evool
Newbie
Offline
Activity: 1
Merit: 0
|
|
February 24, 2015, 09:12:57 PM |
|
You have to add #xnsub to the pool server line for it to take effect. Setting 2 in the settings only makes extranonce subscription available for use, adding #xnsub to the URL enables it for the pool.
|
|
|
|
philipma1957 (OP)
Legendary
Offline
Activity: 4284
Merit: 8706
'The right to privacy matters'
|
|
February 24, 2015, 09:26:01 PM |
|
screen shot your pool needs that for it to work
|
|
|
|
bigblind
|
|
February 24, 2015, 09:41:19 PM |
|
Thanks! That helped
|
|
|
|
bigblind
|
|
February 24, 2015, 10:53:50 PM |
|
unfortunately im still having issues changing fanspeed.. I already found the /etc/mg_custom_mode but I cant save it... or after all it just doesnt safe the input settings
can anybody tell me please step by step, how to change it via ssh?
cd /var/www/SP2x/ sed -i 's/($i = 10; $i < 101; $i += 10)/($i = 01; $i < 101; $i += 01)/' settings.php
that one just does nothing
|
|
|
|
dmeter
|
|
February 24, 2015, 11:11:22 PM |
|
.
|
|
|
|
bigblind
|
|
February 24, 2015, 11:13:33 PM |
|
ok, I already figured out how to use Vi... with WinSCP i couldnt even log into the devices
|
|
|
|
dmeter
|
|
February 24, 2015, 11:17:19 PM |
|
ok, I already figured out how to use Vi... with WinSCP i couldnt even log into the devices File protocol SCP. your adress of miner port 22 user root your pasword
|
|
|
|
dmeter
|
|
February 24, 2015, 11:19:22 PM |
|
ok, I already figured out how to use Vi... with WinSCP i couldnt even log into the devices windows user
|
|
|
|
bigblind
|
|
February 24, 2015, 11:25:28 PM |
|
:d thank you very much.
Do I need to reboot the device afterwards or does it take effect when just restarting miner?
|
|
|
|
klondike_bar
Legendary
Offline
Activity: 2128
Merit: 1005
ASIC Wannabe
|
|
February 25, 2015, 12:22:00 AM |
|
anybody knows how to set the fans lower than 10 Percent? Is there a way to ssh it?
ssh vi /etc/mg_custom_mode its right in there, change the value to whatever you like. (the Sp20 is very managable around 4%)
|
|
|
|
CerebralEdge
Newbie
Offline
Activity: 37
Merit: 0
|
|
February 25, 2015, 07:34:41 AM |
|
I just finished setting up my new SP20 Nano farm up in the basement. I used a d-link DIR-615 with dd-wrt installed to make a client bridge and hooked all the SP20's up with ethernet from the router. https://i.imgur.com/Lv4T3eI.jpgDownloaded firmware 2.6.14, set voltages to 0.62 startup and 0.636 max. Getting about 1125GH/s per unit at ~590W. Running 2 on a 1300W PSU and the other on a 1000W PSU. Fan speed at 20% seems to keep all ASICs at 85c and exit temps at 60c for the top shelf unit. You can't even really hear them at all upstairs unless you stand by the stairway. Definitely pleased with this purchase!
|
|
|
|
bigblind
|
|
February 25, 2015, 11:07:01 AM |
|
So I have right now running 2 SP20 running off a EVGA G2 1300w. Theyre showing "wall watts at about 620-640 watts" each. Is it too much? They hash at about 1170-1190Gh/s.
|
|
|
|
philipma1957 (OP)
Legendary
Offline
Activity: 4284
Merit: 8706
'The right to privacy matters'
|
|
February 25, 2015, 01:57:40 PM |
|
I just finished setting up my new SP20 Nano farm up in the basement. I used a d-link DIR-615 with dd-wrt installed to make a client bridge and hooked all the SP20's up with ethernet from the router. Downloaded firmware 2.6.14, set voltages to 0.62 startup and 0.636 max. Getting about 1125GH/s per unit at ~590W. Running 2 on a 1300W PSU and the other on a 1000W PSU. Fan speed at 20% seems to keep all ASICs at 85c and exit temps at 60c for the top shelf unit. You can't even really hear them at all upstairs unless you stand by the stairway. Definitely pleased with this purchase! good I hope you do well with them.
|
|
|
|
alh
Legendary
Offline
Activity: 1846
Merit: 1052
|
|
February 25, 2015, 04:34:43 PM |
|
So I have right now running 2 SP20 running off a EVGA G2 1300w. Theyre showing "wall watts at about 620-640 watts" each. Is it too much? They hash at about 1170-1190Gh/s.
The "wall watt" figure on the "ASIC Status" screen is an estimate, which is calculated using what the mining hardware knows about it's internal consumption. My limited experience of 1 SP20 shows that figure to be higher than what I measure at the wall. I run an EVGA 1000W G2 which I think is more efficient than the calculation anticipates. I expect that your 620-640 would actually be under 600 at the wall if you measured it. I think you are fine.
|
|
|
|
ChineseSavior
|
|
February 25, 2015, 06:30:34 PM |
|
welll no moer sp20 for sale................
gotta shell out 2gs for the carrier grade now.
bitmain is a joke these days you cant even buy any minors except the usb 1's
is avalon minors a scam?
|
|
|
|
Marvell1
Legendary
Offline
Activity: 2576
Merit: 1136
Leading Crypto Sports Betting & Casino Platform
|
|
February 25, 2015, 06:35:37 PM |
|
welll no moer sp20 for sale................
gotta shell out 2gs for the carrier grade now.
bitmain is a joke these days you cant even buy any minors except the usb 1's
is avalon minors a scam?
SO sad .. home mining is dead
|
..Stake.com.. | | | ▄████████████████████████████████████▄ ██ ▄▄▄▄▄▄▄▄▄▄ ▄▄▄▄▄▄▄▄▄▄ ██ ▄████▄ ██ ▀▀▀▀▀▀▀▀▀▀ ██████████ ▀▀▀▀▀▀▀▀▀▀ ██ ██████ ██ ██████████ ██ ██ ██████████ ██ ▀██▀ ██ ██ ██ ██████ ██ ██ ██ ██ ██ ██ ██████ ██ █████ ███ ██████ ██ ████▄ ██ ██ █████ ███ ████ ████ █████ ███ ████████ ██ ████ ████ ██████████ ████ ████ ████▀ ██ ██████████ ▄▄▄▄▄▄▄▄▄▄ ██████████ ██ ██ ▀▀▀▀▀▀▀▀▀▀ ██ ▀█████████▀ ▄████████████▄ ▀█████████▀ ▄▄▄▄▄▄▄▄▄▄▄▄███ ██ ██ ███▄▄▄▄▄▄▄▄▄▄▄▄ ██████████████████████████████████████████ | | | | | | ▄▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▄ █ ▄▀▄ █▀▀█▀▄▄ █ █▀█ █ ▐ ▐▌ █ ▄██▄ █ ▌ █ █ ▄██████▄ █ ▌ ▐▌ █ ██████████ █ ▐ █ █ ▐██████████▌ █ ▐ ▐▌ █ ▀▀██████▀▀ █ ▌ █ █ ▄▄▄██▄▄▄ █ ▌▐▌ █ █▐ █ █ █▐▐▌ █ █▐█ ▀▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▀█ | | | | | | ▄▄█████████▄▄ ▄██▀▀▀▀█████▀▀▀▀██▄ ▄█▀ ▐█▌ ▀█▄ ██ ▐█▌ ██ ████▄ ▄█████▄ ▄████ ████████▄███████████▄████████ ███▀ █████████████ ▀███ ██ ███████████ ██ ▀█▄ █████████ ▄█▀ ▀█▄ ▄██▀▀▀▀▀▀▀██▄ ▄▄▄█▀ ▀███████ ███████▀ ▀█████▄ ▄█████▀ ▀▀▀███▄▄▄███▀▀▀ | | | ..PLAY NOW.. |
|
|
|
Dr Charles
Legendary
Offline
Activity: 1708
Merit: 1080
|
|
February 25, 2015, 07:01:57 PM |
|
people have been saying that home mining is dead since the first ASIC's were announced haha
Home mining is definitely not dead... just a little more difficult.
|
|
|
|
ChineseSavior
|
|
February 25, 2015, 07:08:46 PM |
|
its not dead just noody is releasing any machines. im screwed
|
|
|
|
Dr Charles
Legendary
Offline
Activity: 1708
Merit: 1080
|
|
February 25, 2015, 07:21:01 PM |
|
its not dead just noody is releasing any machines. im screwed
Bitmain will be either releasing a new miner or an upgrade for the S2 shortly that they say will be drawing only .4 watts per GH at the wall. Spondoolies is in the process of making their Gen3 hardware which will be more for industrial size miners but they said if the market is there for a home miner (which it is) then they will look at making a gen 3 home miner as well. ASICMiner is designed their next gen as well but as long as it is better than the prisma and not such a fire hazard then it should be pretty competitive.
|
|
|
|
samsonn25
|
|
February 25, 2015, 07:21:48 PM |
|
Its getting very expensive because of a monopoly of the technology, or lack or competition, or monopolizing the the industry because of trade secrets and cost of development, to mine a speculative crypto currency.
|
|
|
|
|