ANTMINER S5: 1155GH(+OverClock Potential), In Stock $0.319/GH & 0.51W/GH

[notlist3d]

I was lucky, I got 4 fan Delta  ;DTFC1212DE-SP07 for $ 36 including shipping

That is a bargain.  Price is what sent me to the Sanyo.  But at less then 10 each that is a deal on delta's.

[aarons6]

I was lucky, I got 4 fan Delta  ;DTFC1212DE-SP07 for $ 36 including shipping

thats the fan i got to pair up to the stock fan, it flows alot of air.
the fan i got tho was reversed pwm, so i had to make an adapter.

[GigaBit]

I was lucky, I got 4 fan Delta  ;DTFC1212DE-SP07 for $ 36 including shipping

thats the fan i got to pair up to the stock fan, it flows alot of air.
the fan i got tho was reversed pwm, so i had to make an adapter.

Sure you get long enough wires??.... the ones on S5's connect to the PCB instead of the HashBoards.
Lot greater travel distance for the wire to connect.
Back then the S1 & S3 fans were interchangeable, the S5 killed that.
The difference is about 2 inches in wire length.
You may need to get your hands dirty or buy the fans directly from Bitmain.
Soldering's no big deal but was kind of stupid to omit the hashboard fan connectors.
Just hope they are long enough, then I'll know what to hunt.

Those 4,000 CFM fans ain't cheap, let alone with enough rope...

[aarons6]

I was lucky, I got 4 fan Delta  ;DTFC1212DE-SP07 for $ 36 including shipping

thats the fan i got to pair up to the stock fan, it flows alot of air.
the fan i got tho was reversed pwm, so i had to make an adapter.

Sure you get long enough wires??.... the ones on S5's connect to the PCB instead of the HashBoards.
Lot greater travel distance for the wire to connect.
Back then the S1 & S3 fans were interchangeable, the S5 killed that.
The difference is about 2 inches in wire length.
You may need to get your hands dirty or buy the fans directly from Bitmain.
Soldering's no big deal but was kind of stupid to omit the hashboard fan connectors.
Just hope they are long enough, then I'll know what to hunt.

Those 4,000 CFM fans ain't cheap, let alone with enough rope...

the wires were perfect length..
the fan i got use a reverse pwm signal. so instead of 0v full speed, and 5v stop, its 0v stop and 5v full speed..

im not sure if the fans he got are the same.

this was the fan i got
http://www.amazon.com/gp/product/B00L5XEKOS/ref=oh_aui_detailpage_o01_s00?ie=UTF8&psc=1

[thedreamer]

I ordered four of these fans, what do you think?

delta 120 mm 12 cm ventola pwm tfc1212de 252CFM

fabbricazione / marca
delta
modello / part number
TFC1212DE-SP07
dimensione / dimension
120 mm x 120 mm x 38 mm
tensione nominale
12 vdc
corrente nominale
4.0 amp
potenza nominale di ingresso
- watt
velocità della ventola
5500 numero di giri ( giri al minuto )
massimo flusso d'aria
252.8 cfm ( piedi cubi al minuto )
livello di rumore
66 db-a
pressione massima
35.88 mmh2o
tipo di cuscinetto
palla
terminazione
12 ? con 4 conduttori
connettore di alimentazione
4 pin
funzione / caratteristiche
controllo pwm / sensore di velocità ( put tach out )
rohs
rohs compliant

I have one. it's actually louder than the stock S5 fan. 

[aarons6]

I ordered four of these fans, what do you think?

delta 120 mm 12 cm ventola pwm tfc1212de 252CFM

fabbricazione / marca
delta
modello / part number
TFC1212DE-SP07
dimensione / dimension
120 mm x 120 mm x 38 mm
tensione nominale
12 vdc
corrente nominale
4.0 amp
potenza nominale di ingresso
- watt
velocità della ventola
5500 numero di giri ( giri al minuto )
massimo flusso d'aria
252.8 cfm ( piedi cubi al minuto )
livello di rumore
66 db-a
pressione massima
35.88 mmh2o
tipo di cuscinetto
palla
terminazione
12 ? con 4 conduttori
connettore di alimentazione
4 pin
funzione / caratteristiche
controllo pwm / sensore di velocità ( put tach out )
rohs
rohs compliant

I have one. it's actually louder than the stock S5 fan. 

it is at full volume but not at 50% and at 50% it flows more air then the stock fan.

[toptekk]

I was lucky, I got 4 fan Delta  ;DTFC1212DE-SP07 for $ 36 including shipping

thats the fan i got to pair up to the stock fan, it flows alot of air.
the fan i got tho was reversed pwm, so i had to make an adapter.

Sure you get long enough wires??.... the ones on S5's connect to the PCB instead of the HashBoards.
Lot greater travel distance for the wire to connect.
Back then the S1 & S3 fans were interchangeable, the S5 killed that.
The difference is about 2 inches in wire length.
You may need to get your hands dirty or buy the fans directly from Bitmain.
Soldering's no big deal but was kind of stupid to omit the hashboard fan connectors.
Just hope they are long enough, then I'll know what to hunt.

Those 4,000 CFM fans ain't cheap, let alone with enough rope...

OR


http://www.amazon.com/gp/product/B0055OLY88/ref=oh_aui_detailpage_o09_s00?ie=UTF8&psc=1

[alienesb]

I was lucky, I got 4 fan Delta  ;DTFC1212DE-SP07 for $ 36 including shipping

thats the fan i got to pair up to the stock fan, it flows alot of air.
the fan i got tho was reversed pwm, so i had to make an adapter.

Sure you get long enough wires??.... the ones on S5's connect to the PCB instead of the HashBoards.
Lot greater travel distance for the wire to connect.
Back then the S1 & S3 fans were interchangeable, the S5 killed that.
The difference is about 2 inches in wire length.
You may need to get your hands dirty or buy the fans directly from Bitmain.
Soldering's no big deal but was kind of stupid to omit the hashboard fan connectors.
Just hope they are long enough, then I'll know what to hunt.

Those 4,000 CFM fans ain't cheap, let alone with enough rope...

OR


http://www.amazon.com/gp/product/B0055OLY88/ref=oh_aui_detailpage_o09_s00?ie=UTF8&psc=1

Use the stock fan and just put this on it:

http://www.amazon.com/Zalman-Fan-Speed-Controller-FANMATE-2/dp/B000292DO0/ref=sr_1_2?s=electronics&ie=UTF8&qid=1431083011&sr=1-2&keywords=fanmate

I have used this for several miners and it lets you adjust the speed/sound/temp ratio just fine. Also, tape two of these in a line and put it on top of your miner to quiet it down even further. Make sure it extends past the fans a little bit:

http://www.amazon.com/gp/product/B008Y387B4/ref=oh_aui_search_detailpage?ie=UTF8&psc=1

[GigaBit]

I was lucky, I got 4 fan Delta  ;DTFC1212DE-SP07 for $ 36 including shipping

thats the fan i got to pair up to the stock fan, it flows alot of air.
the fan i got tho was reversed pwm, so i had to make an adapter.

Sure you get long enough wires??.... the ones on S5's connect to the PCB instead of the HashBoards.
Lot greater travel distance for the wire to connect.
Back then the S1 & S3 fans were interchangeable, the S5 killed that.
The difference is about 2 inches in wire length.
You may need to get your hands dirty or buy the fans directly from Bitmain.
Soldering's no big deal but was kind of stupid to omit the hashboard fan connectors.
Just hope they are long enough, then I'll know what to hunt.

Those 4,000 CFM fans ain't cheap, let alone with enough rope...

the wires were perfect length..
the fan i got use a reverse pwm signal. so instead of 0v full speed, and 5v stop, its 0v stop and 5v full speed..

im not sure if the fans he got are the same.

this was the fan i got
http://www.amazon.com/gp/product/B00L5XEKOS/ref=oh_aui_detailpage_o01_s00?ie=UTF8&psc=1

Awesome!  I do have 2 boards to adapt those fans, clusters of 3, I got two because I intended on getting more C1's and upgrade fans/rad.
Day I went to order C1... Sold Out! lol
So I overspent for an S5 but that's fine, better one of those than 5x S1's. 

I was lucky, I got 4 fan Delta  ;DTFC1212DE-SP07 for $ 36 including shipping

thats the fan i got to pair up to the stock fan, it flows alot of air.
the fan i got tho was reversed pwm, so i had to make an adapter.

Sure you get long enough wires??.... the ones on S5's connect to the PCB instead of the HashBoards.
Lot greater travel distance for the wire to connect.
Back then the S1 & S3 fans were interchangeable, the S5 killed that.
The difference is about 2 inches in wire length.
You may need to get your hands dirty or buy the fans directly from Bitmain.
Soldering's no big deal but was kind of stupid to omit the hashboard fan connectors.
Just hope they are long enough, then I'll know what to hunt.

Those 4,000 CFM fans ain't cheap, let alone with enough rope...

OR


http://www.amazon.com/gp/product/B0055OLY88/ref=oh_aui_detailpage_o09_s00?ie=UTF8&psc=1

That's brilliant!!  Been looking for this for ages.... well... in bitcoin mining this means a few weeks. 
Yet again, amazon ain't normally my place to buy computer parts.

Thanks, both of ya's, now I have a plan of attack but it's still kinda cool right now, hottest temperature in the mine is only 35c...
Besides, I'll be putting in an air blower next month but adding a second fan should increase resale value... plus in case the blower fails.

I'm more worried about temperature than I am with the noise.
My Miner's white noise help me sleep at night.

[tvasbn]

What exactly the deal whit batch 6, its only for bulk buyers?

[FlensGold]

Any idea when S5 will be available again? Will there be another batch?

[notlist3d]

What exactly the deal whit batch 6, its only for bulk buyers?

It was partially for "3rd generation chip BM1384. Due to International Labor Day, no shipping will be arranged from April 30th till May 3rd. April 28 is the last shipping date for bulk buy orders and April 29 is the last shipping date for small orders...."

So I guess we see next if they have something up their sleeve or of they will do another batch.   It could just be they are filling bulk orders from the holiday and catching up.

[Rabinovitch]

Any idea when S5 will be available again? Will there be another batch?

Probably only Bitmain can say.

[Darthswan]

get tap and die kit . those kits remove screws but like some one said it destroys the screw and you may need to re tap the hole to a bigger screw depends on how care full you are when you remove it and how bad it was striped in the hole .At least that was what it was called a long a time ago it may have  another name now . i haven't used a kit in a few years .

Finally got it loose. 

[tutorialevideo]

antminer s5 batch 5 is on again! you can buy new miners

[notlist3d]

antminer s5 batch 5 is on again! you can buy new miners

I would say it was just catching up from International Labor Day.  Now they are back and ready to sell.

[Xian01]

antminer s5 batch 5 is on again! you can buy "new" miners

FTFY.

[tutorialevideo]

antminer s5 batch 5 is on again! you can buy "new" miners

FTFY.

Sorry for my english

[tutorialevideo]

BATCH 5 SOLD OUT again

[notlist3d]

BATCH 5 SOLD OUT again

Interesting that it already happened.  Maybe we can get lucky and get batch 6 with lower price .  I can dream at least!

It is very early in China, so if they might just need to look at it if was enough orders and switch back on with new shipping dates. 

All just guesses guess we will see.