Indeed - and I'm the one who spends most of the day looking at it  * kano restarts the pool Yeah, as a pool op that must be tough at times (also for miners on the pool) ... but we all know luck% might look mighty different in a couple of weeks, averages will come good and settle down ... just a pain in the *ass whilst we wait ...  Although it's not getting better as people are pulling their miners off the pool again.  I try to think about how much better my payout is going to be when we bust a few quick blocks now that my % is higher  |
|
|
|
|
I don't care either way. Consider thread locked. I will pm you both with needed info tomorrow.
Like I said on the controller. I only messed with it for a few minutes, no guarantees fellas.
|
|
|
|
|
Have 2 pms. hash boards don't have heatsinks attached but I think I still have them if you want them. I will ship anywhere, you pay for the label and email it to me. I accept 0 coin.
|
|
|
|
|
These were volt modded in a stack, moved and now troublesome. It appears from briefly messing with it that the control boards are screwy. One makes 2 bords hash np, others throw out xs on the same boards and some report nothing. I don't have time to go through it. So, that being said, these are free to who ever wants to provide a label. Condition is as is obviously. Shipping from 92704.
I will get shipping weight tomorrow, a flat rate box should It.
On mobile...
|
|
|
|
your payouts should go up
Just turned all 12ths of my miners OFF. In the last month I spent 300.00 usd more in power than what I made in BTC.
Good luck to all and hope to join in again soon.
Sorry to hear that you are all out, but thanks for the ants. They have a good home  |
|
|
|
Another successful escrow using OGNasty. |
|
|
|
1 more TH thrown this way...  |
|
|
|
|
I PM'd my offer a few days ago. A deal was pending. I drop my offer by $20 shipped with escrow.
|
|
|
|
|
Unit received in perfect working order, a pleasure doing business with you.
|
|
|
|
I am having some issues with my SP20 and hoping someone can help me out. I know it is a networking issue, but only my SP20 doesn't want to cooperate so I am posting here. So here it goes. I have had a Netgear JFS516 Switch set up in a closet space running 1 SP20 and 2 Ant S3's which is connected to my D-Link wifi router without any issues. I recently added a Netgear FS524 Switch which is fed from the same router into a different closet space. The SP20 now refuses to run, while the ants are still happy working away. There is no IP conflict from the newly added hardware connect to the new switch.
Things I have tried:
Disconnect the newly added switch then restart the old one.
Connect the SP20 to the newly added switch.
Connect the SP20 directly to the D-Link router.
(in all situations I get 6 yellow blinks and fan wind ups/downs)
When this first happened I brought the unit home and it refused to work on my home network (at that time there was no LED activity at both locations), did a restore on it, updated firmware and it ran fine all night. Took it back and it still doesn't want to run. Brought it home again tonight and it fired right up. I really don't want to drag this thing home again tomorrow and get that look from my wife which I am sure some of you are familiar with and needs no explanation.
Thanks for reading! Any and all help is greatly appreciated.
If you can help me fix this problem, I will have the unit mine for you for 1 week as a thanks. (1.5TH)
Are you configuring the LAN on the SP20 manually or via DHCP? DHCP. |
|
|
|
|
I am having some issues with my SP20 and hoping someone can help me out. I know it is a networking issue, but only my SP20 doesn't want to cooperate so I am posting here. So here it goes. I have had a Netgear JFS516 Switch set up in a closet space running 1 SP20 and 2 Ant S3's which is connected to my D-Link wifi router without any issues. I recently added a Netgear FS524 Switch which is fed from the same router into a different closet space. The SP20 now refuses to run, while the ants are still happy working away. There is no IP conflict from the newly added hardware connect to the new switch.
Things I have tried:
Disconnect the newly added switch then restart the old one.
Connect the SP20 to the newly added switch.
Connect the SP20 directly to the D-Link router.
(in all situations I get 6 yellow blinks and fan wind ups/downs)
When this first happened I brought the unit home and it refused to work on my home network (at that time there was no LED activity at both locations), did a restore on it, updated firmware and it ran fine all night. Took it back and it still doesn't want to run. Brought it home again tonight and it fired right up. I really don't want to drag this thing home again tomorrow and get that look from my wife which I am sure some of you are familiar with and needs no explanation.
Thanks for reading! Any and all help is greatly appreciated.
If you can help me fix this problem, I will have the unit mine for you for 1 week as a thanks. (1.5TH)
|
|
|
|
|
I am having some issues with my SP20 and hoping someone can help me out. I know it is a networking issue, but only my SP20 doesn't want to cooperate so I am posting here. So here it goes. I have had a Netgear JFS516 Switch set up in a closet space running 1 SP20 and 2 Ant S3's which is connected to my D-Link wifi router without any issues. I recently added a Netgear FS524 Switch which is fed from the same router into a different closet space. The SP20 now refuses to run, while the ants are still happy working away. There is no IP conflict from the newly added hardware connect to the new switch.
Things I have tried:
Disconnect the newly added switch then restart the old one.
Connect the SP20 to the newly added switch.
Connect the SP20 directly to the D-Link router.
(in all situations I get 6 yellow blinks and fan wind ups/downs)
When this first happened I brought the unit home and it refused to work on my home network (at that time there was no LED activity at both locations), did a restore on it, updated firmware and it ran fine all night. Took it back and it still doesn't want to run. Brought it home again tonight and it fired right up. I really don't want to drag this thing home again tomorrow and get that look from my wife which I am sure some of you are familiar with and needs no explanation.
Thanks for reading! Any and all help is greatly appreciated.
If you can help me fix this problem, I will have the unit mine for you for 1 week as a thanks. (1.5TH)
|
|
|
|
YAY! All workers connected! |
|
|
|
... Could one of my IP's have been banned from the pool and website? I haven't been able to access the website from home and my miners here are rolled over while my gear that is offsite is plugging away fine.  I randomly ban stuff that is either doing a large blockchain download from bitcoind or that is repeatedly getting failures on the console ... and other reasons PM me your IP and I'll check why. My manual ban script ... I add a comment every time also why I did. Also, if you use an IP address hiding service and someone else uses it also and (fails) to hack at the pool, that IP can be banned also and I then wont unban it. you doing an ip range? or just selected ips? (just wondering if you're covering dynamic PIs, I've been on the wrong side of a stick when someone else has been banned off a site and my IP was in the same range) You're unlikely to be hit unless you did something ... What was the verdict? I finally have 4.2TH up and running and half of it is on failover.  |
|
|
|
Could one of my IP's have been banned from the pool and website? I haven't been able to access the website from home and my miners here are rolled over while my gear that is offsite is plugging away fine. I randomly ban stuff that is either doing a large blockchain download from bitcoind or that is repeatedly getting failures on the console ... and other reasons PM me your IP and I'll check why. My manual ban script ... I add a comment every time also why I did. Also, if you use an IP address hiding service and someone else uses it also and (fails) to hack at the pool, that IP can be banned also and I then wont unban it. I don't think I did anything to be on the naughty list lol. |
|
|
|
Could one of my IP's have been banned from the pool and website? I haven't been able to access the website from home and my miners here are rolled over while my gear that is offsite is plugging away fine. |
|
|
|
|
Tracking received will update.
|
|
|
|
|
I am at my wits end. I had to move some stuff around, turned off PSU's moved a SP20 and now it won't run. I tried making a recovery SD and a Boot SD, none of which work.
Is there anything else I can try?
|
|
|
|
|
Used OgNasty's Escrow service for 1.75 BTC. Quick responses and fast release of funds.
|
|
|
|
|
Happy Birthday Nicehash! For 1 year your team has accomplished a lot.
|
|
|
|
|
Show Posts
