[ANN] Stratum for Ethereum. Increase earning up to 20% compared to getwork.

[Nebell]

So this is better for Nvidia compared to Claymore?
Mining only one coin.

[1714122829]

1714122829

[1714122829]

1714122829

[1714122829]

1714122829

[rampage999]

So nowadays the miners have implemented stratum protocal within them, do we still need this proxy ?

[Meatball]

Anyone know why Claymore miner would throw a '287c / checkread timeout' error when connecting to this proxy?

Code:

12:46:48:412	287c	ETH: Stratum - connecting to '127.0.0.1' <127.0.0.1> port 8080
12:46:48:448	287c	send: {"worker": "eth1.0", "jsonrpc": "2.0", "params": ["walletaddress", ""], "id": 2, "method": "eth_submitLogin"}

12:46:48:451	287c	ETH: Stratum - Connected (127.0.0.1:8080)
12:46:48:506	1fc8	No pool specified for Decred! Ethereum-only mining mode is enabled

12:46:48:509	1fc8	ETHEREUM-ONLY MINING MODE ENABLED (-mode 1)

12:46:48:513	1fc8	ETH: eth-proxy stratum mode
12:46:48:517	1fc8	Watchdog enabled
12:46:48:520	1fc8	Remote management is enabled on port 3333
12:46:48:523	1fc8	

12:46:50:585	22a8	recv: 51
12:46:50:590	22a8	srv pck: 50
12:46:50:597	22a8	srv bs: 0
12:46:50:602	22a8	sent: 120
12:46:51:583	287c	checkread timeout
12:46:54:716	287c	checkread timeout
12:46:55:588	aec	recv: 51
12:46:55:592	aec	srv pck: 50
12:46:55:595	aec	srv bs: 0
12:46:55:598	aec	sent: 120
12:46:57:860	287c	checkread timeout
12:47:00:580	2048	recv: 51
12:47:00:583	2048	srv pck: 50
12:47:00:587	2048	srv bs: 0
12:47:00:590	2048	sent: 120
12:47:00:991	287c	checkread timeout
12:47:04:117	287c	checkread timeout
...
12:47:19:788	287c	ETH: Job timeout, disconnect, retry in 20 sec...

It will just continue to do that indefinitely.  I know I could just use Ethminer, but would like to understand why Claymore isn't working.  Anyone have any ideas?

[khaledraw]

it's over an hour now the miner is working and the proxy but there is no thing at the pool !!!
it looks like i don't do any thing

no hash
no shares
no any thing since i start working with proxy

may be i will back to clymore again

https://expmine.pro/#/account/0x20fdfce1653e32e4b87f9276da31d30325d62040

[Natweast]

it's over an hour now the miner is working and the proxy but there is no thing at the pool !!!
it looks like i don't do any thing

no hash
no shares
no any thing since i start working with proxy

may be i will back to clymore again

https://expmine.pro/#/account/0x20fdfce1653e32e4b87f9276da31d30325d62040

Maybe you read the instruction again. It is working well for me.

[tiberion]

Can anyone give a new guy a hand on windows 10.  Switching over from Bitcoin, I can get the proxy to run and show up like it should, but I can not for the life of me get any miners going- see below-

https://i.imgur.com/55hzUFz.jpg

and

http://imgur.com/npRS5Xm


and here is my config file:

###
# Examples of command line for miners:
#
#   ethminer.exe --farm-recheck 200 -G -F http://HOST:PORT/
#   ethminer.exe --farm-recheck 300 -G -F http://HOST:PORT/rig1
#
#   ethminer.exe -G -F http://127.0.0.1:8080/
#   ethminer.exe --farm-recheck 100 -G -F http://192.168.0.33:8080/rig1
#
#  farm-recheck parameter is very individual. Just test different values.
#
#  You can submit shares without workername or
#  You can provide workername:
#   - with url like "/rig1"
#   - or use automatically numbering(integer) based on IP of miner
#
#  Servers:
#    EU-Server:  eu1.ethermine.org Port: 4444
#    US East-Server:  us1.ethermine.org Port: 4444
#    US West-Server:  us2.ethermine.org Port: 4444
#    Asia-Server:  asia1.ethermine.org Port: 4444
#
###

# Select Ethereum ETH
COIN = "ETH"

# Host and port for your workers
HOST = "192.168.1.198"
PORT = 8080

# Coin address where money goes
WALLET = "0xaA099d3867AC992D93944BB3760166a8Ebf71f3e"

# To donate please use wallet "0xea7263feb7d8a8ab0a11eedd8f1ce04412ab0820"

# It's useful for individually monitoring and statistic
ENABLE_WORKER_ID = True

# On DwarfPool you have option to monitor your workers via email.
# If WORKER_ID is enabled, you can monitor every worker/rig separately.
MONITORING = False
MONITORING_EMAIL = "mail@example.com"

# Main pool
POOL_HOST = "us1.ethermine.org"
POOL_PORT = 4444

# Failover pool
POOL_FAILOVER_ENABLE = True

POOL_HOST_FAILOVER1 = "eu1.ethermine.org"
POOL_PORT_FAILOVER1 = 4444

POOL_HOST_FAILOVER2 = "eth-us.dwarfpool.com"
POOL_PORT_FAILOVER2 = 8008

POOL_HOST_FAILOVER3 = "eth-hk.dwarfpool.com"
POOL_PORT_FAILOVER3 = 8008


# Logging
LOG_TO_FILE = False

# Enable debug
DEBUG = False

[tiberion]

OK, got it too work like 1 time, but then I think I crashed it trying to change a setting to get my GPU working at 100%.

Here's my new batch file, turns out I was missing the "miner.exe file download all together.
So, do I launch it using my .bat command, below, or by clicking on the miner.exe using windows 10?

New ethminer.bat file:

Setx GPU_FORCE_64BIT_PTR 0
Setx GPU_MAX_HEAP_SIZE 100
Setx GPU_USE_SYNC_OBJECTS 1
SET GPU_SINGLE_ALLOC_PERCENT = 100
ethminer.exe --farm-recheck 300 -G -U -F http://192.168.1.198:8080

Or, should it be:

Setx GPU_FORCE_64BIT_PTR 0
Setx GPU_MAX_HEAP_SIZE 100
Setx GPU_USE_SYNC_OBJECTS 1
SET GPU_SINGLE_ALLOC_PERCENT = 100
#ethminer.exe -G -F http://127.0.0.1:8080/
#ethminer.exe --farm-recheck 300 -G -U -F http://192.168.1.198:8080

(yes there are no # signs in the actual file, but it kept deleting my address as suspicious for the 127 one)


Thanks so much for your time/help!

[centurionMiner]

Thank you for the aweseom py tools that you have deveolped.

Is exetremly clear.

My question is, how is it related with the 3 different method of esm (Ethereum stratum mode) used by Claymore?

0 - eth-proxy mode
1 - qtminer mode
2 - miner-proxy mode

[demonwhite]

hello, here my config file for EXP expance coin

===========================================================
# Select Ethereum ETH or Expanse EXP
COIN = "EXP"

# Host and port for your workers
HOST = "127.0.0.1"
PORT = 8080

# Coin address where money goes
WALLET = "0xe786c74d176a78add6300443d5b97a8c325ea2c2"

# To donate please use wallet "0xea7263feb7d8a8ab0a11eedd8f1ce04412ab0820"

# It's useful for individually monitoring and statistic
ENABLE_WORKER_ID = Enable

# On DwarfPool you have option to monitor your workers via email.
# If WORKER_ID is enabled, you can monitor every worker/rig separately.
MONITORING = False
MONITORING_EMAIL = "mail@example.com"

# Main pool
POOL_HOST = "exp-eu.dwarfpool.com"
POOL_PORT = 8018

# Failover pool
POOL_FAILOVER_ENABLE = True

POOL_HOST_FAILOVER1 = "exp-us.dwarfpool.com"
POOL_PORT_FAILOVER1 = 8018



# Logging
LOG_TO_FILE = True
===================================================
when i start .exe file, window flashes and nothing else.
at log file we have:
2017-08-20 13:51:38,838 ERROR proxy # Wrong WALLET!
2017-08-20 13:51:45,242 ERROR proxy # Wrong WALLET!
2017-08-20 13:51:48,125 ERROR proxy # Wrong WALLET!

but i started it noy only 3 times, why another attemts not at log file?
why program says that my wallet wrong? it is 100% expance wallet

please help

[anlam511]

i'm using bat file with config:
setx GPU_FORCE_64BIT_PTR 0
setx GPU_MAX_HEAP_SIZE 100
setx GPU_USE_SYNC_OBJECTS 1
setx GPU_MAX_ALLOC_PERCENT 100
setx GPU_SINGLE_ALLOC_PERCENT 100
ethminer --farm-recheck 200 -G -F http://127.0.0.1:8080/Worker --list-devices
pause

When i lauch ethminer.bat, it immediately stopped. My GPU card is Asus 1060 O3G. What's problem?

[yobigd20]

as most eth/exp pools support stratum, is there any point or benefit to using this proxy vs just connecting directly to the pool's stratum port using claymore's miner?  (i wouldnt think so, just checking for my own sanity, plus the fact that claymore in his readme even directly states "Using any proxies will reduce effective hashrate by at least 1%, so connect miner to Stratum pools directly. Using HTTP pools will reduce effective hashrate by at least 5%."

[lppzaz]

trying this proxy with dwarfpool, it connects and listens for miner, then i use genoil to connect using the settings here, it says can not find mining hardware....i have 6 rx580's, it does not detect them at all, can I use claymore to mine and run it through this proxy?

when i run the devices.bat file it picks up all 6 cards...but when I run the miner it picks up 0 wtf?

[speedyb]

hi do i need to run this ann stratum alongside claymore? and will it increase my earnings by doing so? its not a cpu miner this strat for eth is it?

[speedyb]

Anyone know why Claymore miner would throw a '287c / checkread timeout' error when connecting to this proxy?

Code:

12:46:48:412	287c	ETH: Stratum - connecting to '127.0.0.1' <127.0.0.1> port 8080
12:46:48:448	287c	send: {"worker": "eth1.0", "jsonrpc": "2.0", "params": ["walletaddress", ""], "id": 2, "method": "eth_submitLogin"}

12:46:48:451	287c	ETH: Stratum - Connected (127.0.0.1:8080)
12:46:48:506	1fc8	No pool specified for Decred! Ethereum-only mining mode is enabled

12:46:48:509	1fc8	ETHEREUM-ONLY MINING MODE ENABLED (-mode 1)

12:46:48:513	1fc8	ETH: eth-proxy stratum mode
12:46:48:517	1fc8	Watchdog enabled
12:46:48:520	1fc8	Remote management is enabled on port 3333
12:46:48:523	1fc8	

12:46:50:585	22a8	recv: 51
12:46:50:590	22a8	srv pck: 50
12:46:50:597	22a8	srv bs: 0
12:46:50:602	22a8	sent: 120
12:46:51:583	287c	checkread timeout
12:46:54:716	287c	checkread timeout
12:46:55:588	aec	recv: 51
12:46:55:592	aec	srv pck: 50
12:46:55:595	aec	srv bs: 0
12:46:55:598	aec	sent: 120
12:46:57:860	287c	checkread timeout
12:47:00:580	2048	recv: 51
12:47:00:583	2048	srv pck: 50
12:47:00:587	2048	srv bs: 0
12:47:00:590	2048	sent: 120
12:47:00:991	287c	checkread timeout
12:47:04:117	287c	checkread timeout
...
12:47:19:788	287c	ETH: Job timeout, disconnect, retry in 20 sec...

It will just continue to do that indefinitely.  I know I could just use Ethminer, but would like to understand why Claymore isn't working.  Anyone have any ideas?

 meatball, that sounds like one of your gpu's is throwing out a high temp maybe? idk maybe way of but the 127.0.0.1 is a loopback ip router. also claymore
looks alot like this in the bat plus your epools.txt

setx GPU_FORCE_64BIT_PTR 0
setx GPU_MAX_HEAP_SIZE 100
setx GPU_USE_SYNC_OBJECTS 1
setx GPU_MAX_ALLOC_PERCENT 100
setx GPU_SINGLE_ALLOC_PERCENT 100
EthDcrMiner64.exe -epool us1.ethermine.org:14444 -ewal 0x524c5a25c3026173b688e11cf432c788809aebb8.SpeedyB -epsw x -mode 1 -ftime 10 -dcri 11

[makomako]

no need to run this stratum, most of the pool runs it now. if you noticed you have stratum at your bat file when setting up pool address.

[anda123]

I also have this problem. Keeps looping

2016-02-16 10:31:59,927 INFO proxy # MAIN NEW_JOB
2016-02-16 10:32:03,078 INFO proxy # MAIN NEW_JOB
2016-02-16 10:32:11,973 INFO proxy # MAIN NEW_JOB
2016-02-16 10:32:20,450 INFO proxy # MAIN NEW_JOB
2016-02-16 10:32:35,349 INFO proxy # MAIN NEW_JOB
2016-02-16 10:32:59,984 INFO proxy # MAIN NEW_JOB
2016-02-16 10:33:25,260 INFO proxy # MAIN NEW_JOB[/i]

Is there any config issue ?

2016-02-16 10:31:59,640 WARNING proxy # Ethereum Stratum proxy version: 0.0.4
2016-02-16 10:31:59,654 WARNING proxy # Trying to connect to Stratum pool at eth-eu.dwarfpool.com:8008
2016-02-16 10:31:59,773 INFO stats # 1 peers connected, state changed 1 times
2016-02-16 10:31:59,775 INFO proxy # Connected to Stratum pool at eth-eu.dwarfpool.com:8008
2016-02-16 10:31:59,842 WARNING proxy # -----------------------------------------------------------------------
2016-02-16 10:31:59,859 WARNING proxy # PROXY IS LISTENING ON ALL IPs ON PORT 8008
2016-02-16 10:31:59,861 WARNING proxy # -----------------------------------------------------------------------
2016-02-16 10:31:59,861 WARNING proxy # Wallet: 0x748f27895887977c6c12827dc031fee3d00c20a9
2016-02-16 10:31:59,861 WARNING proxy # Worker ID enabled: True
2016-02-16 10:31:59,861 WARNING proxy # Email monitoring disabled
2016-02-16 10:31:59,861 WARNING proxy # Failover enabled: False
2016-02-16 10:31:59,862 WARNING proxy # -----------------------------------------------------------------------
2016-02-16 10:31:59,927 INFO proxy # MAIN NEW_JOB
2016-02-16 10:32:03,078 INFO proxy # MAIN NEW_JOB
2016-02-16 10:32:11,973 INFO proxy # MAIN NEW_JOB
2016-02-16 10:32:20,450 INFO proxy # MAIN NEW_JOB
2016-02-16 10:32:35,349 INFO proxy # MAIN NEW_JOB
2016-02-16 10:32:59,984 INFO proxy # MAIN NEW_JOB
2016-02-16 10:33:25,260 INFO proxy # MAIN NEW_JOB

----------------------------------------------------------------------------

What im doing wrong here? It's looping that "Main new job" over and over again.

Win10/64bit

The lines

Code:

2016-02-16 10:32:59,984 INFO proxy # MAIN NEW_JOB

are just saying that the pool detected a new block, so your hashing needs to start over. Completely normal as the Ethereum block time is about 15 seconds.

At some point you should begin to see something like the below interspersed between all the MAIN NEW_JOB lines:
 

Code:

2016-02-16 17:34:22,930 INFO proxy # MAIN NEW_JOB
2016-02-16 17:34:32,384 INFO proxy # MAIN NEW_JOB
2016-02-16 17:34:40,211 INFO proxy # MAIN eth_submitWork by miner-05
2016-02-16 17:34:40,259 INFO protocol # [47ms] eth_submitWork from 'miner-05' accepted
2016-02-16 17:34:53,507 INFO proxy # MAIN NEW_JOB
2016-02-16 17:34:56,180 INFO proxy # MAIN NEW_JOB
2016-02-16 17:35:00,571 INFO proxy # MAIN NEW_JOB
2016-02-16 17:35:03,118 INFO proxy # MAIN NEW_JOB
2016-02-16 17:35:05,009 INFO proxy # MAIN NEW_JOB

Depending on your hashing speed this might take awhile, maybe even a minute or two between shares.

[megapool.io]

here is config file  MegaPool.io

Code:

# Select Ethereum ETH or Expanse EXP
COIN = "EXP"

# Host and port for your workers
HOST = "127.0.0.1"
PORT = 8080

# Coin address where money goes
WALLET = "0xb6C00B5b757C8b58cb0a478Dc479728e0Cc51900"

ENABLE_WORKER_ID = False


# Main pool
POOL_HOST = "megapool.io"
POOL_PORT = 3334

# Logging
LOG_TO_FILE = True

# Enable debug
DEBUG = False

[popmin]

s

[erro58]

Hi!

Help me please

I have a proxy on one computer on wich I have a VPN so I can mine through our Firewall wich only allows ports http://shrani.si/f/N/oV/4bZtK25r/ports.png

"Configuration file on proxy computer (local IP: 192.168.1.17)"


# Select Ethereum ETH or Expanse EXP
COIN = "ETH"

# Host and port for your workers
HOST = "127.0.0.1"
PORT = 8080

# Coin address where money goes
WALLET = "0x49298bbe974bfa25f0c32e19cde67a36a42bc62f"

# To donate please use wallet "0xea7263feb7d8a8ab0a11eedd8f1ce04412ab0820"

# It's useful for individually monitoring and statistic
ENABLE_WORKER_ID = True

# On DwarfPool you have option to monitor your workers via email.
# If WORKER_ID is enabled, you can monitor every worker/rig separately.
MONITORING = True
MONITORING_EMAIL = "x.x@gmail.com"

# Main pool
POOL_HOST = "eth-eu.dwarfpool.com"
POOL_PORT = 8008

# Failover pool
POOL_FAILOVER_ENABLE = True

POOL_HOST_FAILOVER1 = "eth-ru.dwarfpool.com"
POOL_PORT_FAILOVER1 = 8008

POOL_HOST_FAILOVER2 = "eth-us.dwarfpool.com"
POOL_PORT_FAILOVER2 = 8008

POOL_HOST_FAILOVER3 = "eth-asia.dwarfpool.com"
POOL_PORT_FAILOVER3 = 8008


# Logging
LOG_TO_FILE = True

# Enable debug
DEBUG = False

response:

http://http://shrani.si/f/3g/Ge/4BHE3UCP/proxy.png


This is ok.

But on the other computer on the same network;

Miner 970L, local IP: 192.168.1.16 (same subnet and all)

conf. file:
ethminer.exe --farm-recheck 200 -G -t 1 -F http://192.168.1.17:8080/970L

response:
http://http://shrani.si/f/34/5s/qYTmY0K/screenshot1.png

I allready tried to turn off the firewall on both computers, but it doesn't help.

What am I missing?

Thanks for helping me

EDIT:

proxy is working. I tested it with miner on the same computer.
http://shrani.si/f/2a/l/4afGYQlC/screenshot3.png

[MantaMine]

Any ideas on how to get a worker name issue I am having fixed?

Using ethOS and claymore to mine ETH using a remote config.

Can't get ETHproxy to submit shares using the ethOS assigned rig names.  This would be helpful to easily identify rigs that are crashed / not hashing as my pool sends me email alerts when a worker hasn't sent shares in XX minutes.

Thanks for any help.