Here I reached best results at double threeads true and intensity 58 (RX580 8GB) around 1080~1140H/s *(1280/2000)
But my RX570 4GB is bad :/ around 770H/s (1150/2040)
Are you quoting for cryptonight or cryptonight-heavy? Heavy 1100+ hashes on RX580 8gb. That's pretty good. What are the clocks? (1280/2000) i guess
|
|
|
Hi, I have a 6 AMD GPU (MSI RX580 8G) rig mining ETH. I tried to mine RVN using sgminer 5.5.5 at threeeyed pool but was unsuccessful. Here is my configuration bat file: start /d "C:\Users\WTan\Desktop\sgminer-x16r" sgminer.exe -k x16r -o stratum+tcp://stratum.threeeyed.info:3333 -u RDdsPicJ9PKfVccjGnFrNnMk2F3AYM8SUj -p x -I 19 And here is a picture of what sgminer indicates as the problem: Can anyone tell me what I am doing wrong and what I should do to make it mine RVN properly? Will greatly appreciate any help. Thanks. Add: --gpu-platform 1 or --gpu-platform 0 should work just fine.
|
|
|
better option you say to work using NH?
Yes, but also for new algos like x16r, x16s
|
|
|
I like idea behind x16s. With x16r my psu turned off few times due to too high power consumption, on the other hand x16s is more predictable and safe for psu and cards - i will definitley mine it for a quite time.
|
|
|
Go for Asrock H81 Pro BTC R2, best mining mobo for 6 gpu ever created. Stable, durable, easy to setup and maintain. Integrated graphics works like a charm and there is no troublesome "above 4g decoding" option in bios like in msi z270 boards.
|
|
|
I'm using nicehash with a 1070Ti and want to buy another VGA. 1070Ti or rx 580 quel is better at nicehash?
Get another 1070Ti, far better option than 580
|
|
|
[...] 14.9*72=1074 Gb/s this is the total memory bandwidth with 72 ddr3 chip. So 1074/192*30= ~168 Mh/s this could be the maximum eth mining performance with 72 ddr3 chips. Everything else is bullshit. These numbers are correct. The only interesting factor remaining is power consumption. If it's around 500w AND priced well it could be worth buying but nothing to get overly excited about 168Mh/s @ 500W? There is no point in buying that asic, every 6x 1060 3gb with samsung will give you 140Mh/s @ 460W. Better resale value, not mentioning the warranty...
|
|
|
Silly question, I’m using free version of W10 and not activated on the key yet. Will that make a difference to driver compatibility and reading by the OS? Does getting the official key and having it installed make a better difference?
There should be no difference at all.
|
|
|
Thanks I will try it again later. By the way I just started this new rig with new installation of W10 on biostar 250 btc pro MB. Is there other app or software I need to install in order for the Nvidia app to run smooth installation after download of the Driver?
Driver and msi afterburner is all you need.
|
|
|
Dear all, I just got my p104 cards yesterday however having problem getting my Windows 10 to recognise it. I tried using 390.77 Driver version but Nvidia said the Driver is not compatible with my system.
Can you please advise how and where to download the Drivers for the p104? Thanks in advance!
Works fine for Palit p104-100: http://www.nvidia.com/download/driverResults.aspx/129081/en-us
|
|
|
With just 72% power limit, 40Mh/s is a lot. Have you tested with power limit around 85%?
With power limit set at 85% hashrate per card card is 0.15 Mh/s higher, but power consumption @ wall exceeds 1000W, temperatures are also higher, not worth it.
|
|
|
Could you please share your settings? Windows version, driver, overclock, memory type...
For anyone who might be interested: Palit P104-100There are a few incorrect shares, but nothing serious.If i add 20MHz more on MEMClock then every second share on GPU2 becomes incorrect, i guess +800 is max for everyday use. Yeah, GPU-Z doesn't reveal everything.900W @ wall using 1050W 80 PLUS GOLD Certified PSU.
|
|
|
I'll take 2x 1080 Ti - more future proof.
|
|
|
Install 17.11.4, switch mode to "compute" and you will be good.
|
|
|
I have heard Onda boards need some tweaking to get going, including downloading latest motherboard drivers
http://www.onda.cn/Search.aspxJust to be sure, driver for this board is somewhere there?
|
|
|
I like how your shed is hidden behind this tree. Yup, almost entirely covered
|
|
|
here we go again
|
|
|
OMG, this thread again...
|
|
|
|