[ANN] 10k Coin | Now with 10% PoS and 10000% Superblocks | 10k/MMXIV Market OPEN

[real789]

jancok ah .. lier aing mah , alay lebay kawas tai busuk dev .  ngepet wae siah mah

Good work dev . I like ths coin

what do you want?? use universal language please can i help you?

[djselery]

Send your coins to a new address and I'm fairly confident you'll reappear; they are most likely in a change address

Correct, that is what I figured out, new addresses are visible on the on the explorer.

Didn't work for me... hmm, guess ill be a ghost in the network. still staking just fine.

[Mattei]

There are no forks. One of the seed nodes is a checkpoint server so it will verify each block whenever you open your client

The block explorer may have a frozen daemon or something, I don't know, but the network itself is not in trouble

If balances are incorrect, use repairwallet. If there is still a difference you can import private keys manually into a fresh wallet.dat

No. Anyone on 1.0.1 is now on their own chain with other 1.0.1 clients

We can ban by updating protocol versions, but there is no reason to make people update again since they are not an issue if you're on 2.0.2

If you are still on 1.0.1, you've had more than a month to update. Now you're fucked. Anything after block 360k will not show up, as everyone else is on the correct version

Forks chains same thing right?  Who runs the explorer?  Was looking into how it works a few weeks back and read that it binds to a wallet. Is the wallet the explorer is bound to version 2.0.2?  Silly question but explorer is not accurate.

[iGotSpots]

There are no forks. One of the seed nodes is a checkpoint server so it will verify each block whenever you open your client

The block explorer may have a frozen daemon or something, I don't know, but the network itself is not in trouble

If balances are incorrect, use repairwallet. If there is still a difference you can import private keys manually into a fresh wallet.dat

No. Anyone on 1.0.1 is now on their own chain with other 1.0.1 clients

We can ban by updating protocol versions, but there is no reason to make people update again since they are not an issue if you're on 2.0.2

If you are still on 1.0.1, you've had more than a month to update. Now you're fucked. Anything after block 360k will not show up, as everyone else is on the correct version

Forks chains same thing right?  Who runs the explorer?  Was looking into how it works a few weeks back and read that it binds to a wallet. Is the wallet the explorer is bound to version 2.0.2?  Silly question but explorer is not accurate.

Ok, well, there's no accidental forks then

dasource runs the explorers for all 3 of my coins

[iGotSpots]

And just to clarify...clients on 1.0.1 will deem all 2.0.2 blocks as invalid and vice-versa, even if they are 'connected' to each other. This is the same as shitty alts showing BTC or LTC peers

[darkangelos]

Hello,

I have a problem with my wallet, I updated the software version 2.0.2, just to have something toujous correct. Copy of wallet.dat biensur. Reimportation in the folder and perform a repairwallet perform.

Until then, no problem (well almost. No balance in full but not serious in am. By cons, when I wanted to move all the parts, I had an error that my close my wallet me basically saying that the transaction is not valid for any of the exhibits ,. Now impossible to reopen with a nice error message:

A fatal error occurend. No. 10k can continue along Safely and Will quit
EXCEPTION: St13runtine_error
CWallet :: getcredit (): value out of range
d: \ 10k-qt-win \ 10k-qt.exe exception is Runaway

I participated in this room since ago, and I always keep everything. Its just hurts me to have to lose everything now after almost three months of operation.

Can you help me?
Cordially

[leroyjankins]

Hello,

I have a problem with my wallet, I updated the software version 2.0.2, just to have something toujous correct. Copy of wallet.dat biensur. Reimportation in the folder and perform a repairwallet perform.

Until then, no problem (well almost. No balance in full but not serious in am. By cons, when I wanted to move all the parts, I had an error that my close my wallet me basically saying that the transaction is not valid for any of the exhibits ,. Now impossible to reopen with a nice error message:

A fatal error occurend. No. 10k can continue along Safely and Will quit
EXCEPTION: St13runtine_error
CWallet :: getcredit (): value out of range
d: \ 10k-qt-win \ 10k-qt.exe exception is Runaway

I participated in this room since ago, and I always keep everything. Its just hurts me to have to lose everything now after almost three months of operation.

Can you help me?
Cordially

First try to restart your computer. Usually that error requires a restart of the computer, I would also delete all files except for wallet.dat in the %appdata%/roaming folder and the launch 10k qt again downloading the correct block chain since you just upgraded the wallet.

[real789]

i'm very confused why my balance wrong i see in block explore 2245509183
but on wallet is only 1583285377

i try repair wallet and i get true ?

06:42:17

repairwallet


06:42:17

{
"wallet check passed" : true
}


what can i do ?

[MisterGreen]

i'm very confused why my balance wrong i see in block explore 2245509183
but on wallet is only 1583285377

i try repair wallet and i get true ?

06:42:17

repairwallet


06:42:17

{
"wallet check passed" : true
}


what can i do ?

Do a rescan on the wallet. Make a link of the 10k-Qt.exe and insert in the targetline behind the exe "-rescan" and run it. Then you should have the right amount in your wallet.

[leroyjankins]

Do a rescan on the wallet. Make a link of the 10k-Qt.exe and insert in the targetline behind the exe "-rescan" and run it. Then you should have the right amount in your wallet.

Unless you have stakes that haven't been fully confirmed yet, in which case your correct balance will be shown once those staked coins are spendable again.

[real789]

Do a rescan on the wallet. Make a link of the 10k-Qt.exe and insert in the targetline behind the exe "-rescan" and run it. Then you should have the right amount in your wallet.

Unless you have stakes that haven't been fully confirmed yet, in which case your correct balance will be shown once those staked coins are spendable again.

This is more than 3days,, i'm waiting for my balance and i not get anything
my wallet not in staking you can see in here
no transaction more than 3days http://10k.blockexplorer.cc/address/TSjmJafXNRrRNJU1WM2zn1GkgRjkGhvjow

i try send all of amount to my other adress  and i get succes

Status: 543 confirmations, broadcast through 4 nodes
Date: 4/16/2015 06:40
Debit: -1583285377.6021 10k
Credit: 1583285377.6021 10k
Transaction fee: -0.000002 10k
Net amount: -0.000002 10k
Transaction ID: 2e3cdbd919071c30af1e4f28bf8e3b0b8ed27977983b6aa9eb2229f4c6685d6e

but i can't see it in block explore

[MisterGreen]

Do a rescan on the wallet. Make a link of the 10k-Qt.exe and insert in the targetline behind the exe "-rescan" and run it. Then you should have the right amount in your wallet.

Unless you have stakes that haven't been fully confirmed yet, in which case your correct balance will be shown once those staked coins are spendable again.

This is more than 3days,, i'm waiting for my balance and i not get anything
my wallet not in staking you can see in here
no transaction more than 3days http://10k.blockexplorer.cc/address/TSjmJafXNRrRNJU1WM2zn1GkgRjkGhvjow

i try send all of amount to my other adress  and i get succes

Status: 543 confirmations, broadcast through 4 nodes
Date: 4/16/2015 06:40
Debit: -1583285377.6021 10k
Credit: 1583285377.6021 10k
Transaction fee: -0.000002 10k
Net amount: -0.000002 10k
Transaction ID: 2e3cdbd919071c30af1e4f28bf8e3b0b8ed27977983b6aa9eb2229f4c6685d6e

but i can't see it in block explore

I wouldn't worry that much about not appearing on the blockexplorer as long as your wallet is staking properly.
It looks like that the blockexplorer is having a problem, stopped demon or the api couldn't handle that many transactions from the staking or the server of the blockexplorer just needs a reboot. The rich list is also looking odd.

[real789]

Do a rescan on the wallet. Make a link of the 10k-Qt.exe and insert in the targetline behind the exe "-rescan" and run it. Then you should have the right amount in your wallet.

Unless you have stakes that haven't been fully confirmed yet, in which case your correct balance will be shown once those staked coins are spendable again.

This is more than 3days,, i'm waiting for my balance and i not get anything
my wallet not in staking you can see in here
no transaction more than 3days http://10k.blockexplorer.cc/address/TSjmJafXNRrRNJU1WM2zn1GkgRjkGhvjow

i try send all of amount to my other adress  and i get succes

Status: 543 confirmations, broadcast through 4 nodes
Date: 4/16/2015 06:40
Debit: -1583285377.6021 10k
Credit: 1583285377.6021 10k
Transaction fee: -0.000002 10k
Net amount: -0.000002 10k
Transaction ID: 2e3cdbd919071c30af1e4f28bf8e3b0b8ed27977983b6aa9eb2229f4c6685d6e

but i can't see it in block explore

I wouldn't worry that much about not appearing on the blockexplorer as long as your wallet is staking properly.
It looks like that the blockexplorer is having a problem, stopped demon or the api couldn't handle that many transactions from the staking or the server of the blockexplorer just needs a reboot. The rich list is also looking odd.

i think wallet have problem too if only block explorer eror i 'm still can get my staking
no staking that take more than 3 days
usually i get my staking in 1-2 days

and spot must fix this seriously problem

[whyyousoserious]

220bil weight 

[vgl1]

гдe мoнeты cyки, вce вaши ёбaнныe pecкaны нe пoмoгaют.

[iGotSpots]

If repairwallet came back true, then the balances for the addresses in that wallet.dat are accurate

[real789]

If repairwallet came back true, then the balances for the addresses in that wallet.dat are accurate

my balance is not accurate ceck my post
look block explore and my pict

[iGotSpots]

If repairwallet came back true, then the balances for the addresses in that wallet.dat are accurate

You can type getinfo to bypass UI display but repairwallet returning true means nothing is mismatched

[Arie22]

If repairwallet came back true, then the balances for the addresses in that wallet.dat are accurate

You can type getinfo to bypass UI display but repairwallet returning true means nothing is mismatched

Any plan for this coin DEV ?

No one buy right now..

[Pab]

BTC Pool has trouble with MMXV wallet,long time trouble already