I guess I'll offer 16 BTC for (B) shipped to Australia.
Depending on how sales etc go, I might just buy 2.
QIVX has retracted his offer |
|
|
|
I can`t connect to my rig via ssh atm, but i remembder 1 each 10-15sec. Seccond/third thing is lots of rejects(could be gpumax problem) and lots of HW .... I just moved somme jy fpga into new case. Alle in one with mitx atom. I was compiling cgminer by myself Installed all. But i got still error -9  Cgminer can see 4 (all conected) quads, but gives me error nr 9 [2012-06-02 14:09:48] Started cgminer 2.4.1
[2012-06-02 14:09:48] Ztex check device: Failed to read ztex descriptor with err -9
[2012-06-02 14:09:48] prepare device: -9
[2012-06-02 14:09:48] Found 0 ztex board(s) All devices disabled, cannot mine!
That's the first I see that error. It's a usb read pipe error, so maybe a permissions problem? I've never tested this on an atom so I don't know if there are other pitfalls to worry about. |
|
|
|
Any advise ? [2012-06-01 12:59:02] Accepted 72be84e0.b2f9da80 ZTX 0 pool 0
[2012-06-01 12:59:12] Ztex check device: Failed to set fpga with err -7
[2012-06-01 12:59:26] Accepted cfb483d8.174b1bb3 ZTX 1 pool 0
What does it means to my quad ?  It means there was a timeout trying to send the 'set fpga' command to your quad. It should not matter if it is an isolated incident, are you seeing more of those? |
|
|
|
|
I'm going to close a) b) and c) tomorrow. If any of the buyers wishes to retract their offer now is the time to act. Also, I assume you'll be paying first, so if anyone needs escrow get in touch so we can arrange for it.
I might only be able to hit the post office on Monday so there is a little time still to discuss details, but if no new offer is done in, say, 12 hours, I'll be committing to the offers placed.
I'll let e) and f) open for a little while longer but will close it this weekend unless there's some bidding action going on.
|
|
|
|
Care to share where this would be sent to? Just the region is fine.
I'm in the UK, Worcestershire. I've got a feeling we might even be in the same country  Wouldn't mind adding a small extra for postage if needed. Pete We are not, but it's close enough Thanks for the offer, it is the best one for these items even with shipping included. |
|
|
|
Offering 14BTC for e) or f) or 26BTC for BOTH
Really need a waterblock for 5970, XSPC would match my other waterblocks nicely!
Pete
Care to share where this would be sent to? Just the region is fine. |
|
|
|
|
Well, I replied to hashking by PM but for everyone's benefit, I am not as advanced as I hoped to be by now, a mix of bad initial decisions and lack of work day time to dedicate to this. I do have some communication with the board already implemented and it just needs time/work. I'll try very hard to push this into something I can share this weekend.
|
|
|
|
|
Well, it seems the offers are not exactly pouring, so lets give this 24h and close the already existing offers if nothing new comes along?
I was half hoping someone would make a fair offer for the whole thing but I like all the individual offers made so far. Regarding payment, you can either trust me and send first or we can agree on a member everyone trusts to hold the coins until good reception of the goods, just let me know (this goes for everyone, of course).
|
|
|
|
I switched back to BTCminer. Thanks for your help but I already deleted Zadig  It was 4x boards, no y involved. Just wanted to know if I missed something important. I wonder where I got the y from... oh well. In that case, the capability missing was actually a good sign, so unless you try again and provide the logs I have no clue to why it hangs. |
|
|
|
I've had a few offers by PM, and I just wanted to ask everyone to place offers here. If you want to do a blind offer so as to prevent being outbid that is fine, but do please state what you are interested on here so: - Other's know what is being negotiated - (more important) the thread gets bumped up - (most important) other members have a chance of seeing who we are and warn me and you if either of us is a known scammer or at least if we should be double safe. Thanks! [EDIT] - Current offers: a) tccd - 16 btc (EU) [received] b) - c) Vwlopez3 - 18 btc (US) [sent] d) - e) piit79 - 25 btc (with f) (UK) [sent] f) piit79 [sent] g) - |
|
|
|
What about Win7 32 ? Tried it today, downloaded Zadig and installed the WinUSB drivers. Was working fine, the boards showed up as ZTEX Modules. When i started cgminer it froze and said something like "capability missing 0 7"... what did i wrong ? I also use a BitForce single and 2 GPUs on this machine.
Capability 0 7 is multi fpga, and that is normal if you also have any 1.15x connected. I never had a cgminer freeze with fpgas, but I also never had an 1.15y to play with so I'll need more details to be able to add anything useful to this issue. Can you start in text mode and debug (-T -D) and send me the full output until the freeze? |
|
|
|
anyone have "y" board working with new BFG/CG miner ?? i`m using built version, as all of you know i was using -S auto and few -S 1/2/3 commands, but nothink seems to work any experiences ?? I need cgminer to hook "y" up with gpumax. Which OS are you using? I had some problems to figure correct rights, but that was under Linux. OS needs libusb-1.0 and no extra flag is required (no -S). What does 'built version' mean? If you are building from source don't forget --enable-ztex. |
|
|
|
Thanks, got all the missing payments. |
|
|
|
Ok, so I checked the transactions and there was one which I actually won -> a96a3cc6284df89c4d670722e6c2705b7d3709673be8e7207c53e02f35220d45 Thing is, the pay out address, it is not mine. I'm using the bitcoin-qt client at version 0.6.2.2, so I'm pretty sure that's not the problem. Where did satoshidice come up with the address? It is not mentioned in the bet tx at all. So, all in all, I placed 7 bets and received 4 payouts for losing, so I'm missing 2 loosing payouts and one win. What should I do? Stop betting? |
|
|
|
Some images: a) http://imgur.com/a/Nn5m1#0b) http://imgur.com/a/0bcDd#0c) http://imgur.com/a/qa11K#0d) http://imgur.com/a/9Ju8j#0e) http://imgur.com/a/Ar7Sa#0f) http://imgur.com/a/BqQ1S#0g) http://imgur.com/8PgNna) and b) are EK blocks complete with screws and spacers c) is EK too, with backplate, with screws and spacers (for mounting with backplate, the screws do no allow mounting with the original BP I believe). d) is the same as c), except I lost the EK backplate screws. I do have the normal BP screws as seen in some of the pictures, but I only have 2 of the 13 spacers. e) and f) are XSPC blocks, complete with screws and washers. g) is most of what I have in terms of fittings and such. There is more but I couldn't find it promptly and gave up. Shipping from Europe, open to all offers (but I reserve the right to not sell if it is just not worth it) and I only take BTC. Will do escrow if needed, obviously. Side note: I also have 3 2x 5970 bare naked (no heatsink) that were used with some of the above blocks, and I have the original heatsinks for them but not the screws to join the two I will also take offers for those but what I'd really appreciate was if someone with broken 5970s would sell me the screws so I could properly test the cards before selling. |
|
|
|
Sorry if my not reading the last 11 pages means I'm repeating questions but I made 7 bets yesterday and receive only 4 transactions back (all 4 lost bets). I assumed that I had one the others and that it would just take a little more time to process winnings (hey, one can hope). But now, 10 hours after the fact, I still see no payment tx. Is this normal? |
|
|
|
Awwww, that's so disappointing (that she's not a race horse, not the race result). If I keep my shares (and maybe buy some more  ) will they count towards a new horse you buy? Is that in the plans? |
|
|
|
|
Hey,
I'm mining on the 3220 (but developed originally on the 3420) with openwrt with great success. I did, however, build the OS from scratch so I could have all dependencies built in.
If you are using the plain vanilla openwrt you will need to install a few things, though I found I didn't have enough space for everything unless I either built one from scratch or used usb storage for the installed modules. I don't have a clear memory of what I needed but I'll be happy to share my kernel .config with you, send me your email on a PM. I can also send you the full firmware file, if you want. That one will most certainly run the cgminer binary compiled for that platform (which I can also share) but has a few odd customizations.
You don't need any specific Cypress drivers, just the normal usb-ohci driver.
|
|
|
|
Who is managing the top address to which I sent the 10 btc and what is the process to get these back?
Me. Have you heard from shakaru in the last two weeks? Do you need copies of my PMs to keep tabs on the event log? I'm in no hurry at all and deep down I still hope that shakaru sends me a tracking number, but I'm not seeing how that might happen given his track record so far. |
|
|
|
|
Show Posts
