Bitcoin Forum
June 22, 2024, 02:49:35 AM *
News: Voting for pizza day contest
 
   Home   Help Search Login Register More  
Pages: « 1 ... 156 157 158 159 160 161 162 163 164 165 166 167 168 169 170 171 172 173 174 175 176 177 178 179 180 181 182 183 184 185 186 187 188 189 190 191 192 193 194 195 196 197 198 199 200 201 202 203 204 205 [206] 207 208 209 210 211 212 213 214 215 216 217 218 219 220 221 222 223 224 225 226 227 228 229 230 231 232 233 234 235 236 237 238 239 240 241 242 243 244 245 246 247 248 249 250 251 252 253 254 255 256 ... 295 »
  Print  
Author Topic: ANTMINER S5: 1155GH(+OverClock Potential), In Stock $0.319/GH & 0.51W/GH  (Read 450933 times)
Subw
Hero Member
*****
Offline Offline

Activity: 672
Merit: 500


View Profile
May 02, 2015, 06:39:40 PM
 #4101

Bitmain do you have a holiday this days?
Darthswan
Hero Member
*****
Offline Offline

Activity: 818
Merit: 508



View Profile
May 03, 2015, 01:25:11 AM
 #4102

Well I was a away from home today and my internet went down.  When I got back home it was up and running and the miners were acting funky.  I powered them down and they all came back up right, but the S5 didn't.  I noticed I am stuck around 500 to 600.  I'm going to go through the steps, but anything upfront would be greatly appreciated.  Miner was running fine up to that point of the internet going down.  The second chain is completely dead.  Thanks in advance.

            ▄▄████▄▄
        ▄▄██████████████▄▄
      ███████████████████████▄▄
      ▀▀█████████████████████████
██▄▄       ▀▀█████████████████████
██████▄▄        ▀█████████████████
███████████▄▄       ▀▀████████████
███████████████▄▄        ▀████████
████████████████████▄▄       ▀▀███
 ▀▀██████████████████████▄▄
     ▀▀██████████████████████▄▄
▄▄        ▀██████████████████████▄
████▄▄        ▀▀██████████████████
█████████▄▄        ▀▀█████████████
█████████████▄▄        ▀▀█████████
██████████████████▄▄        ▀▀████
▀██████████████████████▄▄
  ▀▀████████████████████████
      ▀▀█████████████████▀▀
           ▀▀███████▀▀



.SEMUX
█ █
█ █
█ █
█ █
█ █
█ █
█ █
█ █
█ █
█ █
█ █
█ █
█ █
█ █
█ █
█ █
█ █
█ █
█ █
█ █
█ █
█ █
█ █
█ █
█ █
█ █
█ █
█ █
  Semux uses .100% original codebase.
  Superfast with .30 seconds instant finality.
  Tested .5000 tx per block. on open network
█ █
█ █
█ █
█ █
█ █
█ █
█ █
█ █
█ █
█ █
█ █
█ █
█ █
█ █
notlist3d
Legendary
*
Offline Offline

Activity: 1456
Merit: 1000



View Profile
May 03, 2015, 01:29:19 AM
 #4103

Well I was a away from home today and my internet went down.  When I got back home it was up and running and the miners were acting funky.  I powered them down and they all came back up right, but the S5 didn't.  I noticed I am stuck around 500 to 600.  I'm going to go through the steps, but anything upfront would be greatly appreciated.  Miner was running fine up to that point of the internet going down.  The second chain is completely dead.  Thanks in advance.



Here is a guide for PCB: https://bitmain.zendesk.com/hc/en-us/articles/204875015-How-to-diagnose-S5-hashing-PCB

I would use that first to make sure it looks good hardware wise.  It is not bad to check it anyways.

And here is a guide if it does seem to stick around 500-600 area after: https://bitmain.zendesk.com/hc/en-us/articles/203559969-My-S5-hashes-at-about-600GH-S

Please let us all know if that works for you!  Best of luck.
Darthswan
Hero Member
*****
Offline Offline

Activity: 818
Merit: 508



View Profile
May 03, 2015, 01:43:02 AM
 #4104

Well I was a away from home today and my internet went down.  When I got back home it was up and running and the miners were acting funky.  I powered them down and they all came back up right, but the S5 didn't.  I noticed I am stuck around 500 to 600.  I'm going to go through the steps, but anything upfront would be greatly appreciated.  Miner was running fine up to that point of the internet going down.  The second chain is completely dead.  Thanks in advance.



Here is a guide for PCB: https://bitmain.zendesk.com/hc/en-us/articles/204875015-How-to-diagnose-S5-hashing-PCB

I would use that first to make sure it looks good hardware wise.  It is not bad to check it anyways.

And here is a guide if it does seem to stick around 500-600 area after: https://bitmain.zendesk.com/hc/en-us/articles/203559969-My-S5-hashes-at-about-600GH-S

Please let us all know if that works for you!  Best of luck.

Unscrewing the screws for the board, i notice a stripped screw head. 

            ▄▄████▄▄
        ▄▄██████████████▄▄
      ███████████████████████▄▄
      ▀▀█████████████████████████
██▄▄       ▀▀█████████████████████
██████▄▄        ▀█████████████████
███████████▄▄       ▀▀████████████
███████████████▄▄        ▀████████
████████████████████▄▄       ▀▀███
 ▀▀██████████████████████▄▄
     ▀▀██████████████████████▄▄
▄▄        ▀██████████████████████▄
████▄▄        ▀▀██████████████████
█████████▄▄        ▀▀█████████████
█████████████▄▄        ▀▀█████████
██████████████████▄▄        ▀▀████
▀██████████████████████▄▄
  ▀▀████████████████████████
      ▀▀█████████████████▀▀
           ▀▀███████▀▀



.SEMUX
█ █
█ █
█ █
█ █
█ █
█ █
█ █
█ █
█ █
█ █
█ █
█ █
█ █
█ █
█ █
█ █
█ █
█ █
█ █
█ █
█ █
█ █
█ █
█ █
█ █
█ █
█ █
█ █
  Semux uses .100% original codebase.
  Superfast with .30 seconds instant finality.
  Tested .5000 tx per block. on open network
█ █
█ █
█ █
█ █
█ █
█ █
█ █
█ █
█ █
█ █
█ █
█ █
█ █
█ █
notlist3d
Legendary
*
Offline Offline

Activity: 1456
Merit: 1000



View Profile
May 03, 2015, 01:49:07 AM
 #4105

Well I was a away from home today and my internet went down.  When I got back home it was up and running and the miners were acting funky.  I powered them down and they all came back up right, but the S5 didn't.  I noticed I am stuck around 500 to 600.  I'm going to go through the steps, but anything upfront would be greatly appreciated.  Miner was running fine up to that point of the internet going down.  The second chain is completely dead.  Thanks in advance.



Here is a guide for PCB: https://bitmain.zendesk.com/hc/en-us/articles/204875015-How-to-diagnose-S5-hashing-PCB

I would use that first to make sure it looks good hardware wise.  It is not bad to check it anyways.

And here is a guide if it does seem to stick around 500-600 area after: https://bitmain.zendesk.com/hc/en-us/articles/203559969-My-S5-hashes-at-about-600GH-S

Please let us all know if that works for you!  Best of luck.

Unscrewing the screws for the board, i notice a stripped screw head. 

Is it stripped to point you cant unscrew?  I don't want you to do any damage.   

If we cannot go through PCB guide I would go to other guide: https://bitmain.zendesk.com/hc/en-us/articles/203559969-My-S5-hashes-at-about-600GH-S

It is more software then hardware.  But it's worth trying it. 
Darthswan
Hero Member
*****
Offline Offline

Activity: 818
Merit: 508



View Profile
May 03, 2015, 02:33:22 AM
 #4106

Well I was a away from home today and my internet went down.  When I got back home it was up and running and the miners were acting funky.  I powered them down and they all came back up right, but the S5 didn't.  I noticed I am stuck around 500 to 600.  I'm going to go through the steps, but anything upfront would be greatly appreciated.  Miner was running fine up to that point of the internet going down.  The second chain is completely dead.  Thanks in advance.



Here is a guide for PCB: https://bitmain.zendesk.com/hc/en-us/articles/204875015-How-to-diagnose-S5-hashing-PCB

I would use that first to make sure it looks good hardware wise.  It is not bad to check it anyways.

And here is a guide if it does seem to stick around 500-600 area after: https://bitmain.zendesk.com/hc/en-us/articles/203559969-My-S5-hashes-at-about-600GH-S

Please let us all know if that works for you!  Best of luck.

Unscrewing the screws for the board, i notice a stripped screw head. 

Is it stripped to point you cant unscrew?  I don't want you to do any damage.   

If we cannot go through PCB guide I would go to other guide: https://bitmain.zendesk.com/hc/en-us/articles/203559969-My-S5-hashes-at-about-600GH-S

It is more software then hardware.  But it's worth trying it. 

It's a stripped screw and I don't want to damage it.  I was able to move the PCB and check both boards individually.  I have a dead board, and 1 chip dead on the other board.  It also isn't hashing.  This is not a good day.  10 miners and this is the first miner to do this.  ARGGGGGG.

What are the next steps?

            ▄▄████▄▄
        ▄▄██████████████▄▄
      ███████████████████████▄▄
      ▀▀█████████████████████████
██▄▄       ▀▀█████████████████████
██████▄▄        ▀█████████████████
███████████▄▄       ▀▀████████████
███████████████▄▄        ▀████████
████████████████████▄▄       ▀▀███
 ▀▀██████████████████████▄▄
     ▀▀██████████████████████▄▄
▄▄        ▀██████████████████████▄
████▄▄        ▀▀██████████████████
█████████▄▄        ▀▀█████████████
█████████████▄▄        ▀▀█████████
██████████████████▄▄        ▀▀████
▀██████████████████████▄▄
  ▀▀████████████████████████
      ▀▀█████████████████▀▀
           ▀▀███████▀▀



.SEMUX
█ █
█ █
█ █
█ █
█ █
█ █
█ █
█ █
█ █
█ █
█ █
█ █
█ █
█ █
█ █
█ █
█ █
█ █
█ █
█ █
█ █
█ █
█ █
█ █
█ █
█ █
█ █
█ █
  Semux uses .100% original codebase.
  Superfast with .30 seconds instant finality.
  Tested .5000 tx per block. on open network
█ █
█ █
█ █
█ █
█ █
█ █
█ █
█ █
█ █
█ █
█ █
█ █
█ █
█ █
notlist3d
Legendary
*
Offline Offline

Activity: 1456
Merit: 1000



View Profile
May 03, 2015, 02:52:21 AM
 #4107

Well I was a away from home today and my internet went down.  When I got back home it was up and running and the miners were acting funky.  I powered them down and they all came back up right, but the S5 didn't.  I noticed I am stuck around 500 to 600.  I'm going to go through the steps, but anything upfront would be greatly appreciated.  Miner was running fine up to that point of the internet going down.  The second chain is completely dead.  Thanks in advance.



Here is a guide for PCB: https://bitmain.zendesk.com/hc/en-us/articles/204875015-How-to-diagnose-S5-hashing-PCB

I would use that first to make sure it looks good hardware wise.  It is not bad to check it anyways.

And here is a guide if it does seem to stick around 500-600 area after: https://bitmain.zendesk.com/hc/en-us/articles/203559969-My-S5-hashes-at-about-600GH-S

Please let us all know if that works for you!  Best of luck.

Unscrewing the screws for the board, i notice a stripped screw head. 

Is it stripped to point you cant unscrew?  I don't want you to do any damage.   

If we cannot go through PCB guide I would go to other guide: https://bitmain.zendesk.com/hc/en-us/articles/203559969-My-S5-hashes-at-about-600GH-S

It is more software then hardware.  But it's worth trying it. 

It's a stripped screw and I don't want to damage it.  I was able to move the PCB and check both boards individually.  I have a dead board, and 1 chip dead on the other board.  It also isn't hashing.  This is not a good day.  10 miners and this is the first miner to do this.  ARGGGGGG.

What are the next steps?

Do you know if it's still in warranty? Did you buy direct from Bitmain?

Next step you will need to contact Bitmain Warranty.  They will have to help as far as parts.   Below is the ways to contact them:

There is webpage:
https://bitmain.zendesk.com/hc/en-us

Skype:
BitmainEnglish

And email:
support@bitmain.zendesk.com
Darthswan
Hero Member
*****
Offline Offline

Activity: 818
Merit: 508



View Profile
May 03, 2015, 03:04:54 AM
 #4108

Well I was a away from home today and my internet went down.  When I got back home it was up and running and the miners were acting funky.  I powered them down and they all came back up right, but the S5 didn't.  I noticed I am stuck around 500 to 600.  I'm going to go through the steps, but anything upfront would be greatly appreciated.  Miner was running fine up to that point of the internet going down.  The second chain is completely dead.  Thanks in advance.



Here is a guide for PCB: https://bitmain.zendesk.com/hc/en-us/articles/204875015-How-to-diagnose-S5-hashing-PCB

I would use that first to make sure it looks good hardware wise.  It is not bad to check it anyways.

And here is a guide if it does seem to stick around 500-600 area after: https://bitmain.zendesk.com/hc/en-us/articles/203559969-My-S5-hashes-at-about-600GH-S

Please let us all know if that works for you!  Best of luck.

Unscrewing the screws for the board, i notice a stripped screw head. 

Is it stripped to point you cant unscrew?  I don't want you to do any damage.   

If we cannot go through PCB guide I would go to other guide: https://bitmain.zendesk.com/hc/en-us/articles/203559969-My-S5-hashes-at-about-600GH-S

It is more software then hardware.  But it's worth trying it. 

It's a stripped screw and I don't want to damage it.  I was able to move the PCB and check both boards individually.  I have a dead board, and 1 chip dead on the other board.  It also isn't hashing.  This is not a good day.  10 miners and this is the first miner to do this.  ARGGGGGG.

What are the next steps?

Do you know if it's still in warranty? Did you buy direct from Bitmain?

Next step you will need to contact Bitmain Warranty.  They will have to help as far as parts.   Below is the ways to contact them:

There is webpage:
https://bitmain.zendesk.com/hc/en-us

Skype:
BitmainEnglish

And email:
support@bitmain.zendesk.com

Just over a month old.  Straight Bitmain.  I'll go to the site now.

            ▄▄████▄▄
        ▄▄██████████████▄▄
      ███████████████████████▄▄
      ▀▀█████████████████████████
██▄▄       ▀▀█████████████████████
██████▄▄        ▀█████████████████
███████████▄▄       ▀▀████████████
███████████████▄▄        ▀████████
████████████████████▄▄       ▀▀███
 ▀▀██████████████████████▄▄
     ▀▀██████████████████████▄▄
▄▄        ▀██████████████████████▄
████▄▄        ▀▀██████████████████
█████████▄▄        ▀▀█████████████
█████████████▄▄        ▀▀█████████
██████████████████▄▄        ▀▀████
▀██████████████████████▄▄
  ▀▀████████████████████████
      ▀▀█████████████████▀▀
           ▀▀███████▀▀



.SEMUX
█ █
█ █
█ █
█ █
█ █
█ █
█ █
█ █
█ █
█ █
█ █
█ █
█ █
█ █
█ █
█ █
█ █
█ █
█ █
█ █
█ █
█ █
█ █
█ █
█ █
█ █
█ █
█ █
  Semux uses .100% original codebase.
  Superfast with .30 seconds instant finality.
  Tested .5000 tx per block. on open network
█ █
█ █
█ █
█ █
█ █
█ █
█ █
█ █
█ █
█ █
█ █
█ █
█ █
█ █
notlist3d
Legendary
*
Offline Offline

Activity: 1456
Merit: 1000



View Profile
May 03, 2015, 03:23:12 AM
 #4109

Well I was a away from home today and my internet went down.  When I got back home it was up and running and the miners were acting funky.  I powered them down and they all came back up right, but the S5 didn't.  I noticed I am stuck around 500 to 600.  I'm going to go through the steps, but anything upfront would be greatly appreciated.  Miner was running fine up to that point of the internet going down.  The second chain is completely dead.  Thanks in advance.



Here is a guide for PCB: https://bitmain.zendesk.com/hc/en-us/articles/204875015-How-to-diagnose-S5-hashing-PCB

I would use that first to make sure it looks good hardware wise.  It is not bad to check it anyways.

And here is a guide if it does seem to stick around 500-600 area after: https://bitmain.zendesk.com/hc/en-us/articles/203559969-My-S5-hashes-at-about-600GH-S

Please let us all know if that works for you!  Best of luck.

Unscrewing the screws for the board, i notice a stripped screw head. 

Is it stripped to point you cant unscrew?  I don't want you to do any damage.   

If we cannot go through PCB guide I would go to other guide: https://bitmain.zendesk.com/hc/en-us/articles/203559969-My-S5-hashes-at-about-600GH-S

It is more software then hardware.  But it's worth trying it. 

It's a stripped screw and I don't want to damage it.  I was able to move the PCB and check both boards individually.  I have a dead board, and 1 chip dead on the other board.  It also isn't hashing.  This is not a good day.  10 miners and this is the first miner to do this.  ARGGGGGG.

What are the next steps?

Do you know if it's still in warranty? Did you buy direct from Bitmain?

Next step you will need to contact Bitmain Warranty.  They will have to help as far as parts.   Below is the ways to contact them:

There is webpage:
https://bitmain.zendesk.com/hc/en-us

Skype:
BitmainEnglish

And email:
support@bitmain.zendesk.com

Just over a month old.  Straight Bitmain.  I'll go to the site now.

Thats good news mean still in warranty. They have some great support I'm sure will take care of you.
Darthswan
Hero Member
*****
Offline Offline

Activity: 818
Merit: 508



View Profile
May 03, 2015, 03:29:12 AM
 #4110

Well I was a away from home today and my internet went down.  When I got back home it was up and running and the miners were acting funky.  I powered them down and they all came back up right, but the S5 didn't.  I noticed I am stuck around 500 to 600.  I'm going to go through the steps, but anything upfront would be greatly appreciated.  Miner was running fine up to that point of the internet going down.  The second chain is completely dead.  Thanks in advance.



Here is a guide for PCB: https://bitmain.zendesk.com/hc/en-us/articles/204875015-How-to-diagnose-S5-hashing-PCB

I would use that first to make sure it looks good hardware wise.  It is not bad to check it anyways.

And here is a guide if it does seem to stick around 500-600 area after: https://bitmain.zendesk.com/hc/en-us/articles/203559969-My-S5-hashes-at-about-600GH-S

Please let us all know if that works for you!  Best of luck.

Unscrewing the screws for the board, i notice a stripped screw head. 

Is it stripped to point you cant unscrew?  I don't want you to do any damage.   

If we cannot go through PCB guide I would go to other guide: https://bitmain.zendesk.com/hc/en-us/articles/203559969-My-S5-hashes-at-about-600GH-S

It is more software then hardware.  But it's worth trying it. 

It's a stripped screw and I don't want to damage it.  I was able to move the PCB and check both boards individually.  I have a dead board, and 1 chip dead on the other board.  It also isn't hashing.  This is not a good day.  10 miners and this is the first miner to do this.  ARGGGGGG.

What are the next steps?

Do you know if it's still in warranty? Did you buy direct from Bitmain?

Next step you will need to contact Bitmain Warranty.  They will have to help as far as parts.   Below is the ways to contact them:

There is webpage:
https://bitmain.zendesk.com/hc/en-us

Skype:
BitmainEnglish

And email:
support@bitmain.zendesk.com

Just over a month old.  Straight Bitmain.  I'll go to the site now.

Thats good news mean still in warranty. They have some great support I'm sure will take care of you.

I shot them an email.  Which is better, phone or email?

            ▄▄████▄▄
        ▄▄██████████████▄▄
      ███████████████████████▄▄
      ▀▀█████████████████████████
██▄▄       ▀▀█████████████████████
██████▄▄        ▀█████████████████
███████████▄▄       ▀▀████████████
███████████████▄▄        ▀████████
████████████████████▄▄       ▀▀███
 ▀▀██████████████████████▄▄
     ▀▀██████████████████████▄▄
▄▄        ▀██████████████████████▄
████▄▄        ▀▀██████████████████
█████████▄▄        ▀▀█████████████
█████████████▄▄        ▀▀█████████
██████████████████▄▄        ▀▀████
▀██████████████████████▄▄
  ▀▀████████████████████████
      ▀▀█████████████████▀▀
           ▀▀███████▀▀



.SEMUX
█ █
█ █
█ █
█ █
█ █
█ █
█ █
█ █
█ █
█ █
█ █
█ █
█ █
█ █
█ █
█ █
█ █
█ █
█ █
█ █
█ █
█ █
█ █
█ █
█ █
█ █
█ █
█ █
  Semux uses .100% original codebase.
  Superfast with .30 seconds instant finality.
  Tested .5000 tx per block. on open network
█ █
█ █
█ █
█ █
█ █
█ █
█ █
█ █
█ █
█ █
█ █
█ █
█ █
█ █
notlist3d
Legendary
*
Offline Offline

Activity: 1456
Merit: 1000



View Profile
May 03, 2015, 03:50:13 AM
 #4111

Well I was a away from home today and my internet went down.  When I got back home it was up and running and the miners were acting funky.  I powered them down and they all came back up right, but the S5 didn't.  I noticed I am stuck around 500 to 600.  I'm going to go through the steps, but anything upfront would be greatly appreciated.  Miner was running fine up to that point of the internet going down.  The second chain is completely dead.  Thanks in advance.



Here is a guide for PCB: https://bitmain.zendesk.com/hc/en-us/articles/204875015-How-to-diagnose-S5-hashing-PCB

I would use that first to make sure it looks good hardware wise.  It is not bad to check it anyways.

And here is a guide if it does seem to stick around 500-600 area after: https://bitmain.zendesk.com/hc/en-us/articles/203559969-My-S5-hashes-at-about-600GH-S

Please let us all know if that works for you!  Best of luck.

Unscrewing the screws for the board, i notice a stripped screw head. 

Is it stripped to point you cant unscrew?  I don't want you to do any damage.   

If we cannot go through PCB guide I would go to other guide: https://bitmain.zendesk.com/hc/en-us/articles/203559969-My-S5-hashes-at-about-600GH-S

It is more software then hardware.  But it's worth trying it. 

It's a stripped screw and I don't want to damage it.  I was able to move the PCB and check both boards individually.  I have a dead board, and 1 chip dead on the other board.  It also isn't hashing.  This is not a good day.  10 miners and this is the first miner to do this.  ARGGGGGG.

What are the next steps?

Do you know if it's still in warranty? Did you buy direct from Bitmain?

Next step you will need to contact Bitmain Warranty.  They will have to help as far as parts.   Below is the ways to contact them:

There is webpage:
https://bitmain.zendesk.com/hc/en-us

Skype:
BitmainEnglish

And email:
support@bitmain.zendesk.com

Just over a month old.  Straight Bitmain.  I'll go to the site now.

Thats good news mean still in warranty. They have some great support I'm sure will take care of you.

I shot them an email.  Which is better, phone or email?

Personally I would shoot them a email.  I'm sure they will get back to you as soon as they can.  So you are good. 
MyRig
Donator
Hero Member
*
Offline Offline

Activity: 792
Merit: 510


support@myrig.com


View Profile WWW
May 03, 2015, 04:24:04 AM
 #4112

@Darthswan

send us email to support@bitmain.zendesk.com 

Please attach PDF of your Bitmaintech.com order confirmation page and descrition of what is wrong with your unit.

If you have done the self diagnostic, the result would help our techs to expedite the process a bit.


Antminer & DragonMint Repair  E-mail: support@myrig.com   T: @MyRig_com
Return Address: MyRig 3700 Quebec Street, Unit 100-239, Denver, Colorado 80207, USA
Darthswan
Hero Member
*****
Offline Offline

Activity: 818
Merit: 508



View Profile
May 03, 2015, 12:11:51 PM
 #4113

@Darthswan

send us email to support@bitmain.zendesk.com 

Please attach PDF of your Bitmaintech.com order confirmation page and descrition of what is wrong with your unit.

If you have done the self diagnostic, the result would help our techs to expedite the process a bit.



I attached the order id number, when I get back this morning I will look for a pdf version of it. 

            ▄▄████▄▄
        ▄▄██████████████▄▄
      ███████████████████████▄▄
      ▀▀█████████████████████████
██▄▄       ▀▀█████████████████████
██████▄▄        ▀█████████████████
███████████▄▄       ▀▀████████████
███████████████▄▄        ▀████████
████████████████████▄▄       ▀▀███
 ▀▀██████████████████████▄▄
     ▀▀██████████████████████▄▄
▄▄        ▀██████████████████████▄
████▄▄        ▀▀██████████████████
█████████▄▄        ▀▀█████████████
█████████████▄▄        ▀▀█████████
██████████████████▄▄        ▀▀████
▀██████████████████████▄▄
  ▀▀████████████████████████
      ▀▀█████████████████▀▀
           ▀▀███████▀▀



.SEMUX
█ █
█ █
█ █
█ █
█ █
█ █
█ █
█ █
█ █
█ █
█ █
█ █
█ █
█ █
█ █
█ █
█ █
█ █
█ █
█ █
█ █
█ █
█ █
█ █
█ █
█ █
█ █
█ █
  Semux uses .100% original codebase.
  Superfast with .30 seconds instant finality.
  Tested .5000 tx per block. on open network
█ █
█ █
█ █
█ █
█ █
█ █
█ █
█ █
█ █
█ █
█ █
█ █
█ █
█ █
scyth33
Member
**
Offline Offline

Activity: 99
Merit: 10


View Profile
May 03, 2015, 01:22:15 PM
 #4114

is it possible have 4 blades connected to 1 controller?
Tupsu
Legendary
*
Offline Offline

Activity: 1218
Merit: 1003



View Profile
May 03, 2015, 01:32:11 PM
 #4115

is it possible have 4 blades connected to 1 controller?

Yes. But it is not supported by  the very first and last software.
scyth33
Member
**
Offline Offline

Activity: 99
Merit: 10


View Profile
May 03, 2015, 01:36:16 PM
 #4116

mmm. there's only 2 version released. do you know which software version?


is it possible have 4 blades connected to 1 controller?

Yes. But it is not supported by  the very first and last software.
Tupsu
Legendary
*
Offline Offline

Activity: 1218
Merit: 1003



View Profile
May 03, 2015, 01:46:22 PM
Last edit: May 03, 2015, 04:29:16 PM by Tupsu
 #4117

mmm. there's only 2 version released. do you know which software version?


Mine works with this version.
You can download it here

www.perearstike.ee/S5/SD-S5-20150415.tar.gz
scyth33
Member
**
Offline Offline

Activity: 99
Merit: 10


View Profile
May 03, 2015, 01:51:48 PM
 #4118

mmm. there's only 2 version released. do you know which software version?


Mine works with this version.
You can download it here
www.perearstike.ee/S5/SD-S5-20150415.tar.gz



thanks.. is it a modified firmware?
Tupsu
Legendary
*
Offline Offline

Activity: 1218
Merit: 1003



View Profile
May 03, 2015, 02:26:29 PM
 #4119


thanks.. is it a modified firmware?

No.
scyth33
Member
**
Offline Offline

Activity: 99
Merit: 10


View Profile
May 03, 2015, 02:34:41 PM
 #4120

mine does not pass 1.3th/s. testing with 3 blades now
Pages: « 1 ... 156 157 158 159 160 161 162 163 164 165 166 167 168 169 170 171 172 173 174 175 176 177 178 179 180 181 182 183 184 185 186 187 188 189 190 191 192 193 194 195 196 197 198 199 200 201 202 203 204 205 [206] 207 208 209 210 211 212 213 214 215 216 217 218 219 220 221 222 223 224 225 226 227 228 229 230 231 232 233 234 235 236 237 238 239 240 241 242 243 244 245 246 247 248 249 250 251 252 253 254 255 256 ... 295 »
  Print  
 
Jump to:  

Powered by MySQL Powered by PHP Powered by SMF 1.1.19 | SMF © 2006-2009, Simple Machines Valid XHTML 1.0! Valid CSS!