Dear eXtremal,

could you pls make pament for http://coinsforall.io/#!/coin/ZCASH/wallet/t1b3hhhw8iST8gHxmBkEphzJxn3nPqHyKAN

it is already in requested and waiting

thanks in advanced

@extremal

please lower my payout threshold from 0.01 ZCASH  tp 0.005 ZCASH


http://coinsforall.io/#!/coin/ZCASH/wallet/t1b3hhhw8iST8gHxmBkEphzJxn3nPqHyKAN


THANK YOU

on the system there are already 8 different miners but he only enables 2 why would he not install other miners that are and have been available to allow mining in other places? it is a trend and a repeated situation, obligating to send only to one pool because of the miner..... well on the pool where he sends it happens to always bee the highest percentage pool and he says he just cant change things ..... even with the 8 different miners installed he cant do things??? Bullshit!!!!!!


as all the other miners already installed he could simply put one more in there and let us move to a pool that pays and has a significantly lower pool cost also with a higher pool payout.... and he has known this for days!!!!!

https://zec.suprnova.cc/index.php?page=gettingstarted

or even     https://zmine.io/faq#q7

and or     http://zcash.flypool.org/

the last two offer annon mining so no need to signup and use the addy for payment..... what reason is there not to be able to use these?
the only reason would be if there is obscure gain by the dev!!!!!

@extremal

please lower my payout threshold from 0.01 ZCASH  tp 0.005 ZCASH


http://coinsforall.io/#!/coin/ZCASH/wallet/t1b3hhhw8iST8gHxmBkEphzJxn3nPqHyKAN


THANK YOU

@extremal

please lower my payout threshold from 0.01 ZCASH  tp 0.005 ZCASH


http://coinsforall.io/#!/coin/ZCASH/wallet/t1b3hhhw8iST8gHxmBkEphzJxn3nPqHyKAN


THANK YOU

actually there are several but he refuses to do it  probably because he is getting a big kickback from the pool for sending so much hash there and the pool is not paying out correctly so they can split the goods

ouch.......


Delivery to the following recipient failed permanently:

     admin@coinsforall.io

Technical details of permanent failure:
read error: generic::failed_precondition: read error (0): error


the email address was picked from the mining pool referance

it also seems like there is a small congregation of other people making a killing off that pool!

https://bitcointalk.org/index.php?topic=1541084.0

Website: http://simplemining.net


and the owner is refusing to allow any change
so it seems that he has a deal or something with that pool to send hash there and grab the stash
what other reason would he not desire to change the pool for everyone using that miner?

referance  =

BUMP


@extremal

please lower my payout threshold from 0.01 ZCASH  tp 0.005 ZCASH


http://coinsforall.io/#!/coin/ZCASH/wallet/t1b3hhhw8iST8gHxmBkEphzJxn3nPqHyKAN


THANK YOU

that thread is completely cluttered with people that are not receiving payments and if your sending people there as the only choice it would also imply that there is a reason?
there must be a reason for this unchangable choice!

@extremal

If possible, please lower my payout threshold from 0.01 ZCASH  tp 0.005 ZCASH


http://coinsforall.io/#!/coin/ZCASH/wallet/t1b3hhhw8iST8gHxmBkEphzJxn3nPqHyKAN


THANK YOU

@extremal

If possible, please lower my payout threshold from 0.01 ZCASH  tp 0.005 ZCASH


http://coinsforall.io/#!/coin/ZCASH/wallet/t1b3hhhw8iST8gHxmBkEphzJxn3nPqHyKAN


THANK YOU

hey everyone, CCMiners pool is up and running fine just like always, only 1% fee and not 4% like where  this mine is obligated to send it!
how about everyone ask for the option to change pools and make better money?


https://zec.suprnova.cc

yes i can clock it but what i can not stop is the over writting of the config file and changing the parameters so my two gpus do not try to be the 6 gpus that are in your config! plus the config file has many parms that need changing for my cards and im not asking you to change them i would do that but what i am asking is how to shut off the required communication with your server so you do not have the control over it and i can change what is needed for my rig?

[GPU 1] T=-1C A=-1% sols=13.059
[GPU 2] crashed!
[GPU 3] T=-1C A=-1% sols=12.678
(ST/INV/DUP): 12x 0ch(0/0/0)
[GPU 0] crashed!
[GPU 1] crashed!
[GPU 2] crashed!
[GPU 3] crashed!
(ST/INV/DUP): 12x 0ch(0/0/0)


0. AMD Radeon HD 7900 Series (:0.0)
engine clock 1125MHz, memory clock 1450MHz, core voltage 1.188VDC, performance level 3, utilization 62%
fan speed 38% (1293 RPM) (default)
temperature 51 C
powertune 0%
1. AMD Radeon HD 7900 Series (:0.1)
engine clock 1125MHz, memory clock 1450MHz, core voltage 1.188VDC, performance level 3, utilization 55%
fan speed 39% (1400 RPM) (default)
temperature 53 C
powertune 0%


i would love to use this better but you keep over writting the config file

with the fact that in the config there are too many gpu indications it causes the miner to crash because 3 of the 5 settings are null and void and not present so how to i completely shut off communication with your website? that way it wont over write it correct?


i am not asking you to do custom for me i am asking if i can shut the updating off so i can correct it?

is there any possible way i could shut off your refreshing the config file for zcash mining?  i could set it for the gpu that i have with the right settings but your system keeps over writing the setting telling it that i have 5 gpus and i dont have that! plus the fan settings and more need to be adjusted for my rig not those that you have for stock config file  and after i correct the file it get over written ..... any help?

it is completly off line at the moment because i cannot use it! if your interested in a file , tell me witch one your interested in and i will open the usb under a different operating system and send you the file or post it here and i prefer not to post my email address in public thank you...

my motherboard uses a APU A6 and with your system even if i turn it off in the bios it detects the apu and attempts to use the graphics card and stalls and hangs.  also i am using hd 7970 gpu with water cooled cooling system and once your system detects the fan sppd is too low it resets and reboots the system because it cannot make the fans enter within the limits... i also have software that i could install for the water cooling system but unable to install this software for the temp control.

please read this before answering incorrectly


not a question if i like to use it or not ,but it is simply a question of i would like to use it but unable to for the above written reasons and i was asking if there is a solution?