|
Best I can offer you is 100btc for everything without the bitmine contract + shipping. (import is going to be a killer into the UK)
|
|
|
|
As another heads up - Bitmain have recently upgraded their support capabilities, locations etc.. I'd had the pleasure to use their support services recently and I couldnt be happier, they were brilliant
More details on their new support contacts (if anyone else needs them) :
****************************
Bitmain Technologies
Warranty Department
3700 Quebec Street Suite 100239
Denver, Colorado 80226
USA
Telephone number: 1-844-248-6246
or for the European Region
Bitmain Technologies
department 119,
143 kingston road,
London, SW19 1LJ,
United Kingdom
Telephone Number: +44-020-30024099
For US customers Please include our telephone number 1-844-248-6246 on the shipping label.
and for the European Region
Please include our telephone number +44-020-30024099 on the shipping label.
These are just mail forwarding addresses btw. |
|
|
|
Welp 5 days in and my antminer s3+ caught fire!   This literally just happened like 5 minutes ago. Rig went offline, went out to see what's what and try and give it a power cycle, no go.. So I swapped the psu for a brand new one and went to turn it on and was met with a huge cloud and smoke and an adrenaline rush. (all cables correct etc, I have 9 others from the same batch running on the same corsair rm1000 PSUs with uptimes of 5 days, no overclocking involved)  Does anyone have info for UK bitmain support? Just tried calling the UK number above and its just a mailing forward address. |
|
|
|
5 days in and my antminer s3+ caught fire! This literally just happened like 5 minutes ago. Rig went offline, went out to see what's what and try and give it a power cycle, no go.. So I swapped the psu for a brand new one and went to turn it on and was met with a huge cloud and smoke and an adrenaline rush. (all cables correct etc, I have 9 others from the same batch running on the same corsair rm1000 PSUs with uptimes of 5 days, no overclocking involved) Does anyone have info for UK bitmain support? |
|
|
|
I'll offer 100btc + shipping
For 100 BTC i can give you the 64 hashratio asicminer gen 3 machines and the 16 bitmine coincraft desk. Sorry my offer is for the full 225TH/s, there's a lot of cleaning etc needed |
|
|
|
|
I'll offer 100btc + shipping
|
|
|
|
Hello. I have some info that may help regarding power supplies.
Corsair CX600M ____ Melted some plugs at the PSU connection when overclocked S1's to 393.75. I changed the plugs to a higher quality and it worked. I will run an S3+ at 225.
Corsair CX600 ______Runs overlocked S1's all day long with no problems. Also will easily run an S3+. Did not try overclocked S3+. Does not shut down easily from room temp.
Corsair CX500M _____Melted some plugs at the PSU connection running overclocked S1's. It will run an S3+ at 225. Did not try overclocked S3+.
Corsair CX500 ____ Will easily run overclocked S1's and S3+'s at 225.. They do shut down if room temp gets too hot.
So for your money if you can keep the room cool, and winter is coming, the CX500's are the best deal. $50 shipped from Amazon or New Egg everyday. And they will run the new L1's.
Also I have 12 S1's all underclocked to 250 and I run 2 on each Corsair cx500. About 350 watts max is all it pulls and the 2 units hash combined is 250-280gh.
Edit.... The M or Modular power supplies are NO BUENO, no matter what the wattage because the plug connection on the powers supply is a "weak spot" and creates resistance and heats up and melts the plug. No bueno.
What's your opinion on the Corsair RM1000 ? |
|
|
|
My S3 is running virtually silent now. l replaced the stock fan at the front (the end with the network connector) with a Corsair SP120 fan blowing in and removed the rear fan entirely. The fan is running at 1920 rpm with 48/48 temps, ambient is 23C.. S3 is overclocked to 225. Maybe won't work so good in hotter countries but here in Uk with summer over should be okay for the next 6 months
I see 48/48 as way to high as mine sitting out in the open run 40/38 with stock fans I would have to agree on 48/48 being too hot for my comfort,  These are in a 26.3C ambient room, apart from the highlighted one which is in my bedroom at 23.5c ambient, S3+ stock clocks/fans etc |
|
|
|
Repurpose the case and heatsinks for something maybe?  |
|
|
|
|
I wouldn't mind seeing something like this as I often like to look at domains in the marketplace. It's currently a PITA to find threads with the search functions related to domains (moved redirects etc).
|
|
|
|
 Sorry, don't know why I didn't include one in the first place  |
|
|
|
|
Teamspeak, although mumble is pretty decent too.
I don't use skype much these days unless I'm running it through a VM with a VPS due to IP leaks.
|
|
|
|
...snip...
Now I ponder why the tape is yellowishy... smog related?
I think it turns yellow due to the heat, I've seen it in other non mining appliances before. |
|
|
|
Anyone know how many Watts this S4 would be? Bitmain please tell us. Maybe they are updating the website No-one currently knows, awaiting an update on the site so join the F5 refreshing line  |
|
|
|
Why do guys enjoy fixing things so much, I will never understand It's rewarding to yourself  |
|
|
|
|
I'm selling my Butterfly Knife | Safari Mesh (well worn)
Looking for around 0.4btc
|
|
|
|
|
Fixing cars, fixing computers and recently twitch streaming.
|
|
|
|
|
Show Posts
