They are talking 3080’s...you dont have any of those

Ive found using miner-manager script i can keep current version of miners.  As for Claymore if a new version doesnt come out ill move them to another miner software.  4gb cards will be able to mine ETC due to dag reduction so may squeeze more life out of them yet,

You wont get much Fpga for $100 or less.
The best choices are the FPGA with HBM memory built  into them 8 or 16gb units.
These sre going to run many times what your current budget is.
Anything less is only good for compute heavy algos that are already saturated.
The memory hard stuff is where they shine. 

Understand without bitstreams for your specific FPGA they do nothing.  Bitstreams are the critical bit needed to make them work.  Do you research before jumping in.  I would say you are looking at $700- $4000 depending on how powerful and size of unit. 

No idea.... watching one of the rigs now.  4 x 570x4gb 2x570x8gb (they are gpu 5/6 in the rig) is hashing happily away on 5.0e and doing (30.273/31.131/31.130/31.120/29.925/29.929mh) with volt set to 825 on each and 1145 cor 2100 mem....

I dont usually update miner unless problem or major improvement.

Mine are all running just fine...on eth...on linux...30 some odd 4gb 570s
Mine rigs are on 5.0e and one is 5.1c.

So appears soon i will need to update the miner. 

Being a native myself i dont see it as anti-native....more along the Dont Tread On Me type saying...that makes a perfect paroble of modern technology.  An who hasnt as an enthusiast jumped in and gotten bitten so to speak. 

Wisdom comes right after you need it, if you are willing to listen.

You can always tell the pioneers....by the arrows in their backs.

Ive slowly migrating to MMPOS...it is a pay per month.  I dont think we will see an Ethos type pay once type OS especially one that lasted so long.   I like the folks behind MMPos and am impressed with the performance level.  Ive tried Hive, SMos and a fw others.  Ive even got a couple windows and straight ubuntu systems.

Ive made do with Miner-manager script for Ethos to side load new miners.  And even loaded cpu miners onto the systems and a few small FPGA boards.  One of the other reasons im partial to MMPOS is they support all of that. 


Looks like 2021 will require a lot of changes.  Figure ill ride out the 4gb eth before resorting rigs because currently most are mixed 4/8gb gpus.  Ive mapped it out on paper,..now just a matter of end of december forcing it. 

And one last comment why mmpos won me over...no issue with mixed rigs.  (amd/nvidia)

/sorry if rambling been changing a dump valve on a waste water system and friggen beat.....

Ive ordered ASCIS from Bitmain...there is no indirect.  You either order from them or you are dealing with a 3rd party. 

If you paid cmc and they didnt eliver your problem is with them. The units Bitmain sells shipped.  You even have a poster confirming this and that Bitmain provided coupons for later than scheduled delivery.  Because thats what Bitmain does.  Why CMC doesnt have your unit or refund is between you and them.   But thats the part that is the problem. 

From Bitmains own site regarding buying Bitmain gear. Bullet Point #1

https://support.bitmain.com/hc/en-us/articles/360010915534-Miner-swapping-scam-How-to-handle-and-avoid-becoming-a-victim


Sorry about your trouble.

You did NOT order from Bitmain...so how can you never again order a miner from Bitmain....YOU NEVER DID.

You ordered from some website that isnt Bitmain.  Maybe focus your ire at coinminingcentral.com.   You could easily have ordered from Bitmain, but didnt.     

but but but but....ill take sarcasm for $300 Alex....

Well everywhere i can find HAC it is Hackspace Capital.  Yobit lists HAC but it is the Hackspace Capital not this coin.

So is this coin actually on an exchange? 

Trying to get fundimentals and trade volume data but cannot find it on any of the coin sites (gecko, cmc etc). 
Can you link anyplace it shows this data?

No it may be some hacked version or whatever but Ethos is only available from gpushack.com legally.  But if you are going to buy a license look at more modern oses.  I am still a 25+ rigs on ethos....i have 60 total...but old rigs are long since roi’d and gone.

Oh man.  That place....not a good place for miners.  You will get them but you will pay high fees and hassle.  Probably will have to send out to Freewallet or some other high fee wallet.  I mine only at pools that pay direct to my wallet....if you dont have the keys to the wallet then you dont actually own the coins.

If you look at the picture the lower right power plug is discolored from either arcing or from thermal stress.  This may be the issue with the cap losing it.   

Ah understand now.  Sorry my iMac Pro had this in built in Radeon Pro Vega 64 with 16GB of HBM2 memory   i could make it mine under linux / mac osx but would get about 25% reject due to something unique as only apple can do.

Then dont no one is forcing you too.  But you do get to enjoy the price bump from it for now. 

Generally the Apple version of the gpus is tweaked enough to not be fully supported by any miner i know of.  The gpu version apple uses is unique to Apple.  Check and see as i have seen many miners producing invalid or incorrect shares when on the mac especially when using the gpus.  On my Mac Pro i was able at one point to mine but about 25% of the shares were invalid due to some incompatibility with miner/GPU.

These days it costs more in ETH earnings to dual mine then it is to just straight mine ETH.
All my rigs are on straight ETH.

Yes correct.  Saw the last part of the error and brain blanked 🤪