Two of my orders seem to be coming through just fine but one of them is showing this exception:
and all three of them show:
22:53 A flight delay occurred because of aircraft mechanical reasons. / Released by Clearing Agency. Now in-transit
Strange as I imagine that all of the packages have the exact same info on them; should I contact UPS / Bitmain?
All of mine have this as well. Nothing to worry about now though as it all seems to be moving along. |
|
|
|
|
Not you, the dumbass that you quoted. Magiconline
|
|
|
|
|
Course not. Hence my moron comment
|
|
|
|
|
Something is still rotten in Denmark.
|
|
|
|
|
No.
As long as it is still hashing and accepting shares on your pool then there is nothing to worry about.
If you do not like seeing the xxx just restart and it should clear.
|
|
|
|
I am not fooled. I know there is a lot of FUD being thrown around and his is just painfully obvious.  |
|
|
|
What the fuck are you smoking Searing ? Can I have some ?  |
|
|
|
|
I would not mess with the setx settings. Just use what works right for everyone which are:
setx GPU_USE_SYNC_OBJECTS 1
and
setx gpu_max_alloc_percent 100
|
|
|
|
weird as,,,, K-dev miner working fine as in PERFECT different GPU threads etc....
But SG miner I used the EXACT same BATCH file but offcourse changed CGminer to >> sgminer and it doesnt work so the commands are not indentical wwhich is what i was dreading hopefully its just one silly little command change but ?? suggestions?
I CANNOT beleive the difference in K-dev cgminer WOW ... SO stable fair enough the KH is alittle less on the 290 880KH but its very stable and no rejections yet. NO SG miner,,, why isnt this working i thought its the same commands am I missing something here? I cannot comment as I do not use a batch file I just use cgwatcher to adjust my settings via sgminer.conf file. DAMMIT  SOLVED- Since SGMINER is specifically for scrypt no need for --scrypt. I figured that out all by myself ,, *Pats himself on the back ahh i feel good lool lol, that was rule number one for running sgminer for scrypt. |
|
|
|
weird as,,,, K-dev miner working fine as in PERFECT different GPU threads etc....
But SG miner I used the EXACT same BATCH file but offcourse changed CGminer to >> sgminer and it doesnt work so the commands are not indentical wwhich is what i was dreading hopefully its just one silly little command change but ?? suggestions?
I CANNOT beleive the difference in K-dev cgminer WOW ... SO stable fair enough the KH is alittle less on the 290 880KH but its very stable and no rejections yet. NO SG miner,,, why isnt this working i thought its the same commands am I missing something here? I cannot comment as I do not use a batch file I just use cgwatcher to adjust my settings via sgminer.conf file. |
|
|
|
Thank god some sensibility has returned to the thread. I give it 5 minutes.... tops. You're just a troll.  |
|
|
|
--scrypt -o stratum+tcp://middlecoin.com:3333 -u BLABLABLABLABLBA -p x --failover-only -o stratum+tcp://amsterdam.middlecoin.com:3333 -u BLABLABLABLALBA -p x -I 13,13,19 -g 2 -w 256,256,512 --thread-concurrency 8192,8192,24550 --gpu-engine 1080,1080,1000 --gpu-memclock 1500,1500,1500 --temp-target 70 --auto-fan --gpu-fan 76 --gpu-powertune 20
For the R9 290 should the worksize be at 512? well it is a 512 bit card, and I have seen many ppl do it.. Ok well I just changed it to 256 and I Back to 20 Lets seee Does anyone know how to change the - G 2..... for multiple cards in the batch file ? You can only do that with the miners posted above your post or with kalroth's version of cgminer. I do not have the link to that but if you do a search you can find it. If not I can send you a copy. To be honest I would use sgminer anyway as it gave me a boost in mhz on some cards while also having better stability especially with R9 cards. thanks gamers I think I am downloading it now I googled it K-dev etc etc.. windows verions... Anyway with SGminer can CGwatcher see it? Yes CGwatcher and CGremote both work fine with sgminer. I use them both. |
|
|
|
Thank god some sensibility has returned to the thread. I give it 5 minutes.... tops. |
|
|
|
--scrypt -o stratum+tcp://middlecoin.com:3333 -u BLABLABLABLABLBA -p x --failover-only -o stratum+tcp://amsterdam.middlecoin.com:3333 -u BLABLABLABLALBA -p x -I 13,13,19 -g 2 -w 256,256,512 --thread-concurrency 8192,8192,24550 --gpu-engine 1080,1080,1000 --gpu-memclock 1500,1500,1500 --temp-target 70 --auto-fan --gpu-fan 76 --gpu-powertune 20
For the R9 290 should the worksize be at 512? well it is a 512 bit card, and I have seen many ppl do it.. Ok well I just changed it to 256 and I Back to 20 Lets seee Does anyone know how to change the - G 2..... for multiple cards in the batch file ? You can only do that with the miners posted above your post or with kalroth's version of cgminer. I do not have the link to that but if you do a search you can find it. If not I can send you a copy. To be honest I would use sgminer anyway as it gave me a boost in mhz on some cards while also having better stability especially with R9 cards. |
|
|
|
10% rejection rate WTF?  ? 280x TOXIC 749.7K/750.7Kh/s | A:29696 R: 0 HW0 I13 = Cannot go above I 13 HW errors GALORE 280x TOXIC 747.0K/750.1Kh/s | A:39936 R: 0 HW0 I13 = Cannot go above I 13 HW errors GALORE 290 TOXIC 896.1K/895.3Kh/s | A:33792 R:12288 HW0 I20 = These can handle it and many people do it as a NORM I have tried I17 - I18 - I19 REjction rate is hover between 5-10% 1. asia.middlecoin.com Backup 2.middlecoin.com It cant be the same settings mannn everyone I see has these 290 settings, By the way the Top 2 cards are 280x Where the HELL is H20 is he seriusly wanting people to go.. is this his plan, Id laugh if ever one goes and Kaapuffffffffff 0 Pay out for him anymore What the fuck are you talking about. You have an issue with one of your cards and its configuration as it is clearly seen by your numbers posted what do you expect H2 to communicate to you about that ? Also how do you figure rejection rate has anything to do with the intensity setting for a card ? None of what you said makes any sense. From the looks of the speed you are getting with the 290 I would say your rejection rates are due to your current clock speeds of the card. Did you even think about that or are you so stubborn that you think you should get the max speed with no ill effects for anything else. Please don't now tell me that others claim to have the same clock speeds for that card but get lower rates. Each card and system is different aside from the fact that just because something is posted on the Internet does not necessarily mean it is true or has not been massaged a bit. You want to fix your problem I suggest you look at the clock speeds on that card and adjust them accordingly. You have to find a balance between high hash rate and errors/rejects/stales for the given pool and or coin you are mining. WHAT IN THE NAME OF THE WORD -====FUCK===- ARE YOU TALKING ABOUT??? I just changed servers and now look 749.7K/750.3Kh/s | A:28672 R: 0 744.0K/749.5Kh/s | A:20480 R: 0 922.8K/894.3Kh/s | A:22528 R:1024 1.2% Rejection rate with the other server. The setting on my cards are what MANY 290's holder do You think I have not researched get your facts right before talking!!! I HAVE NOW BEEN MINING ALMOST AS LONG AS I WAS WITH THE OTHER SERVER AND LOOK AT THE REJECT RATE DIFFFERENCE HAS NOTHING TO DO WITH CARD SETTINGS, I MINED OTHER POOLS WITH NO PROBLEM So you are saying that middlecoin has a problem only with your (or others)290's but not 280's ? Your data you posted points to the 290 as the problem right ? Stop writing in caps too it is immature. It does not help you get your point across any better. |
|
|
|
10% rejection rate WTF? ? 280x TOXIC 749.7K/750.7Kh/s | A:29696 R: 0 HW0 I13 = Cannot go above I 13 HW errors GALORE 280x TOXIC 747.0K/750.1Kh/s | A:39936 R: 0 HW0 I13 = Cannot go above I 13 HW errors GALORE 290 TOXIC 896.1K/895.3Kh/s | A:33792 R:12288 HW0 I20 = These can handle it and many people do it as a NORM I have tried I17 - I18 - I19 REjction rate is hover between 5-10% 1. asia.middlecoin.com Backup 2.middlecoin.com It cant be the same settings mannn everyone I see has these 290 settings, By the way the Top 2 cards are 280x Where the HELL is H20 is he seriusly wanting people to go.. is this his plan, Id laugh if ever one goes and Kaapuffffffffff 0 Pay out for him anymore What the fuck are you talking about. You have an issue with one of your cards and its configuration as it is clearly seen by your numbers posted what do you expect H2 to communicate to you about that ? Also how do you figure rejection rate has anything to do with the intensity setting for a card ? None of what you said makes any sense. From the looks of the speed you are getting with the 290 I would say your rejection rates are due to your current clock speeds of the card. Did you even think about that or are you so stubborn that you think you should get the max speed with no ill effects for anything else. Please don't now tell me that others claim to have the same clock speeds for that card but get lower rates. Each card and system is different aside from the fact that just because something is posted on the Internet does not necessarily mean it is true or has not been massaged a bit. You want to fix your problem I suggest you look at the clock speeds on that card and adjust them accordingly. You have to find a balance between high hash rate and errors/rejects/stales for the given pool and or coin you are mining. |
|
|
|
Switched to Clevermining, been on it for 12 hours and the totals are right in line with this estimate. After days of sub 0.01 on Middlecoin, this is such a relief. I don't mind growing pains but the lack of communication/reassurance from h20 is a bit much. I don't doubt he works hard on it, but a bit more communication would do wonders to keeping your workers happy. Jumping ship until I see MC back to being stable. The constant up/downs, rejects, bugged stats... just can't do it anymore!
Word!! Hes last reply was the 19th of January Last communication was yesterday. Check twitter link http://www.middlecoin.com/ |
|
|
|
|
Show Posts
