|
Is everything ok with yobit market for this coin?
|
|
|
|
After 9 hours on MasterMining, I'm on track to be at 206/day. Almost exactly as WhatToMine predicts. Thank you for helping me to find the problem!
Cheers, thats really strange though, never had this kind of problem on mph. Maybe drop the admin an email explaining the problem. |
|
|
|
WTM's rewards estimate is still running about double what the actual reward is (at least for me) re: XVG-Scrypt.
I average 121 coins/day with a low of 108 and a high of 168. The vast majority of days are between 110 and 132.
MiningPoolHub's calculated hashrate for me is consistent with my miner's nominal rate (695 mh/s).
WTM's rewards estimate for my hashrate is 227.
MiningPoolHub reports a network difficulty of ~78K and so does WTM, at the moment.
Again, I'm not complaining; only trying to understand and perhaps supply you with information that might help you.
JC
Indeed mph has really negative luck on xvg-scrypt. https://verge-scrypt.miningpoolhub.com/index.php?page=statistics&action=blocksNeed to check if this is something wrong chain-wide or only happens on this pool. EDIT: Havent used this pool, but displayed luck seems much better https://xvg.mastermining.net/index.php?page=statistics&action=blocks@tamerlanST Not possible |
|
|
|
I was curious to know what does the WhatToMine calculator status "Active (Not Listed)" mean exactly. If a coin is not listed, does this mean that the information in the calculator is not up to date? How is "Active (Not Listed)" differ from "Active" or "No available stats(lagging)"?
Thanks.
Basically it means that its not included on the gpu / asic lists, but reasons can be different. Its algo may not be supported by the list, for example Xevan. Sometimes there are temp network / exchange issues. Lagging means that stats havent been updated for more than one hour. No available stats is coming in red and is the reason for coin being inactive. |
|
|
|
Ok. Now I need request details of certain money as follows: www.whattomine.com/coins/151.json?hr=<my_hashrate_for_ethash>&p=<power_in_mode_of_mining_ethash>&.... But common info, which I can request from your site like www.whattomine.com/coins.json?utf8=...&factor[eth_hr]=<my_hashrate_for_ethash>&factor[eth_p]=<power_in_mode_of_mining_ethash>..... contains whole necessary parameters for all algo! Please, parse parameters string for coins.json request and filter only needed for certain coin (algo) (You can get hashrate not from hr=, but from factor[eth_hr]). Sorry for my English. This cannot be easily done. Current json simplistic nature operates only because the interface is unified with UI. @sureyea Thanks! @johncroc1 Multi-algo coins are tricky to estimate rewards for. Its possible that pool had bad luck / orphans. In general sha and scrypt parts should be fine though. I think there was a network issue on verge few days ago, any chance it got better recently? Still waiting for my asic, can test the rewards after I have it. @Eneen Thanks for the heads up, indeed the explorer forked, switched for a backup for now. @cptcherry 1) and 2) Honestly never played with excel and json 3) Those attributes are not relevant from comparison-list point of view. You can still calculate them from btc_revenue or call a single-coin endpoint to calculate it for you. |
|
|
|
Why? What surprises you?
I dont understand what you need or what `one additional method of parameters coding` might be. |
|
|
|
VIVO is listing around double the actual rewards.
I found out the hard way
Indeed official explorer was giving invalid data being on a different fork. Perfect timing that this happened during price pump... |
|
|
|
Supported market required first. @BashOrgRu Honestly not sure what are you requesting here. @Sammy2000 Thats cause you acted on 24h rewards going up in BTC as a result of the price pump, but didnt check the rising difficulty. You cannot expect to earn the same amount of coins after the price pump. @cptcherry You need to pass your values to json url, the same as you provide them to the UI. You can use the same url, just add `coins .json?` |
|
|
|
And down again  |
|
|
|
Thanks for the convenient service. Add please the BTCZ coin, its mining complexity is not high now and it is profitable to mine.
The coin was added ages ago, but you wont see it on the list until community adds at least one supported exchange. And yes ccex was removed. |
|
|
|
@fredeq
Is there a Json query to extract all the hardware profiles for each algo for both ASIC and GPU ?
Nothing like that present. The adapt to hardware feature is considered UI only |
|
|
|
Hi fredeq
Thank you so much for your website.
Just wondering, is there a guide on what all your column headings mean?
If you can point me to it, then I can read and understand.
Otherwise, I had a few questions:
what is the base of the 'est rewards'? Is this in BTC, or the coin in question?
Wouldn't it make sense to make this standardised?
Also
What does Rev. BTC vs Rev. 24h vs Rev $ vs Profit (under rev $ in bold)
Thanks
No guide yet though I am starting to feel the need to write it Est rewards are always in the coin in the row, rev BTC is rewards in BTC and then next column in $. Rev24h uses 24h averages, same as EST rewards 24h. Rev$ / profit$ can be set to current / averages in option form. |
|
|
|
Great site. It would be nice to have a way to filter out specific algos/coins, especially NiceHash.
You can disable algos by clicking on the name, nothing for nicehash yet. @Juniormkl Requires market supported by wtm BTG was lagging for more than a day, meaning the stats were not correct. Official block explorer is down, was supposed to go up today, but well... Will relist once its up. |
|
|
|
Hello,
Total newb here. I wanted to make a use of my home rig, to see how much can it mine. It's a basic home PC with GTX 1070 in it. Based on the calculations on whattomine I could see the following (Seems like GoByte was the most profitable, so i did the calculations based on that):
Hash rate: 1000
Power: 450
Cost: 0.1
Block Reward: 7.5
Pool fee: 0.9
Hardware cost: 0
Difficulty: 1246.822
Exchange rate: 0.00290053
BTC Value: 10822.0
Based on above I could see the following (please note that when i calculated those values 12 days ago, they were much more promising):
Per Pool Fee Est. Rewards
Hour 0.000043 0.004747
Day 0.001035 0.113919
Week 0.007242 0.797433
Accoring to above, I'm supose to mine 0.113919 GBX per day. Since I'm mining for 12 days now, it suposed to be ~1.36 GBX. According to my wallet, with 12days uptime i gathered 1.07271060 GBX. Quite a difference.
Any idea what did i misscalculated? What did i do wrong with above calculation? I'm checking altminer.net every few hours and it seems like im at 1.0 Mh/s all the time.,
Thanks.
Keep in mind that wtm shows what you could have mined in last 24h, it cannot predict future rewards. Its normal to receive lowered rewards when difficulty goes up. @Saphire Not possible right now @nitro3 Already received many requests for this coin. Researching. |
|
|
|
is there any way to push templated data for GPU graphics? to have the correct value ? (i have seen cookie in my browser)
is there any documentation about the value ?
cause it's difficultu to understand some key without this
maybe should be add in first page ?
No way to do this. Use given values or your exact ones from rigs (recommended) |
|
|
|
Sorry to ask such a stupid question..
But what pools are being used to determine the profitability of each coin?
I own a few S9s and would like mine Universal Currency but cant seem to find a pool that pays out as good as what is projected on Whattomine.
Thank you in advance!
Mathematic formula is used to determine the rewards of each coin. In other words most coins are not tested with direct mining. Make sure you check pool luck and include it in solo calculations. Whats the exact difference for UNIT? |
|
|
|
|
Show Posts
