Anyhow, enjoy while it lasts.
Greetings!
Care to explain why your average readings are close to "usual" 470 values of 26.xx? Also HW? If you look in the top right corner, you'll see that it was only running for 2 minutes, the avarage speeds were only at 26+.. The HW errors is absolutely normal. Nothing wrong there. I seriously cant tell right now if you are trolling or not Anyway I guess this could be confirmed only by pool side reported hashrate, those HW look fishy to me.
|
|
|
Anyhow, enjoy while it lasts.
Greetings!
Care to explain why your average readings are close to "usual" 470 values of 26.xx? Also HW?
|
|
|
@ Wolf0 Would not it be possible to improve eth? Have some pool that are not connecting About ZCash What defines its performance because NVIDIA is much better than AMD in that currency?
Eth miner can be improved past Claymore's AMD GCN ASM Ethash kernel. First, you need to make the damn thing stable, though - he seemed to see others using ASM, and decided to himself... but raw speed matters little if the GPUs/rigs keep dropping like flies. THEN focus on speed. Whats not stable about CM miner? You mean it should work better on OCed (pushed to the edge) rigs? Asking, cause I dont have any problems on my hardware, but I am running mods + underclock + undervolt.
|
|
|
I see BELA lagging a lot. Why is that the case and what does that mean? I hope you can explain that to me Difficulty swings a lot. https://bella.suprnova.cc/index.php?page=statistics&action=blocksWhen it rises high and miners leave then it can take hours for next block to be found. No new block within an hour = lagging. @fonyo Thanks Managed to update server today.
|
|
|
Site Offline?
Whats Happend?
Under heavy load, will be upgrading server this / next week.
|
|
|
Whats with the network? Both suprnova and miningpoolhub are creating blocks like crazy, all orphans.
|
|
|
I have a 3 slot model, but checked that it works. Just remember this is for AMD cards Only.
|
|
|
Indeed the hashrate is different on suprnova and djm miner. On a single 1070 15Mh/s in miner, but 10Mh/s on pool.
Need to check other pools.
|
|
|
Looks like a proper calc is needed for this Will know more after 24h of mining.
|
|
|
Could anyone point me to latest working ccminer release for m7? I have tried this https://github.com/djm34/ccminer-msvc2015/releases but first it fails with vcruntime140 missing. If I supply it, then it fails with "This application was unable to start correctly" Edit: Ok got it, seems this version requires x86 version of vc_redist.x86.exe
|
|
|
So, in summary, we are very close, and we appear to be on schedule for an official migration date middle to end of June 2017, and will of course endeavour to reduce that timeline where it is sensible & reasonable to do so.
Thank you fellow muers from BizzyB and the rest of the MUE team
Could you please reach out to me at whattomine@gmail.com when you have the official switch date? Thanks
|
|
|
Hello,
Thanks for adding it, i'm not one of the devs. But it does seem to work as what i mine at the moment respects what your site states.
Cool, thanks for confirmation!
|
|
|
Following request to add this coin to wtm. Could any dev please share the block_reward formula with me? I can see its been stable on 27.3 for past few blocks, but I need this info to make it flexible on my side. As long as reward does not change feel free to use https://whattomine.com/coins/183-dp-x11 if(dDiff > 75) { // GPU/ASIC difficulty calc 2000000/(((x+1900)/10)^2) nSubsidy = (2000000.0 / (pow((dDiff+1900.0)/10.0,2.0))); if (nSubsidy > 30) nSubsidy = 30; if (nSubsidy < 8) nSubsidy = 8; } else { // CPU mining calc nSubsidy = (11111.0 / (pow((dDiff+51.0)/6.0,2.0))); if (nSubsidy > 200) nSubsidy = 200; if (nSubsidy < 50) nSubsidy = 50; }
Thanks for the response, but are you sure its the correct one? I have checked it for last block and I am getting different results than block explorer. 11_111.0 / (((64.959 + 51.0) / 6.0)**2.0) => 29.747243294671744 Yet the block reward is listed as 45.5 http://dp.explorer.superpool.in/block/00000000020a98da229111d4cbfa4383202b7d3594a1da7aa7730000230733a5According to this formula its not possible to get results in range between 30 and 50 Edit: Ok just realized there is a reduction of 0.91, all good.
|
|
|
Following request to add this coin to wtm. Could any dev please share the block_reward formula with me? I can see its been stable on 27.3 for past few blocks, but I need this info to make it flexible on my side. As long as reward does not change feel free to use https://whattomine.com/coins/183-dp-x11
|
|
|
regarding adding XCN to whattomine. Support wrote that XCN was never listed them (though it is not). Here's what they said I dont think I have ever listed this coin on my site. Please request a new coin addition with all required info from contact form placeholder. but I can't find the add coins form Maybe just fill in this form: https://whattomine.com/contacts/newI will try to process this tomorrow. Never calculated rewards for this algo, will see
|
|
|
What exactly are you trying to do that you need this enabled?
|
|
|
Hey, I use your site a lot, but its quite annoying, that i have to input my stats every time by hand. If i go on ASIC and input there my hash and watt, its still there, when i open it a day later i.e. If i however click on a coin (LTC i.e.) and I get forwarded to the individual coin overview, i have to input it again. Assuming i wanna look into 3 different coins to see the details after i used the overview of ASIC calculation, i have to input everything 3 more times to get the individual details. Would be great, if you could somehow get the stats implemented from the ASIC overview to the individual pages, or if they could save the stats like on the ASIC page. I hope that makes sense Other than that, i love the page. Hey, For some reason forum stopped to send me emails on new thread posts... Anyway I feel your pain, been thinking about this for some time now. The main problem is that on coins, asic pages you can have multiple datasets, so there is no single source to draw stats from. I guess I could read from the first dataset, it would at least solve the issue for single-dataset users. Until I do that, I can only suggest to save a bookmark to each coin you visit frequently. (just make sure you bookmark the url with params, after clicking on calculate) Happy you like the site, will look into it
|
|
|
Hi guys,
Running into problems with 1 of my rig , have there 1x 8990, 1x R9290 and 1x R9 295X2
The rig worked stable for 997 hours without any problem. It freezed in the night and since then I have the watchdog problem and the whole rig freezes after some minutes.
Any idea what got wrong? How to fix it?
Last gpu has fan at 0%, was it always like that? Maybe vrm is overheating?
|
|
|
You can check my values for this card at https://whattomine.com/coinsSelect number of fury cards and deselect any other you might have selected (probably 280x) All values are for 1050/500 with -0.1V undervolt.
|
|
|
|