notlist3d
Legendary
Offline
Activity: 1456
Merit: 1000
|
|
May 07, 2015, 09:36:08 AM |
|
I was lucky, I got 4 fan Delta ;DTFC1212DE-SP07 for $ 36 including shipping
That is a bargain. Price is what sent me to the Sanyo. But at less then 10 each that is a deal on delta's.
|
|
|
|
aarons6
Legendary
Offline
Activity: 1736
Merit: 1006
|
|
May 07, 2015, 09:37:05 AM |
|
I was lucky, I got 4 fan Delta ;DTFC1212DE-SP07 for $ 36 including shipping
thats the fan i got to pair up to the stock fan, it flows alot of air. the fan i got tho was reversed pwm, so i had to make an adapter.
|
|
|
|
GigaBit
|
|
May 07, 2015, 09:36:49 PM |
|
I was lucky, I got 4 fan Delta ;DTFC1212DE-SP07 for $ 36 including shipping
thats the fan i got to pair up to the stock fan, it flows alot of air. the fan i got tho was reversed pwm, so i had to make an adapter. Sure you get long enough wires??.... the ones on S5's connect to the PCB instead of the HashBoards. Lot greater travel distance for the wire to connect. Back then the S1 & S3 fans were interchangeable, the S5 killed that. The difference is about 2 inches in wire length. You may need to get your hands dirty or buy the fans directly from Bitmain. Soldering's no big deal but was kind of stupid to omit the hashboard fan connectors. Just hope they are long enough, then I'll know what to hunt. Those 4,000 CFM fans ain't cheap, let alone with enough rope...
|
..Stake.com.. | | | ▄████████████████████████████████████▄ ██ ▄▄▄▄▄▄▄▄▄▄ ▄▄▄▄▄▄▄▄▄▄ ██ ▄████▄ ██ ▀▀▀▀▀▀▀▀▀▀ ██████████ ▀▀▀▀▀▀▀▀▀▀ ██ ██████ ██ ██████████ ██ ██ ██████████ ██ ▀██▀ ██ ██ ██ ██████ ██ ██ ██ ██ ██ ██ ██████ ██ █████ ███ ██████ ██ ████▄ ██ ██ █████ ███ ████ ████ █████ ███ ████████ ██ ████ ████ ██████████ ████ ████ ████▀ ██ ██████████ ▄▄▄▄▄▄▄▄▄▄ ██████████ ██ ██ ▀▀▀▀▀▀▀▀▀▀ ██ ▀█████████▀ ▄████████████▄ ▀█████████▀ ▄▄▄▄▄▄▄▄▄▄▄▄███ ██ ██ ███▄▄▄▄▄▄▄▄▄▄▄▄ ██████████████████████████████████████████ | | | | | | ▄▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▄ █ ▄▀▄ █▀▀█▀▄▄ █ █▀█ █ ▐ ▐▌ █ ▄██▄ █ ▌ █ █ ▄██████▄ █ ▌ ▐▌ █ ██████████ █ ▐ █ █ ▐██████████▌ █ ▐ ▐▌ █ ▀▀██████▀▀ █ ▌ █ █ ▄▄▄██▄▄▄ █ ▌▐▌ █ █▐ █ █ █▐▐▌ █ █▐█ ▀▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▀█ | | | | | | ▄▄█████████▄▄ ▄██▀▀▀▀█████▀▀▀▀██▄ ▄█▀ ▐█▌ ▀█▄ ██ ▐█▌ ██ ████▄ ▄█████▄ ▄████ ████████▄███████████▄████████ ███▀ █████████████ ▀███ ██ ███████████ ██ ▀█▄ █████████ ▄█▀ ▀█▄ ▄██▀▀▀▀▀▀▀██▄ ▄▄▄█▀ ▀███████ ███████▀ ▀█████▄ ▄█████▀ ▀▀▀███▄▄▄███▀▀▀ | | | ..PLAY NOW.. |
|
|
|
aarons6
Legendary
Offline
Activity: 1736
Merit: 1006
|
|
May 07, 2015, 09:50:03 PM |
|
I was lucky, I got 4 fan Delta ;DTFC1212DE-SP07 for $ 36 including shipping
thats the fan i got to pair up to the stock fan, it flows alot of air. the fan i got tho was reversed pwm, so i had to make an adapter. Sure you get long enough wires??.... the ones on S5's connect to the PCB instead of the HashBoards. Lot greater travel distance for the wire to connect. Back then the S1 & S3 fans were interchangeable, the S5 killed that. The difference is about 2 inches in wire length. You may need to get your hands dirty or buy the fans directly from Bitmain. Soldering's no big deal but was kind of stupid to omit the hashboard fan connectors. Just hope they are long enough, then I'll know what to hunt. Those 4,000 CFM fans ain't cheap, let alone with enough rope... the wires were perfect length.. the fan i got use a reverse pwm signal. so instead of 0v full speed, and 5v stop, its 0v stop and 5v full speed.. im not sure if the fans he got are the same. this was the fan i got http://www.amazon.com/gp/product/B00L5XEKOS/ref=oh_aui_detailpage_o01_s00?ie=UTF8&psc=1
|
|
|
|
thedreamer
Legendary
Offline
Activity: 1694
Merit: 1002
Go Big or Go Home.....
|
|
May 08, 2015, 02:12:14 AM |
|
I ordered four of these fans, what do you think?
delta 120 mm 12 cm ventola pwm tfc1212de 252CFM
fabbricazione / marca delta modello / part number TFC1212DE-SP07 dimensione / dimension 120 mm x 120 mm x 38 mm tensione nominale 12 vdc corrente nominale 4.0 amp potenza nominale di ingresso - watt velocità della ventola 5500 numero di giri ( giri al minuto ) massimo flusso d'aria 252.8 cfm ( piedi cubi al minuto ) livello di rumore 66 db-a pressione massima 35.88 mmh2o tipo di cuscinetto palla terminazione 12 ? con 4 conduttori connettore di alimentazione 4 pin funzione / caratteristiche controllo pwm / sensore di velocità ( put tach out ) rohs rohs compliant
I have one. it's actually louder than the stock S5 fan.
|
Go Big or Go Home.
|
|
|
aarons6
Legendary
Offline
Activity: 1736
Merit: 1006
|
|
May 08, 2015, 03:15:58 AM |
|
I ordered four of these fans, what do you think?
delta 120 mm 12 cm ventola pwm tfc1212de 252CFM
fabbricazione / marca delta modello / part number TFC1212DE-SP07 dimensione / dimension 120 mm x 120 mm x 38 mm tensione nominale 12 vdc corrente nominale 4.0 amp potenza nominale di ingresso - watt velocità della ventola 5500 numero di giri ( giri al minuto ) massimo flusso d'aria 252.8 cfm ( piedi cubi al minuto ) livello di rumore 66 db-a pressione massima 35.88 mmh2o tipo di cuscinetto palla terminazione 12 ? con 4 conduttori connettore di alimentazione 4 pin funzione / caratteristiche controllo pwm / sensore di velocità ( put tach out ) rohs rohs compliant
I have one. it's actually louder than the stock S5 fan. it is at full volume but not at 50% and at 50% it flows more air then the stock fan.
|
|
|
|
toptekk
Member
Offline
Activity: 112
Merit: 10
|
|
May 08, 2015, 04:30:07 AM |
|
I was lucky, I got 4 fan Delta ;DTFC1212DE-SP07 for $ 36 including shipping
thats the fan i got to pair up to the stock fan, it flows alot of air. the fan i got tho was reversed pwm, so i had to make an adapter. Sure you get long enough wires??.... the ones on S5's connect to the PCB instead of the HashBoards. Lot greater travel distance for the wire to connect. Back then the S1 & S3 fans were interchangeable, the S5 killed that. The difference is about 2 inches in wire length. You may need to get your hands dirty or buy the fans directly from Bitmain. Soldering's no big deal but was kind of stupid to omit the hashboard fan connectors. Just hope they are long enough, then I'll know what to hunt. Those 4,000 CFM fans ain't cheap, let alone with enough rope... OR http://www.amazon.com/gp/product/B0055OLY88/ref=oh_aui_detailpage_o09_s00?ie=UTF8&psc=1
|
|
|
|
alienesb
|
|
May 08, 2015, 11:07:51 AM |
|
I was lucky, I got 4 fan Delta ;DTFC1212DE-SP07 for $ 36 including shipping
thats the fan i got to pair up to the stock fan, it flows alot of air. the fan i got tho was reversed pwm, so i had to make an adapter. Sure you get long enough wires??.... the ones on S5's connect to the PCB instead of the HashBoards. Lot greater travel distance for the wire to connect. Back then the S1 & S3 fans were interchangeable, the S5 killed that. The difference is about 2 inches in wire length. You may need to get your hands dirty or buy the fans directly from Bitmain. Soldering's no big deal but was kind of stupid to omit the hashboard fan connectors. Just hope they are long enough, then I'll know what to hunt. Those 4,000 CFM fans ain't cheap, let alone with enough rope... OR http://www.amazon.com/gp/product/B0055OLY88/ref=oh_aui_detailpage_o09_s00?ie=UTF8&psc=1Use the stock fan and just put this on it: http://www.amazon.com/Zalman-Fan-Speed-Controller-FANMATE-2/dp/B000292DO0/ref=sr_1_2?s=electronics&ie=UTF8&qid=1431083011&sr=1-2&keywords=fanmateI have used this for several miners and it lets you adjust the speed/sound/temp ratio just fine. Also, tape two of these in a line and put it on top of your miner to quiet it down even further. Make sure it extends past the fans a little bit: http://www.amazon.com/gp/product/B008Y387B4/ref=oh_aui_search_detailpage?ie=UTF8&psc=1
|
|
|
|
GigaBit
|
|
May 08, 2015, 06:05:39 PM |
|
I was lucky, I got 4 fan Delta ;DTFC1212DE-SP07 for $ 36 including shipping
thats the fan i got to pair up to the stock fan, it flows alot of air. the fan i got tho was reversed pwm, so i had to make an adapter. Sure you get long enough wires??.... the ones on S5's connect to the PCB instead of the HashBoards. Lot greater travel distance for the wire to connect. Back then the S1 & S3 fans were interchangeable, the S5 killed that. The difference is about 2 inches in wire length. You may need to get your hands dirty or buy the fans directly from Bitmain. Soldering's no big deal but was kind of stupid to omit the hashboard fan connectors. Just hope they are long enough, then I'll know what to hunt. Those 4,000 CFM fans ain't cheap, let alone with enough rope... the wires were perfect length.. the fan i got use a reverse pwm signal. so instead of 0v full speed, and 5v stop, its 0v stop and 5v full speed.. im not sure if the fans he got are the same. this was the fan i got http://www.amazon.com/gp/product/B00L5XEKOS/ref=oh_aui_detailpage_o01_s00?ie=UTF8&psc=1Awesome! I do have 2 boards to adapt those fans, clusters of 3, I got two because I intended on getting more C1's and upgrade fans/rad. Day I went to order C1... Sold Out! lol So I overspent for an S5 but that's fine, better one of those than 5x S1's. I was lucky, I got 4 fan Delta ;DTFC1212DE-SP07 for $ 36 including shipping
thats the fan i got to pair up to the stock fan, it flows alot of air. the fan i got tho was reversed pwm, so i had to make an adapter. Sure you get long enough wires??.... the ones on S5's connect to the PCB instead of the HashBoards. Lot greater travel distance for the wire to connect. Back then the S1 & S3 fans were interchangeable, the S5 killed that. The difference is about 2 inches in wire length. You may need to get your hands dirty or buy the fans directly from Bitmain. Soldering's no big deal but was kind of stupid to omit the hashboard fan connectors. Just hope they are long enough, then I'll know what to hunt. Those 4,000 CFM fans ain't cheap, let alone with enough rope... OR http://www.amazon.com/gp/product/B0055OLY88/ref=oh_aui_detailpage_o09_s00?ie=UTF8&psc=1That's brilliant!! Been looking for this for ages.... well... in bitcoin mining this means a few weeks. Yet again, amazon ain't normally my place to buy computer parts. Thanks, both of ya's, now I have a plan of attack but it's still kinda cool right now, hottest temperature in the mine is only 35c... Besides, I'll be putting in an air blower next month but adding a second fan should increase resale value... plus in case the blower fails. I'm more worried about temperature than I am with the noise. My Miner's white noise help me sleep at night.
|
..Stake.com.. | | | ▄████████████████████████████████████▄ ██ ▄▄▄▄▄▄▄▄▄▄ ▄▄▄▄▄▄▄▄▄▄ ██ ▄████▄ ██ ▀▀▀▀▀▀▀▀▀▀ ██████████ ▀▀▀▀▀▀▀▀▀▀ ██ ██████ ██ ██████████ ██ ██ ██████████ ██ ▀██▀ ██ ██ ██ ██████ ██ ██ ██ ██ ██ ██ ██████ ██ █████ ███ ██████ ██ ████▄ ██ ██ █████ ███ ████ ████ █████ ███ ████████ ██ ████ ████ ██████████ ████ ████ ████▀ ██ ██████████ ▄▄▄▄▄▄▄▄▄▄ ██████████ ██ ██ ▀▀▀▀▀▀▀▀▀▀ ██ ▀█████████▀ ▄████████████▄ ▀█████████▀ ▄▄▄▄▄▄▄▄▄▄▄▄███ ██ ██ ███▄▄▄▄▄▄▄▄▄▄▄▄ ██████████████████████████████████████████ | | | | | | ▄▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▄ █ ▄▀▄ █▀▀█▀▄▄ █ █▀█ █ ▐ ▐▌ █ ▄██▄ █ ▌ █ █ ▄██████▄ █ ▌ ▐▌ █ ██████████ █ ▐ █ █ ▐██████████▌ █ ▐ ▐▌ █ ▀▀██████▀▀ █ ▌ █ █ ▄▄▄██▄▄▄ █ ▌▐▌ █ █▐ █ █ █▐▐▌ █ █▐█ ▀▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▀█ | | | | | | ▄▄█████████▄▄ ▄██▀▀▀▀█████▀▀▀▀██▄ ▄█▀ ▐█▌ ▀█▄ ██ ▐█▌ ██ ████▄ ▄█████▄ ▄████ ████████▄███████████▄████████ ███▀ █████████████ ▀███ ██ ███████████ ██ ▀█▄ █████████ ▄█▀ ▀█▄ ▄██▀▀▀▀▀▀▀██▄ ▄▄▄█▀ ▀███████ ███████▀ ▀█████▄ ▄█████▀ ▀▀▀███▄▄▄███▀▀▀ | | | ..PLAY NOW.. |
|
|
|
tvasbn
|
|
May 09, 2015, 11:19:56 AM |
|
What exactly the deal whit batch 6, its only for bulk buyers?
|
|
|
|
FlensGold
Legendary
Offline
Activity: 1405
Merit: 1001
|
|
May 09, 2015, 11:31:55 AM |
|
Any idea when S5 will be available again? Will there be another batch?
|
|
|
|
notlist3d
Legendary
Offline
Activity: 1456
Merit: 1000
|
|
May 09, 2015, 11:33:34 AM |
|
What exactly the deal whit batch 6, its only for bulk buyers?
It was partially for "3rd generation chip BM1384. Due to International Labor Day, no shipping will be arranged from April 30th till May 3rd. April 28 is the last shipping date for bulk buy orders and April 29 is the last shipping date for small orders...." So I guess we see next if they have something up their sleeve or of they will do another batch. It could just be they are filling bulk orders from the holiday and catching up.
|
|
|
|
Rabinovitch
Legendary
Offline
Activity: 2030
Merit: 1076
A humble Siberian miner
|
|
May 09, 2015, 11:52:54 AM |
|
Any idea when S5 will be available again? Will there be another batch?
Probably only Bitmain can say.
|
|
|
|
Darthswan
|
|
May 09, 2015, 03:43:02 PM |
|
get tap and die kit . those kits remove screws but like some one said it destroys the screw and you may need to re tap the hole to a bigger screw depends on how care full you are when you remove it and how bad it was striped in the hole .At least that was what it was called a long a time ago it may have another name now . i haven't used a kit in a few years .
Finally got it loose.
|
|
|
|
tutorialevideo
Legendary
Offline
Activity: 1161
Merit: 1001
Don`t invest more than you can afford to lose
|
|
May 09, 2015, 04:10:21 PM |
|
antminer s5 batch 5 is on again! you can buy new miners
|
|
|
|
notlist3d
Legendary
Offline
Activity: 1456
Merit: 1000
|
|
May 09, 2015, 06:20:23 PM |
|
antminer s5 batch 5 is on again! you can buy new miners I would say it was just catching up from International Labor Day. Now they are back and ready to sell.
|
|
|
|
Xian01
Legendary
Offline
Activity: 1652
Merit: 1067
Christian Antkow
|
|
May 09, 2015, 07:59:32 PM |
|
antminer s5 batch 5 is on again! you can buy "new" miners FTFY.
|
|
|
|
tutorialevideo
Legendary
Offline
Activity: 1161
Merit: 1001
Don`t invest more than you can afford to lose
|
|
May 10, 2015, 05:07:09 AM |
|
antminer s5 batch 5 is on again! you can buy "new" miners FTFY. Sorry for my english
|
|
|
|
tutorialevideo
Legendary
Offline
Activity: 1161
Merit: 1001
Don`t invest more than you can afford to lose
|
|
May 11, 2015, 08:28:27 PM |
|
BATCH 5 SOLD OUT again
|
|
|
|
notlist3d
Legendary
Offline
Activity: 1456
Merit: 1000
|
|
May 11, 2015, 09:03:59 PM |
|
BATCH 5 SOLD OUT again
Interesting that it already happened. Maybe we can get lucky and get batch 6 with lower price . I can dream at least! It is very early in China, so if they might just need to look at it if was enough orders and switch back on with new shipping dates. All just guesses guess we will see.
|
|
|
|
|