[HYP] HyperStake | Generous Reward Staking | Advanced Staking Controls & Wallet

[joef]

It´s not working for me even if I´ve blocked all the incoming traffic. Still going to miss most of the transactions as "unconfirmed". I think the last option is to re-do the staking? Now with larger block size per block (current 16K per block)...?

So you got a confirmed block. That means your config is working in general. The confirmation is independent of the blocksize. Maybe your device is very slow? In that case others may get a block confirmed before your block is confirmed. Be sure to have a lot of connections to the HyperStake network. Add all the nodes listed on http://www.presstab.pw/phpexplorer/HYP/nodes.php to your config file. I don't need to block any HYP traffic.

I have added
maxconnections=100
to my config file and have 99 connections active.

[1715109064]

1715109064

[1715109064]

1715109064

[1715109064]

1715109064

[1715109064]

1715109064

[~Trololoh~]

@Pokstakeko
Have you blocked all incoming traffic ?

@Trololoh Yes I’ve now blocked all the incoming traffic - except Hyperstake. Can I / should I block that as well?

You should block Hyperstake only.
Or add in config :
listen=0

OK - I see. That´s done now. Let´s hope this works. Thanks for the tips again @Trololoh

It´s not working for me even if I´ve blocked all the incoming traffic. Still going to miss most of the transactions as "unconfirmed". I think the last option is to re-do the staking? Now with larger block size per block (current 16K per block)...?

Your problems with orphans seems to have a different reason then mine.

Change settings back to normal, allow incoming traffic.
In config :
listen=1
maxconnections=100

Read billotronics post about getting your system time correct :
https://eclecticlight.co/2017/10/27/has-anyone-got-the-time-how-high-sierra-has-changed-time-synchronisation/

[bitmaster1x]

https://www.crypto-city.com/index.php/photo/9606/hyperstake-missexchange-2018/feed_2652

[bitmaster1x]

Get up and running in minutes - Not hours or days.

I've simplified the blockchain snapshot and instructions.

https://www.crypto-city.com/index.php/hyperstake-hyp-ann/info

[cointopper]

Hello HyperStake believers,

Our aim is to add value to the whole crypto community by giving the best user experience to analyse cryptocurrencies.

It would be really great help from your side if you can spend 60 seconds of your time and give us your valuable feedback for our two recent updates 1) Snapshot and 2) Colourful interface of HyperStake at: https://cointopper.com/coin/hyperstake

Constructive criticisms are always welcome at CoinTopper.  Thank you!!

[bitmaster1x]

Hello HyperStake believers,

Our aim is to add value to the whole crypto community by giving the best user experience to analyse cryptocurrencies.

It would be really great help from your side if you can spend 60 seconds of your time and give us your valuable feedback for our two recent updates 1) Snapshot and 2) Colourful interface of HyperStake at: https://cointopper.com/coin/hyperstake

Constructive criticisms are always welcome at CoinTopper.  Thank you!!

Looks good.

[cointopper]

Hello HyperStake believers,

Our aim is to add value to the whole crypto community by giving the best user experience to analyse cryptocurrencies.

It would be really great help from your side if you can spend 60 seconds of your time and give us your valuable feedback for our two recent updates 1) Snapshot and 2) Colourful interface of HyperStake at: https://cointopper.com/coin/hyperstake

Constructive criticisms are always welcome at CoinTopper.  Thank you!!

[dac10]

A strange thing is happening with my wallet v.1.1.5.0!
Today, I received more than 150 blocs...all blocs from 1000Hyp.
Am I on the wrong fork?
It's true, I have a lot of weight, but I've never received so many blocs in a day.

[dac10]

A strange thing is happening with my wallet v.1.1.5.0!
Today, I received more than 150 blocs...all blocs from 1000Hyp.
Am I on the wrong fork?
It's true, I have a lot of weight, but I've never received so many blocs in a day.

They were all orphans!!!

[~Trololoh~]

A strange thing is happening with my wallet v.1.1.5.0!
Today, I received more than 150 blocs...all blocs from 1000Hyp.
Am I on the wrong fork?
It's true, I have a lot of weight, but I've never received so many blocs in a day.

They were all orphans!!!

So are you on the wrong fork ?

[dac10]

A strange thing is happening with my wallet v.1.1.5.0!
Today, I received more than 150 blocs...all blocs from 1000Hyp.
Am I on the wrong fork?
It's true, I have a lot of weight, but I've never received so many blocs in a day.

They were all orphans!!!

So are you on the wrong fork ?

I'm not on the wrong fork, they were all orphans, so I restarted Wallet.
However, I closed v.1.1.5.0 and restarted v. 1.1.4.0.

[bitmaster1x]

Hyperstake (HYP) on the Crypto Hub Exchange Coming Soon.




https://www.crypto-city.com/index.php/photo/9627/hyperstake-hyp-on-crypto-hub-exchange-coming-soon/

[bitmaster1x]

I'm going to add a note on the HYP Cypto-city page for Exchanges that they should stick with HYP v1.1.3 as it is the most stable and reliable version instead of later versions.

[~Trololoh~]

I'm going to add a note on the HYP Cypto-city page for Exchanges that they should stick with HYP v1.1.3 as it is the most stable and reliable version instead of later versions.

Can users downgrade from newer versions ?

[bitmaster1x]

I'm going to add a note on the HYP Cypto-city page for Exchanges that they should stick with HYP v1.1.3 as it is the most stable and reliable version instead of later versions.

Can users downgrade from newer versions ?

Yes. You'll just need to delete everything in the appdata hyperstake folder except the wallet.dat and then resync. As always. Make backups before doing anything. If you're not having issues, I'd leave it alone.

[~Trololoh~]

I'm going to add a note on the HYP Cypto-city page for Exchanges that they should stick with HYP v1.1.3 as it is the most stable and reliable version instead of later versions.

Can users downgrade from newer versions ?

Yes. You'll just need to delete everything in the appdata hyperstake folder except the wallet.dat and then resync. As always. Make backups before doing anything. If you're not having issues, I'd leave it alone.

What issues have been reported ?

[Pokstakeko]

It´s not working for me even if I´ve blocked all the incoming traffic. Still going to miss most of the transactions as "unconfirmed". I think the last option is to re-do the staking? Now with larger block size per block (current 16K per block)...?

So you got a confirmed block. That means your config is working in general. The confirmation is independent of the blocksize. Maybe your device is very slow? In that case others may get a block confirmed before your block is confirmed. Be sure to have a lot of connections to the HyperStake network. Add all the nodes listed on http://www.presstab.pw/phpexplorer/HYP/nodes.php to your config file. I don't need to block any HYP traffic.

I have added
maxconnections=100
to my config file and have 99 connections active.

@joef Thanks for the answer. stupid question - where do I find my .conf file (I got Mac). Was not able to find it from my Hyperstake-folder. There I´ve only .dat and .log files ...besides the bootstrap-file...

[bitmaster1x]

I'm going to add a note on the HYP Cypto-city page for Exchanges that they should stick with HYP v1.1.3 as it is the most stable and reliable version instead of later versions.

Can users downgrade from newer versions ?

Yes. You'll just need to delete everything in the appdata hyperstake folder except the wallet.dat and then resync. As always. Make backups before doing anything. If you're not having issues, I'd leave it alone.

What issues have been reported ?

Only issue I'm seeing so far is v1.1.5.1 not completely syncing in Ubuntu, but others have reported no issue in other OS'

[bitmaster1x]

It´s not working for me even if I´ve blocked all the incoming traffic. Still going to miss most of the transactions as "unconfirmed". I think the last option is to re-do the staking? Now with larger block size per block (current 16K per block)...?

So you got a confirmed block. That means your config is working in general. The confirmation is independent of the blocksize. Maybe your device is very slow? In that case others may get a block confirmed before your block is confirmed. Be sure to have a lot of connections to the HyperStake network. Add all the nodes listed on http://www.presstab.pw/phpexplorer/HYP/nodes.php to your config file. I don't need to block any HYP traffic.

I have added
maxconnections=100
to my config file and have 99 connections active.

@joef Thanks for the answer. stupid question - where do I find my .conf file (I got Mac). Was not able to find it from my Hyperstake-folder. There I´ve only .dat and .log files ...besides the bootstrap-file...

The HyperStake.conf is not automatically created, You'll need to create one in the same directory as the wallet.dat if you need it.

[~Trololoh~]

I'm going to add a note on the HYP Cypto-city page for Exchanges that they should stick with HYP v1.1.3 as it is the most stable and reliable version instead of later versions.

Can users downgrade from newer versions ?

Yes. You'll just need to delete everything in the appdata hyperstake folder except the wallet.dat and then resync. As always. Make backups before doing anything. If you're not having issues, I'd leave it alone.

What issues have been reported ?

Only issue I'm seeing so far is v1.1.5.1 not completely syncing in Ubuntu, but others have reported no issue in other OS'

Runs ok on my box with Ubuntu 16.04 LTS.
But maybe I am just lucky.