2 Claymore
Just tried "e" button to switch to pool from epools.txt list without restarting the whole miner. Very convinient! But when I switch to pool from epools.txt it treats it as Failover pool and switches back to main pool after some time (to the pool from starting command line the miner was run). Is there a way to manually switch to the pool and it will be the main pool during this miner session and others become Failover pools?
|
|
|
not good results at all. my power color red dragon rx480 8mb is doing 30mhs@70w (gpu-z), sapphire ref-like rx470 is doing 28.8@73w (gpu-z) - ethereum only mode
did you set the timings straps to 2000 ? or just OC ? or both of them custom timings (but public available, not private, private even better I think) rx480 is clocked 1170/2050, rx470 1100/1980. voltage 0.88-0.9. Very stable and happy )) and the queen - sapphire nitro+ 480 8gb samsung 1170/2200@0.88 @ 80w gpu-z 31.5mhs eth
|
|
|
Hello,
I will buy 6 cards for a new rig, and don't know i buy Rx 480/470/580/570 card, what is the best for eth Mining?
Any Tipps.....
Best Regards from Germany Willi
i just know RX470 better than all for eth mining, low watt and got 29Mh/s.. the only 470s i have seen get 29 mhs are the saphire nitros with samsung 8gb sapphire ref-like 470 4gb hynix is doing 29mhs with custom timings. Even in dual-mode. (29eth+700dcr), 70w gpu-z in single mode, 90w gpu-z dual mode
|
|
|
Can anyone test gtx1080 with latest tpruvot ccminer 2.0 on neoscrypt. Please!
|
|
|
What miner... use EWBF's and fiddle with your Power Target, Base clock offset and memory offset. Different cards and brands will do better at different settings. Like turn power target to 80%, +60 on base clock and +390 memory clock if micron (higher if samsung).
my palits work like: 1. Palit Superjet Stream, Samsung, +154 clock, +900 mem, 80%tdp, 490sols 2. Palit Gamerock, Micron, +199 clock, +700 mem, 80%tdp, 470 sols. Stock bioses. Both have 170watt TDP built in bios, but SJS has more room for high clocking. It can do 520 sols with 114%tdp but this is crazy ))
|
|
|
With 2 gtx1070 i have $8 on ordinary pool with free miner with well-known coin. Why the hell I must mess with private shit? ))
Wich coin? not nexus ))
|
|
|
2 bensam & Amph O totally agree that $4 per cards isn't that great but I don't want to mess with private/buggy miners, shitty/scammy exchanges, etc.
|
|
|
How's the nexus profitability for the 1070s right now?
With 2 gtx 1070's you should find a block every day and sometimes 2 blocks. A block is ($4.5) (Sp-mod #6) With 2 gtx1070 i have $8 on ordinary pool with free miner with well-known coin. Why the hell I must mess with private shit? ))
|
|
|
v9.2 slightly reduced performance. dcri 23 => same DCR yet ~2% lower eth rate (2-4W less consumption on 470)
Definitely slower, why is this happening? you should decrease dcri 1-2 points to get eth speed back
|
|
|
not good results at all. my power color red dragon rx480 8mb is doing 30mhs@70w (gpu-z), sapphire ref-like rx470 is doing 28.8@73w (gpu-z) - ethereum only mode
|
|
|
im using claymore 9.1 for ethereum but only 2148 mb are in use my vga card have 4 gb Thanks Almir Dear Friends
I own an RX480! But my RX480 have 4GB
But only using 2gb ! Does Claymore use only 2GB of memory?
Is there any way to use the 4gb and improve the hashrate?
Thanks Almir
What claymore are you using? he has for: ZEC XMR ETH and how do you know it does 2gb not all 4gb? consider selling your 4gb card and buying 2gb to mine etherium with Claymore miner )))))
|
|
|
Since your revision of my source has nothing to offer on the majority of the gpus, <edit>even 6 months after the release</edit> (except the 1.7% fee you take in your pocket). Can we see the source code please?
Hi! Can I have your btc address for donation? Cannot find it on readme at github. Better to put it here. Your miner is absolutely the best in all algos I tested!
|
|
|
I have profiled with the same intensity. Run 2 versions on a pool. Mine is faster
well, maybe for 1060 3gb, I have no such card so cannot check. But the Queen - gtx1070 was always your weakspot ))
|
|
|
currently there is status quo on ZEC miners market. EWBF's for Pascal is a little faster then Nicehash's Excavator and lot more efficient then Claymore's on AMD. There is no need for further speed rush. If Nicehash or Claymore will come with new faster version then, sure, EWBF will take out the rabbit from the hat ))
|
|
|
Because it's 6% faster and free download. Try it
are you kidding? 311 free miner and 312-313 yours with fee starting immediately ... same afterburner settings ... bullshit )) My kernel need more power. I tested on the 1060 3gb. Just noticed def intensity 29 for your miner, put it to free miner and received the same 312-313mhs. You are trying to take fee for compiling others work )) You have no "your kernel"
|
|
|
Because it's 6% faster and free download. Try it
are you kidding? 311 free miner and 312-313 yours with fee starting immediately ... same afterburner settings ... bullshit )) P.S. And with "nonce was already sent bug" ))))))))))))))))))
|
|
|
I'm getting 310 lbry with 127watt (nv-smi) with free opensourced miner, gtx1070. What is your result with your closed sourced fee miner? What should I pay for?
|
|
|
2 sp What is your speed: skein, gtx1070?
|
|
|
I have lived in the Berkeley Hills and used to work in the Silicon Valley..
Now I sell private kernels for pocket money...
and drink to much ))
|
|
|
|