Since there is scattered info on the Antminer S2's I thought it would be a good idea to start a thread dedicated to the support and overclocking of the newer S2's
So Far I have replaced my PSU with a newer Enermax 1300Watt Platinum rated as I believed the stock PSU was pushed to close to the limit, this should add some additional head room to OC the boards
My first attempt to SSH into the unit has failed look like the SSH password is not the same as the web interface does anyone know this? SOLVED
WEB LOGIN root
WEB PASSWORD root
SSH LOGIN root
SSH PASSWORD admin
Cant seem to navigate to cd/etc/config directory I get "Permission Denied"
UPDATE File structure is different I have identified where the files are I have successfully raised clock from 196 to 200 Minimal HW error increase (0.08%) and No Temp increase. Small speed increase average is now 1.07TH
Next Id like to compile a list of frequency settings, Power draw for each and HW error rate at each level
Thanks to klondike_bar for this:
option 'freq_value' '6206' #216M
option 'chip_freq' '215.625'
option 'timeout' '37'
#option 'freq_value' '5082' #212M
#option 'chip_freq' '212.5'
#option 'timeout' '36'
#option 'freq_value' '5102' #219M
#option 'chip_freq' '218.75'
#option 'timeout' '38'
Please help with any info you can share
So Far I have replaced my PSU with a newer Enermax 1300Watt Platinum rated as I believed the stock PSU was pushed to close to the limit, this should add some additional head room to OC the boards
My first attempt to SSH into the unit has failed look like the SSH password is not the same as the web interface does anyone know this? SOLVED
WEB LOGIN root
WEB PASSWORD root
SSH LOGIN root
SSH PASSWORD admin
Cant seem to navigate to cd/etc/config directory I get "Permission Denied"
UPDATE File structure is different I have identified where the files are I have successfully raised clock from 196 to 200 Minimal HW error increase (0.08%) and No Temp increase. Small speed increase average is now 1.07TH
Next Id like to compile a list of frequency settings, Power draw for each and HW error rate at each level
Thanks to klondike_bar for this:
option 'freq_value' '6206' #216M
option 'chip_freq' '215.625'
option 'timeout' '37'
#option 'freq_value' '5082' #212M
#option 'chip_freq' '212.5'
#option 'timeout' '36'
#option 'freq_value' '5102' #219M
#option 'chip_freq' '218.75'
#option 'timeout' '38'
Please help with any info you can share
Ok so how did you access those files once you logged in? I can't seem to access anything. The same lines from the S1 do not get you to the dance so to speak.