan devices: checking for AVA devices
 [2016-02-03 21:47:41] AVA looking for BTB 0403:6001 but found 10c4:ea60 instead
 [2016-02-03 21:47:41] AVA looking for BBF 0403:6001 but found 10c4:ea60 instead
 [2016-02-03 21:47:41] AVA looking for AVA 0403:6001 but found 10c4:ea60 instead
 [2016-02-03 21:47:41] AVA looking for BTB 0403:6001 but found 8087:0024 instead
 [2016-02-03 21:47:41] AVA looking for BBF 0403:6001 but found 8087:0024 instead
 [2016-02-03 21:47:41] AVA looking for AVA 0403:6001 but found 8087:0024 instead
 [2016-02-03 21:47:41] AVA looking for BTB 0403:6001 but found 8086:1c2d instead
 [2016-02-03 21:47:41] AVA looking for BBF 0403:6001 but found 8086:1c2d instead
 [2016-02-03 21:47:41] AVA looking for AVA 0403:6001 but found 8086:1c2d instead
 [2016-02-03 21:47:41] AVA looking for BTB 0403:6001 but found 8087:0024 instead
 [2016-02-03 21:47:41] AVA looking for BBF 0403:6001 but found 8087:0024 instead
 [2016-02-03 21:47:41] AVA looking for AVA 0403:6001 but found 8087:0024 instead
 [2016-02-03 21:47:41] AVA looking for BTB 0403:6001 but found 1a40:0101 instead
 [2016-02-03 21:47:41] AVA looking for BBF 0403:6001 but found 1a40:0101 instead
 [2016-02-03 21:47:41] AVA looking for AVA 0403:6001 but found 1a40:0101 instead
 [2016-02-03 21:47:41] AVA looking for BTB 0403:6001 but found 8086:1c26 instead
 [2016-02-03 21:47:41] AVA looking for BBF 0403:6001 but found 8086:1c26 instead
 [2016-02-03 21:47:41] AVA looking for AVA 0403:6001 but found 8086:1c26 instead
 [2016-02-03 21:47:41] USB scan devices: checking for AV2 devices
 [2016-02-03 21:47:42] AV2 looking for AV2 067b:2303 but found 10c4:ea60 instead
 [2016-02-03 21:47:42] AV2 looking for AV2 067b:2303 but found 8087:0024 instead
 [2016-02-03 21:47:42] AV2 looking for AV2 067b:2303 but found 8086:1c2d instead
 [2016-02-03 21:47:42] AV2 looking for AV2 067b:2303 but found 8087:0024 instead
 [2016-02-03 21:47:42] AV2 looking for AV2 067b:2303 but found 1a40:0101 instead
 [2016-02-03 21:47:42] AV2 looking for AV2 067b:2303 but found 8086:1c26 instead
 [2016-02-03 21:47:42] USB scan devices: checking for AV4 devices
 [2016-02-03 21:47:42] AV4 looking for AV4 29f1:33f2 but found 10c4:ea60 instead
 [2016-02-03 21:47:42] AV4 looking for AV4 29f1:33f2 but found 8087:0024 instead
 [2016-02-03 21:47:42] AV4 looking for AV4 29f1:33f2 but found 8086:1c2d instead
 [2016-02-03 21:47:42] AV4 looking for AV4 29f1:33f2 but found 8087:0024 instead
 [2016-02-03 21:47:42] AV4 looking for AV4 29f1:33f2 but found 1a40:0101 instead
 [2016-02-03 21:47:42] AV4 looking for AV4 29f1:33f2 but found 8086:1c26 instead
 [2016-02-03 21:47:42] USB scan devices: checking for BAS devices
 [2016-02-03 21:47:42] BAS looking for BAS 0403:6014 but found 10c4:ea60 instead
 [2016-02-03 21:47:42] BAS looking for BAS 0403:6014 but found 10c4:ea60 instead
 [2016-02-03 21:47:42] BAS looking for BMA 0403:6014 but found 10c4:ea60 instead
 [2016-02-03 21:47:42] BAS looking for BMA 0403:6014 but found 10c4:ea60 instead
 [2016-02-03 21:47:42] BAS looking for BMA 0403:6014 but found 10c4:ea60 instead
 [2016-02-03 21:47:42] BAS looking for BAS 0403:6014 but found 8087:0024 instead
 [2016-02-03 21:47:42] BAS looking for BAS 0403:6014 but found 8087:0024 instead
 [2016-02-03 21:47:42] BAS looking for BMA 0403:6014 but found 8087:0024 instead
 [2016-02-03 21:47:42] BAS looking for BMA 0403:6014 but found 8087:0024 instead
 [2016-02-03 21:47:42] BAS looking for BMA 0403:6014 but found 8087:0024 instead
 [2016-02-03 21:47:42] BAS looking for BAS 0403:6014 but found 8086:1c2d instead
 [2016-02-03 21:47:42] BAS looking for BAS 0403:6014 but found 8086:1c2d instead
 [2016-02-03 21:47:42] BAS looking for BMA 0403:6014 but found 8086:1c2d instead
 [2016-02-03 21:47:42] BAS looking for BMA 0403:6014 but found 8086:1c2d instead
 [2016-02-03 21:47:42] BAS looking for BMA 0403:6014 but found 8086:1c2d instead
 [2016-02-03 21:47:42] BAS looking for BAS 0403:6014 but found 8087:0024 instead
 [2016-02-03 21:47:42] BAS looking for BAS 0403:6014 but found 8087:0024 instead
 [2016-02-03 21:47:42] BAS looking for BMA 0403:6014 but found 8087:0024 instead
 [2016-02-03 21:47:42] BAS looking for BMA 0403:6014 but found 8087:0024 instead
 [2016-02-03 21:47:42] BAS looking for BMA 0403:6014 but found 8087:0024 instead
 [2016-02-03 21:47:42] BAS looking for BAS 0403:6014 but found 1a40:0101 instead
 [2016-02-03 21:47:42] BAS looking for BAS 0403:6014 but found 1a40:0101 instead
 [2016-02-03 21:47:42] BAS looking for BMA 0403:6014 but found 1a40:0101 instead
 [2016-02-03 21:47:42] BAS looking for BMA 0403:6014 but found 1a40:0101 instead
 [2016-02-03 21:47:42] BAS looking for BMA 0403:6014 but found 1a40:0101 instead
 [2016-02-03 21:47:42] BAS looking for BAS 0403:6014 but found 8086:1c26 instead
 [2016-02-03 21:47:42] BAS looking for BAS 0403:6014 but found 8086:1c26 instead
 [2016-02-03 21:47:42] BAS looking for BMA 0403:6014 but found 8086:1c26 instead
 [2016-02-03 21:47:42] BAS looking for BMA 0403:6014 but found 8086:1c26 instead
 [2016-02-03 21:47:42] BAS looking for BMA 0403:6014 but found 8086:1c26 instead
 [2016-02-03 21:47:42] USB scan devices: checking for BF1 devices
 [2016-02-03 21:47:42] Received kill message
 [2016-02-03 21:47:42] Killing off HotPlug thread
 [2016-02-03 21:47:42] Killing off watchpool thread
 [2016-02-03 21:47:42] Killing off watchdog thread
 [2016-02-03 21:47:42] Shutting down mining threads
 [2016-02-03 21:47:43] Killing off mining threads
 [2016-02-03 21:47:43] Killing off API thread
 [2016-02-03 21:47:43] Releasing all USB devices
 [2016-02-03 21:47:43] Killing off usbres thread
 [2016-02-03 21:47:43] Shutdown signal received.
 [2016-02-03 21:47:43] 
Summary of runtime statistics:

 [2016-02-03 21:47:43] Started at [2016-02-03 21:47:36]
 [2016-02-03 21:47:43] Pool: stratum+tcp://stratum.antpool.com:443
 [2016-02-03 21:47:43] Runtime: 0 hrs : 0 mins : 6 secs
 [2016-02-03 21:47:43] Average hashrate: 0.0 Mhash/s
 [2016-02-03 21:47:43] Solved blocks: 0
 [2016-02-03 21:47:43] Best share difficulty: 0
 [2016-02-03 21:47:43] Share submissions: 0
 [2016-02-03 21:47:43] Accepted shares: 0
 [2016-02-03 21:47:43] Rejected shares: 0
 [2016-02-03 21:47:43] Accepted difficulty shares: 0
 [2016-02-03 21:47:43] Rejected difficulty shares: 0
 [2016-02-03 21:47:43] Hardware errors: 0
 [2016-02-03 21:47:43] Utility (accepted shares / min): 0.00/min
 [2016-02-03 21:47:43] Work Utility (diff1 shares solved / min): 0.00/min

 [2016-02-03 21:47:43] Stale submissions discarded due to new blocks: 0
 [2016-02-03 21:47:43] Unable to get work from server occasions: 0
 [2016-02-03 21:47:43] Work items generated locally: 4
 [2016-02-03 21:47:43] Submitting work remotely delay occasions: 0
 [2016-02-03 21:47:43] New blocks detected on network: 1

 [2016-02-03 21:47:43] Summary of per device statistics:

 [2016-02-03 21:47:43]  
 [2016-02-03 21:47:43] Timed out waiting for data on socket_full
 [2016-02-03 21:47:43] Stratum connection to pool 0 interrupted
 [2016-02-03 21:47:43] Cleared 2 work items due to stratum disconnect on pool 0
 [2016-02-03 21:47:43] Closing socket for stratum pool 0
 [2016-02-03 21:47:43] Failed to getaddrinfo for stratum.antpool.com:443
 [2016-02-03 21:47:43] Initiate stratum failed
 [2016-02-03 21:47:43] Pool 0 stratum+tcp://stratum.antpool.com:443  n[o2t0 1r6-e0s2p-o0n3d i2n1g:!4
7:43] Selecting pool 0 for work
 [2016-02-03 21:47:43] Selecting pool 0 for work

Code:

 [2016-02-03 21:47:31] ICA looking for CMR 0403:8350 but found 8086:1c26 instead
 [2016-02-03 21:47:31] USB scan devices: checking for ICA devices
 [2016-02-03 21:47:31] ICA looking for ICA 067b:2303 but found 10c4:ea60 instead
 [2016-02-03 21:47:31] ICA looking for ICA 1fc9:0083 but found 10c4:ea60 instead
 [2016-02-03 21:47:31] ICA looking for and found AMU 10c4:ea60
 [2016-02-03 21:47:31] USB lock Icarus 1-2
 [2016-02-03 21:47:31] RES: Icarus (1:2) lock=1
 [2016-02-03 21:47:31] USB res lock Icarus 1-2
 [2016-02-03 21:47:31] RES: Icarus (1:2) lock ok=1
 [2016-02-03 21:47:31] USB init - AMU device 1:2 usbver=0110 prod='CP2102 USB to UART Bridge Controller' manuf='Silicon Labs' serial='0001'
 [2016-02-03 21:47:31] AMU0: GetResults (amt=0 err=-7 ern=16)
 [2016-02-03 21:47:31] AMU: cgid 0 EnableUART got err 0
 [2016-02-03 21:47:31] AMU: cgid 0 SetDataCtrl got err 0
 [2016-02-03 21:47:31] AMU: cgid 0 SetBaud got err 4
 [2016-02-03 21:47:31] AMU0: GetResults (amt=0 err=-7 ern=16)
 [2016-02-03 21:47:31] Icarus Read: No data for 301 ms
 [2016-02-03 21:47:31] AMU0: GetResults (amt=0 err=-7 ern=16)
 [2016-02-03 21:47:31] AMU: cgid 0 EnableUART got err 0
 [2016-02-03 21:47:31] AMU: cgid 0 SetDataCtrl got err 0
 [2016-02-03 21:47:31] AMU: cgid 0 SetBaud got err 4
 [2016-02-03 21:47:32] AMU0: GetResults (amt=0 err=-7 ern=16)
 [2016-02-03 21:47:32] Icarus Read: No data for 302 ms
 [2016-02-03 21:47:32] AMU0: GetResults (amt=0 err=-7 ern=16)
 [2016-02-03 21:47:32] AMU: cgid 0 EnableUART got err 0
 [2016-02-03 21:47:32] AMU: cgid 0 SetDataCtrl got err 0
 [2016-02-03 21:47:32] AMU: cgid 0 SetBaud got err 4
 [2016-02-03 21:47:32] Send ANU voltage aab775de
 [2016-02-03 21:47:32] AMU 0: Send frequency 8208821c
 [2016-02-03 21:47:32] AMU0: GetResults (amt=0 err=-7 ern=16)
 [2016-02-03 21:47:32] AMU 0: Send freq getstatus 84000400
 [2016-02-03 21:47:33] AMU0: GetResults (amt=0 err=-7 ern=16)
 [2016-02-03 21:47:33] AU3 0: Detected Antminer U3
 [2016-02-03 21:47:33] AU30: GetResults (amt=0 err=-7 ern=16)
 [2016-02-03 21:47:33] Icarus Read: No data for 302 ms
 [2016-02-03 21:47:33] AU30: GetResults (amt=0 err=-7 ern=16)
 [2016-02-03 21:47:33] AU3: cgid 0 EnableUART got err 0
 [2016-02-03 21:47:33] AU3: cgid 0 SetDataCtrl got err 0
 [2016-02-03 21:47:33] AU3: cgid 0 SetBaud got err 4
 [2016-02-03 21:47:33] Send ANU voltage aab775de
 [2016-02-03 21:47:33] AU3 0: Send frequency 8208821c
 [2016-02-03 21:47:34] AU30: GetResults (amt=0 err=-7 ern=16)
 [2016-02-03 21:47:34] AU3 0: Send freq getstatus 84000400
 [2016-02-03 21:47:34] AU30: GetResults (amt=0 err=-7 ern=16)
 [2016-02-03 21:47:34] AU3 0: Detected Antminer U3
 [2016-02-03 21:47:34] AU30: GetResults (amt=0 err=-7 ern=16)
 [2016-02-03 21:47:34] Icarus Read: No data for 301 ms
 [2016-02-03 21:47:34] USB uninit AU30
 [2016-02-03 21:47:34] USB free AMU
 [2016-02-03 21:47:34] USB unlock Icarus 1-2
 [2016-02-03 21:47:34] ICA looking for ICA 067b:2303 but found 8087:0024 instead
 [2016-02-03 21:47:34] ICA looking for ICA 1fc9:0083 but found 8087:0024 instead
 [2016-02-03 21:47:34] RES: Icarus (1:2) lock=0
 [2016-02-03 21:47:34] ICA looking for AMU 10c4:ea60 but found 8087:0024 instead
 [2016-02-03 21:47:34] USB res unlock Icarus 1-2
 [2016-02-03 21:47:34] ICA looking for LIN 10c4:ea60 but found 8087:0024 instead
 [2016-02-03 21:47:34] ICA looking for ANU 10c4:ea60 but found 8087:0024 instead
...
 [2016-02-03 21:47:34] No devices detected!
 [2016-02-03 21:47:34] Waiting for USB hotplug devices or press q to quit

[Riseman]

Seems like cgminer can't find the U3. Actually, the official manual explains the setup procedure quite well. Maybe you should go through all the steps once more and check if everything is done correctly.

[zOU]

Seems like cgminer can't find the U3. Actually, the official manual explains the setup procedure quite well. Maybe you should go through all the steps once more and check if everything is done correctly.

I agree:

1- read the first post and follow the install procedure
2- run cgminer --benchmark to validate hashing
3- if fails, unplug/replug the U3 while cgminer is running
4- if fails: check you plug USB first, then power in the U3 while cgminer is running
5- if ok: check your pool settings

[winterjak]

I recently setup 2 U3 v2's and I have them running on my mac osx. I am using bfgminer, for some reason I can't get cgminer to work, and both u3's are going no faster than 5 gh/s, top speed i've seen has been 10 gh/s each. Whats the best way to overclock them on a mac?

[wladston]

My Antminer U3 never work properly, since day one. When I first unboxed it, it would always hash, but never accepting higher overclocks, no matter what I did. The max I could get was about 40GH/s, but when using these frequencies, it would always go ZOMBIE super fast. When I tried higher overclocking, the fan would spin slower and it would keep making very strange, high pitch sounds. The higher the frequency that didn't work, the higher the pich of the noise would be.

Then I ran it stable hashing at about 27GH/s for 6 to 5 weeks. It would still go ZOMBIE from time to time, but a reboot solved it.

Recently, however, it stopped working altogether. When I plug it to power, the fan will spin normally and the red leds light normally, but cgminer fails to detect it. Once it's plugged to USB it makes some very quiet, ticking sounds, while the fan spin at slower speeds. Then the ticking stops and the fan goes to normal speed, but the U3 isn't picked up by cgminer. On the rare occasions it is, it doesn't produce even a single valid share, slowly reducing reported hashrate on cgminer, until it finally goes ZOMBIE.

No matter what I do, I cannot get this device to produce even a single valid share. Is it really dead, or is there any salvation to it?

I'm using Ubuntu Linux as a Host, with cgminer 4.9.0, latest commit from bitmaintech's master branch. I also tried cgminer 4.9.2 from ckolivas' master branch, with the same unhappy results. I tried compiling with both static and dynamic libusb.

This is how the device is behaving right now:


Is there any official Bitmain support channel? Is there any debug/troubleshooting guide for this device? How can I confirm that this device has completed its transformation into a nerdy paperweight?

Thanks a lot!