This will git s9 I guess but isn't the cable too short for rare fan ?

shipping from bitmain costs too much, any alternatives from ebay/amazon?

please help ASAP
I replaced the controler on S9 which I bought with bitmain. The hashing boards are working I checked them on another S9. When I powered it up it shows the hashing boards in status, first minute or so there are all 0s but also zero hashing speed, after couple minutes all of them are showing xxx. I tried 600 and 500 freq but still the same. What am I missing ?

update:
is there a chance that the miner isn't working with a faulty fan? even if I disconnect it?

is this a proper way to add worker name to eth?
I'm using -eworker command separately

There was 2 gigabyte RX480 and 1 Sapphire RX480, I replaced one gigabyte from another rig to be all identical cards and reinstalled drivers, I even tried older versions of miners but without any lack.
Now I came up with one idea which will help me identify the problem more detailed, I will try the Zec miner, if it still won't show the temps it means it's not about the miner but the system itself, if Zec miner will show temps then I have no idea what to do..

while all my cards are modded returning to factory rom solves 99.9% of problems so I'm out of options what to advise 


only one rig out of 81 isn't showing the temps, I'm confused. All the rigs are exactly same built wit same cards but only one refuses to show temps, any ideas why ?

try lower intensity -ethi with this command, make it -ethi 6 and then start lowering until you find the perfect spot.
On some of my rigs this settings helped, on some other ones I reverted to stock bios

Why not linux?
We are using these "benefits" until we can, until some regulations will affect it. After that I'm pretty sure we will be the nation with 98% of linux users

And forgot to mention, it did the trick, now I see chip temps in progress bar, thank you.








This is the last place I can ask, after googling for couple hours..
I want to give web monitoring access to some users, for this I will have to forward port to my micrserver which is sitting in the same LAN as S9-s.
As I see there are some options you can change via web monitoring.
Is there any way to restrict these and make it read only mode ? Update: I figured it out, now when I access web interface from global it only shows the stats and it's impossible to change anything, I think now it is more secure.
And is it possible to add multiple emails in receiver address ?
Are there any error definitions ? I can't figure out what Accept progress means (

Recently I came up with a strange thing when my rx480 8g cards were mining on different hashrates, I'm using 29Mhs rom since September and till this time everything was fine, but now couple 480s are mining at strange hasrates from 7-12 from 20-24. I tried almost every solution I could find on internet. The last thing was changing the bios back to original and 90% of cards are mining now at 24Mhs without any issues, but when I get back to 29Mhs bios they start jumping around again. I'm out of options what more to try, any suggestions ?

For me it is simple, installing win10 pro, entering key and after installation using KMS activator, after that it works without any problems. I don't know how the software policies and regulations work in your county so I can't actually advise you anything. Also the SSD sending idea is just a waste of money, if you decide to take a risk you can do it yourself.

Why do you want to spend money on postage and stuff ? You can activate it yourself with a key and KMS. I can send it to you if you want.
and the option @JaredKaragen advised is legit working option.
https://www.microsoft.com/en-us/software-download/windows10
this is the official link for downloading ISO

It's Georgia, even local microsoft office allows small and even medium businesses to use kms and stuff, if they will force us to buy copies we simply will switch to linux. As far as I know even some ggovernemtal institutions are using havked kasperski and windows.

It left like 400mb or less, let's see what it will do tonight.

what about free linux distros like ubuntu or mint?
Does anyone have any experience mining with these distros in large farms? I need more stability

I actually managed somehow to install on one rig (all rigs are 3GPU per rig) with 16gb SSD, max pagefile I could give was 4000MB and atm it is mining, but I'm pretty sure it will stop soon.. There are some strange win7 versions installed and I forgot the golden rule :/ if it works, leave. So I will start upgrading 32gb+ rigs with win 10, there's no other way I guess..
I was also trying to make smaller version of 10 with NTlite, but with no luck..

Although it's possible to setup port forwarding (redirects), it's also a security risk. At least if you enable full API access on the miners, that would allow for changing pool and more. It's more secure to setup some kind of VPN solution. I don't know what your router supports, but an option is always to have a PC on the site running VPN software like Hamachi LogMeIn, and then have Awesome Miner running at your location. As you point out, you can also run Awesome Miner directly on this PC on the site and connect via Remote Desktop, or use the Awesome Miner built-in web interface to monitor from your location.

I'm assuming it's Antminers for the moment, because you ask about hashing board temperaturs. Please correct me if I'm wrong. You can actually configure the Progress field in the Miner tab to display Antminer chip temperature. See the last example on this page: http://www.awesomeminer.com/help/customizefield.aspx
[/quote]
you are right, they are all S9s, so far my future solution is to bring at the farm my old pc with awesome miner installed on it, disable full api access to miners and use mailing and web interface for monitoring. I have mikrotik there with vpn access but I prefer to have a pc there. That will give me maximum security, I won't even forward RDP just connect to vpn and use RDP that way. One more question, will I be able to set for web monitoring multiple users and passwords if I upgrade my awesomeminer of course?

Thanks for reply, can't wait to have answers on those questions as well, I already bought premium edition and want to upgrade in nearest future.

Greetings, It's been 10+ hrs I'm sitting in the farm and searching for options to somehow fit windows 10 on 16GB SSD.
I know that 16gb isn't enough and why I even bought it ? It wasn't me..
Here is the list of ssd-s I have currently on my farm:
22x16gb
25x32gb
25x120gb
and couple 64s and 40s
I was on vacation and planning to update from windows 7 to 10 and now my plan isn't working as I wanted it to.
The thing is that I can actually upgrade 32 and + SSDs to 10 but I can't do it with 16gb.
I was searching to all over the net for smaller versions of 10, I even downloaded and installed some, but it isn't working as I want it to.
Any ideas or suggestions about what system to use, atm there are 10s and 7s as well...
How can I manage to install and run correctly without any issues windows 10 on 16gb SSD?
I know that it will be better to go and buy some new ssd-s but..

devs willing to answer our questions ?
soft is good so far but no any kind of support!

I can confirm this considering my rl friends experience. They are scam