still waiting on any kind of payment from 2 different computer/wallets.
been mining since launch.
and yes i have shut off the miner and submitted a pay request.
ditto |
|
|
|
I've submitted for payment from 3 rigs. So far only 1 rig has been confirmed, see image above, the other two rigs = zip.
I'll wait 60 more minutes.
After rereading the OP payouts are apparently only once a day. I stopped mining to test payout ~30 mins ago and still haven't been paid however. How long did it take to show up in wallet? That's per wallet, right? I have 4 rigs each have their own wallet and address. |
|
|
|
|
So, Dev, how come only one of my wallets from one rig been given a confirmation of payment? The other two got zip. I have closed and restarted the wallets, too.
|
|
|
|
|
I've submitted for payment from 3 rigs. So far only 1 rig has been confirmed, see image above, the other two rigs = zip.
I'll wait 60 more minutes.
|
|
|
|
this smells like a huge hash stealing scam.
no coins paid out so far, no solo mining, must use their crappy software to mine.
NO COINS YET IN ANYONES WALLETS!!!
ALL WE ARE DOING IS CREATING A BIG POOL OF FREE HASHES FOR THE DEV.
IM OUTTA HERE. HAVE FUN WITH YOUR SCAM
 print screen windows |
|
|
|
|
Two of my rigs say Total Hashrate 523000, the other two say 41004.
Is that right?
|
|
|
|
|
If any of you have been experiencing a problem with these new sgminers running under 14.6beta let me give you an example of what happened to me: I have 4 rigs of 7970s and 280xs. 3 rigs were fine running x11-x15 under the new AMD beta drivers. The other one would run for anywhere from 20 minutes to 2 hours and die with a BSOD no matter what engine speed, voltage, or memory speed I used. After days of troubleshooting it finally came down to doing a complete uninstall of all AMD software, reinstall 14.6 and remove GPU devices and drivers and reinstalling the device drivers for the GPUs. That finally fixed it. Even though I treated all 4 rigs the same, sometimes something glitches out. I hope this saves someone somewhere some time.
|
|
|
|
How to activate the Logging into a File? Sometimes SGMiner just close without giving an Information why. Would like to Log everything to see what happen.
The way I log activity is to start my miners with a batch file: setx GPU_MAX_ALLOC_PERCENT 100
setx GPU_USE_SYNC_OBJECTS 1
del *.bin
sgminer 2>logfile.txt --config nicehashx15.conf the "sgminer 2>logfile.txt" will write the activity to the same directory as the sgminer. but lately my miners have been shutting down or freezing or rebooting without a clue left in the logfile. Something's not right with the x15 config. I just can't figure it out. |
|
|
|
sgminer freezes on quit for me on Windows 7 with 280x cards. Once it is frozen, I can't even kill the process, I have to do a hard reset.
I'm still on Catalyst 14.1, should I update it?
Using the binary from the rar linked in OP
I will second this and I already have the 14.6 beta drivers. |
|
|
|
I still can't get this to run for more than an hour without freezing up my computer. I have windows 7 pro, 13.12 drivers, gigabyte r9 270, and powercolor r9280x. I've tried tweaking my settings, but I haven't had any luck.
Try bumping up to 14.6 beta drivers if you can. This worked for me. I used the 06162014 updated x11mod.cl and x13mod.cl files put them in the kernel folder and noticed no change in hashrate. So then I updated to the 14.6 beta AMD drivers from the 13.12 version and immediately started getting x11 above 4.1MH for AMD HD 7970s and R9 280xs. A very important distinction between the two has to do with power consumption. Before my two rigs of 4 R9 280s with the 13.12 drivers each consumed about 580 watts and my two rigs of HD 7970 consumed about 690 watts. Now they are all at about 700 watts. So an increase of about 25% hashrate for an increase of about 20% of power consumption for the R9 280xs. Interestingly, there was NO CHANGE in power consumption with the HD 7970s for an increase of over 20% in hashrate. Very stable running Sapphire HD 7970s at 1050 engine, 1500 memory, 1.117 voltage, Intensity 19, worksize 128 XFX R9280xs at 1000 engine, 1500 memory, 1.117 voltage, Intensity 19, worksize 128. |
|
|
|
what is IPO mean
initial ponzi offering +2 |
|
|
|
Why would you ever get involved in an IPO ? especially for this? goddamn people are fools.
what is ipo please IPO is where the coin creator ask you for money so you can supposedly get some coins and then quickly where the OP runs off with the btc and never heard from again.  +1 |
|
|
|
wallet!!!!
Why do you care about a wallet? Block Reward:
0-250 Block : zero Solo mining for nothing? |
|
|
|
Yeah, he could be gone in a flash. |
|
|
|
Wallets Available
Awesome, can we have RPCport, roaming folder and conf name please. At launch  Ok Just to give you a heads up, the latest version of chrome won't allow you to keep the wallet as it detects it as malicious. Really? Its in a zip file and chrome does not mark ANYTHING in a zip as malicious. Never heard of it before Anyway, do not worry. There is nothing malicious in there, you can check it on virus total once we release the passwords. Zip file is password protected. Cannot unzip or install. That's the whole idea. You can download the file now instead of backing up the file server at launch. This way everyone gets the zip file ready to unlock at the same time. The password will be released at launch. |
|
|
|
R290X owners on X11,
Please what's the best hash rate you achieved ? On my behalf it's 4.1 mH, I couldn't get more hashrate after lots of tweaking.. I can see some 290 none X owners achieved 4 mH.
Is it possible to break that record? Please share your config file settings maybe we can push those vgas..
Yeah, same here. Never above 4.1 |
|
|
|
XFX R9 280x's x 4: gets 2.3 MH/s at engine 1000, memory 1500, undervolted to 1.117 ,
"intensity" : "19,19,19,19",
"vector" : "1,1,1,1",
"worksize" : "128,128,128,128",
"kernel" : "x13mod,x13mod,x13mod,x13mod",
"lookup-gap" : "2,2,2,2",
"thread-concurrency" : "8192,8192,8192,8192",
"failover-only" : true,
"gpu-engine" : "1000,1000,1000,1000",
"gpu-fan" : "0-85,0-85,0-85,0-85",
"gpu-memclock" : "1500,1500,1500,1500",
"gpu-memdiff" : "0,0,0,0",
"gpu-powertune" : "0,0,0,0",
"gpu-reorder" : true,
"temp-cutoff" : "90,90,90,90",
"temp-overheat" : "85,85,85,85",
"temp-target" : "75,75,75,75",
"api-mcast-port" : "4028",
"api-port" : "4028",
"auto-fan" : true,
"expiry" : "1",
"gpu-dyninterval" : "7",
"gpu-platform" : "0",
"gpu-threads" : "2",
"hotplug" : "5",
"log" : "5",
"no-pool-disable" : true,
"no-submit-stale" : false,
"queue" : "0",
"scan-time" : "1",
"scrypt" : true,
"temp-hysteresis" : "3",
"tcp-keepalive" : "30",
"shares" : "0",
"kernel-path" : "/usr/local/bin" |
|
|
|
|
Show Posts
