Avalon 6 Vs Antminer S7, which one you will choose?

[VirosaGITS]

I'll take a delta over pretty much anything else on the market, 8 out of 7 days of the week. There aren't many others I would trust to keep a $2k investment from burning itself down.

Seriously? There are plenty of good fans out there that are reliable and quieter, Noctuas like i said earlier are pretty damn prestigious in the fan world, I haven't heard of anyone having issues with them.

dont know about the other s5 and s4 n stuff but my s7 antminer fan died and i tried 2 of the top of the line Noctua fans they went at about 3500rpm and the air coming out wasen't even half of what the stock fans do, my s7 started heating up fast so i returned the Noctuas and now ordered the Original Delta 12038 fan 12V 3.9A TFC1212DE hope the voltage gona be ok for the s7 not sure if they are exactly the same amps as the stock fans.

Those will be fine. But no point in commenting on this thread, its a 2015 old dead thread, it was started when we were speculating about S7 and A6. The Noctuas would be good fans if you undervolted and underclocked the S7.

[chikenfeed]

oops my bad... as if you would want to under clock tho anyways the deltas in getting in are 46.8W witch is more then the stock fans so im not sure if its going to destroy my s7

[Finksy]

oops my bad... as if you would want to under clock tho anyways the deltas in getting in are 46.8W witch is more then the stock fans so im not sure if its going to destroy my s7

I'm not convinced the TFC will draw more than the factory fans on the S7, I thought I remember reading that was the fan they were using on the S7's (or at least the same specs..)

And as for being capable of handling the draw, the new S7 (https://bitmaintech.com/productDetail.htm?pid=000201603310959482268cfunbq106E5) uses a single 6000RPM fan instead of the 2x 4000RPM fans, and guaranteed it draws more than the TFC1212DE does. You will be fine with that fan from a controller point of view.

[Ethey]

It is said Avalon will start to ship the Avalon 6 at the end of Oct,2015 , hashing rate : 3.5T   , Power consuming : 300W / T  ,  price: USD 315 / T .
After calculation, Avalon 6 will be USD60 /T less and 70W/T more if antminer keep the same price with the next bath.

It is no official news and no photo right now , but it is been pre-saling on some chinese website.

I hope Avalon will do better job on  noise level of Avalon 6, then can get more customers on the current hard situation.

Please post out your idea for this ..

***************************************************

Update on 21th Oct.:
Avalon finally get their newest bitcoin miner Avalon6 spec in public


Avalon6 Specification
Hash rate   　3.65T±10%
Power at wall   1100W（power efficiency 90%）。
Quantity of chip  80
Power connector  4x 6PIN，you need to connect all 4 connectors when running
Cooling fan  12038, current min: 1.6A ,Max:2.8A
Max speed: 3800RPM
Temperature  Max Temperature of intake :38℃
Controller  Raspberry PI（version 1，B，B+），。
Each Raspberry PI can control 60 units
AUC  max 6 units can be connected in series with each AUC
Protection  The machine will not start when the fan is damaged 。
Dimension  136×150×334mm
Weight  4.8kg
INGRESS PROTECTION  IP20
Power supply  1200W 80 plus gold power supply recommended
Voltage  min:11.7V   max: 12.2V

iTopshop will sell it soon
  
[/quote

the shop is in eror 404 mode