shadow2
Newbie
Offline
Activity: 17
Merit: 0
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
April 10, 2015, 10:08:47 PM |
|
notbatman and opentoe thanks for the tip. by having a look at that I noticed i was getting a load of invalid voltage errors. on investigating it seems if you alter the frequency the voltage for the chips gets wiped from the user config even though there isn't an option to do anything with the voltage.
|
|
|
|
opentoe
Legendary
Offline
Activity: 1274
Merit: 1000
Personal text my ass....
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
April 11, 2015, 12:57:48 AM |
|
Weeks have gone by, but the price is still the same. I thought Bitmain changed price all the time? As we all go further down the rabbit hole, you'd think there would have been a price decrease. Although, the last hardware my father received was dusty, dirty and used. Was supposed to be a new S5. Not a used one.
|
|
|
|
Mikestang
Legendary
Offline
Activity: 1274
Merit: 1000
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
April 11, 2015, 02:15:58 AM |
|
I miss the old getwork protocol and the ability to monitor stats real-time via the cgminer user interface. Are there more robust versions of cgminer available I can upload and run from the shell command line?
You can use cryptoGlance to monitor all your machines on one screen, I just started using it, great little program: https://bitcointalk.org/index.php?topic=569924.0does it work on Mac? I'm not sure, check their thread and ask.
|
|
|
|
aarons6
Legendary
Offline
Activity: 1736
Merit: 1006
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
April 11, 2015, 03:07:31 AM Last edit: April 11, 2015, 06:42:47 AM by aarons6 |
|
so i just got this fan in the mail http://www.amazon.com/Delta-TFC1212DE-PWM-120mm-Speed-Sensor/dp/B008NZSUPQ/ref=pd_cp_pc_2i put it on the back and its running full speed.. its not doing pwm. any ideas? so i thought that it was maybe overloading the fan controller, so i pulled the tac and pwm wire from the plug and plugged the fan red and black wires directly into a molex adapter.. and plugged the yellow and blue wire into the board on the s5. the s5 sees the fan, spinning at 4800 rpm.. but its not adjusting the speed. oh and i might have another problem, when i picked up my s5 this was on the floor.. it looks like it was there for awhile. ![](https://ip.bitcointalk.org/?u=https%3A%2F%2Ffarm9.staticflickr.com%2F8755%2F16917425838_3c3b233943_b.jpg&t=665&c=pHPlTkcG2IL-Fw) edit.. so after checking around, and plugging this fan into my motherboard with the molex adapter and pwm on the board.. it seems this fan has an inverted pwm controller.. 100% is 0 and 0% is full speed.. im not sure if this can be switched in the software of the s5.. or any other way.
|
|
|
|
|
aarons6
Legendary
Offline
Activity: 1736
Merit: 1006
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
April 11, 2015, 07:52:01 AM |
|
swap what pins?? i dont think swapping the fan pins will have the effect im looking for.
|
|
|
|
dogie
Legendary
Offline
Activity: 1666
Merit: 1185
dogiecoin.com
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
April 11, 2015, 09:00:19 AM |
|
swap what pins?? i dont think swapping the fan pins will have the effect im looking for. Sorry, you're correct, I misread what you posted initially. I though you meant the PWM and sensing wires were reversed.
|
|
|
|
aarons6
Legendary
Offline
Activity: 1736
Merit: 1006
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
April 11, 2015, 09:27:53 AM |
|
Sorry for my paint skills but i think i need to make this for my fan to work correctly.. any electrical engineers in here to check my work? ![](https://ip.bitcointalk.org/?u=https%3A%2F%2Ffarm9.staticflickr.com%2F8756%2F16899725427_66cf67fc0c_b.jpg&t=665&c=zY_8soV5yNgz_Q) not sure if that L7805 will get too hot.. also im not sure what the value of R2 should be.. or maybe it doesnt matter? the higher level of R2 the slower the fan will run, i think? the transistor is 2n2222 or something? NPN i think?
|
|
|
|
anamichii
Sr. Member
![*](https://bitcointalk.org/Themes/custom1/images/star.gif) ![*](https://bitcointalk.org/Themes/custom1/images/star.gif) ![*](https://bitcointalk.org/Themes/custom1/images/star.gif)
Offline
Activity: 287
Merit: 250
Global economic crisis? i hold my bitcoin..
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
April 11, 2015, 10:54:04 AM Last edit: April 11, 2015, 11:30:04 AM by anamichii |
|
Sorry for my paint skills but i think i need to make this for my fan to work correctly.. any electrical engineers in here to check my work? ![](https://ip.bitcointalk.org/?u=https%3A%2F%2Ffarm9.staticflickr.com%2F8756%2F16899725427_66cfddf67fc0c_b.jpg&t=665&c=-f8_YMmkLGLuWQ) not sure if that L7805 will get too hot.. also im not sure what the value of R2 should be.. or maybe it doesnt matter? the higher level of R2 the slower the fan will run, i think? the transistor is 2n2222 or something? NPN i think? L7805 will get too hot.. this is my antminer s5 fan controller layout : ![](https://ip.bitcointalk.org/?u=http%3A%2F%2Fimage.azuza.web.id%2Fimages%2Fpcb-1428749349.jpg&t=665&c=KDLbN8jqU8Xi2Q) and this is the controller : ![](https://ip.bitcointalk.org/?u=http%3A%2F%2Fimage.azuza.web.id%2Fimages%2Fjadi-1428749574.jpg&t=665&c=sP6NrYYpH-HZng) you can see the result in my youtube video here : https://www.youtube.com/watch?v=UUMfP6xlgFo
|
|
|
|
soy
Legendary
Offline
Activity: 1428
Merit: 1013
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
April 11, 2015, 02:23:32 PM Last edit: April 11, 2015, 02:47:10 PM by soy |
|
I tried running the pull fan on a problem S3 at full speed and found that to get it done and still have speed readings I had to cut the blue wire and bring that from the fan to the supply 12v while leaving the hashboard blue wire dead ended.
I bought a PWM speed controller from China and was going to put the output to the blue wire and have an adjustable fan speed control with normal speed feedback to the GUI. But, since I wanted to troubleshoot the problem S3 I put it back to stock and haven't attempted the variable speed yet. I decided I wanted to get some connectors so as not to cut the wires as the fans don't have a lot of extra lead length. Also, summer is on its way and I may just want full speed on fans so then I might be better off with a simple SPDT toggle on each fan for hashboard dictated speed or full speed.
I wonder why on the S3's there are two different fan speeds. When I added a pull fan to my S5 I took its power from the 12v supply without concern for variable speed. The fan cable splitters on ebay would seem good for adding a fan to an S5, again why two fan speeds. And on an S3 the splitter could be put to the board with faster fan and then have a SPST toggling the fans' blue wire from either the hashboard blue wire output or to supply 12v. Think I'll order some now, give it a try and then if I'm happy with the option I'll put it on all my miners for the summer. Though mid-summer I may be shutting down during the day and only running at night, remains to be seen.
|
|
|
|
aarons6
Legendary
Offline
Activity: 1736
Merit: 1006
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
April 11, 2015, 06:30:21 PM |
|
Sorry for my paint skills but i think i need to make this for my fan to work correctly.. any electrical engineers in here to check my work? ![](https://ip.bitcointalk.org/?u=https%3A%2F%2Ffarm9.staticflickr.com%2F8756%2F16899725427_66cfddf67fc0c_b.jpg&t=665&c=-f8_YMmkLGLuWQ) not sure if that L7805 will get too hot.. also im not sure what the value of R2 should be.. or maybe it doesnt matter? the higher level of R2 the slower the fan will run, i think? the transistor is 2n2222 or something? NPN i think? L7805 will get too hot.. this is my antminer s5 fan controller layout : ![](https://ip.bitcointalk.org/?u=http%3A%2F%2Fimage.azuza.web.id%2Fimages%2Fpcb-1428749349.jpg&t=665&c=KDLbN8jqU8Xi2Q) and this is the controller : ![](https://ip.bitcointalk.org/?u=http%3A%2F%2Fimage.azuza.web.id%2Fimages%2Fjadi-1428749574.jpg&t=665&c=sP6NrYYpH-HZng) you can see the result in my youtube video here : https://www.youtube.com/watch?v=UUMfP6xlgFoi was trying to keep it pwm. i suppose i can run the 5v from the molex and not use the L7805.
|
|
|
|
scyth33
Member
![*](https://bitcointalk.org/Themes/custom1/images/star.gif)
Offline
Activity: 99
Merit: 10
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
April 11, 2015, 07:42:01 PM |
|
one of my hashboard has failed once again, sent for RMA. this is the status for the other hashboard. is the HW error too high? ![](https://ip.bitcointalk.org/?u=http%3A%2F%2Fs9.postimg.org%2Fod5lesbzh%2FScreen_Shot_2015_04_12_at_3_39_33_am.png&t=665&c=9nVpGfmj1aZOQQ)
|
|
|
|
klondike_bar
Legendary
Offline
Activity: 2128
Merit: 1005
ASIC Wannabe
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
April 11, 2015, 07:56:06 PM |
|
one of my hashboard has failed once again, sent for RMA. this is the status for the other hashboard. is the HW error too high? ![](https://ip.bitcointalk.org/?u=http%3A%2F%2Fs9.postimg.org%2Fod5lesbzh%2FScreen_Shot_2015_04_12_at_3_39_33_am.png&t=665&c=9nVpGfmj1aZOQQ) your temperature is pretty high - try reducing the frequency to 325MHz and see if that helps
|
|
|
|
aarons6
Legendary
Offline
Activity: 1736
Merit: 1006
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
April 11, 2015, 08:20:47 PM |
|
one of my hashboard has failed once again, sent for RMA. this is the status for the other hashboard. is the HW error too high? ![](https://ip.bitcointalk.org/?u=http%3A%2F%2Fs9.postimg.org%2Fod5lesbzh%2FScreen_Shot_2015_04_12_at_3_39_33_am.png&t=665&c=9nVpGfmj1aZOQQ) the hwe does seem a little high for only 15 minutes.. but it might settle down after a few hours of running.. id check it over night. also that fan is spinning way too slow.. is it the stock fan?? should be 3500 rpms at that temp.. what power supply are you using?
|
|
|
|
scyth33
Member
![*](https://bitcointalk.org/Themes/custom1/images/star.gif)
Offline
Activity: 99
Merit: 10
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
April 11, 2015, 08:25:45 PM Last edit: April 11, 2015, 10:54:20 PM by scyth33 |
|
@klondike_bar: will test 325mhz later
@aarons6: i have 2 fans running, one is stock and the other is a noctua. my ambient temperature is quite high here. not possible to get the temp below 50c even if the fan is at its max. using a dell 2100w psu
fixed it. swapped the data cable
|
|
|
|
alh
Legendary
Offline
Activity: 1846
Merit: 1052
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
April 11, 2015, 08:29:14 PM |
|
There are voltage regulators that will accept 12V input, and deliver a variable voltage output, controlled by a potentiometer on the board. They will handle 10's of Watts, and cost $10-15 on Amazon or Ebay. For many people this will be way easier, and less expensive, that trying to build one.
|
|
|
|
aarons6
Legendary
Offline
Activity: 1736
Merit: 1006
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
April 11, 2015, 09:07:46 PM Last edit: April 12, 2015, 04:55:19 AM by aarons6 |
|
There are voltage regulators that will accept 12V input, and deliver a variable voltage output, controlled by a potentiometer on the board. They will handle 10's of Watts, and cost $10-15 on Amazon or Ebay. For many people this will be way easier, and less expensive, that trying to build one.
im not trying to build a voltage regulator. im trying to build a logic inverter to turn the pwm back around so the fan speeds up when it gets hot instead of slowing down. the circuit needs 5v to run, because that is what sets the pwm to full speed.. or my fans case, zero speed. i can just plug the fan into the 12v molex for power, the inverter into the 5v on the molex for power and then just use the sense and pwm wire connected to the s5. ok i redesigned my schematic.. tell me if this will work.. the blue wire doesnt connect to anything it goes straight to the fan. ![](https://ip.bitcointalk.org/?u=https%3A%2F%2Ffarm9.staticflickr.com%2F8780%2F16906606937_d422108e00_b.jpg&t=665&c=oEEcKc9xkNuxOQ) edit, for anyone that cares, or bought this fan like i did.. this works 100% and was easy to make.. for the transistor, i just used a 2222a NPN one the E is pointing UP, it goes to ground... 2 1k resistors and a 10k.
|
|
|
|
opentoe
Legendary
Offline
Activity: 1274
Merit: 1000
Personal text my ass....
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
April 12, 2015, 09:57:48 PM |
|
Sorry for my paint skills but i think i need to make this for my fan to work correctly.. any electrical engineers in here to check my work? ![](https://ip.bitcointalk.org/?u=https%3A%2F%2Ffarm9.staticflickr.com%2F8756%2F16899725427_66cf67fc0c_b.jpg&t=665&c=zY_8soV5yNgz_Q) not sure if that L7805 will get too hot.. also im not sure what the value of R2 should be.. or maybe it doesnt matter? the higher level of R2 the slower the fan will run, i think? the transistor is 2n2222 or something? NPN i think? What's wrong with the stock fan?
|
|
|
|
opentoe
Legendary
Offline
Activity: 1274
Merit: 1000
Personal text my ass....
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
April 12, 2015, 10:03:33 PM |
|
one of my hashboard has failed once again, sent for RMA. this is the status for the other hashboard. is the HW error too high? ![](https://ip.bitcointalk.org/?u=http%3A%2F%2Fs9.postimg.org%2Fod5lesbzh%2FScreen_Shot_2015_04_12_at_3_39_33_am.png&t=665&c=9nVpGfmj1aZOQQ) your temperature is pretty high - try reducing the frequency to 325MHz and see if that helps Are we looking at the same temp? 51c is just fine. I even read pages back in this thread 60c is ok to run. That's why 80c is the shutoff. Maybe I'm looking at the wrong thing?
|
|
|
|
aarons6
Legendary
Offline
Activity: 1736
Merit: 1006
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
April 12, 2015, 10:36:40 PM |
|
What's wrong with the stock fan?
nothing is wrong with the stock fan, i bought another fan like it to run in pull, but it ended up being pwm inverted.. i fixed it up tho and my temps are good.. and its alot quieter with 2 fans running at half the speed. ![](https://ip.bitcointalk.org/?u=https%3A%2F%2Ffarm9.staticflickr.com%2F8719%2F17101001046_0d71bdc54a_b.jpg&t=665&c=R6QYLYgfWKm2RA)
|
|
|
|
|