[ANN][AMS] AmsterdamCoin™ | 100% PoS, Cold-Staking, Side-Chains, Smart-Contracts

[olegoleg117]

Hi

Tell the newbie
Wallet for windows is not synchronized the second day

I want to install a wallet on Linux

I installed ubuntu 16.10
Downloading from the ams website a wallet under Linux
I set the attribute
And can not run it
How to launch it?
I can install and run programs under Linux, but I can not run this wallet

[1715289144]

1715289144

[1715289144]

1715289144

[BDave88]

Hi

Tell the newbie
Wallet for windows is not synchronized the second day

I want to install a wallet on Linux

I installed ubuntu 16.10
Downloading from the ams website a wallet under Linux
I set the attribute
And can not run it
How to launch it?
I can install and run programs under Linux, but I can not run this wallet

Dont even bother with the v.3 Linux wallet. It wont sync. Wait till v.4 comes out shortly.

[fratrad]

How I can mine this coin?

[smartbox]

I have a masternode installed on a linux server and have a windows based wallet.  I may be wrong however it seems that when I close the wallet the masternode services are in an offline state.  Is there anyway to avoid having to constantly run a wallet to run the masternode service without interruption?  I know the config works as I have been paid.  thanks

[BDave88]

I think I've sorted the wallet issue. 

You have to delete everything except the "wallet.dat" in the directory. Extract the bootstrap to that folder and then start the program.

Put the bootstrap into the folder that only has the wallet.dat  file in. Don't start the QTprogram until you've done this. If you load the QT file, then put the bootstrap in it later on it just gets hung up and wont load (no idea why).

[gawajn]

just bought a bunch of coins

[ghenghisd]

How does the bootstrap work in general? I've extracted the bootstrap folder to where the wallet application is held. Nothing changed when I open the wallet though.

[BDave88]

How does the bootstrap work in general? I've extracted the bootstrap folder to where the wallet application is held. Nothing changed when I open the wallet though.

Hey what Operating System are you using?

[ghenghisd]

How does the bootstrap work in general? I've extracted the bootstrap folder to where the wallet application is held. Nothing changed when I open the wallet though.

Hey what Operating System are you using?

It is the windows wallet. I am running Windows 10 (64-bit). Thanks

[BDave88]

Open up the File Explorer
Go to your profile (The folder that is usually your name or whatever your username for win10 is)
--- On the top of the file explorer folder under the tab called VIEW there should be a tickbox for hidden items - tick this.

Open the hidden folder "AppData"
Then open "Roaming" folder
Find the folder called amsterdamcoin2 (it might be name slightly different on Windows - but it'll be obvious which folder is for Amsterdam Coin)
Put Bootstrap.dat in that folder.

Load the program.

If the program is still stuck and not loading blocks -- close it and repeat the above process, but when you put Bootstrap into the folder, delete all the files in it EXCEPT WALLET.dat
Restart the program and it will start to sync blocks.

[ghenghisd]

Open up the File Explorer
Go to your profile (The folder that is usually your name or whatever your username for win10 is)
--- On the top of the file explorer folder under the tab called VIEW there should be a tickbox for hidden items - tick this.

Open the hidden folder "AppData"
Then open "Roaming" folder
Find the folder called amsterdamcoin2 (it might be name slightly different on Windows - but it'll be obvious which folder is for Amsterdam Coin)
Put Bootstrap.dat in that folder.

Load the program.

If the program is still stuck and not loading blocks -- close it and repeat the above process, but when you put Bootstrap into the folder, delete all the files in it EXCEPT WALLET.dat
Restart the program and it will start to sync blocks.

It worked after copying (and replacing) all of the bootstrap files to the amsterdamcoin2 folder.

[Halmater]

is there any telegram group for this coin to get connect with devs ?

Nothin of any sort....This is the only place...
We desparately need a community channel...Anyone hearing here....

exactly i still cant synchronize my wallet,is the any guide ?

[luckytimes]

Any idea when masternodes are coming out?

[ghenghisd]

It seems like the wallet stops synchronising after a certain amount of time left alone and needs to be closed and re-opened for it to continue to sync.

[olegoleg117]

Hi!
The password that is used in this file must match the password that the wallet is encrypted with?

Example Amsterdamcoin.Conf
listen=1
server=1
daemon=1
rpcuser=[An very long username]
rpcpassword=[An incredible strong pasword]
rpcallowip=127.0.0.1

[zecon]

Open up the File Explorer
Go to your profile (The folder that is usually your name or whatever your username for win10 is)
--- On the top of the file explorer folder under the tab called VIEW there should be a tickbox for hidden items - tick this.

Open the hidden folder "AppData"
Then open "Roaming" folder
Find the folder called amsterdamcoin2 (it might be name slightly different on Windows - but it'll be obvious which folder is for Amsterdam Coin)
Put Bootstrap.dat in that folder.

Load the program.

If the program is still stuck and not loading blocks -- close it and repeat the above process, but when you put Bootstrap into the folder, delete all the files in it EXCEPT WALLET.dat
Restart the program and it will start to sync blocks.

This still did not work. Tried several different things here and still stuck on 11 weeks.

[TimC]

Any idea when masternodes are coming out?

Master Nodes are out on the current wallet but I think AMS is going to be doing a coin swap to a new block chain.

[TheFoes]

hi. can i get a nodes list. its not syncing at all.. thanks!

[zecon]

Any idea when masternodes are coming out?

Master Nodes are out on the current wallet but I think AMS is going to be doing a coin swap to a new block chain.

Can we get a confirmation of a swap or any update there as well?

I want to get my wallet syncing and be prepared to move them on an exchange when necessary.

[TimC]

hi. can i get a nodes list. its not syncing at all.. thanks!

Code:

?
[
    {
        "addr" : "46.4.64.68:61510",
        "services" : "00000001",
        "lastsend" : 1501908011,
        "lastrecv" : 1501908021,
        "bytessent" : 2742485,
        "bytesrecv" : 3727123,
        "conntime" : 1501097642,
        "timeoffset" : 0,
        "pingtime" : 0.21875200,
        "version" : 61403,
        "subversion" : "/KeesdeWit:3.1.0/",
        "inbound" : false,
        "startingheight" : 1262326,
        "banscore" : 0,
        "syncnode" : true
    },
    {
        "addr" : "81.169.178.19:61510",
        "services" : "00000001",
        "lastsend" : 1501908008,
        "lastrecv" : 1501908021,
        "bytessent" : 2760801,
        "bytesrecv" : 5135294,
        "conntime" : 1501097671,
        "timeoffset" : 0,
        "pingtime" : 0.30219300,
        "version" : 61403,
        "subversion" : "/KeesdeWit:3.1.0/",
        "inbound" : false,
        "startingheight" : 1262326,
        "banscore" : 0,
        "syncnode" : false
    },
    {
        "addr" : "148.251.45.66:61510",
        "services" : "00000001",
        "lastsend" : 1501908021,
        "lastrecv" : 1501908018,
        "bytessent" : 3452337,
        "bytesrecv" : 2572109,
        "conntime" : 1501098378,
        "timeoffset" : 0,
        "pingtime" : 0.21873700,
        "version" : 61403,
        "subversion" : "/KeesdeWit:3.1.0/",
        "inbound" : false,
        "startingheight" : 1262341,
        "banscore" : 0,
        "syncnode" : false
    },
    {
        "addr" : "60.225.35.163:61510",
        "services" : "00000001",
        "lastsend" : 1501908021,
        "lastrecv" : 1501908021,
        "bytessent" : 2533061,
        "bytesrecv" : 2414692,
        "conntime" : 1501279945,
        "timeoffset" : 0,
        "pingtime" : 0.43748800,
        "version" : 61403,
        "subversion" : "/KeesdeWit:3.1.0/",
        "inbound" : false,
        "startingheight" : 1267853,
        "banscore" : 0,
        "syncnode" : false
    },
    {
        "addr" : "84.162.242.84:61510",
        "services" : "00000001",
        "lastsend" : 1501908021,
        "lastrecv" : 1501908021,
        "bytessent" : 1845312,
        "bytesrecv" : 3276699,
        "conntime" : 1501380932,
        "timeoffset" : 0,
        "pingtime" : 0.89061900,
        "version" : 61403,
        "subversion" : "/KeesdeWit:3.1.0/",
        "inbound" : false,
        "startingheight" : 1270882,
        "banscore" : 0,
        "syncnode" : false
    },
    {
        "addr" : "51.15.74.115:61510",
        "services" : "00000001",
        "lastsend" : 1501908027,
        "lastrecv" : 1501908027,
        "bytessent" : 1395789,
        "bytesrecv" : 3028006,
        "conntime" : 1501502299,
        "timeoffset" : 0,
        "pingtime" : 0.21875400,
        "version" : 61403,
        "subversion" : "/KeesdeWit:3.1.0/",
        "inbound" : false,
        "startingheight" : 1274570,
        "banscore" : 0,
        "syncnode" : false
    },
    {
        "addr" : "178.62.107.55:61510",
        "services" : "00000001",
        "lastsend" : 1501908017,
        "lastrecv" : 1501908021,
        "bytessent" : 1065290,
        "bytesrecv" : 2733628,
        "conntime" : 1501601355,
        "timeoffset" : 0,
        "pingtime" : 0.21875200,
        "version" : 61403,
        "subversion" : "/KeesdeWit:3.1.0/",
        "inbound" : false,
        "startingheight" : 1277573,
        "banscore" : 0,
        "syncnode" : false
    },
    {
        "addr" : "213.108.119.84:61510",
        "services" : "00000001",
        "lastsend" : 1501908024,
        "lastrecv" : 1501908024,
        "bytessent" : 938180,
        "bytesrecv" : 1166982,
        "conntime" : 1501672566,
        "timeoffset" : 0,
        "pingtime" : 0.21875300,
        "version" : 61403,
        "subversion" : "/KeesdeWit:3.1.0/",
        "inbound" : false,
        "startingheight" : 1279802,
        "banscore" : 0,
        "syncnode" : false
    },
    {
        "addr" : "98.230.78.71:61510",
        "services" : "00000001",
        "lastsend" : 1501908026,
        "lastrecv" : 1501908025,
        "bytessent" : 687181,
        "bytesrecv" : 825945,
        "conntime" : 1501732257,
        "timeoffset" : 0,
        "pingtime" : 1.09376700,
        "version" : 61403,
        "subversion" : "/KeesdeWit:3.1.0/",
        "inbound" : false,
        "startingheight" : 1281318,
        "banscore" : 0,
        "syncnode" : false
    },
    {
        "addr" : "46.101.125.91:61510",
        "services" : "00000001",
        "lastsend" : 1501908019,
        "lastrecv" : 1501908023,
        "bytessent" : 277588,
        "bytesrecv" : 511632,
        "conntime" : 1501844510,
        "timeoffset" : 0,
        "pingtime" : 0.21875200,
        "version" : 61403,
        "subversion" : "/KeesdeWit:3.1.0/",
        "inbound" : false,
        "startingheight" : 1283101,
        "banscore" : 0,
        "syncnode" : false
    },
    {
        "addr" : "149.210.193.140:61510",
        "services" : "00000001",
        "lastsend" : 1501908023,
        "lastrecv" : 1501908024,
        "bytessent" : 277380,
        "bytesrecv" : 511848,
        "conntime" : 1501845444,
        "timeoffset" : 0,
        "pingtime" : 0.30221500,
        "version" : 61403,
        "subversion" : "/KeesdeWit:3.1.0/",
        "inbound" : false,
        "startingheight" : 1283113,
        "banscore" : 0,
        "syncnode" : false
    },
    {
        "addr" : "185.41.187.170:61510",
        "services" : "00000001",
        "lastsend" : 1501908017,
        "lastrecv" : 1501908021,
        "bytessent" : 37430,
        "bytesrecv" : 82016,
        "conntime" : 1501897906,
        "timeoffset" : 0,
        "pingtime" : 0.21875300,
        "version" : 61403,
        "subversion" : "/KeesdeWit:3.1.0/",
        "inbound" : false,
        "startingheight" : 1284411,
        "banscore" : 0,
        "syncnode" : false
    }
]