|
ehalvers
|
 |
December 20, 2014, 03:55:41 AM |
|
You must be not be familiar with growing marijuana with LED Lights and Solar panels bamsterdam, I don't think CANNdy is a loss considering I grew and I made all my money back on panels, lights, nutrients. With 12 plants, there was more than enough to go around for patients
One of the drawbacks for LED's can be the initial start-up cost  Many of the well made panels that put out what they advertise can cost up to 3-4$ a watt. And some panels have light spectrums that aren't exactly used by the plant efficiently (uv, if). And many people are getting ripped off on eBay buying "300" watt panels that pull 130-150 from the wall including fans. I bet having solar panels makes power consumption a lot less of a concern though  It is a new and emerging market and will go through many trials and tribulations before consumers are taken care of properly. One of the things people are doing is making there own panels using COB (chip-on-board) technology with white light targeting spectrums and getting some pretty amazing results. Check out rollitup.org 's LED section. Some awesome guys over there making great guides on DIY LED's. And don't worry about bud prices being high. I think in a few years the price will plummet with all the surplus MMJ that will be coming to markets. (I could be talking out of my ass on that one  ) |
|
|
|
|
|
|
|
|
ehalvers
|
|
December 20, 2014, 07:59:13 AM |
|
www.hydroponicshut.comGrow with both of these pro grow x-5 300 and pro grow 260 were used in this garden also have some www.advancedledlights.com diamond series that grow VERBATIM to hydroponicshut.com LED lights. Both LED lights have IR and UV LEDs in them. I would say regardless if the LED light has UV and IR, doesn't hurt at all, do you complain about marijuana being grown in the sun? I don't mind having a full spectrum light Nothing can quite beat the power of the Sun  Just said those wavelengths may not be used as efficiently as others (heat and perspiration due to the amount of energy needed to convert those wavelengths to usable energy) Awesome looking buds man strain? Advanced LED's is definitely showing some promise. Been seeing some great stuff growing under their lights. |
|
|
|
synapse_showsumctrl
Newbie
 Offline
Activity: 14
Merit: 0
|
|
December 20, 2014, 02:01:44 PM |
|
Strain was J1 OG KUSH from San Diego.
I would have to say Efficiency was excellent, 450WATTS from wall plug with a KILL-A-WATT, and had to use only 5 gallons of water every other day on the watering for all 12 plants.
|
|
|
|
|
|
|
garyknox74
Member
Offline
Activity: 79
Merit: 10
|
|
December 20, 2014, 07:51:59 PM |
|
Just checked that link and it works fine for me. |
|
|
|
|
brookefinancial
|
|
December 20, 2014, 09:28:09 PM
Last edit: December 20, 2014, 09:42:06 PM by brookefinancial |
|
Good to see the update from DeltaNine! I was down at ISG 3D last night again, we finished the render for the 3D printed CANN CannabisCoin box! It also comes in package deal with the Large Grinder you guys saw. The weed stash and the large grinder for 25$, you can leave my friend a message at ISG3D.com if you're interested! By the way I want to thank those of you who sent us a message and didn't hesitate to pay in CANN CannabisCoin to show support. Thanks! https://twitter.com/ISG3D/status/545187676987854848This looks great, interested in the large grinders, but does it have CannabisCoin written on it anywhere? Also do you ship outside the US? cheers Haha yeah I saw there is a strong demand on twitter for a #YESWECANN grinder! It's very easy to add text to the 3D render and I think it's a good idea. We have no problem shipping outside the US, we will look for the shipping cost, what country exactly? Of course there is more delay outside US and Canada.... (2-3 weeks shipping I think). I'm in the UK right now, 2-3 weeks is ok. Got some friends here mining CANN all smokers bet they will want CANN grinders too. Let us know when it's branded up will put some orders in So my friend at ISG3D sent me some pictures, the first 3D render he sent me is with "YesWeCann" written on the front of the box. I was thinking maybe it would be better it the "YesWeCann" is written on the top of the box. By the way, as you can see, the top is "slidable". Like I said earlier, the large grinder + the box is 25$, the box is pretty cool, I really like the final result. The one he printed didn't have the text on it yet.    Suggestions? Is it better to write "CannabisCoin"? "YesWeCann"? We will make the modifications on the grinders too. Thanks again, we will keep you updated. |
3D Printing and Bitcoin, that's pretty cool.
|
|
|
|
tukho
|
|
December 21, 2014, 08:15:49 AM |
|
prices are still going down mean?  |
|
|
|
|
|
brookefinancial
|
|
December 21, 2014, 10:39:58 AM |
|
Looking way better this way, btw I saw the box today it is pretty cool and suprisingly large. I really like the look. On the picture it looked smaller than I thought. We'll be showing a grinder and a box with the YesWeCann this week.    Happy holidays to yall! |
3D Printing and Bitcoin, that's pretty cool.
|
|
|
|
Havelivi
|
|
December 21, 2014, 10:59:03 AM |
|
still holding and buying more, hope soon promotion will start and we will hear great news from Dev.
|
|
|
|
|
Virtuoso
Legendary
Offline
Activity: 1120
Merit: 1002
|
|
December 21, 2014, 12:04:50 PM |
|
Today is Block halving... |
|
|
|
|
|
tukho
|
|
December 21, 2014, 12:07:36 PM |
|
Today is Block halving... and also cut in half |
|
|
|
|
|
BlockaFett
|
|
December 21, 2014, 01:33:48 PM |
|
Good to see the update from DeltaNine! I was down at ISG 3D last night again, we finished the render for the 3D printed CANN CannabisCoin box! It also comes in package deal with the Large Grinder you guys saw. The weed stash and the large grinder for 25$, you can leave my friend a message at ISG3D.com if you're interested! By the way I want to thank those of you who sent us a message and didn't hesitate to pay in CANN CannabisCoin to show support. Thanks! https://twitter.com/ISG3D/status/545187676987854848This looks great, interested in the large grinders, but does it have CannabisCoin written on it anywhere? Also do you ship outside the US? cheers Haha yeah I saw there is a strong demand on twitter for a #YESWECANN grinder! It's very easy to add text to the 3D render and I think it's a good idea. We have no problem shipping outside the US, we will look for the shipping cost, what country exactly? Of course there is more delay outside US and Canada.... (2-3 weeks shipping I think). I'm in the UK right now, 2-3 weeks is ok. Got some friends here mining CANN all smokers bet they will want CANN grinders too. Let us know when it's branded up will put some orders in So my friend at ISG3D sent me some pictures, the first 3D render he sent me is with "YesWeCann" written on the front of the box. I was thinking maybe it would be better it the "YesWeCann" is written on the top of the box. By the way, as you can see, the top is "slidable". Like I said earlier, the large grinder + the box is 25$, the box is pretty cool, I really like the final result. The one he printed didn't have the text on it yet. Suggestions? Is it better to write "CannabisCoin"? "YesWeCann"? We will make the modifications on the grinders too. Thanks again, we will keep you updated. cool. my vote would be for the writing 'CannabisCoin' on there |
|
|
|
|
groggin
Legendary
Offline
Activity: 1894
Merit: 1001
|
|
December 21, 2014, 01:36:26 PM |
|
get best of both pls: yes we cann on the top, cannabiscoin on the sides or ends |
|
|
|
|
0bert
|
|
December 21, 2014, 01:45:15 PM |
|
get best of both pls: yes we cann on the top, cannabiscoin on the sides or ends This! Anyhow, both pls! |
|
|
|
|
|
NobodyYouKnow
|
|
December 21, 2014, 06:21:08 PM |
|
It may be in a month or a year, but CANN has to be worth at least 1-10 USD each and possibly more once the maximum amount is reached of 92 million coins and/or once more clients want Canndy Kush than speculators are willing to let go; which could lead us down to 20-40 USD each, but that could be in 2-3 years realistically.
|
|
|
|
|
0bert
|
|
December 21, 2014, 06:33:57 PM |
|
It may be in a month or a year, but CANN has to be worth at least 1-10 USD each and possibly more once the maximum amount is reached of 92 million coins and/or once more clients want Canndy Kush than speculators are willing to let go; which could lead us down to 20-40 USD each, but that could be in 2-3 years realistically.
True! If coffeeshops in amsterdam will accept CANN if think we could reach 5-15$ in one year. Time will tell... E: Don't get me wrong, it's not about amsterdam, as we know what's going on in the US. But it would be a good boost imo. Anywhow, YESWECANN  |
|
|
|
|
cevarius
Member
Offline
Activity: 109
Merit: 10
|
|
December 21, 2014, 11:27:14 PM |
|
prices are still going down mean? Prices going down means cheaper meds for patients! |
|
|
|
|
|
tukho
|
|
December 22, 2014, 06:00:30 AM |
|
|
|
|
|
|
|
