Hi Sterlingcoiners,

Please do not mistake the lack of communication as a lack of work being done. In the initial builds of the Windows v1.6 wallet, we have uncovered some portability issues. Because there has been many, many commits to the code in the past year and a half since the last build, and some of those commits by people that are no longer in communication, tracking down the source of the portability issue has been a cumbersome task.

We are working diligently to find the proper resolution to the issue and release the Windows v1.6 binaries as soon as possible.

Thank you for your continued patience.

Vas a despertar a la bestia!!!  

Charlie y Wang Chun siempre tuvieron sus mas y sus menos pero parece que Charlie le esta haciendo entrar por el aro, cosa muy dificil, y va a apoyar su Segwit. No te queda nada que pelear...


Felicidades a Rw13enlib88, foroplus y cia. por el movimiento que le estais dando, buen trabajo.

Bittrex nuevo máximo 172 Sat. ( correr a ponerlo en el guiri, que esto mueve montañas... ).

Is there a French forum for this coin? I must say I really like the professional attitude of the devteam.
Do you guys have any updates by the way?

¿Existe algún grupo de Telegram o algo?

¿Existe algún grupo de Telegram o algo?

not sure what you are talking about?

Normal   TES   1246906   5   0 minutes   Mon Apr 10 2017 01:02:02 GMT-0400

site says 0 minutes

Il manque 6 candidats dans ce mini-sondage.
J'invite les gens à ne pas y participer lol

Monedero Android =  Ptc 1000/2000 Satoshis
Para cuando??

So guys, pi3 is pretty simple. i have a pi3 with a 16 gig sd card. here is my exact model : https://www.raspberrypi.org/products/raspberry-pi-3-model-b/

I did look into a gui for pi3. you can cross compile the qt from linux to work with the pi3 because there is no Qt creator that works directly on the pi3 due to lack of needed resources to run the program. i pushed back posting an initial day or two (also a database where i am was compromised by some hackers but lets not talk about that) as i explored this possibility of a cross compile.

So there a few things id like to know that i discovered while messing around with the pi3.  
- it isnt a great idea to run the qt gui version on the pi3. the pi3 is a very limited environment resource wise. so any monitor that is plugged in or program that has a graphical aspect needs video to be rendered. the pi does not have a video card, so the graphics must be rendered by the cpu. this bogs down the cpu. the cpu is only 1.2 GHz which is very slow and by no means high end. so for pi3 daemons are the way to go.
- most people who have a pi access it my ssh which cant run the gui through anyway.
- daemon is lighter weight than the gui allowing for better wallet performance in general.

On sunday i pushed another commit to my tesla repo (which i need to request a merge into the main repo) that fixed and tested all compilation for daemons on all platforms. the makefiles needed some adjustment. i can confirm that all of them work right now (with the exception of the mingw ones, the other ones work so those SHOULD work as is). if you have a pi3, you more than likely use ssh to work with it. so i am assuming you have some basic knowledge (at a minimum) of the commands needed to work with linux's command line (navigation and creating files and such) but you may not have ever compiled a coin. the rest of this post will walk you through how to do just that.


all commands are in italics. these are what you should type into the terminal



Step 0 - Operating System
Install your operating system, I used raspbian (https://www.raspberrypi.org/downloads/raspbian/)
follow the instructions on the site to install it to your SD card (NOOBS is raspbians easy installer, its on the site as well). Your pi might have already come with an OS installed. so you might be able to just skip this step.

Step 1 - Initial Updates
You want to first make sure your pi3 is up to date with all of the current repositories with the following 2 commands. Depending on how much has to update, these might take a while.
sudo apt-get update
sudo apt-get upgrade

Step 2 - Building Compile Environment
Next we want to install the necessary libraries to be able to compile a coin daemon. The following command installs a lot of libraries, as they are all needed to compile any coin (some might not be needed for tesla specifically, but that is ok). So this too might take a while.
sudo apt-get install build-essential libtool autotools-dev automake pkg-config libssl-dev libevent-dev bsdmainutils libboost-all-dev libdb-dev libdb++-dev libminiupnpc-dev libzmq3-dev

Step 3 - Extra Helpful Program
Next we need to install a helper program that will just make getting the code for the coin we want to compile easier.
sudo apt-get install git (this is a fairly small program and should install almost instantly

you then need to download the code for the coin, the following is how you would download teslacoin's code
cd ~
git clone http://www.github.com/TeslacoinFoundation/Teslacoin teslacoin

Step 4 - Compile the Daemon
Now we want to go into the code and compile the daemon so that it runs on the pi3.
cd teslacoin/src/leveldb
make libleveldb.a libmemenv.a
cd ..
make -f makefile.arm-linux
this should compile the full coin. you should end with a Teslacoind program in that folder.

Step 5 - Running the Daemon
To run the coin daemon or give it commands you need to be in the same folder it is located in. which from these instructions should be ~/teslacoin/src/

to navigate there if you arent already there is
cd ~/teslacoin/src
and to run the damon is
./Teslacoind &

Step 6 - Interacting with the daemon
Once the daemon is started you just would send a command to it similar to the same way you started it

./Teslacoind [command] where [command] is replaced with the command you want to do. to get a list of all commands use help
example: ./Teslacoind help
an example of sending coins would be: ./Teslacoind sendtoaddress [address] [amount]
there are quite a few commands, so i would recommend using help to find what you are looking for. the daemon commands give you MORE options than are available in the gui. and learning about them and what they do will help you to learn more about cryptocurrencies in general

Can't connect to peers. What's the name of the conf file supposed to be? teslacoin.conf?

Sterlingcoiners,

I am very pleased to announce, the Sterlingcoin v1.6.0.0 source code has been committed and can be found at our repo, https://github.com/Sterlingcoin/Sterlingcoin-1.6.0.0-Release

Here is the applicable sections of the changlog, https://github.com/CryptoCanary/Sterlingcoin-1.6-WIP/blob/master/CHANGELOG#L1-L12

The seednodes have been upgraded to Sterlingcoin version 1.6.0.0.

Windows and Mac binaries will be built ASAP. Please allow 24 - 48 hours for that, but we hope to have them available sooner.

In the meantime here is a glimpse for you,




Linux users, please upgrade at your earliest convenience. Windows and Mac users, thank you in advance for your, hopefully brief, continued patience for the binaries.

Thank you, Sterlingcoiners!

Como ya os adelanté hace unos días, lanzo un nuevo servicio para Pesetacoin.

www.pesetacoin.games es una nueva web en español para que puedas jugar con tus Pesetacoin a distintos juegos y llevarte unos buenos premios.

Para empezar puedes jugar a cualquiera de éstos tres juegos:

• Mayor que. El típico juego "dice" de cualquier cryptomoneda. Juegas contra la banca y hay varios tipos de apuestas. En función de la apuesta que elijas y de la cantidad enviadas, si ganas, obtienes lo enviado x una cantidad. Con cada jugada, puedes optar a ganar el Jackpot.
• Los Camelleros. Todos los días a las 23:58 hora española peninsular, se celebra una apasionante carrera de camellos. Puedes apostar por tu camello favorito y si gana, llevarte el bote con una buena cantidad de Pesetacoin.
• El Pernales. Un juego en el que con cada jugada puedes acceder a los premios de tres cofres, a cual con mayor cantidad de PTC .

Todos los cálculos de los números ganadores en cada juego se hacen íntegramente a través de datos de la red Pesetacoin para garantizar la aleatoriedad del resultado y la garantía de que no se puede hacer trampas. Puedes consultar la forma de calcular los números ganadores en la sección de normativa.

Para jugar, no se requiere registro. Tan sólo envia tus PTC a la dirección donde se indique en función del juego.

Importante, no enviar PTC para jugar desde un exchange. Sólo desde un wallet personal.

Jugando, contribuyes con un pequeño porcentaje de tu jugada a rellenar el faucet gratis.pesetacoin.info.

En éstos momentos hay un jackpot para el juego Mayor que de 10774 PTC esperando que alguien se lo lleve y en el juego de El Pernales, el cofre de "El Pueblo" tiene una cantidad 2129 PTC.

Aparte de que podeis jugar para divertiros y poder ganar unas PTC, os agradecería feedback del juego para mejores.

En unas semanas, se lanzará la web en inglés para poder dar soporte a la gente de habla inglesa.

Espero que os guste.